|
| 1 | Earth work in excavation in foundation trenches in hard soil (vide classification of soil item - A+B) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as perbuilding specification and direction of E/I.B.C.D. S.O.R. Item No. 5.1.1 + 5.1.2 |
| 2 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royaly and taxes all complete as per building specification and direction of E/l. B.C.D. S.O.R. Item No. 5.1.10 |
| 3 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.6.3 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) B.C.D. S.O.R. Item No. 5.3.1.2 |
| 5 | Providing 50mm thick cement concrete flooring (1:2:4) with 20mm to 6mm size graded stone chips finished with floating coat of neat cement panels, including cost of curing, finishing the surface smooth by rubbing with carborundum stone taxes royalty all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.6.9 |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) B.C.D. S.O.R. Item No. 5.3.1.1 |
| 7 | Supply of iron and steel material (Plate) - Over 8mm and upto 10mm thickness B.C.D. S.O.R. Item No. M-195 (a) (iii) |
| 8 | Supply of iron and steel material (Joist or I-Section) - 175mm x 85mm (Grade A) B.C.D. S.O.R. Item No. M-195 (c) (iv) |
| 9 | Labour of hoisting, placing and fixing in position R.S. Joist or tee including cutting to required shape and size straightening all complete job (but excluding the cost of joist or Tee) as per direction of E/I. B.C.D. S.O.R. Item No. 5.5.26 |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes D.S.R. Item No. 10.16.1 |
| 11 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheet complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m² D.S.R. Item No. 12.1.3 |
| 12 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.8.45 |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). In Foundation B.C.D 5.3.1.2 |
| 14 | Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. B.C.D 5.2.14 |
| 15 | Providing 12 mm thick cement plaster (1:6) with clean Also 1.50 mm Punning coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l.B.C.D 5.7.3 + 5.7.11 |
| 16 | Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and finally dressed with earth obtained from excavation of foundation trenches with a lead of 50m and lift of 1.5m all complete as per building specification and direction of E/l.B.C.D 5.1.7 |
| 17 | Providing M.S. Flate as per I.S. 226 size in 75 x 40 mm (Gr- A) B.C.D. M- 195 |
| 18 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. D.S.R.16.71 |
| 19 | Labor for fabrication , eracting and fixing in position sturture steel work in R.S. Joist ,channel ,angle, tee, flate ,plate all complete job as per specification and direction of E/I.B.C.D. 5.5.28 |
| 20 | Providing wole for Fancing Apart M- 215 |
| 21 | Providing two coat of painting with ready mixed paintover primer coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt, scales, grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D. 5.8.41 +5.8.43 |
| 22 | Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20 x 6 mm M.S flats or 16mm M.S square bars fitted on 25 x 5 x 6mm M.S angle frame of size 60 x 60 x 6mm -do- -do- all complete job as per specification and direction of E/I. B.C.D. 5.5.30 |
| 23 | Providing two coats of painting with ready mixed paint over a coat of primer of red lead paint over steel surface -do- -do- all complete job.B.C.D. 5.8.41+5.5.43 |
| 24 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. (Group-A) 1.1.1 |
| 25 | Wiring for light/ power plug with 2x4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 1.3.2 |
| 26 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2x2.5 sq.mm + 1x2.5 sq.mm earth wire 1.7.2 |
| 27 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2x10 sq.mm + 1x10 sq.mm earth wire 1.7.5 |
| 28 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.1.33 |
| 29 | Supplying and fixing brass batten/ angle holder including connections etc. as required.1.34 |
| 30 | Providing 4 way SP & N MCB distribution board -do- -do- all complete as per specification and direction of E/I.2.8.7 |
| 31 | Supplying, fitting and fixing 48\\" dia sweep ceiling fan with regulator all complete as per approved design, drawing and electrical specification and direction of E/I.M-772 |
| 32 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.1.44 |
| 33 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. (63 Amp TP&N) 2.1.3 |
| 34 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (Without charcoal/coke and salt) as required.3.2 |
| 35 | Supplying 9 watt L.E.D. bulb.M-855 |
| 36 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required 210 mm x 206 mm x 48 mm deep 1.22.9 |
| 37 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.126 mm x 277 mm x 61 mm deep 1.22.7 |
| 38 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm x 75 mm x 50 mm deep 1.22.1 |
| 39 | Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.D.W. & S. S.O.R. Item No. 3.2.5 |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.D.S.R. Item No. 18.9 15mm dia |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.D.S.R. Item No. 18.9 32 mm dia |
| 42 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes. D.S.R. Item No. 12.41.2 |
| 43 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.D.S.R. Item No. 12.42 Single tee with door |
| 44 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.D.S.R. Item No. 12.42 Bend 87.5° |
| 45 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.D.S.R. Item No. 12.42 Shoe (Plain) |
| 46 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt. not less than 350 grams) with extra socket all complete as per specification and direction of E/I. D.W. & S. S.O.R. Item No. 3.1.5.1 |
| 47 | Providing and fixing brass / C.I. stop cock of approved quality all complete as per specification and direction of E/I.D.W. & S. S.O.R. Item No. 3.1.6 15mm dia Brass Stop Cock |
| 48 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.D.S.R. Item No. 18.48 |
| 49 | carriage of MaterialCement |
| 50 | Stone Chips |
| 51 | Bricks |
| 52 | Steel |
| 53 | GST 18% |
| 54 | Labour Cess 1% Please Enable Macros to View BoQ information |
