|
| 1 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (a) Size 600x600 mm |
| 2 | Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower boltsand finished, fixed in position including the cost of cement concrete1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. (c) Doors and windows frame of size 151mmx60mm with 35 mm wide double rebate weighing 3.95kg per meter. |
| 3 | Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower boltsand finished, fixed in position including the cost of cement concrete1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. (b) Doors and windows frame of size 113mmx60mm with 35 mm wide single rebate. |
| 4 | Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge(1.25mmthicksteel sheet of the specified section, including iron lugs(holdfast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete (e) Cupboard frame of size 75mmx45mm with 25mm wide single rebate |
| 5 | Factory manufactured Solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified abovebut including labour for fixing the same in position (Code : IS 2202-1 (1999) (c) Decorative with teak facing on both sides edges lipped with teak with laminated core (iv) 35mm thick |
| 6 | Wire Gauge Red meranti wood Normal (15 to 16 kg per cft. Approx.) door shutter without springs housed in chowkats. (A) 35 mm thick |
| 7 | Redmeranti Normal Super (18 to19kg per cft. Approx.) doors shutter windows shutter includinghinges,screwandcords etc. Complete fixed in position. (a) Panelled, glazed or glazed and panelled. (ii) 35mm thick |
| 8 | fixed in position. (a) Panelled, glazed or glazed and panelled. (ii) 35mm thick10 mm thick Cement plaster |
| 9 | Dismentling CC (i) Cement concrete plain 1:4:8 or 1:5:10 |
| 10 | Cement concrete 1:2:4 (a) mixing by mechanical means using concrete mixer volumetric type with stone ballast 20mm gauge With stone ballast or shing |
| 11 | Precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joint sand over the base for floors, treads of steps and landings |
| 12 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 13 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/ Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 14 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading. |
| 15 | Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. (a) 15mm i/dia. |
| 16 | Dismantling Sanitary fixtures such as European/ Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.(a) European/Indian/Orissa W.C. |
| 17 | (b) PVC / China Ware Cistern |
| 18 | (c) Wash Hand Basin / Urinal Pot |
| 19 | (d) CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap |
| 20 | (e) Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 21 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class including cost of specials (such as tees, bends, sockets, elbows etc.), painting with anti-corrosive bitumastic paint, testing, cutting, threading Inside building complete. (a) 15mm i/dia. |
| 22 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. (a) 15mm i/d G.I. Union |
| 23 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. (a) With 100mm x 75mm i/d Floor Trap (weighing 4.0 Kg) |
| 24 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (iii) Size 630 mm x 450 mm x 830 mm |
| 25 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 26 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. b. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 27 | Providing & fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. B. C.P. brass 15mm Concealed stop cock with flange. |
| 28 | Providing & fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. C. C.P. brass 15mm Angle valve without flange |
| 29 | Providing & fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect. (a) (i) C.P. brass Bib cock long nose/ long body foam flow without flange |
| 30 | Providing and fixing in position C.P. brass overhead shower arm chrome round or square with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 31 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 32 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. (a) With C.P. Brass nut |
| 33 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 34 | Scraping of Cement plaster |
| 35 | Dismantling brick work tile, masonry or tile lining (b) In cement |
| 36 | Dismantling concrete Reinforced cement concrete |
| 37 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working pressure 4 kgf/cm2) conforming to IS : 4985,including fixing with MS clamps (i) U-PVC pipes(working pressure 4 kgf/cm2) 110 mm dia. |
| 38 | Providing and fixing110mm dia.U.P.V.C bend for Rainwater pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. a UPVC 110 mm bend |
| 39 | Dismantling stone masonry/ Rubble masonry including stacking of serviceable material sand disposal of unserviceable materials. (b) In cement |
| 40 | Boulder masonry in cement mortar (1:6) in foundations and plinth. |
