Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of brick / block or stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed. |
| 2 | M&L for cutting into old masonry to form toothings for bonding in new brick or stone work including making good in CM 1:6 complete all as specified and directed. |
| 3 | M&L for squared rubble walling, Jodhpur type, regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed. |
| 4 | All as per item No. 3 here-in-above, but except stone complete all as specified and directed. |
| 5 | M&L for PCC solid building blocks 10cm thick type B1 1:2:4 set in CM 1:6 complete all as specified and directed. |
| 6 | Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 8 | M&L for 25mm thick Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) in sub base, floors, pavings complete all as specified and directed. |
| 9 | M&L for 15 mm thick screed bed or bedding layer in CM 1:6 for laying in floors finished even and rough to receive tiling/floor finishes complete all as specified and directed. |
| 10 | M&L for non-skid coloured ceramic tiles joint free 7 to 8mm thick (Square/Rectangular) area of each tiles exc 0.18 Sqm but n exc 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 11 | All as per item No. 10 specified here-in-above, but on skirting over 10mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 12 | M&L for non-skid coloured ceramic tiles joint free 6 to 7mm thick (Square/Rectangular) area of each tiles not exc 0.18 Sqm set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 13 | M&L for glazed colour ceramic tiles (premium quality) of size 300X450X7 mm thick, laid in vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles (High-lighter pattern), over & including M&L 10mm thick backing coat in CM (1:4) over stone masonry surfaces finished even and rough to receive tiling etc complete all as specified and directed. |
| 14 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed. |
| 15 | M&L Machine cut kota stone slab 18 to 20 mm thick as in floor, cooking platform laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including M&L 15mm thick screed bed in CM 1:6, complete all as specified and as directed. |
| 16 | M&L for mirror polished kota stone slab 18 to 20 mm thick, machine cut, in riser of steps (single piece), skirting, dado and pillar laid over cement and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including backing coat of 10mm thick in CM 1:3 complete all as specified and directed |
| 17 | M&L for 18 to 20mm thick Machine cut kota stone slab as in shelves (single piece) fixed in walls, shelves, partition, slab etc laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and polishing complete complete all as specified and directed. |
| 18 | M&L 18 to 20 mm thick granite stone (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platform & similar nature works, machine cut, best quality as per sample, over & including 20 mm thick screeding in CM1:3, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & providing necessary holes for gas pipe / water supply pipes etc complete all as specified and as directed. |
| 19 | Taking down existing cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 20 | M&L for rendering 15mm thick in CM 1: 4 on stone masonary surfaces finished even and smooth using water proofing compound without using extra cement complete all as specified and directed. (WPC shall be measured and paid separately) |
| 21 | M&L for rendering 10mm thick on fair faces concrete surfaces in CM 1:3 and finished even and smooth in ceilings/fascia without using extra cement complete all as specified and directed. |
| 22 | M&L for rendering 15mm thick in CM 1: 6 on stone masonary surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | Supply only integral water proofing compound complete all as specified and as directed. |
| 24 | M&L for raking out joints/ pointing to to squared rubble masonry, jodhpur type regular course built in CM 1:3 all as specified. |
| 25 | M&L for keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified. |
| 26 | M&L for preparing new plastered surfaces of walls and applying two coat of Oil Bound distemper over 2mm thick wall care putty over a coat of alkali resistant primer and complete all as specified and directed. |
| 27 | M&L for complete removal of existing distempered surfaces of wall and applying two coat of Oil Bound distemper over 2mm thick wall care putty over a coat of alkali resistant primer and complete all as specified and directed. |
| 28 | M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 29 | M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 30 | M&L for applying one coat of white wash on old surface of wall complete all as specified and directed. |
| 31 | M&L for applying one coat of white wash on old surface of ceilings complete all as specified and directed. |
| 32 | M&L for preparing newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whiting of surfaces complete all as specified and directed. |
