|
| 1 | Electrical Items : |
| 2 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 100 meters lead as directed by Engineer- in-charge. |
| 3 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead :Thickness above 50mm |
| 4 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by manual or mechanical means, including loading, transporting, unloading away from the site or as approved by Engineer-in-charge. |
| 5 | Providing and fixing Full Solid Height Partition. Partition in 2\\"x2\\" Aluminium frame work at 2'-0\\" center to center upto the Existing Ceiling height. The frame work both sides to be covered with 12mm thk BWR plywood upto the false ceiling, finished with 4mm thk veneer and/or 1mm thk laminate with necessary inlays and grooves as per drawing. Partition at floor level to be fixed with 4\\" high skirting, made of 12mm thk BWR plywood finished with 1mm thk laminate and edges covered with approved wood beading. All veneer and beading surface to be finished with melamine polish as instructed by architects. All as per drawings and/or instructions of the architect. All materials to be approved by the architects.• both side Laminate (Scope also includes provision of cable conduits for all the electrical/networking/telephone works as per site requirements) |
| 6 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge.With 15 mm thick tegular/butt edged without perforation plain/designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G-21 |
| 7 | Supply and fixing of 1.00mm Meta cab colour coated Roofing sheet along with necessary hardware, all as per specification of OEM, etc complete. |
| 8 | Providing, fabricating and installation of MS frame structure using hollow section, angle sections and suitable anchoring nuts and bolts of TATA make incl Civil work grouting foundation, scaffolding required for erection of structure, curing, etc., complete all as per standards. |
| 9 | Providing and rendering water proofing treatment for the terrace of Annex Bldg, NFTC, consisting of following operations:a) Applying & grouting a slurry coat of neat cement using 2.75 Kg/Sqm of cement admixture with proprietary water proofing compound confirming to IS: 2645 over the RCC slab including cleaning the surface before treatment.b) Laying the cement concrete using broken bricks/brick bats 25mm to 100mm size with 50% cement mortar 1:5(1: Cement 5: Coarse sand) admixture with proprietary water proofing compound confirming to IS: 2645 to required slope and treating adjoining walls up to 300mm height including rounding of junction of walls and slabs.c) After two days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound confirming to IS 2645.d) Finishing the surface with 20mm thick joint less cement mortar of mix 1: 4 (1 : Cement 4: Coarse sand ) admixed with proprietary water proofing compound confirming to IS: 2645 and finally finishing the surface with trowel and neat cement slurry and making of 300 x 300mm square.e) The whole terrace so finished shall be flooded with water for a period of two weeks for curing and final tests. The average thickness of 120mm and min thickness at khurra 65mm.f) All above operations to be in order and as directed and specified by Engineer in charge and service guarantee shall be given for a period of 07 years from the date of completion. Any defects noticed during this period shall be rectified immediately at the risk and cost of contractor.OrAny other suitable Technology & methodology and chemical required as per site condition and complete all as per OEM specification to arrest water leakage to the above said building. |
| 10 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 11 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour |
| 12 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade (2 or more) and colour. |
| 13 | French spirit polishing of approved shade with two or more coats including a coat of wood filler etc complete as per ADA instructions. |
| 14 | Provision of cement concrete structure of Hight of 1‘6”. The work includes construction of brick solid structure of size 5’ x 5’ x 1’6” including all materials, labor etc., |
| 15 | Providing, fabricating & installation of wall mounted wooden storage units of depth 450 mm, made out of 18mm thick ply wood, external surface finish with 01mm thick laminate and all exposed side finish with teakwood beading, internal surface finished with 0.80 mm laminate, with standard hardware’s such as lock, C type PC handles, piano hinges, skirting, locking arrangement, etc. complete neat and attractive finish, including transportation, shifting, labor etc,. all work completed as per instructions of Site Engineer in charge. |
