|
| 1 | Taking down chowkats and shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4Sqm each complete in all respect as specified and directed. |
| 2 | Taking down shutters exc 1.0 sqm but n. exc 2 Sqm each complete in all respect as specified and directed. |
| 3 | Dismantalling of cement concrete (unreinforced) in ground floors and pavings not exceedings 15 cm thickness (below or above ground level), complete in all respect as specified and directed. |
| 4 | Dismantalling of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete in all respect as specified and directed. |
| 5 | Taking down cement plaster of any thickness and description on brick/ concrete/ stone wall/ ceilings, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete in all respect as specified and directed. |
| 6 | Taking down chowkats and shutters (without taking off shutters from the frame) n.exc 1.5 sqm each, complete in all respect as specified and directed. |
| 7 | Material and labour for 40mm thick PCC (1:2:4) type B1 (using 20mm nominal size, crushed and graded stone aggregate) as in hardstanding/flooring, finished the surface fair and even complete in all respect as specifified and directed. |
| 8 | M & L PCC (1:2:4) type B-1 using 20 mm nominal size crushed and graded stone aggregate in coping, hold fasts or of similar items including necessary cutting, form work etc.cement complete in all respect as specified and directed. |
| 9 | M & L for brick work with old size sub-class 'B' bricks, class designation 75, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete in all respect as specifified and directed. |
| 10 | M & L for half brick work with old size sub-class 'B' bricks, class designation 75, built in cement mortar 1:4 complete in all respect as specifified and directed. |
| 11 | M & L for rendering/plastering 10mm thick in cement mortar 1:3 on faces of brick or concrete surfaces and finished the surface even and smooth without using extra with water proofing compound over chajja, coping etc complete in all respect as specifified and directed. (Water proofing compound shall be measured and paid under supply item only) |
| 12 | M & L for rendering/plastering 15 mm thick in cement mortar 1:4 on faces of brick or concrete surfaces and finished the surface even and smooth without using extra cement complete in all respect as specifified and directed. |
| 13 | M & L for rendering/plastering 15 mm thick in cement mortar 1:6 on faces of brick or concrete surfaces and finished the surface even and smooth without using extra cement complete in all respect as specifified and directed. |
| 14 | M & L for preparation of old decorated plastered or unplastered surface of wall and apply two coats of white wash complete in all respect as specified and directed. |
| 15 | M & L for preparation of new unplastered surface of wall and apply two coats of white wash complete in all respect as specified and directed. |
| 16 | S & F stainless steel wire cloth, 0.32 mm nominal dia of wire and average width aperture 1.80 mm and fixed with stainless steel wire staples fixing with beads etc., complete in all respect as specified and directed. |
| 17 | S & F for Factory made single extruded WPC (wood polymer composite) solid door/ window / ceosetory windows & other frames / chowkhat of size 50x125 mm comprising of virgin PVC polymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibers (wood power / rice husk /wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having maximum frame density of 750 kg / cum, screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum comprssive strength of 58 N / mm², Modules of elasticity 900 N / mm² and resistance to spread of flame of class A category with property of beeing termite / borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast / lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast / lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door / window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 18 | S & F for Factory made single extruded WPC (wood polymer composite) solid door/ window / ceosetory windows & other frames / chowkhat of size 65x150 mm comprising of virgin PVC polymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibers (wood power / rice husk /wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having maximum frame density of 750 kg / cum, screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum comprssive strength of 58 N / mm², Modules of elasticity 900 N / mm² and resistance to spread of flame of class A category with property of beeing termite / borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast / lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast / lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door / window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 19 | Providing and fixing in position kitchen cup board box type as per design and directed of 600-700mm deep, fixed over wall with PVC gittie and screws/or in beneath of kitchen counter, cup board, kitchen cabinet in required sizes as per site made out of 17-18mm thick one side decorative lamination and other side balancing lamination sheet consisting of carcass 17-18mm thick