| 33 | M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 34 | M&L preparation of new wood surfaces over 10 CM width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 35 | M&L preparation of steel and steel base surfaces over 10 CM width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 36 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed. |
| 37 | Taking down Chowkats or frames exceeding 1.5 Sq. M each and n exceeding 4.0 Sqm each (Without taking off shutters from the frames) complete all as specified and directed. |
| 38 | Taking down shutters of any description exc 1 Sqm each but n exc 2 Sqm each complete all as specifed |
| 39 | S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 40 | S&F mild steel framed work as in brackets etc for cooler stands etc framed steps/stairs etc complete using MS angle iron steel bars, gusset plate etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 41 | S&F mild steel work as in stairs, hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 42 | S&F mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates bracket framing including distance pieces, cleats etc Fe 410-W (Gde- E- 250) quality A complete all as specified and directed. |
| 43 | M&L for UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory colour finish) polyvinyl chloride (PVC) sheet frame of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, all as per manufracturers specifications, complete all as specified and as directed. |
| 44 | M&L for 18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed . |
| 45 | S&F 30 mm width of FI continious piano hinges, stainless steel, complete assembly complete all as specified and directed. |
| 46 | Extra over solid PVC sheet for fixing 18 mm width & 2-3 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails, complete all as specified and as directed. |
| 47 | S&F '0' degree clip type self closing hinges for cabinets fixed with cadimum coated screws, complete all as specified and as directed. |
| 48 | S&F 75mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers complete all as specified and directed. |
| 49 | S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as specified and directed. |
| 50 | S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers complete all as specified and directed.. |
| 51 | M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil as per sample complete all as specified and directed. |
| 52 | S&F of 2nd class hardwood 35mm thick gauzed/Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24, supplied and fitted to chowkats complete all as specified and including following as directed :-(a) SS wire cloth 0.36mm nominal dia of wire, average width of aperture 1.40mm fixed with SS wire staple.(b) Aluminium Grill Medium grade mess size 50x50mmx5mm , fixed at outer edge at outer edge of door.(c) Apply one coat of Pink-Primer |
| 53 | S&F for Flush shutters 35 mm thick, solid core construction and plywood face is covered with decorative face with sunmica / veneer with lipping frame edging to match with mortic lock and handle complete all as specified and directed. |
| 54 | S&F for 35mm thick IInd Class HW factory made partly gauged/glazed and partly panelled shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed and including following as directed :-(a) SS wire cloth 0.36mm nominal dia of wire, average width of aperture 1.40mm fixed with SS wire staple.(b) Aluminium Grill Medium grade mess size 50x50mmx5mm , fixed at outer edge at outer edge of door.(c) Apply one coat of Pink-Primer |
| 55 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: (a)-For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(b)- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 56 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 57 | Taking down steel window / ventilator complete all as directed. |
| 58 | S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified (with or without cooler opening as directed by Engr-in-charge) as shown on drg No CEJZ/TD/20 of sheet 1/3 to 3/3 complete |
| 59 | S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. (with or without cooler opening as directed by Engr-in-charge) as shown on drg No CEJZ/TD/20 of sheet 1/3 to 3/3 complete |
| 60 | S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified |
| 61 | S&F Factory made box type steel ventilator without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified |
| 62 | S&F of aluminium anodized tower bolt of size 200 mm long incl necessary screw complete all as specified and directed. |
| 63 | S&F aluminum anodised handle of size 150mm long necessary \\"Bow Handle D type\\" complete all as specified and directed. |
| 64 | S&F aluminium alloy anodised sliding door bolt woth hasp and staple (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed. |
| 65 | S&F stainless steel butt hinges 100 mm size for WPC door complete all as specified and directed. |
| 66 | S&F of mild steel butt hinges 100 mm size complete all as specified and directed. |
| 67 | S&F 100mm size single action door spring hinge complete all as specified and directed. |
| 68 | S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring with overall length of cover plate 140mm long complete all as specified and directed. |