| 16 | Repair towards the main door of size 2.00 X 2.10m includes polishing, hardwares if required, all work completed as per instructions of Site Engineer in charge |
| 17 | Wall Paneling:Providing & fixing 19mm thick ply skinning on existing wall. The work includes fixing by 25mm screws at every 300mm centre to centre. The Ply skinning as per detail drawing.Providing & fixing 01 mm thick laminate panelling of approved laminate over existing 19mm thick commercial ply, complete as per the detail drawing.Charge towards supply and installation of WPVC ribs paneling as per the drawing and instructions of ADA.Surface: Veneer as per client approval Width of Rib: 125mm. Length of Rib 2.7m.The work includes necessary surface preparation and removal of raceways, sockets if any as per the instructions of Engineer in charge. |
| 18 | False Ceiling for Conference Hall:Providing & fixing of hybrid type false ceiling (Combination of Gypsum board ceiling at the edges and Grid type false ceiling at the center portion), all as per OEM specification, hot dipped galvanized steel grid frame work surface chemically cleaned capping pre-fabricated in baked polyester paint, main tees of size 33 x 24 x15 mm to form a grid, suspended from RCC roof using 2 mm adjustable GI rod and 6 mm nylon raw plug at every 1200 mm intervals, supply & laying mineral fiber acoustic ceiling tiles of size 600 x 600 mm x 15 mm over the formed grid. (VUNUS III pattern of regular edge) The board shall be fire rating of 60 minutes as per BG 47g/23 of 1987, light reflection above 85%, noise reduction coefficient (NRC) of 0.55 to 0.66 sound attenuation of 32 db and humidity resistance up to 95% at 50oC including making Provision for opening and for light fittings, Cassette type A/C etc, complete all as per sample available at ADA. |
| 19 | Electrical Works:Supply & drawing of Sub – Circuit 2 runs of 2.5 Sq.mm + 1 run of 1.5 Sq.mm FRLS PVC insulated copper conductor, single core cable in the surface/recessed steel/PVC conduit as required.(For UPS Power Circuit) |
| 20 | Supply & drawing of Sub – Circuit 2 runs of 2.5 Sq.mm + 1 run of 1.5 Sq.mm FRLS PVC insulated copper conductor, single core cable in the surface/recessed steel/PVC conduit as required.(For RAW Power Circuit) |
| 21 | Supply & installation of 1 no. of 5/15A Power socket outlet controlled by 20A single pole switch with indicator housed in PVC boxes, Fitted at sitting desk as required by client (3 modular box brown colour for RAW Power Points) |
| 22 | Supply & installation of 3 no’s of 5/15A Power socket outlet controlled by 20A single pole switch with indicator housed in PVC boxes, Fitted at sitting desk as required by client (8 modular box white colour for UPS Power Points) |
| 23 | Supply and fixing of 2x2 feet 40w square LED fittings of false ceiling type and including necessary fixing accessories. |
| 24 | Supply & installation of 8 no. of 5A single pole switch housed in PVC boxes, Fitted at entrance of cabin as required by client |
| 25 | Supply and installation of 6( 4+18) Way double door 415 V 3 phase in recess, complete with tinned copper bar neutral bus bar, earth bar interconnection as required Distribution board(For AC) |
| 26 | Supply and installation of 63A, 4 pole 415 V MCB as an incomer in the distribution board with interconnection as required |
| 27 | Supply and installation of 10A single pole 230V MCB in the distribution board with interconnection as required |
| 28 | Supply and installation of 25 Sq mm XLPE insulated 4 core aluminium armoured with aluminium conductors in recess/ surface and interconnection as required. |
| 29 | Water booster Pump of 75 W 24V DC for pumping water from Tower Ac Indoor |
| 30 | Supply and installation with proper end termination of 25 Sqmm cable on both the side |
| 31 | Networking system:48 Port 100/1000 Managed switch with 4 combo SFP slots ( 48 RJ-45 10/100/1G BaseT, 2xSFP(1G) and 4xSFP+ (1G/10G) uplink/ stacking ports) |
| 32 | 24 Port 100/1000 Managed switch with 4 combo SFP slots ( 24 RJ-45 10/100/1G BaseT, 2xSFP(1G) and 4xSFP+ (1G/10G) uplink/ stacking ports) |
| 33 | Cat6 UTP Cable 23AWG (305m x 1 Box) |
| 34 | 24Port Cat6 UTP Patch Panel Fully Loaded |
| 35 | IO/Kye stone |
| 36 | CAT6 Dual IO/ Face plate |
| 37 | CAT6 4*4 IO/ Back Box |
| 38 | 24- slot Cables manager |
| 39 | Cat6 UTP Patch cord 1mtr |
| 40 | Cat6 UTP Patch Cord 2mtr |
| 41 | 100mm x 50mm Casing Capping with Accessories |
| 42 | 50mm x 50mm Casing Capping with Accessories |
| 43 | 1.5-Inch Casing & Capping with Accessories |
| 44 | 32mm PVC Conduite Pipe with Accessories |
| 45 | 25mm PVC Conduite Pipe with Accessories |
| 46 | Work Accessories Wood Ghatta, Screws, Flexible Hose, Cable Tie, Insulation Tap, Labelling & Numbering Ferules…....etc |
