|
| 1 | Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required in all respect and to the best satisfaction of Engineer-in-Charge. |
| 2 | Providing, laying, jointing, testing and commissioning of following sizes of MS 'C' Class (Heavy duty) pipes conforming to IS-1239 with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be of iron unless specified otherwire and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted including synthetic enamel paint of approved shade over a coat of zinc primer.Priorto application of primer the surface should be cleaned dirt,rusts,rough substance etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 3 | 25 mmdia. |
| 4 | 80 mm dia. |
| 5 | 100 mm dia. |
| 6 | Makes:- Jindal/Hisar/Tata/Surya Tube. |
| 7 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) |
| 8 | (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 |
| 9 | b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, (5.5 KW) 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. |
| 10 | (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. |
| 11 | (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 12 | 450 LPM |
| 13 | Make:- Kirloskar/Siemens/Grundfoss |
| 14 | Supply, installation, testing and commissioning of Pressure switch for fire pumps of approved make,including necessary wiring and cut off valve up to central panel & other material as described in specifications. |
| 15 | Make:- Indfoss /System Sensor |
| 16 | Providing & Fixing of burden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe of 100 mm dia with Caliberation: 0-20 Kg/cm2 as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 17 | Make:- H Guru, Bell, Fiebig |
| 18 | Providing & fixing Gun metal fire hydrant single headed landing valve with 80 mm N.B. flanged inlet, s.s spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS standards as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 19 | Make: Minimax/OMEX/Padmini |
| 20 | Providing & Fixing of 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type A with Gun Metal male & female instantaneous type coupling (IS 903) (For internal and External hydrant system) as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 21 | Make: Minimax/OMEX/Padmini |
| 22 | Providing and Fixing Gun Metal 63 mm dia instantaneous pattern branch short pipe, 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 23 | Make: Minimax/OMEX/Padmini |
| 24 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 25 | 100 mm dia. |
| 26 | Makes:-Zoloto/Sant/Audco |
| 27 | Providing and fixing Cast Iron dual plated Check Valve (NRV) horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table \\"E\\" and specifications as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 28 | 100 mm dia. |
| 29 | Makes:-Zoloto/Sant/Audco |
| 30 | Providing & Fixing of wall mounting swinging type first aid fire hose reel with drum, hanging bracket, 30 Mtr. length x 20 mm dia high pressure hose reel tubing as per IS: 444 with gun metal (GM) shut off nozzle having 5 mm dia orifice. The hose reel shall be conforming to IS : 884-1985. Drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block as and when required complete in all respects and to the best satisfaction of Engineer-in-charge.. |
| 31 | Make: Minimax/OMEX/Padmini |
| 32 | Weather proof standard fire hose cabinet made of 18 SWG powder coated fibre. sheet having single or double opening glazed (3.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish (as per IS : 5, shade no. 536) with \\" Fire Hose\\" marked on front, suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 No. branch pipe & nozzle spanner as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 33 | Make: Minimax/OMEX/Padmini / |
| 34 | Providing & fixing ball valve 25mm dia. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 35 | Make: Sant/Zoloto/Audico. |
| 36 | Providing and fixing Carbon dixoide CO2 4.5 kg type fire extingushers ISI mark. CE and EN Certfied, consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and M S Wheel type complete with internal charge as required complete in all respects. |
| 37 | Make: Minimax/Aska/ Anshul Fire |
| 38 | Providing and fixing stored pressure vessel ABC 6 Kgs. Powder type fire extingushers ISI mark. CE and EN Certfied,consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. |
| 39 | Make: Minimax/Aska/ Anshul Fire |
| 40 | Providing & fixing of IS marked 15683 Water type 9 Litre (S/P) cylindrical body, squeeze lever discharge valve fitted with pressure discharge hose, discharge nozzle, etc. finished externally with red enamel paint and fixed to wall with brackets complete with internal charges. |
| 41 | Make: Minimax/Aska/ Anshul Fire |
| 42 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a surface the cable run shall be fixed on M.S. clamps etc. of suitable size & brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire |
| 43 | armoured cable 16 Sqmm(3.5 core) |
| 44 | Make: KEI/ Polycab/Finolex. |
| 45 | Fabricating & Supply, installing, testing and commissioning of sheet steel clad floor mounting control panel having suitable size for control of 1 nos. booster pumps 5.5 KW/7.5 each having suitable incoming MCCB, incoming voltmeter with selector switch and fuses. DOL Starter with hand reset overload cum single phase preventor type relay, Ammeters to read current in any one phase, alarm with reset push button which will automatically reset for the next cycle. (As per the Technical Specifications) (At Terrace floor) |
| 46 | Makes:- Advance/Delight Power Control/ Quality Fire or equivalent. |
| 47 | Supply of Water Tank 5000 Liters. Cap. and providing M.S Structure work Platefarm for the Fire Tank 5000 litrs Capacity as per tank diameater with Heavy M.S Chanel and Angel and necessery Suport, Tank Nipple,Gate ball,Union, and Over Flow Provisison,with belding Primer and Painting etc. |
| 48 | Supply and laying of G.I Pipemm dia. 25 Heay duty for feeding the Fire Water Tank with Nipple Tea, Union, Gate Balve etc. Complete in all Respect. |
| 49 | Providing Core Cutting Hole 6\\" size Complete in all Respect. Please Enable Macros to View BoQ information |
