Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-04-2026 | Corrigendum No.1 | BOQ | 23-04-2026 |
| Sl. No. | Item Description |
| 1 | BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER, UDHAMPUR Name of Work: ADDN/ALTN TO BLDG NO P-02 PARA 35 OF DWP AT HQ NORTHERN COMMAND UNDER GE (UTILITIES) UDHAMPUR Contract No: CWE/U(U)- 10/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete, all as specified and as directed. |
| 3 | Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed. |
| 4 | Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 5 | Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, complete all as specified and as directed. |
| 6 | Preparing of concrete surfaces on slabs, chajjs by Chipping away loose, spalled, or carbonated concrete until sound concrete is reached, expose corroded reinforcement fully; remove rust using a wire brush or mechanical means.Clean the substrate with a high-pressure water jet to remove dust and oil. Apply a rust remover followed by an anti-corrosive primer (Dr. Fixit Epoxy Zinc Primer). Install watertight, rigid shuttering to prevent leakage and ensure the desired profile. Laying micro concrete up to the required thickness on the designated area with proper shear connector and bonding agenet while the surface is \\"SSD\\" (Saturated Surface Dry). The concrete thickness varies from 15mm to 35mm.complete all as specified and as directed. Make:- Dr. Fixit 208 Micro Concrete/Ultratech microkrete. The concrete thickness varies from 15mm to 35mm. |
| 7 | Plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) as in steps, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, cills, lintels upto 1.50 metre clear span, copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works, all as specified and directed. |
| 8 | 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and smooth mixed with water proofing compound, complete all as specified and as directed. |
| 9 | Supply only Integral water proofing compound complete all as specified and as directed. |
| 10 | M&L for preparation surfaces on walls/ceiling by mechanical scraping, Intense sanding, filling the cracks with smart care crack seal and applying 2 coats of SmartCare Damp Proof paint over a coat of self priming coat. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 12 | Treatment of soil under existing floors using Chloropyriphos emulsifiable concentrate conforming to IS-8944 or emulsion of chemical specified in the MES Schedule except Aldrin purchased directly from the manufacturer or his authorised agents @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and as directed. Note: Anti termite treatment shall be got done through an approved specialized agency which is a member of India Pest Control Association holding valid licence for execution of ATT work as per clause 13 of Insecticides Act 1968. Persons employed to do the anti termite treatment be qualified as per rule 10 of the rules framed under the insecticides Rule 1971. The specialist agency shall be as approved by the GE. |
| 13 | Glazed Vitrified tiles light Shade 7-8mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exc 1.00 Sqm, in floors, walls etc. laid over 8-10 mm thick polymer modified tile adhesive complying to Type 2 as per IS 15477:2019 with Joints of tiles made with spacer of 3 to 5mm shall be grouted with solid epoxy grout TileFixoStyle of Ultratech/SP-100 Duo of Myk Laticate/Gresbond KE-100 of Kajaria of desired shade. |
| 14 | 7-8mm thick Non skid maxgrip vitrified tiles, coloured, (square/rectangular) area of tiles exceeding 0.18 sqm but not exceeding 0.36 sqm of first quality, of shade as decided by GE, shall be laid over 8-10 mm thick polymer modified tile adhesive complying to Type 2 as per IS 15477:2019 with Joints of tiles made with spacer of 3 to 5mm shall be grouted with solid epoxy grout TileFixoStyle of Ultratech/SP-100 Duo of Myk Laticate/Gresbond KE-100 of Kajaria of desired shade. |
| 15 | Glazed ceramic tiles (Digital/HD polished) as in skirting /dado conforming to IS-13712 of 1993 of size 300x600mm, or as directed by GE, thickness not less than 6 to 7mm, of grade B-IIa, laid over and including 6-8 mm thick polymer modified tile adhesive complying with Type 2 as per IS 15477: 2010 and with Joints of tiles made with spacer of 3 to 5mm shall be grouted with solid epoxy grout TileFixoStyle of Ultratech/SP-100 Duo of Myk Laticate/Gresbond KE-100 of Kajaria of desired shade matching with the floor complete all as directed. |
| 16 | 20mm thick Granite, single piece, (of any type) work (table rubbed and polished and moulding of outer edges) in steps, jambs and pillars, window cills, cooking platforms and the like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed. |
| 17 | 25 mm thick, cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in floor finishes, finshed even and fair without using extra cement complete all as specified and as directed. |