| 47 | Intstallation Charges:Laying of Cat6 UTP Cable |
| 48 | Laying of 100mm x 50mm, 50mm x 50mm & 1.5 Inch Casing Capping with Accessories |
| 49 | Laying of 32mm & 25mm PVC Conduite Pipe with Accessories |
| 50 | Termination of Cat6 UTP Patch Pannel Fully Loaded |
| 51 | Termination of Cat6 IO/Kyestone Yellow |
| 52 | Fixing of Cat6 IO/Back Box |
| 53 | Fixing of Cat6 Dual Face Plate |
| 54 | Fixing of 24 Slot Cable Manager |
| 55 | Lan Points Testing |
| 56 | Labelling & Ferruling Documentation |
| 57 | AUDIO AND VIDEO SYSTEM:Supply of 85” Non touch Display 4K UHD Commercial Digital signage display input HDMI 3 DP DVI Audio |
| 58 | Multi Calling Video Conferencing codec |
| 59 | Video Processer 4HDMI interface 4 USB interface support FHD resolution |
| 60 | Ceiling Tile Microphone with Inbuilt Beam Array Microphone 25Ft Radial Rickup 2X Line output 1X Line Input USB audio port for unified communication with Inbuilt Digital Signal Processor |
| 61 | PC preferred Micro Form Factor suitable for Video conference apps Windows 10 Pro Minimum 8GB RAM Minimum 500GB SSD Hard disk Minimum |
| 62 | Audio & Video Digital Signal Processor |
| 63 | 15’ HDMI 2.0 Cable (05 Meter) |
| 64 | Full High definition PTZ Camera with 10X Optical zoom 12.7 HD CMOS sensor HDMI 2.0 and USB 3.0 SYNCHRONOUS Video output 1080p60 resolution on both HDMI and USB 3.0 Interface |
| 65 | Powered USB 2.0 Cable (10Meter) |
| 66 | 27’ Active optical HDMI Cable (10Meter) |
| 67 | 27’ Active optical USB 3.0 Cable (10Meter) |
| 68 | Wireless AV Gateway and Switching System: Wireless presentation switching device for unified communication |
| 69 | Powered Speaker pair 30 watt X2 |
| 70 | Wireless Keyboard and Mouse |
| 71 | Installation, Testing and Commissioning of Audio and Video system including necessary wiring, fittings, labor, transportation, loading & unloading charges,. etc all complete as per ADA instructions. |
| 72 | FURNITURE WORKS:Sc ‘G’ TableDesking -Premium suit model of size 210*210*75 cm (Main Table +ELU+PED).Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire managementSecondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to topPedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestals are provided with lock for security. |
| 73 | Sc ‘G’ Back unitBack unit-Premium suite model of size 165cm (Back unit)The Back unit size shall be of : 1850 Width mm x 560 Depth mm x 670 Height mm. The door shall be 23 mm thick ( 18 mm thick Batons + 4 mm Veneer + 1 mm Backing Decorated ( BDL) ) . The Shelves and Partitions should be of 18 mm thick MDF (Medium density fiber) + Pigmented Black and coated with Melamine.Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC Contd…..membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom, back and shelves.Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security. Display/Storage Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, back and shelves. Doors are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on top.Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. |
| 74 | Sc ‘G’ HB ChairSupply & Installation of High Back revolving chair. Overall Dimensions of Chair-Seat Height - min 49.9 to max 58.9 cm. Total Height - min 134.9 to 143.9 cm. Width & Depth of Chair as measured from pedestal - Width 77 cm and Depth 77 cm• Seat/back assembly: The seat should be made up of 1.2 ± 0.1cm. Thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. The back foam should be designed with contoured lumber support for extra comfort. back size: 53.0cm.(w) x 95.4cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) the hr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thkhr steel and should be black powder-coated (dft 40-60 microns ) Armrest assay: the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s.e.r.w. support tubes and chrome plated. The p.u. armrest should be made of black integral skin polyurethane with 50-70 shore hardness and reinforced with m.s. insert. the armrest top should be made of abs & upholstered with foam & leather The mechanism should be designed with the following features: * 360° revolving type, * seat back tilting ratio of 1 : 1.5* Front pivot for tilt with feet resting on ground ensuring more comfort, * tilt tension adjustment.* 5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock should be released* Static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking. it has an adjustment stroke of 9.0 ± 0.3cm the bellow should be 1 piece and blow moulded in black polypropylene the pedestal should be made of die-cast aluminum with buffing finish. it should be fitted with 5nos. Contd…..twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-centre dia. (77.0 ± 1.0cm with castors) the twin wheel castors should be injection moulded in black nylon. |
