Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Description/ Heading |
| 2 | Part A BUILDING PORTION |
| 3 | Carriage of material by Mechanical Transport including loading, unloading and stacking Lime, moorum, building rubbish, Earth Lead - 1 Km |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). |
| 9 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 11 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood |
| 15 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 12 mm thick |
| 16 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 18 mm thick |
| 17 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 18 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws |
| 19 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters With ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood |
| 20 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 12 mm thick |
| 21 | