|
| 1 | Material and Labour for complete removal of existing any type of existing roof treatment including bedding layer of concrete/mud any thickness in cement mortar and including carefully removal of solar plates and refixing the same at same place after the execution of work disposed from MD land complete all as specified and as directed. |
| 2 | Material and Labour for cement concrete 1 : 2 : 4 type B-1 (using 20 mm graded stone aggregate) laid as in padding 50mm thick average over roof slabs for providing proper slope including finishing surface even and smooth without unsing extra cement with admixture of WPC liquid 150 ml per bag of cement complete all as specified. Note : WPC will be measured and paid separately. |
| 3 | Cleaning and preparation of the surface to receive Fosroc Proofex ORG or its equivalent in approved make water proofing system shall be a sound base, any crack shall be treated with cementious repair mortar of Fosroc Renderoc CS or epoxy crack filling mortar by proper grooving arrangement all as directed by engr - in charge. |
| 4 | Providing and laying / fixing TPO membrane of nonflammable waterproofing of roof which shall be a 1.5mm thick loose laid TPO membrane layers overlapped to achieve a minimum weld of 110mm, Hot air welding can be either handapplied or by means of automatic machines and the rolls either end are overlapped with layers of non-woven geotextilefiber, the separation layer provided to prevent the mechanical abrasion and cushioning between the Fosroc Proofex ORG membrane or its equivalent in approved make and the concrete substructure, the termination of Fosroc Proofex ORG or its equivalent in approved make by aluminium strip anchoring.Note: Work shall be executed by authorised applicator with prior experience of more than 5 years in applying similar system. |
| 5 | Material and Labour for dismantling loose concrete cover of RCC slab, ceiling , columns, beams,chajja, balconies, staircase and as direceted, roughening and cleaning concrete surfaces with steel wire brushes, removing of rust from existing steel surfaces with rust removers of SIKKA restoff 100 applied two coast @0.15kg/Sqm per coat of steel surface and cleaning all rust with steel wire brush and washed with water and allowed to dry incl Supply and Fixing welded fabric GI wire mesh or wire , size not less than 75 x 75 mm and 3 mm dia as reinforcement to concrete. After placing the additional re-inforcement, all concrete surfaces shall be throughly scurbbed with brushes, washed with water and allowed to dry to this surface , apply chenmical policrete admixture at the rate not less than 2% by weight of cement and providing minimum 30 mm thick (average thickness) guniting mix (using 1 part of oridinary poartland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive/admixture at the rate as directed) with a pressure of 2.2 to 2.5 kg per sqm by guniting machine and surfaces finished even and fair including necessary padding, shuttering form work etc and finally applying 5 mm thick cement plaster in CM 1:3 complete all as specified and directed by Engineer-in-Charge. |
| 6 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) not exc 1.5 Sqm each incl removing complete all as specified and directed by Engr-In-Charge. |
| 7 | Supply and Fixing aluminium chequered grill of anodized section pf mesh100x100mm or 80x80mm of 4/ 8/6/mm dia of bar fixed to frame with 20x20mm aluminium flat section with screw complete all as specified and as directed. |
| 8 | Material and Labour for 16-18mm thick Granite slab on top of cooking plateform, bar counter window sill and simillar work including cutting polishing rounding on edge etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in CM 1:4. including grinding and polishing complete all as specified and directed by Engr-In-Charge. |
| 9 | Supply and Fixing for powder coated (minimum thickness of powder coating 50 micron) aluminum anodized three track slinding window with two or more shutter with 5 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catlogue etc as specified as per manufacturer instructions with the following size, complete all as specified and directed by Engr-in-Charge.Note : (1)Glass and wire not measured and paid separately however cost of all other connected accessories deemed included in unit rate. (2) faces of windows jamb should be given fair finish before fixing the window as per requirement of site |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr in Charge. |
| 11 | Material and Labour for removing old lime wash (if any) ,hacking for key , raking out joints of old bricks or stone work built in cement or cement lime mortar to receive plaster complete all as specified and directed by engr in charge. |
| 12 | Material and Labour Glazed coloured ceramic tiles in vertical surface/ dado 450X 300X 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 13 | Material and Labour vitrified tiles 10 mm thick ceramic coloured tiles 10 mm thick (square/rectangular) area of each tiles exc 0.18 sqm but n. exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed. |
| 14 | All as per item No 12.00 here-in-before but as vertical surfaces such as doado/skirting over and including renderning 10 mm thick in CM 1:4 complete all as specified and as directed. |
| 15 | Material and Labour for Non skid ceramic coloured tiles (300x300)x7 mm thick in floors etc. Set and jointed in neat cemenbt slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortar 1:6 complete all as specifed and directed. |
| 16 | Dismantling of Stone slabs laid, bedded and pointed in any mortar complete all as specified and directed. |
| 17 | Material and Labour for screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed. |
| 18 | Material and Labour for machine cut kota stone slab flooring 20-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror polish. |
| 19 | M/L for machine cut kota stone slab 20-25mm thick as in riser of steps, skirtings, dados etc over 10 mm thick cement screed in cm (1:6) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror polish |
| 20 | Material and Labour grinding, rubbing and mirror polishing of existing kota stone flooring/skirting complete all as specified and directed. |
| 21 | Material and Labour 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in sub base of floor. Complete all as directed. |
