|
| 1 | Civil Works |
| 2 | Electrical Works |
| 3 | Plaster Breaking with dado |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Including scaffolding |
| 5 | Breaking Flooring / Water Proofing |
| 6 | Breaking flooring/waterproofing/ cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in -charge.Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 7 | Removing WC /Basin/ Urinal |
| 8 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. |
| 9 | Dismantling 15 to 40 mm dia G.I. pipe |
| 10 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. Including scaffolding |
| 11 | Removing Door |
| 12 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below Including scaffolding |
| 13 | Making Opening in Wall for DOOR & Exhaust fan |
| 14 | Demolishing brick work manually/ by mechanical means including Stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. - In cement mortar |
| 15 | Providing and applying Internal plaster |
| 16 | Providing and applying 15-18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement: 6 fine sand). Including scaffolding required for it complete . |
| 17 | Providing and applying External plaster |
| 18 | Providing and applying 18mm external sand faced plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge.Including scaffolding required for it complete . |
| 19 | Ceiling /Wall/Column Repair |
| 20 | Providing and applying rust inhabitation coal/system to exposed reinforcement bars and also new reinforcement bars after removing scales and rust complete as per specification. Providing and applying bond coat to all exposed concrete surface and reinforcement bars prior to any treatment as per specification. Providing and applying single component, fiber reinforced, thixotropic repair mortar of average thickness 50mm and above of \\"'BASF\\" (MASTER EMACO 348 S) as manufacturer's specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc.including carting away debris out of AIESL/Airport premises. Including scaffolding required for it complete . |
| 21 | Lintel Work for Brick wall partition |
| 22 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 23 | Steel |
| 24 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, Including scaffolding |
| 25 | Brick wall |
| 26 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand): With Modular bricks. Including scaffolding required complete . |
| 27 | Providing & fixing False ceiling |
| 28 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 10.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using Gl slotted cleats of size 27 x 37 x 25 x1 6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm Gl adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop, made of Gl sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece, Including scaffolding |
| 29 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete, Including scaffolding |
| 30 | Flooring for Toilet |
| 31 | Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints withwhite cement and matching pigments etc., complete. |
| 32 | Waterproofing in all toilet area |
| 33 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”:With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 34 | Floor Polishing |
| 35 | Carrying-out Mirror Polishing on Marble work/ Granite work /Stone work /kota work etc, where ever required to give high gloss finish |
| 36 | Providing & Fixing Glass For Window / Ventilator |
| 37 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) |
| 38 | Providing & fixing Door Frame |
| 39 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face)& 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm |
| 40 | Providing & fixing Doors |
| 41 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick |
| 42 | Servicing of Existing MS GATE DOOR |
| 43 | Repairing existing M.S. double-leaf wire mesh door including cutting, welding, replacement of damaged members/mesh, alignment of shutters, providing hinges,latch & aldrop as required, cleaning of surface by wire brushing, applying one coat of steel primer and two coats of synthetic enamel paint,making it serviceable complete as per direction of Engineer-in-Charge.” |
| 44 | Providing Door Closer |
| 45 | Repairing existing M.S. window including cutting, welding, replacement of damaged members, alignment of shutters, providing hinges,latch & aldrop as required, cleaning of surface by wire brushing, applying one coat of steel primer and two coats of synthetic enamel paint,making it serviceable complete as per direction of Engineer-in-Charge.” |
| 46 | Servicing of Existing MS Ventilator |
| 47 | Repairing existing M.S.Ventilator including cutting, welding, replacement of damaged members, alignment of shutters, providing hinges,latch & aldrop as required, cleaning of surface by wire brushing, applying one coat of steel primer and two coats of synthetic enamel paint,making it serviceable complete as per direction of Engineer-in-Charge.” |
| 48 | Providing Handle |
| 49 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm |
| 50 | Butt Hinges |
| 51 | Providing and fixing ISI marked aluminium butt hinges anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete125 x 75 x 4mm |
| 52 | Door Closer |
| 53 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 54 | Providing Aldrop |
| 55 | Providing and fixing aluminium sliding door bolts , ISI marked anodised ( anodic coating not less than grade AC 10 as per IS 1868 ) ,transparent or dyed to required colour or shade , with nuts and screws etc. complete 300x16 mm |
| 56 | CPVC Plumbing line Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 57 | 20 mm nominal dia Pipes |
| 58 | 25 mm nominal dia Pipes |
| 59 | PVC pipe Providing and fixing PVC rain / Waste water pipe of ‘’Prince’’ or equivalent approved make conforming to IS 13592 of SWR quality 4 kg/cm2 pressure rated, at any locations and at all levels, scaffolding etc. including all PVC fittings like bends, shoes, clamps, supports etc. jointing with rubber ring/ solvent cement, leak proof adhesive etc. cutting and making good the walls and floors etc. complete. As per instruction of EIC.40 mm dia with GI clamps & GI brackets(Vertical pipes should be fitted 50 mm away from the wall) |
| 60 | 75 mm |
| 61 | 110 mm |
| 62 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : |
| 63 | 150 mm diameter |
| 64 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :For pipes 100 to 250 mm diameter |
| 65 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 66 | Gun Metal gate valve |
| 67 | 150 mm diameter |
| 68 | Internal Paint (OBD) |
| 69 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) Including Sacffolding . |
| 70 | External Paint |
| 71 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats |
| 72 | SEP Painting |
| 73 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 74 | New Basin |
| 75 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.including all fittings |
| 76 | Providing & Fixing EWC with flushtank |
| 77 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 78 | Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type WC. 8 mm dia C.P. Brass/ S.S. |
| 79 | two way bib cock |
| 80 | Providing & Fixing Urinal |
| 81 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 82 | Providing and fixing G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe single lipped urinal |
| 83 | Providing and fixing Stop cock with necessary hardware & fittings. |
| 84 | Providing & fixing Nahani trap of self cleansing design with C.I. grating screwed down or hinged pattern with or without vent arm complete including cost of cutting and making good the walls and floors. 100mm inlet and 75mm outlet etc. complete. |
| 85 | Carting away DebrisDisposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 86 | SITC of 3 Core, 4 sqmm, Aluminum armoured cable with saddles, spacers and all other required hardware and consumeables to complete the job. |
| 87 | Installation of twin flame proof Tube light fitting with glanding and connection. (Existing Tube light required to be removed from old location and refitted on proposed location). |
| 88 | Installation of down rod bracket. |
| 89 | Installation of anchor fastner. |
| 90 | Installation of down rod. |
| 91 | Making of flame proof glands. |
| 92 | Installation of 12 inch exahust fan with MS frame and electrical connection.(Existing fan required to be removed from old location and refitted at proposed location). |
| 93 | Removal, shifting of Main Electric panel from existing location and reinstallation at proposed location. |
| 94 | Cleaning, servicing and greasing of existing roller shutter. |
| 95 | Removal of old unwanted wiring, conduit etc. Please Enable Macros to View BoQ information |