| 69 | S&F 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed. |
| 70 | S&F 3 mm thick plain glass ordinary quality & glazing complete all as specified and directed. |
| 71 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed. |
| 72 | S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface complete all as specified and directed. |
| 73 | M&L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast iron fixing,coping, chamfered edges including necessary form workcomplete all as specified and directed. |
| 74 | S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item complete all as specified and directed. |
| 75 | S&F in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets (trade pattern) fixed to walls complete with two nos decorative stainless steel knobs (fincals round type with mirror optic finish) at each end, sample as approved by GE, complete all as specified and as directed |
| 76 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide 600mm long with aluminium alloy brackets and gaurd and railing 60cm long complete all as specified |
| 77 | S&F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass of size 250 mm conical shape /size with CP brackets, gaurd and railing complete all as specified and directed. |
| 78 | S&F in repair wall mounted Stainless steel Soap dish of size 125x75mm any type, fixed to plugs with chromium plated brass screws complete all as specified. |
| 79 | S&F in repair CP brass towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and plastic rawl plugs/cleats, complete all as specified and directed. |
| 80 | S&F in repairs Bevelled edge mirror size 600x450mm of selected quality glass mounted on PVC frame fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 81 | S&F in repair stainless steel chromium plated peg set of six fixing with wall screws and plastic rawl plugs/cleatscomplete all as specified and directed. |
| 82 | S&F in repair Stainless steel kitchen sink with drainage board, made of stainless steel 1.00 mm thick, with plugs, washers and wastes pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mm x 450mm, bowl size 410mm x 330mm x 160mm complete all as directed by Engr-in-Charge. |
| 83 | S&F in repairs stainless steel Plate Racks made of stainless steel 0.60 mm thick with plugs, washers and fixed with bolts /screws of size 750 X 600 X 250 mm complete all as specified and directed. |
| 84 | S&F in repairs Vitreous China Squatting pan of Orrisa pattern, long pan, size 580mm x 410mm white with `P' or `S' trap, front or back inlet and integral foot rests any pattern including connection to trap and to flushing pipe, anti syphonage pipe etc complete all as specified and directed. |
| 85 | S&F in repairs vitreous china wash down water closet Anglo Indian Type pedestal pattern with seat & cover complete incl fixing of long bend flush pipe etc complete all as specified and directed. |
| 86 | S&F in repair vitreous china wash basin, white flat/corner back size 450x300 mm including, waste pipe, waste coupling MS brackets complete all as specified and directed. |
| 87 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore acomplete all as specified and directed. |
| 88 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore complete all as specified and directed. |
| 89 | S&F 100 mm dia Cast iron soil waste and vent pipes in any length with or without ears with lead joints laid in trenches or in floor complete all as specified and directed |
| 90 | S&F 75 mm dia Cast iron soil waste and vent pipes in any length with or without ears with lead joints laid in trenches or in floor complete all as specified and directed |
| 91 | S&F 100 mm dia Cast iron soil waste and vent pipes in any length with or without ears with lead joints fixed on wall complete all as specified and directed |
| 92 | S&F 75 mm dia Cast iron soil waste and vent pipes in any length with or without ears with lead joints fixed on wall complete all as specified and directed |
| 93 | S&F 100 mm CI branch pieces single socketed Y equal or unequal fixed with lead joints complete all as specieied and directed. |
| 94 | S&F 75 mm CI branch pieces single socketed Y equal or unequal fixed with lead joints complete all as specieied and directed. |
| 95 | S&F 100mm CI bends any radius fixed with lead joints complete all as specified and directed |
| 96 | S&F 75 mm dia CI bend with oval acess door fixed to pipe fixed with lead joints complete all as specified and directed. |
| 97 | S&F 100mm dia CI vent cowl fixed to pipe complete all as specified and directed. |
| 98 | S&F 75 mm dia CI floor trap plain with grating including jointing with solvent cement 75mm dia complete all as specified and directed. |
| 99 | M&L in repair for 150x150mm size, type P salt glazed stone ware gully traps,square moulded fixed complete all as specified and directed. |
| 100 | S&F in repairs 15 mm bore long body bib cock with wall flange and aerator, brass chromium plated with fancy type and screwed down to 15 mm bore GI tubing or for brass ferrule complete all as specified and directed. |
