|
| 1 | Dismantling, clearing away and carefully stacking materials useful for Brick / stone masonry in lime mortar walls under 3m high etc.Complete |
| 2 | Supplying and filling in foundation, basement, etc with filling Crushed Stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 3 | Brick work in Cement Mortar1:5(One Cement and five M-sand ) using new II class ground moulded chamber burnt bricks of size 9\\" x 4-3/8\\" x 2-3/4\\" in including neat finishing , curing etc., complete complying with standard specifiction.(Masonry projection wherever necessary for obtaining required elevation shall be done without any extra cost) |
| 4 | In Ground floor |
| 5 | In First floor |
| 6 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 7 | Cement Concrete 1:5:10 (One Cement, Five M-sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification. |
| 8 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 9 | Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 10 | Supplying and Fixing of Wood Polymer Composite (WPC) door with solid door frames extruded with size 75mmX50mm. The Inner core made of rigid WPC compound with minimum shore hardness of 55, and Buld Density 750Kg/cub.Mt. The frame shall be fixed to the wall using 10X10mm long MS screw throught the frame by using PVC fasteners. A minimum of 4nos screww to be provided for each vertical members,Door shutter of 25mm thick Wood Polymer Composite (WPC) single core Extruded Door Shutter, with one side digital printing of Specified Design which is approved by engineer-In-Charge. Both side of the shutter shall have rough sugar texture finish, aminated with UV oil. The solid WPC board shall have minimum shore hardness of 55 and Bulk density 550Kg/Cub.Mt moulding the thickness remains 25mm(+/-1mm) etc complete as per the direction of the departmental officers. |
| 11 | Supplying and fixing the pipe and fixing with new of M.S square of size 50 mm dia for purlin including labour charge for cutting bending and welding the tube on the truss in proper alignment and hire charges for welding machine etc., complete |
| 12 | Supplying and fixing with new of M,S Square tube of size 40x40mm for purlin including labour charge for cutting bending and welding the tube on the truss in proper alignment and hire charges for welding machine etc., complete |
| 13 | Supplying and fixing by drilling holes and not by puching for Roofing with pre painted Galvalum sheet of 0.47mm thick of best approved quality with required size with curved shape and white ridge sheet with necessary bolts and nuts bitumen washers, including cutting the sheet to the required size found necessary during execution etc., Complete complying with standard specifications. [The sheet should be got approved by the Engineer incharge before use on works] |
| 14 | Providing barricading arrangements from road to building entrance for 2.10m height (inner barricade) by using Casurina poles 10-13 cm at 0.60m interval for vertical post and 8-10 cm dia casurina poles for horizontal members 0.45 intenal tied with coir and removing the same after the counting is over etc., complete., |
| 15 | Supplying and fixing in position of 19 mm thick first quality dencified plywood (IS 4990:2011) for shuttering the door, window, and ventilators including fixing with country wood reepers of size 50 x 25mm including cost of labour charges for fixing and removing the same after the completion of counting. |
| 16 | Supplying and fixing X type wooden Reeper of size 50mmx25mm, 5.50 m Length in front of strong room door for Protecting the strong room including cutting, nailing, etc complete as directed by the departmental officer. |
| 17 | Supplying and fixing in position of weld mesh enclosure in Counting Hall and Strong room entrance by using Square tube of size 50mmx50mmx4.5 for vertical support and 35mmx35mmx3.2 for Horizontal support at 0.90cm interval etc., including cost of materials, cutting, welding, primer, transportation, labour charges for fixing and removing the same after the counting is over. |
| 18 | Supplying and fixing of Gate with using weld mesh 7.5x2.5cm.10 gague, Square tube of size 35mmx35mmx3.2 for frame including cost of materials, cutting, welding, primer, transportation, labour charges for fixing and removing the same after the counting is over. |
| 19 | Hire Charges for fixing of Pipe with decorative ceiling panthal of size 20'x20' including the cost of transport, laying and removing the same after the counting is over. |
| 20 | for 3 Days |
| 21 | Hire charges for providing Back drop Height of 4' with covering cloth including cost of transport, laying and removing the same after the counting is over |
| 22 | for 3 Days |
| 23 | Hire Charges for fixing of Arabian panthal of size 20'x20' including the cost of transport, laying and removing the same after the counting is over |
| 24 | for 3 Days |
| 25 | Hire Charges for red carpat of Cost including transporatation charges, loading and unloading charges etc., complete. |
| 26 | For 3 Days |
| 27 | For 15 Days |
| 28 | Hire Charges for Stainless steel tables of size 1.80m x 0.45m for dining use. The Cost including transporatation charges, loading and unloading charges etc., complete. |
| 29 | For 3 Days |
| 30 | Hire Charges for wooden tableof size 1.20m x 0.60m for counting Staff and counting assistant in counting hall, and dining use. The Cost including transporatation charges, loading and unloading charges etc., complete. |