| 41 | 1.8meter high G.I. barbed wire fencing with 2.4 meter angle iron posts 50x50x6mm placed every 3 meters centre to centre 0.6meter below ground level, every 15th post, end post, corner post suitably struttedand provided with 12 horizontal lines and two diagonals inter woven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size 0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications. |
| 42 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete. (b) I.S.I Designation No. II (size of door 701mm to 850mm) |
| 43 | Providing and fixing commercial plywood 12mm thick |
| 44 | Providing and fixing plywood, plain lining, butt jointed including PVC Plug placed at 45 cm to 65 cm centers complete with necessary nails (a) 4mm thick 3 ply decorative ply wood with teak faced on one side |
| 45 | Providing & fixing 9\\" stainless steel handles ISI marked on door &window framescomplete inall respectasper the directions of Engineer-in-charge. |
| 46 | Providing & fixing 6\\" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. |
| 47 | Providing & fixing 12\\" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. |
| 48 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : B 250mm x 16mm |
| 49 | Providing and fixing bright finished brass 100mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete |
| 50 | Red meranti Normal (15 to16 kg per cft. Approx.) cupboard shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts haspwith staple but including the labour for fixing them) (b) 25 mm thick |
| 51 | Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering including cost of neat coat of cement, disposal of rubbish to the dumping ground within 50 m lead |
| 52 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt) (i) For shutter area |
| 53 | Removing doors and windows. (i) Doors |
| 54 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled (a) Doors of area 3 sqm and below. |
| 55 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled (b) Windows of area 3sqm and below |
| 56 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (b) Glazing area above 0.09 sqm (ii) 4mm thick or 10.78Kg/ sqm |
| 57 | First class burnt brickwork laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. |
| 58 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. (i) Triple Layer Tanks |
| 59 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. (b) G.I. tank nipple 20mm i/d |
| 60 | Providing and fixing in position automatic brass Ball Cock in tanks. A Plastic Ball Cock with rod and Plastic Ball. (ii) 20mm i/d |
| 61 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps,dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 62 | Labour for fixing door at site complete in all respects |
| 63 | Renewing glass panes with putty and nails wherever necessary a) Glass Panes weighing 8.44 Kg/sqm |
| 64 | Cleaning of glass panes both sides |
| 65 | Cement concrete 1:4:8. With stone aggregate 40mm gauge. mixing by mechanical means using concrete mixer volumetric type |
| 66 | Distempering with acrylic washable oil-bound distemper (of approved manufacture), two or more coats over one priming coat to give an even shade. |
| 67 | Finishing walls with exterior decorative cement based such as snowecem, robbiacem etc. on old work one coat to give an even shade |
| 68 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @1.67 litre /10 sqm over and including base coat of waterproofing cement paint applied @2.20 kg/10 sqm |
| 69 | Painting two or more coats, excluding priming coat, with synthetic enamel paint in all shades on woodwork, metallic, or plastered concrete surface to give an even shade. |
| 70 | Preparation of plastered or concrete surface for painting (including sandpapering the surface) using ready-mixed cement-based wall putty by applying two or more coats to get the required finish. |
| 71 | Lime pointing 2:3 weathered and struck. |
| 72 | Providing & Fixing decorative high pressure laminated sheet 1mm SF thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality |
| 73 | TIMER: (i) S/E of Microprocessor Based Street Light Controller with digital time switch daily programmed with stand by lithium battery with back up of 6 years with min. time between 2 switching operations is 1 minute, three pole power contactors 40A. with coil voltage 220-230V AC with 1 no. aux. contact NO, MCB 2 pole 40amp. (CCurve, 10kA) & power wiring with single core PVC insulated FR cable 10 sq. mm and control wiring with PVC insulated FR cable 1 sq. mm, 1 no. two position selector switch to bypass timer and other accessories & petty material (din rail, 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) should be fixed on bakelite sheet 6mm thick to be mounted in a IP54 surface/ flush mounting powder coated sheet metal (1.60mm thick) cabinet having size 450mm x 600mm x 150mm to switch ‘ON’ all the 3 phases & switch ‘OFF’ 3 phases pre-fixed timings complete in all respect as per satisfaction of Engineer-in-charge:-(b) Street Light Controller (For Single Phase Circuit) with 1 No. Three Pole Power Contactor 40A, 1 No. MCB 2 Pole 40amp. (C-Curve,10kA) & petty material (Din rail, 1 No. 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) |