| 101 | S&F in repairs angle stop valve with wall flange 15 mm bore of pipe, brass chromium plated, long thread, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 102 | S&F in repairs two way angular stop cock 15mm bore with wall flange, chromium plated brass, long thread, fancy type, complete all as specified and as directed. |
| 103 | S&F in repairs CP Hand Shower (Health Faucet) with 8mm dia, 1.2 Mtr long flexible tube & wall hook with N.R.V (Back flow preventer), 15 mm dia complete all as specified and directed. |
| 104 | S&F in repairs 15mm bore swan neck pillar taps with aerator, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 105 | S&F in repairs 15mm bore CP central hole basin mixer single cock wall mounted swing spout popup waste system with 450mm long copper pipe and brass nuts ISI Marked complete all as specified and directed. |
| 106 | S&F in repairs chromium plated Wall mixture 3-in-1 system fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure pipe 15mm bore, Hot or Cold, screwed for iron pipe with adujstable wall flange and legs complete all as specified and directed. |
| 107 | S&F in repair of chromium plated shower rose 150x150mm dia square with shower arm complete all as specified and directed. |
| 108 | S&F 10 ltrs capacity PVC valve less, ISI Marked syphonic action type, flushing cistern, low level, with Anti Bacterial Knob, with inlet, ball valve, float and handle including brackets and PVC connection, cistern colour shall be match WC colour, complete all as specified and as directed. |
| 109 | S&F in repairs 750 Ltrs capacity of tank rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position white/coloured including tank led cover with fixing arrangement inlet/outlet/over flow checknut etc complete all as specified and directed. |
| 110 | S&F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 111 | S&F in repair 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia complete all as specified and directed. |
| 112 | S &F in repair 20 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20mm dia complete all as specified and directed. |
| 113 | M&L for 100 thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in water tank platform over roof top finished even and smooth complete all as specified and directed. |
| 114 | Demolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise complete all as specified and directed. |
| 115 | M&L for providing precast cement concrete slabs type B1 1:2:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 complete all as specified and directed. |
| 116 | M&L 50mm thick sand stone slabs machine cut in sunshades, chajjas, shelves, cills, landings cover slabs on manholes stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness complete all as specified and directed. |
| 117 | Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed. |
| 118 | All as per item No 117.00 here-in-above, but size of pipe 20 mm bore. |
| 119 | All as per item No 117.00 here-in-above, but size of pipe 15 mm bore. |
| 120 | S&F of water GI tubing 25 mm bore, medium grade, galvanized, with all fittings fixed to wall, ceilings or laid in floors, complete all as specified and as directed. |
| 121 | All as per item No 120.00 here-in-above, but size of pipe 20 mm bore. |
| 122 | All as per item No 120.00 here-in-above, but size of pipe 15 mm bore including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed. |
| 123 | Demolition of reinforced cement concrete of any description for roof,colums, beam of any type etc complete all as specified and directed. |
| 124 | Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and directed. |
| 125 | Form work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces complere all as specified and directed. |
| 126 | Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete all as specified and directed. |
| 127 | M&L RCC design mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chajja and in shelve etc complete all as specified and directed. |
| 128 | M&L RCC M-25 design mix (using 20mm graded aggregates) as in Beams, roof beam, cantilevers, bressummers, lintels beams etc complete all as specified and directed. |
| 129 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns hooking ends cutting bending and binding with mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 130 | All as per item No.129 specified here-in-above, but of 6 to 8mm dia bars complete all as specified and directed. |
| 131 | All as per item No.129 specified here-in-above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 132 | M&L for 30 mm thick guniting in patches on to the required area on RCC columns, beams, stairs, lintels, retaining walls, sunshades, roofing slab etc. of all sizes and shapes at any heights from existing ground floor and at any locations with cement and mortar 1:2 (1 cement : 2 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete as specified here in before and applying one coat of rust convertor/kp-100 equivalent grade over reinforcement wherever necessary providing and tying in position 25mmx25mmx12 gauge dia wire MS welded mesh or smaller size over treated surface ready to receive grouts, curing for 10 days etc,loose spalt concrete portions by chipping, removal of dust over treated surface and applying 5mm to 10mm thick plastering in CM 1:4 to match existing surfaces and finished even and smooth including curing for 10 days etc, and removing the debris out side the MOD land in low lying areas and leveling complete all as specified & as directed. |