| 75 | Sc ‘G’ MB Chair• Supply& installation Mid Back revolving chair without Tilting Mechanism. • The seat should be made up of 1.2 ± 0.1cm. Thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. The back foam should be designed with contoured lumber support for extra comfort. • Back size:53.0cm.(w) x 73.0cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) thehr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thkhr steel and should be black powder-coated ( dft 40-60 microns ) the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s.e.r.w. support tubes and chrome plated. The p.u. armrest should be made of black integral skin polyurethane with 50-70 shore hardness and reinforced with m.s. insert. The armrest top should be made of abs & upholstered with foam & leather the seat base assy. should be designed with following features: 360° revolving type without back tilt. It has an adjustment stroke of 12.0 ± 0.3cm the bellow should be 3 piece telescopic types and injection moulded in black polypropylene the pedestal should be made of die-cast aluminum with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-centre dia. (77.0 ± 1.0cm with castors) the twin wheel castors should be injection moulded in black nylon.• Overall Dimensions of ChairSeat Height - min 43.4 to max 55.4 cm. Back Height - min 99.4 to 111.4 cm. |
| 76 | 03 Seater sofaSupply & Installation of 03-SEATER SOFA• SEAT FOAM: The seat is made up of PU foam in Density 28 ±2 kg/cum with an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette.• BACK FOAM: The back is made up of PU foam in Density 28 ± 2 kg/cum with two additional top layer of super soft foam of density 32±2 kg/cum, upholstered with fabric or leatherette.• UNDERSTRUCTURE: Under structure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS: 303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over under structure for cushioning purpose.• LEG ASSEMBLY: It is a welded Assembly made in Contd…..Stainless steel (grade SS 202) tube & plate with plastic end cap. Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45CM. |
| 77 | 01 Seater sofaSupply & Installation of 01-SEATER SOFA• SEAT FOAM: The seat is made up of PU foam in Density 28 ±2 kg/cum with an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette.• BACK FOAM: The back is made up of PU foam in Density 28 ± 2 kg/cum with two additional top layer of super soft foam of density 32±2 kg/cum, upholstered with fabric or leatherette.• UNDERSTRUCTURE: Under structure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS: 303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over under structure for cushioning purpose.• LEG ASSEMBLY: It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic end cap. Width (W): 86.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45CM. |
| 78 | Supply & installation of Centre Coffee table with glass top, wooden legs 100 x 65 x 45 mm.• Overall Size : Width : 100cm Depth : 65cm Height : 45cm TABLELEGS METERIALS: Colour :cherry• TABLE TOP MATERIALS & SIZE: (tempered Glass/ 10mm), L X W X T: 1000x650x10mm Colour: clear. |
| 79 | Sc ‘F’ TableDesking -Premium suit model of size 180*210*75 cm (Main Table +ELU+PED).Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire managementSecondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thick MDF one side pre-Contd…..laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to topPedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Pedestals are provided with lock for security. |
| 80 | HB Chair for Sc ‘F’Chair: large seat Depth + cross headrest + Coat hangerSEAT/BACK ASSEMBLY: The seat is made up of 1.2 * 0 fern thk hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 The Back is made up of injection moulded glass filled nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam Sandwich in lumbar area.* SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D)* SEAT SIZE(Standard Seat Depth) 47 0 cm. (W) x 49.5 cm. (D) ” BACK SIZE : 45.0 cm. ”(W) x 65.3 cm. (M)HIGH RESILIENCE (HR) POLYURETHANE FOAM The HR poly methane seat foam is moulded with density 45+/-2 kg/m\\"\\" and hardness 16 + 2 kgf as per IS:7888 for 25% compression.ARMRESTS: The adjustable armrest is designed with the following features» Up-Down adjustment— 8 steps (8.0+0.Scm range)• Height adjustable armrest structure which is Powder Coated & fitted with an armrest top.• Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad The Height of Lumbar pad can be Contd….adjusted through two projecting knobs provided on the rear side of the pad Lumbar pad has an adjustment of 8 0 + 0.5 cm in Contd…height. FRONT PIVOT SY!’JCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. |