| 31 | For 3 Days |
| 32 | Hire Charges for Plastic chairs for counting Staff and counting assistant in counting hall, and dining use. The Cost including transporatation charges, loading and unloading charges etc., complete, complying with standard specification. |
| 33 | For 3 Days |
| 34 | For 15 Days |
| 35 | Supplying and fixing weld mesh closing for window using best quality of weld mesh of size 1''x1'' -10 gauge and using Country wood reepers 2''x1'' framed with weld mesh fixing on wall on including nails, cutting charges conveyance charges etc, compete. |
| 36 | Supplying and fixing in position of 19 mm thick first quality dencified plywood (IS 4990:2011) for framed with weld mesh fixing on wall on including nails, cutting charges conveyance charges etc, complete, complying with standard specification. |
| 37 | Supplying and fixing of 19mm thick plywood for Postal box including labours charges as directed by the departmental officers etc complete., complete, complying with standard specification. |
| 38 | Supplying of Pigeon box for VVPAT Counting including labours charges as directed by the departmental officers etc.complete, complying with standard specification. |
| 39 | Supplying and fixing Back Drop Board fixed with country wood frame of size (50 x 25mm) mm alround and in side country wood reepers of size (50 x 25mm) fixed with 0.60m Horizontal and vertical intervels, Display board front surface covered with 19mm thick plywood including cost of country wood frame Reeper and 18mm Plywood, conveyance charges, Labour chargers etc complete. |
| 40 | Engaging labour for loading and unloading chairs and tables available in college class rooms and Re-arranging the chairs and tables in the class rooms after counting is over and Chairs, tables arrangements in counting hall, shifting of EVM racks and Cleaning the floors after finishing counting etc., complete |
| 41 | Levelling the uneven surfaces by removing the heaps of earth etc., by plugging out the tree trunk with roots below the ground level and removing the bushes using JCB Machinery etc. complete complying with standard specications and as directed by the departmental officers. |
| 42 | Supplying and fixing inposition of PVC foam type name boards in all counting halls,Strong rooms, Store rooms and indiacton boards. The cost includes transportation charges, screws, drilling, and also removing the same after the counting is over. |
| 43 | Size 3'x2' |
| 44 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT |
| 45 | Removing and Refixing of aluminium fixed PLB partition in Counting Hall with Aluminium natural colour matt finish fixed partition partly with 12mm thick both side prelaminated MDF board and partly 5.50mm thick glass outer frame of the aluminium section of size 63.50x38x3 @1.55Kg/m. and aluminium section of 63.50x38x3mm@ 1.72kg/m for intermediate vertical & Horizontal (millions) section with necessary aluminium clips of size 79.15x17.27x1.50mm at 0.176Kg/m with necessary rubber beading L angle including dismantling and redoing masonry as concrete where necessary etc., complete. |
| 46 | Removing and refixing of aluminium door in Counting Hall with aluminium anodised partly top 1/2 5.50mm thick plain glazed 1/2 with 12mm thick both sides prelaminated board and frame made out of box section 101.60x44.45x3.18mm thick at 2.319 Kg/m door shutter made out of box section 47.10x44.45x2.50mm at 1.202 Kg./m for vertical style and top, lock rail sections of size 50x44.45x2.50mm at 1.292Kg/m and bottom section 100.40x44.45x2.50mm at 1.974 Kg./m using clips of size 17.15x17.27x1.5mm at 0.176Kg\m with necessary metal screws, rubber beading, strike plate type handle of size 100x30x1.60mm at 0.988Kg./m on both sides, tower bolts lock pivot arrangements and top 1/2 portion with 5.50mm thick plain glass and bottom 1/2 portion with both side prelaminated board (MDF) 12mm thick for panel portion with 1 No. Floor spring including cost of furniture fitting such as Pivot hinges , Tower bolt, lock door stopper and all materials labour power consumption required for fabrication drilling holes in RCC columns floor slabs, masonry walls where ever necessary with power drills to the required extent and make the same to original condition after fixing and as directed. |
| 47 | Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts or best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc.,in a complete form using coir and nails 1m run. |
| 48 | Providing G.I sheet barricarding arrangements in the back side of counting hall window using casurina vertical post 13cm to 15cm and 60cm below ground level 3.0m above ground level and horizontal casurina post 10cm to 13cm 3 tiers tied with coir rope and nails etc., and removing the same after the counting is over etc., complete. and as directered by the departmental officers. |
| 49 | Supplying and fixing of wooden dias or platform to height of 0.30m for stage fixed with country wood leg 100mm x 100mm x 300mm tired with country wood reeper 75 x 40mm and top covered with 18mm thick plywood with two steps etc., and removing the same after the counting is over etc., complete. as directed with departmental officers. |