| 133 | M& L for roof treatment in the following stages :-(a) First Course : M&L for 15 mm thick plaster with CM 1:3 mixed surface even and smooth with water proofing compound as per manufacturer's instructions (Note: - WPC shall be measured and paid separately).(b) Material and labour for UV stable single component fibre reinforced elastomeric liquid applied water proofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106 overlaying of Geofibre mesh over a coat of primer. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in two coats (10-12 hrs gap between each coat). The vital physical and chemical parameters shall be as under. Min elongation at break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be applied with brush or roller, complete in all respect as per the direction of Engr-in charge / consultant. Also, proper surface preparation along with coping at corners is must. Note : - 1.The authorized applicator of manufacturer shall be approved by GE. |
| 134 | Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified & as directed. |
| 135 | M&L 50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, without using extra cement including cutting of joints n.exc 3.0 mtr length complete all as specified and directed. |
| 136 | M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base flooring, path and sub foundation etc complete all as specified and directed. |
| 137 | Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 138 | Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. |
| 139 | M&L for Repair to sunken floor with (i) plastering in CM 1:3, 15 mm thick with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 grade hot bitumen @ 0.7 kg/sqm over a coat of bituminous primer @ 0.5 kg/sqm and then pasting of polythene film, 150 micron, with cold cut back adhessive. (iii) Fixing 50 mm dia GI pipe (medium grade) spout of length 600mm. (iv) Providing PCC lean concrete 1:5:10, type E2 complete all as specified. (v) The process of (i) to (iv) shall only be done after demolition of existing old treatment and removing of existing filling in sunken floor wc/ bath/ kitchen complete all as specified and directed. |
| 140 | Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. |
| 141 | Taking down carefully submain wiring (with DB any type) of any size, make, type and capacity and making good to the disturbed surfaces to match the existing all as specified and directed. |
| 142 | M&L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces as per existing finishes) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, suitable for One light point controlled by one, one way switch, complete all as specified and directed.Note:- The rates of chase cutting on wall done concealed conduit & making good good the distrubed surfaces as per existing finishes and steel terminal boxes are included in the unit rates |
| 143 | All as per Sr. item No.142 here-in-above, One fan/Exhaust fan point controlled by one way switch |
| 144 | All as per Sr. item No.142 here-in-above, but suitable for One socket outlet 3 pin 6 amps on the same board controlled by one no 6 Amp switch. |
| 145 | All as per Sr. item No.142 here-in-above, but suitable for One socket outlet 3 pin, 6 Amps on independent board, controlled by one no 6 Amp switch. |
| 146 | All as per Sr. item No.142 here-in-above, but One bell point controlled by one bell push. |
| 147 | All as per Sr. item No.142 here-in-above, but One light point controlled by two, two way switches |
| 148 | All as per Sr. item No.142 here-in-above, but with using 2.5 Sq mm single core multistranded copper conductor cable for 3 pin 16 Amp socket outlet on independent board complete all as specified and directed. |
| 149 | S&F Switch piano flush type, single pole, one way, 6 amps, 230 volts, ISI marked complete all as specified and directed. |
| 150 | S&F Switch piano flush type, single pole, two way, 5/6 amps, 230 volts, complete all as specified and directed. |
| 151 | S&F Bell, ding dong type, AC 230 Volts, single pole complete all as specified and as directed. |
| 152 | S&F Bell push, flush type, 5/6 Amps ISI marked complete all as specified and as directed. |
| 153 | S&F Switch piano flush type, single pole, one way, 16 amps, 230 volts, ISI marked complete all as specified and directed. |
| 154 | S&F socket outlet, 3 pin, 6 Amp flush type ISI marked complete all as specified and as directed. |
| 155 | S&F socket outlet 2 in 1, 6 pin, 6 and 16 Amp flush type, 230 Volts, ISI marked complete all as specified and as directed. |
| 156 | S&F Ceiling rose, 3 terminal, PVC polycarbonate, isolated body, 230 Volts complete all as specified and as directed. |