| 74 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- (i) SP&N Double Door Distribution Board 4 way each |
| 75 | XLPE INSULATED ARMOURED CABLES (UNDERGROUND): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid 1metre below ground level including excavation, sand cushioning, covering with sand & First Class bricks and back filling the trench etc., of the required size as per PWD General Specifications:- (ii) Overall size 10sq.mm (2Core) Armoured (Underground) |
| 76 | PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE: (xii) Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- (e) Overall size 2.5sq.mm (50/0.25mm), 2Core |
| 77 | Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site: (a) SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement |
| 78 | G.I. EARTHING: (xiii) Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling). (a) Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) |
| 79 | Painting of Galvanized iron pipe pole including bracket with two coats of aluminium paint (With brush):- (a) Overall Length 4 Metre |
| 80 | Supply and erection of GARDEN BOLLARD LIGHTS Complete in all Respects as approved and desired by the Engineer-in-charge at site. |
| 81 | Supply and erection of LED Garden POLE Lights Complete in all Respects as approved and desired by the Engineer-in-charge at site. |
| 82 | REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES)- Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring fan point (With fan box) |
| 83 | Wiring light point |
| 84 | Wiring 6Amp. Plug control comprising wall socket point |
| 85 | Wiring 16/20Amp. power plug control point |
| 86 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.5sq.mm (Un-sheathed) |
| 87 | Overall size 2.5sq.mm (Un-sheathed) |
| 88 | Overall size 1 sq.mm (Un-sheathed) |
| 89 | Overall size 4sq.mm (Un-sheathed) |
| 90 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-(ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring light point |
| 91 | Wiring 6Amp. wall socket point |
| 92 | Wiring 6Amp. Plug control comprising wall socket point |
| 93 | SURFACE AIR CONDITIONER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Supply and erection of air conditioner supply terminal point on surface on wall etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2 Module), covered with Frame Plate etc., & including the cost of above material and other petty material with necessary connections etc.:- Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. |
| 94 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 95 | MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 96 | MCB Double Pole 40amp. (10kA, Curve-C) |
| 97 | MCB Double Pole 6-32amp. (10kA, CurveC) |
| 98 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color- coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- SP&N Double Door Distribution Board 8 way each |
| 99 | SWITCH DISCONNECTOR FUSE UNIT (With Sheet Enclosure): Supply and erection of Switch Disconnector Fuse Unit with HRC Fuses (Suitable for DIN HRC Fuses) in sheet enclosure on the existing surface Confirms to IS 13947 (Part-III), IEC 60947-3 complete with G.I. Bolts, Nuts & Connections on both sides of switch with suitable size of thimbles, including cost of DIN HRC fuses as per PWD General Specifications:- SDF TP&N 200Amp., 415volts (With Sheet Enclosure) |
| 100 | SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-Bakelite Batten Holder (Large size) |
| 101 | Ceiling Rose (Flush Piano type) |
| 102 | 6/10Amp. One way modular switch (One module) |
| 103 | Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture more than 120 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Make: Bajaj BCLAB 20W WH LED P / POLYCAB;LTU01005/ Crompton:-LDL-20-CDL |
| 104 | Supply & erection of LED lamp 14watt,Make jaquar code no. LPRM014B22CW or equivalent crompton/orient/wipro,erection and connection and testing of the same with petty material as rtequired at site as desired by Engineer-in-charge at site. |
| 105 | Providing and fixing Central counter for kitchen (steel) at site Complete in all Respects. |
| 106 | Supply of Gas bhathi 2 burner |
| 107 | Supply and fixing of 4 burner gas stove Make: (Sunflame) |
| 108 | Supply and Fixing of Chimney 3'Make: glen, kaff. |
| 109 | Providing and fixing Cattle Catcher (size 8.5’x3’) at site Complete in all Respects. |
| 110 | Providing and fixing MS Gate (size 15’x6.5’) at site Complete in all Respects. |
| 111 | Providing and fixing Portable cabin (20'x10') at site Complete in all Respects. |
| 112 | Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base |
| 113 | Providing & Fixing Blinds/Curtains Providing and fixing of interior blinds zebra with all fittings. |