PVC sheet. Provision of shelves, shutters, back side, top, bottom, side, made out of 17-18mm thick one side decorative laminated PVC sheet , all required brackets, screws etc,. The panel shall be fabricated using adhesives and screws whereever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per maufactures specifications and drawing including 15mmX20mm medium grade chrome finish two nos per leaf, slip on cabinet hinge/self-closing hinge, soft close hydraulic 4 hole cabinet auto cup hinge full overlay O crank with soft closing of make Godrej/Avis L Bihari/Hettich/Harrison and 50mm SS handle size all items each per shutter including taking down of existing box complete in all respect as specified and directed. Make: Rajshri Plastiwood, Sintex or of appd make. (Note: For payment, measurement shall be taken as front portion of cup board measurement only, rest other items/materials as specified shall not be measured or paid as these are included in this item) |
| 20 | Providing and fixing in position kitchen cup board box type as per design and directed of 250-300mm deep, fixed over wall with PVC gittie and screws/or in beneath of kitchen counter, cup board, kitchen cabinet in required sizes as per site made out of 17-18mm thick one side decorative lamination and other side balancing lamination sheet consisting of carcass 17-18mm thick PVC sheet. Provision of shelves, shutters, back side, top, bottom, side, made out of 17-18mm thick one side decorative laminated PVC sheet , all required brackets, screws etc,. The panel shall be fabricated using adhesives and screws whereever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per maufactures specifications and drawing including 15mmX20mm medium grade chrome finish two nos per leaf, slip on cabinet hinge/self-closing hinge, soft close hydraulic 4 hole cabinet auto cup hinge full overlay O crank with soft closing of make Godrej/Avis L Bihari/Hettich/Harrison and 50mm SS handle size all items each per shutter including taking down of existing box complete in all respect as specified and directed. Make: Rajshri Plastiwood, Sintex or of appd make. (Note: For payment, measurement shall be taken as front portion of cup board measurement only, rest other items/materials as specified shall not be measured or paid as these are included in this item) |
| 21 | S&F 75 mm size of butt hinges stainless steel, complete in all respect as specified and directed. |
| 22 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady theframe., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 23 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) flush door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 24 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panel door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 25 | Supplied and fixed Aluminium handle cast type anodised 125 mm size complete in all respect as specified and directed. |
| 26 | Supplied and fixed Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm complete in all respect as specified and directed. |
| 27 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete in all respect as specified and directed. |
| 28 | S & F for 4mm thick sheet glass ordinary quality and glazing with oil putty in square complete in all respect as specified and directed. |
| 29 | S & F for 4mm thick frosted/figured sheet glass ordinary quality and glazing with oil putty in square complete in all respect as specified and directed. |
| 30 | S & F anodized aluminium sliding windows shutters without sash bars, aluminium sections weighing (side and top section not less than @ 0.634Kg/m, bottom @ 0.606 Kg/m, locking section @ 0.734 Kg/m) including necessary jointing cleats, galzing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings like locking arrangments and suitable handles for sliding purpose, 4mm thick plain glass and stainless steel wire mesh of dia 0.32mm and average width of aperature 1.80mm, wheels etc. including cost of three track anodized aluminium frame/chowkhat complete in all respect as specified and directed. |
| 31 | Material and labour for preparation of newly plastered surface of walls and applying two coat of weather coat over 2mm thick wall care putty and a coat of primer including rubbing and all necessary preperation complete in all respect as specified and directed. |
| 32 | S & F Anodised aluminium ventilator with half portion louvered (adjustable)with 4mm thick glass in louver and balanced portion fixed 4mm thick frosted glass glazing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete in all respect as specified and directed. |
| 33 | M & L for anodised aluminium grill for doors, windows, ventilators including joining cleat for fixing etc. complete in all respect as specified and directed. |
| 34 | S&F rolled section as in framing for water tank frame, door/ vent/ CB chowkhats and the like fixed with angle cleat and connecting plates etc. using FE-410W (Grade E-250 quality \\"A\\") (Butt hinges shall be measured and paid for separately), complete in all respect as specified and directed. |
| 35 | M&L for preparation of new undecorated steel surface of any description not otherwise described, not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed. |