| 18 | Demoliton wall and ceiling boards (fibre pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and as directed.. |
| 19 | Supply and fixing wall panelling of Premium UniAcoustic 12mm Uni-vicstrip in size: 600mm*2400mm and fixing as per manufacturer`s instructions. Shade as per direction of GE complete all as directed. |
| 20 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as directed by the Engr-in-Charge. |
| 21 | Decor Slim Stone, natural Stone Veneer (Slate/Quartzite) with Metallic Pigments, Glass Fiber Reinforced Polyester (GRP), water proof and fire resistant minimum thickness 1.5mm to 3mm , Textured/Grit finish with reflective metallic shine, fixed with Kerakoll super flex eco silicon adhesive and backing with minimum 10 mm thick heavy duty Fibre Cement (made with Hatchek process/HPSC technology) complete all as specified and directed |
| 22 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm(both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber fleece. |
| 23 | 10-12mm thick gypsum boards seemless false as in ceiling including sunk or raised moulding orcop design as approved, moisture resistant, including intermediate, perimeter channel wall channel, along with nuts and bolts connecting plates for gypsum boards, dry wall screws soffits cleats, ceiling section, rowel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface, complete all as specified and as directed.Note : (a) Design of ceiling board as approved by Engr-in-Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer |
| 24 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt. ) , all as specified and directed. |
| 25 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each,not exceeding 4.0 square metre each,and removing from site including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 26 | Providing and fixing factory made uPVC colored Sliding window of area not exceeding 2 sqm, Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock. |
| 27 | Supply and fixing factory made uPVC coloured fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per direction of Engineer-in-Charge. |
| 28 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer andas per directions of Engineer-in-charge. |
| 29 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned woodinside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 30 | S & F 5mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and as directed. |
| 31 | 5mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 32 | 1st class hardwood (teak/sal) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned atjoints, supplied and fixed complete all as specified and directed. |
| 33 | Rolled mild steel work as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to grade Fe 290 (E-165) complete all as specified. |
| 34 | Preparing surfaces of wood and wood based materials, steel & iron work, new or old of any description and girth, not otherwise described, and treated with tar or coal tar black paint, complete all as specified & directed. |
| 35 | French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat ofwood filler on new works with two or more coatscomplete all as specified & directed. |
| 36 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specification & drawing as per specification & drawing, complete all as specified and as directed. |
| 37 | 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed. |
| 38 | 1.5 mm thick decorative laminate type -1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions all as specified and directed. |
| 39 | 100 butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed. |
| 40 | 150 mm length stainless steel polished bright Extruded brass handles, fabricated type polished, complete all as specified and as directed. |
| 41 | 150mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and directed. |
| 42 | S&F 3D adjustable concealed hinges of premium quality to hold weight 50-80 Kg as approved by Engr in Charge complete all as specified and as directed. |
| 43 | S&F recessed/integated handle (flush handle or groove handle) of premium quality as approved by Engr in Charge complete all as specified and as directed. |
| 44 | S&F 18 inch SS, Titanium Gold Round Barn Door Handles Heavy Duty complete all as specified and as directed. |
| 45 | S&F conealed door closure of premium quality as approved by Engr in Charge complete all as specified and as directed. |
| 46 | S&F acoustic and fire seal to reduce noise as approved by Engr in Charge complete all as specified and as directed. |
| 47 | S&F magnetic lock & controller of premium quality as approved by Engr in Charge complete all as specified and as directed. |
| 48 | S&F brass 4 lever mortice lock, vertical type, size 100 mm complete all as specified and as directed. |
| 49 | S&F Venetian blinds of approved make, Horizontal or vertical or type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, rolling arrangement/roller, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed. |
| 50 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 51 | 5mm thick rendering on brick or concrete surfaces as in ceiling in cement mortar 1:3, and finish the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 52 | Viterous china wash basin, oval counter top self rimming basin of size 560 x 410mm incl waste couping CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 450mm dia & CP grating with holes, fixed in repairs complete, all as specified and as directed. |
| 53 | S&F Floor-mounted or wall-mounted vanity assembly including a wash basin, cabinet, and framed mirror. |
| 54 | S&F 5 mm thick looking mirror of required size, fixed on walls with dash fasteners and chromium plated screws purposefully made to fix the glass by drilling hole in the glass complete all as directed. |
| 55 | Vitreous china squatling pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVC (SWR) 'P' trap, provn of lime concrete and jointing to flush pipe (fixed in repairs), complete all as specified. |
| 56 | S & F 15 mm dia WHB mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed. |
| 57 | S&F 15 mm bore CP Bib tap complete all as specified and directed. |
| 58 | Stop valves/Angle valve, fancy type chromium plated cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore 15mm, fixed in repairs, complete all as specified and as directed. |
| 59 | Vitreous China urinals, half stall (back or corner wall type) white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), fixed in repairs, complete all as specified and directed. |
| 60 | S & F Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed complete all as specified and directed. |
| 61 | Urinal spreader of PTMT any colour for fixing with 15mm bore pipe (Min weight 60gms), fixed in repairs, complete all as specified and as directed. |
| 62 | Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe, fixed in repairs, complete all as specified and as directed. |
| 63 | Toilet paper holder, fixed in repairs, complete all as specified and as directed. |
| 64 | S&F in repair 600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and directed. |
| 65 | S&F in repair Soap dish in repair complete all as specified and directed. |
| 66 | S & F Overhead rain shower square, with Shower Arm 180mm with wall flange. complete all as specified and directed by Engineer-in-Charge (Flow of the fixture must be 3.0 litre per minute or less) |
| 67 | S & F Wall mixer with bend pipe for overhead shower. brand complete all as specified and directed. (Flow of the fixture must be 3.0 litre per minute or less) |
| 68 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 69 | PVC (SWR) floor trap 75mm size, plain with grating including jointing with solvent cement fixing in repair, complete all as specified and as directed |
| 70 | PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed. |
| 71 | 15mm bore galvanised steel water tubing medium grade (ISI Marked) with and including all fittings and fixed complete to walls and ceiling or laid under floors etc. complete all as specified and as directed. |
| 72 | 20mm bore galvanised steel water tubing medium grade (ISI Marked) with and including all fittings and fixed complete to walls and ceiling or laid under floors etc. complete all as specified and as directed. |
| 73 | Rotational moulded polyethylene water storage tank , three layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm (Minimum weight 210 gram) etc), incl dismantling existing water tanks, complete all as specified and as directed. |
| 74 | Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm, fixed in repair complete all as specified and as directed. |
| 75 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth in any type of soil and getting out, complete all as specified and as directed.. |
| 76 | Plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete, complete all as specified and as directed. |
| 77 | Providing, cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in coping, benching and the like incl form work complete all as specified and as directed. |
| 78 | Plain cement concrete 1:2:4 type B-2 (using 14mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and as directed. |
| 79 | TMT mild steel bars,6 to 8 mm dia, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and as directed. |
| 80 | TMT mild steel bars, 6mm to 8mm dia, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and as directed. |
| 81 | Pre-cast RCC cement concrete 1:2:4 type B-1 (20mm graded) as in manhole cover slab and in similar works bedded and jointed in cement morter 1:6, complete all as specified and as directed |
| 82 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. |
| 83 | Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil,complete all as specified and as directed |
| 84 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed. |
| 85 | Mild steel Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails guides for sliding doors, and vertical posts of pipes sections fixed with angle cleats or other connecting plates, Fe-410-W (Gde - E -250), complete all as specified and as directed |
| 86 | S & F SFRC Manhole cover 600 x 600 complete as specified and directed. |
| 87 | 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, fixed in repairs, complete all as specified and as directed. |
| 88 | 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, fixed in repairs, complete all as specified and as directed. |
| 89 | 110 mm bore PVC SWR bends any radius with acess door and fixed solvent etc complete all specified and as directed. |
| 90 | 75 mm bore PVC SWR bends any radius with acess door and fixed solvent etc complete all specified and as directed. |
| 91 | PVC (SWR) 110 mm bore dia junction single, (Single T) equal or unequal provided with access door complete all as specified and directed. |
| 92 | S&F PVC (SWR) Floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement and making good all as directed |
| 93 | Reinforced concrete pipes150mm bore ,class NP2, laid and jointed complete with coller all as specified and as directed. |
| 94 | Plain cement concrete bed to drain pipes in cement concrete 1:3:6 type C-2 of 150mm bore including packing under, and hunching against the sides of pipes after are laid and tested complete all as specified & directed. Note:- (i) Thickness of bed below barrel of pipe-10Cms. (ii) width of bed-outer dia of pipe plus 30 cms. |
| 95 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, for 150mm/200mm internal diameter of pipe complete all as specified and as directed. |
| 96 | Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 97 | Preparation of old steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 98 | Preparation of new and old surfaces on wall and applying 1mm thick coat of wall putty (JK/Birla) to make the surface smooth and even complete all as specified and directed. |
| 99 | Two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, complete all as specified and as directed. |
| 100 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified & directed. |
| 101 | Supply and fixing heavy duty Stainless Steel Slot Drains Channel for 125mm width complete all as specified and as directed. |
| 102 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as light fittings, switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surfaces of wall, ceiling, floors etc to match the existing, complete all as specified and as directed. |
| 103 | Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed |
| 104 | Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified and directed. |
| 105 | Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed in and including PVC concealed conduit pipe as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall /ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white /colour wash complete all as directed. NOTE: Continuous earth wire of Green colour should be provided at each point with 1.5 sqmm FRLSH copper conductor cable of 1100 V grade up to ceiling rose/light fitting etc all as Specified & Directed by Engr- In-Charge. |
| 106 | All as per items No 104 above but cable 2.5 Sqm FRLSH for one 3/5 pin 6Amp socket outlete point on an independent board. |
| 107 | All as per items No 104 above but cable 2.5 Sqm FRLSH for one 3/5 pin 6Amp socket outlete point on the same board with other switch. |
| 108 | All as per items No 104 above but one ball/buzzer point controlled by one ball push single pole one way.. |
| 109 | All as per items No 104 above but for one 3/6 pin 16 Amps socket outlete point on an independent board with cables of size 2.50 sqm. |
| 110 | All as per items No 104 above but an independent board with cables of size 4.0 sqm. |
| 111 | S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed. |
| 112 | S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed. |
| 113 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed. |
| 114 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed. |
| 115 | Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as specified and as directed. |
| 116 | S&F in replacement electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed. |
| 117 | S&F in replacement telephone socket double suitable for RJ-11 fixed with modular box along with frame complete all as specified and directed.Note:- Modular box, Modular plate cover is included in the quoted rate. |
| 118 | S&F in replacement TV Co- axial socket complete all as specified and directed. |
| 119 | S&F in replacement Sheet metal enclosure double door type for MCCB VTPN DB upto 8 way vertical type 415 volts with suitable busbar and neutral link,chases wall for fixing DB and making good distributed wall surfaces to match with existing specification for provn of 160 amps Amp 4 Pole MCCB complete all as specified and directed. |
| 120 | S&F in replacement Sheet metal enclosure double door type for MCCB VTPN DB upto 4 way vertical type 415 volts with suitable busbar and neutral link,chases wall for fixing DB and making good distributed wall surfaces to match with existing specification for provn of 160 amps Amp 4 Pole MCCB complete all as specified and directed. |
| 121 | S&F in replacement Sheet metal enclosure double door type for DBs Single pole & neutral 4 way 415 volts with 160 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 122 | MCCB 160 Amps, 4 pole 25KA , 415 Volt with fixed magnetic and fixed thermal setting complete all as specified and directed. |
| 123 | MCCB 125Amps, 4 pole 25KA , 415 Volt with fixed magnetic and fixed thermal setting complete all as specified and directed. |
| 124 | Sheet metal enclosures for distribution board when MCB to be used SPN 12 way with IP-43, IK-09 protection 240V with 200 Amps rated bus bar, double door type including cutting chases in walls for fixing DBs making good the distubed surfaces to match with existing specifications ,fixing in repairs complete all as specified and as directed.(Note: MCBs will be measurd separately). |
| 125 | S & F in replacement MCB Single pole and neutral 240 volt any rating 40amps\\"C\\" series, with rupturing capacity 10 KA complete all as specified and directed. |
| 126 | S & F in replacement MCB single pole 240 volt any rating from 6 to 32 amps \\"C\\" series, with rupturing capacity 10 KA ,complete all as specified and directed. |
| 127 | S & F in replacement MCB TPN 240 volt any rating 100 Amps \\"C\\" series, with rupturing capacity 10 KA ,complete all as specified and directed |
| 128 | S & F in replacement MCB TP 240 volt any rating 100 Amps \\"C\\" series, with rupturing capacity 10 KA ,complete all as specified and directed. |
| 129 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with all accessories as specified below :- Rated Wattage: 36 Watts SizeSize: 600mm x 600mmInput Voltage: 220–240 Volts AC, 50 HzType: Edge-lit / Back-lit LED panel, slim designLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current LED driver, BIS approvedBody: Powder coated CRCA sheet / Aluminium housing Diffuser: High transmission opal acrylic / polycarbonate diffuserProtection: IP20 or betterLife Span: Minimum 50,000 burning hoursWarranty: Minimum 2 yearsNote:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 130 | Supply, installation, testing and commissioning of 10 Watt LED bulkhead light fitting, suitable for wall/ceiling mounting complete with all accessories as specified below :Rated Wattage: 10 WattsType: LED bulkhead, round/oval shape Input Voltage: 220–240 Volts AC, 50 Hz Luminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current electronic LED driver, BIS approvedBody: High grade polycarbonate / die-cast aluminium housingDiffuser: Opal / frosted polycarbonate diffuserProtection: IP54 or better (suitable for damp areas)Mounting: Surface wall/ceiling mountingLife Span: Minimum 30,000–50,000 burning hoursWarranty: Minimum 2 years |
| 131 | S& F in replacement LED tube light fittings of 20 wattage including rawl/plug ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed.Rated Wattage: 20 WattsType: Integrated LED Tube Light fitting (4 feet)Input Voltage: 220–240 Volts AC, 50 HzLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current electronic driver, BIS approvedHousing: Aluminium extruded body with opal diffuserMounting: Surface / Batten typeProtection: IP20 or betterLife Span: Minimum 50,000 burning hoursWarranty: Minimum 2 yearsNote:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 132 | Supply and fixing LED luminaire 10 watt, 220 V AC recess/surface mounted downlighter type with high efficiency PC diffuser soft light and symmentrical illumination complete with driver, holders & LED lamp warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 133 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed |
| 134 | S&F of decorative wall mounting 1X9W fixture with frosted glass along with 9W warm white bulb GLS lamp luminaire complete all as specified and directed. |
| 135 | Supply, installation, testing and commissioning of 200mm sweep exhaust fan, BLDC motor operated, suitable for wall mounting in toilet, complete with all accessories as specified below:Sweep Size:200 mm ,Motor Type: BLDC motor, Power Consumption: Approx 6–8 WattsSpeed: Approx 2000 RPM Input Supply: 220–240 Volts AC, 50 HzNoise Level: Low noise type Body: High grade ABS / Polycarbonate body, glossy finishBlades: Aerodynamically designed plastic bladesMounting: Suitable for wall mounting with round cut-out approx. 200-220mmSafety: Inbuilt thermal overload protectionProtection: IPX4 Warranty: Minimum 2 years Including cutting of wall, making good damages, fixing with screws, connection with existing wiring, providing PVC flexible pipe if required, testing and commissioning complete in all respects all as specified and direceted by Engr-in-charge. |
| 136 | Supply, installation, testing and commissioning of ceiling mounted PIR dual tech 360 digree sensor occupancy sensor, suitable for corridor ,hallway ,stairecases for controlling LED light fittings, complete as specified below...Type: Ceiling recessed / surface mounted PIR sensorOperating Voltage: 220–240V AC, 50 HzLoad Capacity: Min 1000 Watts (LED compatible)Detection Range:8-12 metresDetection Angle: 360° Time Delay: Adjustable (30 sec to 5 min or more)Lux Control: Adjustable daylight sensitivityMounting: Recess / surface type as specifiedProtection: IP41 or betterWarranty: Minimum 2 yearsNotes:-Quoted rates shall be Including connection, setting, testing and commissioning complete in all respects all as specified and directed by Engr-In-Charge. |
| 137 | Sub main wiring with copper conductor cable (2 runs of cable) multistranded 2.5 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC rigid concealled conduit not less than 25 mm dia and 2 mm wall thickness ISI marked medium grade , with all conduit accessories for round ceiling light/round ceiling light recessed type/ foot lamp/focus light/ 2x2 panel light such that GI shadle, GI screw, rowl plug etc. including cutting chasing and 1x2.5 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire, including taking down old sub main wire, complete all as specified and directed.Note:- 2 runs of 2.5 Sqmm (2x2.5sqmm ) ,one run of 2.5 Sqmm (1x2.5 sqmm ) cable and one metre of conduit will be measured as one unit. |
| 138 | All as per itme No. 136 above but 2x4 Sqmm and 1 x 2.5 Sqmm for Earth wire. |
| 139 | All as per itme No. 136 above but 2x6 Sqmm and 1 x4 Sqmm for Earth wire. |
| 140 | All as per itme No. 136 above but 4x16 Sqmm and 2 x 10 Sqmm for Earth wire. |
| 141 | Supplying, installing, testing and commissioning of 1200 mm sweep, 230V, 50Hz, IoT enabled BLDC ceiling fan complete , power consumption not exceeding 35W at full speed, minimum , 5-star rated as per Bureau of Energy Efficiency, including down rod, canopy, shackle, mounting accessories, connection with existing wiring, testing and commissioning complete as required Power factor >0.95 downrod type suitable for ceiling installation ,Speed min 300 RPM complete all as specified and Directed by Engr-In-Charge. Note- (i) Warranty 3 years overall on fan & 5 years on BLDC Motors (ii) Rates shall includes all leads & mounting hardware testing,commisioning integration with existing Wifi |
| 142 | \\"Supply, installation, testing and commissioning of water Storage Type Electric Water Heater (Geyser) 10 Litre capacity, suitable for bathroom use, complete with all accessories as specified below:Capacity: 10 LitresType: Instantaneous / Mini storage typePower Rating: 2 kW (approx.) Input Supply: 230 Volts AC, 50 Hz, Single PhaseHeating Element: Heavy duty copper / glass coated heating elementTank: Pressure type inner tank with anti-corrosion coatingBody: ABS / Rust proof outer body Working Pressure: min 6–8 barSafety Features:Inbuilt thermostat,Thermal cut-out,Multi-function safety valve,Pressure relief valve,IP Protection: IPX4 or better,Mounting: Wall mounted type,Warranty: Minimum 2 years on product and on tankNote:- Quoted rate Includes providing and fixing necessary inlet and outlet connections PVC Pipes , CP brass nipples, connection to existing water supply line, connection to electrical point, testing and commissioning complete all as specified and directed |
| 143 | Supplying and install Heavy Duty cable tray (SRFL100G) ,hot-dip galvanised mild steel , with size 100MMX50MM and 0.9mm thick ness. , complete with bends, tees, reducers, cross members, couplers, and all necessary accessories.The tray shall be hot dip galvanized after fabrication with zinc coating not less than 120 microns (or as specified), fixed on walls/ceiling with M.S. angle iron supports, threaded rods, clamps, anchor fasteners, including painting of supports with one coat of red oxide primer and two coats of synthetic enamel paint of approved shade complete all as specified and directed. Note :- (a) Drilling, cutting and welding as required Fixing with dash fasteners / anchor bolts Earthing of cable tray with 25x3 mm GI strip along with cable tray is included in the quoted rate of the items. (b) Cost is included for L supports for wall with all accessories such as nut ,bolt ,washers etc.(c) All major and minor spares are required in laying of cables and fixing of cable trays which are not mention above are included in the quoted rates.(d) All meterial such as cement ,concerete,tiles etc to make wall/roof /ground in its original shape after fixing of cable trays shall include in the quoted rates of the items. |
| 144 | GI tubing light grade 40mm bore along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles complete all as specified and as directed. |
| 145 | Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to and including 4mm dia galvanized iron wire lead by means of bolts, nuts, check nuts and washers of galvanized standard iron or steel all as specified or indicated in electrical plate No 3 of MES Part-I, including testing on completion including the material and labour and taking out old unserviceable earthing of the following :-(a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm.(d) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified. |
| 146 | Srl item No 144 Contd …(e) 15 mm nominal bore light grade GI protection pipe 7.5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal.(g) Testing of earthing.Note : On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge. |
| 147 | M & L for providing earthing with GI earth plate electrode 600 X 600 X 6mm buried directly in ground (earth pit not less than 2.25M deep below ground level ) with top edge of the earth plate not less than 1.5M below ground level connected to GI strip 32 x 6mm thick for earthing lead fixed by means of nuts,bolt,washers etc connected to earth test point complete all as specified in electrical plate NO 3 of SSR 1996 part 1 ,including necessary excavation and earth work in any strata of soil,comman salt, charcoal dust, 40 mm dia light grade GI pipe for protection to earth lead, GI water pipe 20mm dia with funnel &wire mesh , PCC pit with CI cover and frame etc all as specified and directed. Note:- All the joints shall be made with welding to get proper conductivity. |
| 148 | Note itenm no-145 to 147:-Contractor Shall provide earth pit chamber board of 3.15mm thick mild steel sheet of size 45cmX30cm fixed with12mm thick MS rod two nos up to 90 cm height by nuts/bolts including spray painting with two coats of synthetic enamel black paint complete MS sheet both side including writing letters 6cm height i.e Eart pit No, Location, Earthing test Value and date complete all as directed. |
| 149 | GI strip 32 x 6mm buried in ground alongwith saddle and fixing screws etc. for roof conductors and down conductors above ground complete all as specifed and directed. |
| 150 | Supply, installation, testing and commissioning of 150mm sweep inline duct exhaust fan, BLDC motor operated, suitable for wall mounting ,complete with all accessories as specified below:-Sweep Size:150 mm ,Motor Type: BLDC motor, Power Consumption : Approx 70 WattsSpeed: Approx 5400 RPM Input Supply: 220–240 Volts AC, 50 Hz,Noise Level: Low noise type Body: High grade ABS / Polycarbonate body, glossy finish,Blades: Aerodynamically designed plastic blades,Mounting: Suitable for wall mounting with round cut-out approx. 150 mm,Safety: Inbuilt thermal overload protectio,Protection: IPX4 Warranty: Minimum 2 years including required, testing and commissioning complete in all respects all as specified and direceted by Engr-in-charge. |
| 151 | Material and labour for supply and fix rigid non-metallic PVC conduit 25 MM bore exclusive of boxes (junction/terminal) but inclusiveof all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, locknuts complete all as specified and directed. |
| 152 | Supply, install, commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS CRC 18 gauge square rforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening of size 70'' x 78'' as complete all as specified and as directed. |
| 153 | Supply, install, 2 way LED wall surface mounted light fitting 15W warm white colour complete all as specified and directed. |
| 154 | Supply and fix LED Flaxi strip Neon AC LED warm white Colour Strip Light with PVC outer cover ,IP 65 input voltage 220-240 VAC input frequency 50 Hzs power factor ss protection -IP -65 working temp range -20 degree celcius to + 45 degree celcius working humidity range 10-90 RH and complete all as specified & directed by Engr-in-Charge. |
| 155 | Bell push, flush type 6 Amps 240 volts complete all as specified and as directed. |
| 156 | Bell (ding dong type), AC electronic type, 230 volts, single pole, 50 Hz complete all as specified and as directed. |
| 157 | Material and labour for taking out Grill and diffuser of any size form the ceiling and refixing the same with two coat of synthetic enamel paint and making good to disturbed surfaces complete all as directed at site. |
| 158 | Bell (ding dong type), AC electronic type, 230 volts, single pole, 50 Hz complete all as specified and as directed. |
| 159 | Notes:- The subject work shall be carried out in time bound manner being urgent work. The contractor shall make his own arrangement to complete the work within the completion date as given by GE in WO No.1 no extension shall be granted under the subject work. The contractor are advised to visit the site of work and quote their rates accordingly. No claim whatsoever on the this account shall be entertained at later stage Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