| 81 | MB Chair for Sc ‘F’Supply of MID BACK CHAIR of Overall Dimensions shall be Chair-Seat Height - min 43.3cm to max 54.3cm. Height - min 89.5cm to max 100.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3cm and Depth- 76.3cm.Seat assembly: The seat assembly shall be made up of 1.2 ±0.1cm thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded polyurethane foam. Seat size: 47.0 cm. (w) x 48.0 cm. (d) Back assembly: The back asembly. shall be made of powder coated (oft 40-60 Contd…..microns) tubular frame of 0 2.54 ±0.03cm. x 0.2±0.016cm.thick. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using double layer spacer mesh fabric with high tenacity yarn. Back size : 46.5 cm (w) x 60.5 cm (h).High Resilience (HR) polyurethane foam: The HR polyurethane foam shall be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. Armrests: The one-piece armrests shall be injection moulded from black co-polymer polypropylene. Centre-Tilt mechanism: The mechanism shall be designed with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre • upright position locking. tilt tension adjustment. Pneumatic height adjustment: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.Telescopic bellow assy: The bellow shall be 3 piece telescopic type and injection moulded in black polypropylene. Pedestal assembly: The pedestal shall be injection moulded in black 33% glass-filled nylon66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm. Pitch-center dia. (76.3 ±1.0cm with castors.)Twin wheel castors: The twin wheel castors shall be injection moulded in black nylon etc. |
| 82 | Sc ‘E’ TableDesking -Premium suit model of size 165*180*75 cm (Main Table +ELU+PED).Supply of ‘L’ shaped Table of size shall be 1650mm(L) x 750mm(D) and Return Table 1200mm(L) x 450mm(D) with one side attached Frame of Fabric Magnetic and White board. Work top shall be made up of 25mm thick prelaminated particle board interior grade (As per IS: 12823). Bottom shall have a backing laminate of minimum 0.6mm thickness. All the edges of work surface shall be provided with machine pressed 2mm thick PVC Edge band with glue of standard quality. The single side legs shall be used for supporting panels & work surface on one side only. Single side legs shall be fabricated by CO2 welding in MS Tube of section 38 mm x 25 mm (IS: 7138 ERW Tube) with the base plate of the MS plate of 35x22x5mm (IS: 2062, 5 mm HR) over which an M8 Leveler shall be fitted, which shall allow for adjustment of the height by 50mm and this shall be coated with minimum 45 micron thickness of epoxy powder coating. Body Panel Structure: uprights and horizontals shall be made of aluminum extrusion having material AL96063-T6 or equivalent and shall have an average wall thickness of 1.2 mm and also powder coated with epoxy-polyester powder. Fabricated bottom frame for 52.4mm shall be comprises of L- Channels and it shall be made of 2mm thick CRCA steel (IS:513), formed plates of 3mm thick HR steel (IS:2062) & ERW steel tube of size 35x15x1.6mm in oval cross section (IS:7138) welded together. This shall be coated with average 50 to 60 micron thickness of epoxy powder coating. The 52.4 mm panel has more elaborate and flexible construction offering various functional and decorative finishes as well as cable management capacity. |
| 83 | HB Chair for Sc ‘E’Chair: large seat Depth + cross headrestSEAT/BACK ASSEMBLY: The seat is made up of 1.2 * 0 fern thk hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 The Back is made up of injection moulded glass filled nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam Sandwich in lumbar area.* SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D)* SEAT SIZE(Standard Seat Depth) 47 0 cm. (W) x 49.5 cm. (D) ” BACK SIZE : 45.0 cm. ”(W) x 65.3 cm. (M)HIGH RESILIENCE (HR) POLYURETHANE FOAM The HR poly methane seat foam is moulded with density 45+/-2 kg/m\\"\\" and hardness 16 + 2 kgf as per IS:7888 for 25% compression.ARMRESTS: The adjustable armrest is designed with the following features» Up-Down adjustment— 8 steps (8.0+0.Scm range)• Height adjustable armrest structure which is Powder Coated & fitted with an armrest top.• Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad Lumbar pad has an adjustment of 8 0 + 0.5 cm in height. FRONT PIVOT SY!’JCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. |