| 36 | S&F 100 mm size of mild steel butt hinges ISI marked, complete in all respect as specified and directed. |
| 37 | S & F mild steel sections (Beam, tee, angle, channel or flat sections) in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing, independent fixing with welding etc. including distance pieces, cleats etc. using Fe 410-W (Gde E-250) quality A complete in all respect as specifified and directed. |
| 38 | Supply and fixed 2nd class hard wood plain fillets, with sectional area exc. 6Sqcm but not exc. 13Sqcm in square, rectangular or triangular in section, clean sawn, secured with nails or beads etc. complete in all respect as specified and directed. |
| 39 | Material and labour for 25mm cement concrete type B-0, 1:2:4 (using 12.5 mm crushed and graded stoone aggregate) in flooring and finishing the cement concrete surface even and smooth without using extra cement including dismanatlling of existing PCC floor complete in all respect as specified and directed. |
| 40 | Supply and fixed in repair 300 mm long, mild steel ordinary rat tail rod pattern springs, including roller and roller plate including necessary welding if required, complete in all respect as specified and directed. |
| 41 | S&F in repair 20mm dia PVC coated over mild steel tube including bracket, stops, rollers etc. complete all as specified and directed. |
| 42 | M & L for preparation of old decorated plastered surface of ceiling and applying two coats of oil bound distemper including filling of voids with wall care putty on plastered/unplastered surface including complete removal of existing treatment complete in all respect as specified and directed. |
| 43 | S&F in repairs particle board, 12 mm thickness, interior grade,, both side decorated, fixed with screws/ nails to timber frame work, complete in all respect as specified and directed. |
| 44 | Supply & fixed in repair for the following items at any location, position etc. complete all as specified and directed.:- |
| 45 | 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolts, plate type, stove enamelled bolt not less than 12 mm dia with and including a minmum of 06 bolt plate and two on staple plate. |
| 46 | 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed. |
| 47 | 125mm long Aluminium anodised, handle cast type |
| 48 | But Hinges 100 mm, medium weight, cold rolled mild steel, and fixed (ISI) |
| 49 | Continous (piano) hinges, mild steel , bright finish with width of flaps 30mm |
| 50 | S&F in repair steel windows and ventilator with projecting & top hung shutter respectively including hinges, steel peg stay complete in all respect as specified and directed. |
| 51 | Material and labour for preparation of newly undecorated plastered surface of wall and applying three coats of cement based paint over one coat of alkali resistant priming paint including filling of voids/surface with wall care putty on plastered surface complete in all respect as specified and directed. |
| 52 | Material and labour for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2mm thick (in two layers), wall care putty complete in all respect as specified and directed. |
| 53 | Supply and Fix exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping , of grid size 600x600mm comprising of wall/cleat angle of size 25x25x0.35mm and cross tee of size 24x38x0.70mm with 4mm dia GI wire as suspender and including 4mm thick decorative pre -painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/wooden truss of any type including dismantalling of existing false ceiling complete all as specified and directed. (Make: Eternit, Everest or equivalent) |
| 54 | S&F 2nd class Hard wood scanttlings, wrought in any position for framed work jointing wirh nails, screws, nut bolt etc. including necessary supports to existing truss including Dismantling of timber scanttlings 40 Sqcm & over in section, in any position for framed workcomplete all as specified and directed. |
| 55 | M & L for preparing surfaces of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote oil complete in all respect as specified and directed |
| 56 | Material and labour for preparation of new undecorated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete in all respect as specified and directed. |
| 57 | S&F 25 mm thick Flush shutters, solid core construction, with block board core with decorative face veneers withlipping on both sides, complete in all respect as specified and directed. |
| 58 | Taking down existing unservicable and S&F of new plate rack made out of stainless steel sheet of 0.5 mm thick with overall size 760 mm (H) x 900 mm (W) x 250 mm (D) with three shelves complete all as specified and directed. |
| 59 | S&F of Hasp and staple 100 mm size, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed. |
| 60 | S&F of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate as 150 mm complete all as specified & directed. |
| 61 | S & F 18-19mm block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including necessary leaping/edge margin of 3mm thick complete in all respect as specified and directed. Please Enable Macros to View BoQ information |
