|
| 1 | Schedule I - (Repair & Maintenance of existing Open Shed at Cricket Ground for utilization as Gymnasium at BNP Dewas) Price bid for Schedule - I Name of Work: Repair & Maintenance of existing Open Shed at Cricket Ground for utilization as Gymnasium at BNP Dewas S.no. Description of the Items Qty. Unit Rate per Unit Amount= Rate per unit * Qty |
| 2 | Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete : Cement mortar 1:4 (1 cement : 4 sand) |
| 3 | 12 mm cement plaster of mix : 1:4 (1 cement : 4 sand) |
| 4 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. |
| 5 | Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : Two coats. |
| 6 | Providing and fixing 4 mm thick exterior grade ACP sheet cladding over MS framework including cutting, bending, fixing with screws/fasteners, sealing of joints and all accessories as per required shade complete with applying red oxide primer as directed by Engineer-in-Charge. |
| 7 | Providing and fixing 6 mm thick UV coated transparent plain polycarbonate sheet on MS frame including necessary profiles, rubber gaskets, stainless steel screws, sealing of joints with silicone sealant, cutting to required size and fixing in position with applying red oxide primer on frame complete as directed by the Engineer-in-Charge. |
| 8 | Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. : Hot finished welded type tubes |
| 9 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 11 | Providing and fixing 8 mm dia MS anchor bars for tying brick masonry with existing RCC columns by drilling holes in column and embedding bars in masonry joints complete as per direction of Engineer-in-Charge. |
| 12 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 13 | Providing and fixing 6 mm thick heavy duty rubber gym flooring mat/roll over existing hard base floor including cleaning of surface, applying adhesive, laying, cutting to required size, joint finishing and complete as per required shade as directed by Engineer-in-Charge. |
| 14 | Providing and fixing three track aluminium sliding window of size 4 ft × 3 ft fabricated from approved aluminium section (18 gauge thickness), including three sliding shutters in which two shutters fitted with 4 mm thick polycarbonate sheet and one shutter fitted with galvanized wire mesh complete with aluminium frame, locking system, rubber gasket/beading, stopper, brush sealing, necessary screws, fasteners and all accessories as per approved drawing and direction of Engineer-in-Charge. |
| 15 | Providing and fixing aluminium door of size 6 ft × 7 ft with two panels / shutters fabricated from approved aluminium section 18 guage with mid rail, comprising bottom panel with 4mm thick Aluminium Composite Panel (ACP) sheet and upper panel with 4mm thick polycarbonate sheet, complete with all necessary fittings and accessories as per approved drawing and direction of Engineer-in-Charge. Note: The door shall be fixed in existing / separately provided MS frame. The cost of MS frame shall be measured and paid separately under relevant item. |
| 16 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 17 | Providing and fixing thermal insulation with aluminium foil laminated air bubble insulation sheet of 5 mm thick (double side reflective) under roof / structural surface, fixed with suitable mechanical fasteners, washers and aluminium tape sealing at joints, including proper overlapping to ensure continuous thermal barrier, complete as per approved drawing and direction of Engineer-in-Charge. |
| 18 | Providing and fixing PVC false ceiling of approved quality and design with PVC panels of 7-8 mm thick thick (as specified) including suspended GI framework, supporting system, hangers, edge trims, necessary fittings and accessories complete as per approved drawing and direction of Engineer-in-Charge. |
| 19 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. : In cement mortar. |
| 20 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. : 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter |
| 21 | Providing and fixing three track aluminium sliding window of size 4 ft × 3 ft fabricated from approved aluminium section (18 gauge thickness), including three sliding shutters in which two shutters fitted with 4 mm thick polycarbonate sheet and one shutter fitted with galvanized wire mesh, complete with aluminium frame, locking system, rubber gasket/beading, stopper, brush sealing, necessary screws, fasteners and all accessories as per approved drawing and direction of Engineer-in-Charge. Note: The item also includes removal and dismantling of existing old wooden window / window frame with proper disposal of debris and making necessary repairs to the surrounding wall / opening surface for fixing of new aluminium window. |
| 22 | Providing and fixing wind driven turbo ventilator of 600 mm diameter made of aluminium / stainless steel sheet with aluminium base plate suitable for fixing on roof, including cutting of roof sheet, providing flashing, nut-bolt, sealant, necessary fixtures and making the joint watertight complete in all respect as per direction of Engineer-in-Charge. |
| 23 | Providing, Supplying, Installation, Testing and Commissioning of complete electrical installation for Gym Hall including 16 nos. 15 Watt LED light fittings,04 nos. ceiling fans 1200 mm sweep, 02 nos. 300 mm exhaust fans, 10 nos. 16 Amp power sockets for gym equipment,18 COB 5 watts lights, modular switch boards, internal copper wiring in PVC conduit, distribution board (DB) with MCBs, switches, regulators and all necessary accessories required for proper functioning of the system, complete as per site requirement and as directed by the Engineer-in-Charge. Total GST@18% Grand Total for schedule I Schedule II - (Modification of Staircase at Baba Saheb Ambedkar Garden BNP Dewas) Price bid for Schedule - II Name of Work: Modification of Staircase at Baba Saheb Ambedkar Garden BNP Dewas S. No. Description Qty. Unit Rate per Unit Amount= Rate per unit * Qty |
| 24 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. : Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). |
| 25 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 26 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : M-20 Grade concrete |
| 27 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 28 | Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. : Hot finished welded type tubes |
| 29 | Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete.: Size 600X600 mm thickness 9-10 mm |
| 30 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineerin- charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 32 | Providing and fixing glow sign board of approved size made of Acrylic sheet & MS frame structure, fitted with vinyl lettering , including LED tube / LED modules for illumination, complete with wiring, power supply, necessary fittings, nuts, bolts, clamps etc., fixed in position as per approved design and direction of Engineer-in-Charge, complete. Total Add 18 % GST Gross Total FOR Schedule II Total= Gross Total FOR Schedule I + Gross Total FOR Schedule II Note: Evaluation method shall be total valuewise evaluation and contract shall be placed to L1 firm on totality basis Total Financial Implication: S No. Schedules Description of Work Amount |
| 33 | Schedule I |
| 34 | Schedule II Grand Total (Inclusive taxes) Note: Evaluation method shall be total valuewise evaluation and contract shall be placed to L1 firm on totality basis |