| 50 | Supplying and fixing ladies frishking cubical of size 5' 0\\" x 5' 0\\" using 10 to 13 cm dia casurina props for vertical to a height of 2.10m from ground level and 3 tier horizontal ties using 8 to 10 cm casurina poles and the three sides and top are covered with 19mm thick plywood and one side with covered with screen cloth using good quality non transperant materials with necessary tools and plants including labour charges etc. complete. |
| 51 | Supplying and fixing of 19 mm thick plywood for Mobiles box framed with wooden reeper of size 50mm x25mm and fixed with vertical Casurina post 10 to 13 cm dia including labours charges as directed by the departmental officers etc complete. |
| 52 | Easing the existing over hanging doors and windows including nerewing frame its position and refixing the same after attending petty repair works including for wrough and putup in position fixing necessary furniture excluding cost of aurniture etc., complete complying with standard specification as directed by the departmental officers at site of work. |
| 53 | Repairing and refixing the existing Aluminium Anodised natural colour mat finish Three track sliding window in all floors with Aluminium sections of Outer Frame bottom [email protected] kg/m, Top & vertical 92.34x29.70x1.50 at 1.066 kg/m, Shutter vertical 39x20x1.50 at 0.493 kg/m,Top & Bottom 18x36.6x1.50 at 0.439 kg/m,Vertical locking arrangement 28.94x39x1.50at0.632 kg/m, the follwing sizes with necessary accessories such as rubber beadings, special hinges, lock, handle including supplying and fixing 4mm thick plain glass including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC colunm, slab, masonry walls wherever necessary with power drills to the required extent and make good to the original condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers.The aluminium sections are to be anodised with matt finish under electrically controlled in accordance with IS 1868 / 1962 for an average anodic film thickness 15 microns etc., complete. |
| 54 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed Interior (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 55 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting |
| 56 | Supplying and fixing in position Health faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works). |
| 57 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 58 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 59 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 60 | 110mm dia |
| 61 | 75mm dia |
| 62 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 63 | 110mm dia |
| 64 | PVC Elbow |
| 65 | PVC Bend |
| 66 | 75mm dia |
| 67 | PVC Elbow |
| 68 | PVC Bend |
| 69 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply above ground level. |
| 70 | 20mm dia |
| 71 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 72 | 20mm dia |
| 73 | Coupler |
| 74 | Elbow |
| 75 | Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 76 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 77 | Hire charges for curtains, doors, and windows and desired aesthetic. Curtains commonly use fabrics like cotton, polyester, linen, or velvet, while doors and windows often feature materials like wood, aluminum, UPVC, or glass, with specific hardware like hinges and locks also needing detailed specifications and as directed by the departmental officer. |
| 78 | For 3 Days |
| 79 | Supplying and fixing inposition of mosquitos mesh using stainless steel frame with stainless steel shutters and mosquitos net mesh planks the rate inclusive of cost of materials , labour charges and trasportation charges etc., complete and as directed by the departmental officers. |
| 80 | Providing Special barricading arrangements over Bituminous Road using Drilling Machine and casurina poles 13cm dia 15cm dia and 60cm below ground level and 1.50m above and fixing horizontal casurina poles 10cm dia 13cm dia in 5 ties and the lowest should be 0.45m above ground level and tied with new coir ropes provided in all places+C47 |
| 81 | Providing movable barricading of 3m length using 10 Cm to 13 Cm dia Casurina poles for verticals leg 3 nos Various a height 1.50m with Horizontal members 4 nos, as Cross bracings includings nailing with new coir ropes etc. Complete including transportion and placing inposition as directed by the departmental officers etc., complete. |
| 82 | Hire charges for Sofa in the function site as the direction of departmental officers including the hire charges and the Sofa will be removed after the function is over. etc complete. |
| 83 | For 5 Days |
| 84 | Hire charges for Cushion Chair in the function site as the direction of departmental officers including the hire charges and the VVIP Chair will be removed after the function is over. etc complete. |
| 85 | For 3 Days |
| 86 | Labour and hire charges for supplying, placing carving teapoy of best quality including loading, unloading, stacking placing and removing after the function is over including watch and ward charges. |
| 87 | For 3 Days |
| 88 | Hire charges for Watching tower using vertical post of 15cmx10cmx 5mm of Square tube on height of 7m and covered roof of MS Plate of 8mm thick 14 gauge and center stiffner of 5cmx5cm L angle over top of parapet allround covered using MS 5cmx5cm L angle and conveyance charges etc.,complete as per the standard specification Total weight of tower 863 kg |
| 89 | For 3 Days |
| 90 | GST at 18% Please Enable Macros to View BoQ information |