| 114 | Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and to the entire satisfaction of engineer-in- charge. CSR – 13.65 |
| 115 | Providing & fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) of size 600mmx450mm. |
| 116 | Providing and Fixing of ventilators Frame and Ventilator shutter (double Rebate) both sides of size 2x3 ft including Anti-termite treatment with primer and paint of required colour (One Fix Glass and opening for Exhaust fan) including exhaust fan and design as per Hut No. 1 and directions of Engineer-in-Charge. |
| 117 | Chowkats of Redmeranti Super (18to19 kg per cft. Approx.) confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts,corner straps cleats, stops bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) Double Rebate (60mmx150mm) (60mmx 150mm) |
| 118 | Providing & fixing 8\\" stain less steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. |
| 119 | Providing and fixing bright finished brass 100mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 120 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 121 | Providing & fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 122 | Providing & fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 123 | Providing and fixing Stainless steel health faucet complete in all respect. |
| 124 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) SDR 11 pipes & fittings 25mm o/d as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. SDR11CPVCpipes & fittings 20mm o/d |
| 125 | Providing and fixing in position storage type automatic electric water heater pressure type thermostatically controlled, single phase wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel, Inner glass lining with B-Rating minimum 3 stars complete with 1 Mtr. three core flexible cord with plug, non-return valve and pressure release valve complete including fixing and testing complete in all respect. Horizontal Type with 40 litres capacity. |
| 126 | Providing and fixing divertors of approved make (to the approval of Engineer-in-charge) for bathand shower system complete in all respect. Single lever concealed divert or of bath and shower system (with body and upper part) |
| 127 | Providing and fixing in position premium rangeC.P. BrassFittings andaccessories of approved make (to the approval of Engineer-in-charge ) complete in all respect (iv) C.P. brass toilet roll holder with flap. |
| 128 | Providing and fixing in position CP Brass single lever surgical mixer with swinging spout approved make (to the approval of Engineer in charge) complete in all respect. |
| 129 | Providing and fixing in position premium range C.P. Brass 15mm Concealed stop cock with adjustable wall flange with seal. (Outer + Inner Body) of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 130 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 131 | Providing and fixing of Wall Tiles (1'x 1'-6\\") |
| 132 | Providing and fixing of Granite Black with dismanteling on kitchen shelf and sink . |
| 133 | Supply and fixing of Water Purifier (RO+MF) Make : Microtek/pureit |
| 134 | Plumbing work for Kitchen including dismantelling and refixing complete in all respect with fixing brass long nose kitchen taps. |
| 135 | Providing 1.5 ton all weather air conditioner complete with all fitting ( stabilizer, cooling pipe etc.) rates as per approved estimate WRD/25-26/DO/Div Township/Dams/0032 dated 15 /12/25 |
| 136 | Installation charges AC |
| 137 | Providing and fixing outdoor mount for AC |
| 138 | Supply of double bed with 5 inch mattress. |
| 139 | Providing and fixing aluminum Wire Mesh including cost of necessary fittings i.e. screws,u Type Beading etc. complete |
| 140 | Providingand fixingglazing inaluminum door, window, ventilator shutters and partitions etc. withPVCPlug/ neoprene gasket etc. complete as per the architectural drawings and thedirections ofengineer-in-charge. (Costofaluminum snap beading shall be paid in basic item) Float glass panes of 5 mm thickness |
| 141 | Providing and fixing 12mm thick prelaminated particle board flat pressed threel ayer or graded wood particle board conforming to IS:12823 Gradel Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge.Pre laminated particle boardwith decorative lamination on Both side |
| 142 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 143 | Providing and fixing exhaust fan 12 inch. |
| 144 | Providingand laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.25 mm |
| 145 | Providing and Fixing the Modular kitchen with 19mm thick Ply board for frame and drawers including all modular Fitingslnotac. Profile handle ,edge lape.inside linear mica and front side tinishing with Imm thick high loss mica as per shade approved department. |
| 146 | Providing and fixing outer frame of cupboard with particle board and doors with mica 1 mm. Please Enable Macros to View BoQ information |