| 22 | Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed. |
| 23 | Material and Labour providing & fixing in repairs false ceiling with Semi perforated 12mm thick acoustical false ceiling, (fire retardant and sound absorbent) micro regular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 475 (Part 4) -1970 and light code description unit rate No 429 Sub Head : 26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per sqm including both sides) comprising of maint -T runners of size 15x32mm of length 300mm, cross -T of size 15x32 of length 600mm to form grid module of size 600x600mm , suspended from ceiling using galvanised mild steel items (galvanising @80 grams per sqmm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-Shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on perimeter wall /partition with the help of plastic rawl plugs at 450mm centre to canter and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engr-in charge. Make- Diamond Ceiling/Brand Tm |
| 24 | Material and Labour for PVC profile for wall paneling of size 23cm wide, 8mm over all thick and 01mm wall thickness fixed with screw to mild square tubular steel frame work mad e out of MS Hollow section of size 25mm x 15mm x 2mm spacing 01 meter on both side frame work shall be fixed in wall with the help rawl plug and required length of screws and MS work shall painted with one coat of Red oxide primer for wall panelling,complete all as specified and directed by Engr-In-Charge. |
| 25 | Taking down door chowkats or frames with shutters, any type (without taking off shutters from the frame) area exceeding 1.5 sqm but n.exc 4.0 sqm ) all as specified and directed by engr in charge. |
| 26 | Supply and Fixing 30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 27 | Supply and Fixing 1st class HW glazed and skelton 30mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass. Gauze etc and all as specified. |
| 28 | Supply and Fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples complete all as specified and as directed. |
| 29 | Supply and fixing of Butt hinges, medium wt, cold rolled, mild steel of size 100mm complete all as specified and as directed. . |
| 30 | Supply and Fixing Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sectionSupply and Fixingixing bolts & sliding bolts of extruded sections or cast aluminium alloy. |
| 31 | Supply and Fixing 200 mm length aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed. |
| 32 | Supply and Fixing 150 mm size aluminium handle, cast type anodized complete all as specified and as directed. |
| 33 | Material and Labour for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fasts including necessary use and waste of form work complete. |
| 34 | Supply and Fixing mild steel work as in holdfast made out of flat iron 25mmx5mm including necessary welding or fixing nuts and bolts complete. |
| 35 | Supply and Fixing in repair 3000 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete. |
| 36 | Supply and Fixing second class hard wood, plain solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 37 | Material and Labour applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete. |
| 38 | Taking down cement plaster on brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and disposed off unserviceable materials to out side of MOD land complete all as specified and as directed. |
| 39 | Material and Labour 10 mm thick cement mortar 1:6, on unven surface of brick work or concrete surfaces on wall ( internal surfaces) surface even and smooth without using any extra cement all as specified and directed by engineer in charge. Note : work will be executed upto fourth floor using scaffolding. |
| 40 | Material and Labour for rendering 5mm thick on fair faces of brick work orceilings or concrete surfaces in cement mortar (1:3) as in ceiling, complete all as specified and as directed by engineer in charge . |
| 41 | Material and Labour 15 mm thick cement mortar 1:4 on other than fair faces of brick work or concrete surfaces on wall surface even and smooth without using any extra cement all as specified and directed by engineer in charg. Note : work will be executed upto fourth floor using scaffolding |
| 42 | Material and Labour Preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion over a coat of primer on walls complete all as specified and as directed. |
| 43 | Material and Labour preparation of newly plastered surface and applying three coats of white wash on ceilings complete all as specified and as directed. |
| 44 | Material and Labour for preparing new surface and applying exterior paint (weather coat, apex ultima) of required shade,Two coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm, complete all as specified and as directed by Engineer-in-Charge. make : Asian/Berger |
| 45 | Material and Labour for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply Two coats of distempering Ist quality acrylic distemper (ready mixed) having VOC content less than 50 gm/litre of approved manufacturer of required shade and colour over a coat of 1.50 mm thick (average) wall care putty to bring the surface even and smooth complete all as specified and as directed. |
| 46 | Material and Labour for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply two coats of white wash on ceilings complete all as specified and as directed. |
| 47 | Material and Labour for complete removal of existing treatment machanically or mannually on old surface of wall and preparing surface and applying two or more coats 100 % acrylic based exterior emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt reistance 1st quality exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltr /10 sqm over and including priming coat of exterior grade primer applied @ 0.90 litre/10 Sqm including change of existing colour if required complete all as specified and as directed by Engineer-in-Charge. Note; work will be executed upto fourth floor |
| 48 | Demolition of unreinforced cement concrete in ground floors and pavings n. exc. 15 cm in thickness (below or above GL) complete all as specified and as directed. |
| 49 | Material and Labour for 75 mm thick PCC 1:3:6 type C2 as in Plinth Protection using 40 mm stone aggregate including making jointSupply and Fixingilling with sand bitumen mastic complete all as specified and as directed. . |
| 50 | Supply and Fixing in repair to rotational moulded vertical water storage tanks triple layer ( White colour) with closed tops ( cylindrical ) hoisted and fixed in position 1000 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply and Fixing in repair to rotational moulded vertical water storage tanks triple layer ( White colour) with closed tops ( cylindrical ) hoisted and fixed in position 2000 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply and Fixing in repairs of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and as directed. |
| 53 | Supply and Fixing in repairs Gun-metal, glabe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed dia of bore of pipe 20mm complete all as specified and directed by Engr-In-Charge. |
| 54 | Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store and Supply and Fixing 15mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specifed and directed.complete all as specifed and directed. |
| 55 | Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store and Supply and Fixing 20 mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specifed and directed.complete all as specifed and directed. |
| 56 | Demolition of concrete of any description and in any position not otherwise specifically provided for.complete all as specified and directed by Engr-In-Charge. |
| 57 | Material and Labour cement concrete chequered tiles of size 300 x 300 x 20- 25 mm thick machine pressed tiles, set and jointed in neat cement slurry in floors with grey cement and no pigment over and including 15 mm thick screed bedding layer in CM 1:6 complete all as specified. |
| 58 | Material and Labour for 60 mm thick, M-35 grade machine pressed rubber form moulded precast interlocking concrete coloured (Red/yellow) paver block , in any shape and size with grey cement and pigment as approved confirming to IS 15658-2006 complete all as specified and directed by Engr-in-Charge. |
| 59 | Material and Labour for 75 mm thick Cement concrete type D-2,(1:4:8) (40mm graded aggregate) as in sub floors, sub bases, floors and pavings/ paver blocks etc. complete all as specified and as directed. |
| 60 | Material and Labour spreading and levelling of sand average 25 mm thick below inter locking paver complete all as specified and directed. |
| 61 | Material and Labour cement concrete 1:2:4 type B-0(using 12.5 mm graded stone aggregate) as in roof kerb or mud stops rounded or chamfered on edge complete all as specified and directed by Engineer-in-charge. |
| 62 | Demolition of cement concrete (reinforced) of any position not otherwise specially provided for and removing debries out side of MoD land complete all as specified and directed by Engineer-in-charge. |
| 63 | Material and Labour RCC 1:2:4 as in chajja, fins, parapet wall & roof projection complete all as specified and directed by Engr - in -Charge . |
| 64 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beam chajja etc hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 65 | Supply and Fixing mild TMT steel bars 6 to 8 mm dia TMT bars cut to length , bent to shape required including crancking , hooking end and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified. |
| 66 | Material and Labour Form work to chajja, fins, parapet wall & roof projection complete all as specified and directed by Engr-in-charge. |
| 67 | Material and Labour as in repair for providing precast cement concrete type B0 (1:2:4) (12.50 mm graded aggregate) set in cement mortar (1:4) louvers and jallies 35.00 mm thick (measured solid), including all mouldings , including dismantling of existing jalli if any complete all as specified. |
| 68 | Supply and Fixing in repair stainless steel pipes of 20-25 mm dia having wall thickness 1.40mm minimum as in curtain rods including bracket of steel to two number to each curtain rod and end caps of approved pattern complete all as specified and directed |
| 69 | Demolition of brick/concrete block walling, RR masonary in cement mortar including all quoins archas pillars etc and pre-cast block walling etc complete all as specifed and directed. |
| 70 | Material and Labour for brick work with sub-class `B' bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 71 | Dismantling plain /corrugated steel sheeting any gauge thick ness including Nainital and similar pattern complete all as specified and directed. |
| 72 | Supply and Fixing for fibre glass reinforced translucent plain decorative sheeting having thickness 3mm textured surface side lap fixed with coach screw and washer in roof wall chain link fencing etc cranked hook bolts complete all as specifed and directed. |
| 73 | Supply and Fixing for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 74 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.. |
| 75 | Supply and Fixing roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 410-W (Gde E- 250) quality A complete all as specified and as directed. |
| 76 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 77 | Material and Labour cement concrete 1:3:6 type C-2 (40mm graded stone aggregate) in foundations, filling and mass concrete. |
| 78 | Material and Labour Forming 20mm thick or more for crumple joint filled with pre-formed filler in 30mm thick brick /stone wall including scaffolding complete all as specified and directed by Engr-In-Charge. |
| 79 | Supply and Fixing Plain, Aluminium sheeting of thickness 0.71mm , Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed complete all as specified and directed by Engr-In-Charge. |
| 80 | Supply and Fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engr-In-Charge. |
| 81 | Supply and Fixing 75 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches/floors/wall (using GI half round Clamp etc including removing from site complete all as specified and directed by Engr - in- charge. |
| 82 | Supply and Fixing 75mm bore pipe PVC (SWR) bends any radius door complete all as specified and directed by Engineer-in-Charge |
| 83 | Supply and Fixing bands, straps supports or stays for rainwater ,ventilation pipes, including bolts if required conforming to fe-290 Gde-E-165 completely all as directed and specified by engiineer in charge. |
| 84 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 85 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