| 84 | MB Chair for Sc ‘E’Supply of Mid Back Chair of size shall be: SEAT SIZE (Larger Seat Depth): 47.00cm (W) x 51.50cm (D), SEAT SIZE (Standard Seat Depth) 47.00cm. (W) x 49.50cm.(D), BACK SIZE: 45.00 cm(W) x 65.3cm(H). The seat shall be made up of 1.2 + 0.1cm thick hot-pressed plywood. The Back shall be made up of injection moulded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam shall be moulded with density 45+/-2 kg/cum and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest shall be designed with the following features: Up-Down adjustment— 8 steps (8 0+0.Scm range). Height adjustable armrest structure which shall be powder coated & fitted with an armrest top. Fixed Armrest Top shall be PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on Contd…..the rear side. Lumbar pad shall be an adjustment of 8.0 + 0.5 cm in height. |
| 85 | Providing & fixing of modular 'L' Type customized modular work station of size 1750mm (L) x 600mm (W) x 1200mm (H) each, the table top made out of 25mm thick pre-laminated particle board with PVC edge, the under structure made out of 25mm thick Pre-laminated particle board, Cable manager to be provided on the work surface and accessed through grommet cut out on the worktop, incl vertical movements of wires including Keyboard tray and CPU Trolly. Partition should be 75mm thick, made out of PLB either side, one number white board per person rest fabric magnetic, all bottom tile metal powder coated, partition height 1.20 m height with cable race ways at two level for drawing power / data / voice cable, height adjustable fixtures as per existing arrangement / shade. Stability of the structure individually and totally will be the responsibility of the vendor. All as per OEMs specification and sample available at ADA. |
| 86 | Providing & fixing Rectangular Modular work station (for printer) of size 1200mm (L) – 600mm (W) x 750 (H) each, the table top made out of 25mm thick pre-laminated particle board with PVC edge, the under structure made out of 25mm thick Pre-laminated particle board, Cable manager to be provided on the work surface and accessed through grommet cut out on the worktop, incl vertical movements of wires incl Keyboard tray and CPU Trolly. All bottom tile metal powder coated, partition height 1.20 m height with cable race ways at two level for drawing power / data / voice cable, height adjustable fixtures as per existing arrangement / shade. Stability of the structure individually and totally will be the responsibility of the vendor. All as per OEMs specification and sample available at ADA. |
| 87 | MB Chair for Work stationSupply of Mid Back Chair of size shall be: SEAT SIZE (Larger Seat Depth): 47.00cm (W) x 51.50cm (D), SEAT SIZE (Standard Seat Depth) 47.00cm. (W) x 49.50cm.(D), BACK SIZE: 45.00 cm(W) x 65.3cm(H). The seat shall be made up of 1.2 + 0.1cm thick hot-pressed plywood. The Back shall be made up of injection moulded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam shall be moulded with density 45+/-2 kg/cum and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest shall be designed with the following features: Up-Down adjustment— 8 steps (8 0+0.Scm range). Height adjustable armrest structure which shall be powder coated & fitted with an armrest top. Fixed Armrest Top shall be PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad Contd…..can be adjusted through two projecting knobs provided on the rear side. Lumbar pad shall be an adjustment of 8.0 + 0.5 cm in height. |
| 88 | Providing and fixing of 03 Drawer Mobile pedestal of size 390mm (L) x 435mm (W) x 646mm (H) (Box + Box + File) all as per OEM Specification and sample available at ADA. |
| 89 | Conference Table-Wooden: Providing & fixing conference table consisting of 25mm thick three layered Block board and table top 4mm MDF Sheet with both side 1mm thk approved color, shade laminate and inside use 1mm thk white color laminate finish. Table top edge banded PVC tape & front side wooden beading polishing, 18 mm thick plywood with both side laminate Modesty, Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge, Table thickness approximately31mm, 11880mm(L)x600mm(W)x750mm(H). All necessary cutouts etc. All as per the instructions of Engr I/c. |
| 90 | Conference chairSupply and installation of Mid back chair for office meeting room chair(01 HM for BOSS and remaining mid back chair). The knee tilt multi lock mechanism makes you feel like you are sitting on a cushion of air as it creates a smooth and balanced feel as you move from one position to the next Push the left-side lever up/down to unlock/lock reclining at multiple positions Seat:Depth- 45 cm, Width- 51 cm Dimensions: Width- 59 cm, Depth- 53 cmMinimum Height- HB: 112 cm; MB: 100 cmMaximum Height- HB: 107 cm; MB: 91 cmMinimum Seat Height- 52 cmMaximum Seat Height- 59 cmWidth (Arm to Arm)- 52 cmArm Rest Height- 23 cm Please Enable Macros to View BoQ information |