| 157 | S&F of Lamp holder, PVC polycarbonate type with back plate suitable for batten fitting complete all as specified and directed. |
| 158 | S&F LED lamp 9W complete all as specified and directed by the Engineer-in-Charge. |
| 159 | S&F modular socket type (2 module) electronic fan regulator flush type ISI marked complete all as specified and as directed. |
| 160 | Taking down and refixing / Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan after Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. |
| 161 | S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete incl dismentaling of unservceable DB all as specified and directed by Engr-in-charge. |
| 162 | S&F replacement sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for a MCB One TPN 63 Amps as incoming and 4 Nos of SPN 63 Amps Out going complete all as specified and directed by Engr-in-charge.Note: MCB/RCCB TPN/SPN/SP measured and paid saperately. |
| 163 | Supply and Fix MCB Single pole\\"C\\" series 5-32 Amps ISI marked. |
| 164 | Supply and Fix MCB Single pole & neutral \\"C\\" series 63 Amps ISI marked. |
| 165 | Supply and fixing MCB TPN C Cuve 63 Amps |
| 166 | Supply and fixing LED lights fiting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 167 | S&F LED light fitting 1x9W / 1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 168 | S&F LED light fitting 1 x 10 watt (2 Feet), decorative ultra slim type, with intergal driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed. |
| 169 | S&F LED street light fitting 36 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete including 1.6 mtr long 40mm bore light grade Gl pipe mounting bracket made to shape with and including MS clamp F1 40mm x 6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified. |
| 170 | S&F decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9W LED lamp B22 base complete all as specified and directed. |
| 171 | M&L for sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable(FRLS) passing through in and including PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire.Note :- Two runs of cable 6 Sqmm (FRLS) and One run of 6 Sqmm copper conductor(FRLS) along with conduit shall be measured as one unit length including taking down old UNSV submain wiring complete all as directed |
| 172 | Taking down carefully electric meter any type and capacity and depositing in MES store yard and refixing in same position, complete all as specified and as directed. |
| 173 | S&F of Heavy duty Exhaust fan 300 mm sweep, 900 RPM, including louvers with cutting chases on brick wall and grounting with nut bolts, complete all as specified and as directed. |
| 174 | Supply,testing and installation of Electric water storage geyser of capacity 25 Ltrs, BEE 5 star rating, 230Volts, AC, 50Hz, comprising of heating element 2000 watt, storage type steel body with copper tank, puff insulation,both power indicating LED lamp and heating indicating LED lamp neccasry suitable 3 core copper cable,suitable plug top, inlcluding supply and fixing of inlet and out let connection to geyser with steel grip,chromium plated PVC connection of 862mm in length - 02 Nos (one for inlet GI pipe and other one for outlet connection) suitable to connect inlet GI pipe 15mm dia and out let GI pipe 15mm dia (out let PVC connection should be capable to withstand the designed temparature of Geyser) and geyser shall be fixed on wall surface with wall mount bracket and 10 cm anchor bolts as required inclduing all necessary plumbling works and civil works complete all as directed and as specified. |
| 175 | M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991)incl dismantling of existing unserviceable earth pit all as specified and directed by Engr-in-Charge. |
| 176 | Supply, laying and testing in trenches/on wall / in duct/ through protection pipe LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area 35 sqmm 3.5 core complete all as diredted by Engr - in - charge Note : Earth work and brick work measured and paid separately |
| 177 | Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in soft/loose soil ext complete all as specified and directed. |
| 178 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soils complete all as specified and directed. |
| 179 | Removal of excavated material soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 180 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 300x180mm x40 mm, complete all as specified and as directed. |
| 181 | Supply and laying sand (tibba sand) for sand cushioning for cable in trenches for cushioning of underground cable and punning for cushioning to cable complete all as specified and directed .Note :- Punned thicknes only shall be measured for the purpose of payment. |
| 182 | S&F of GI tubing of size 40mm bore, medium grade for protection of cables on poles / under road crossing complete all as specified and as directed. |
| 183 | Note : The contract sum shall be arrived at after deducting amount of schedule of \\"Credit\\" from the total quoted amount. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
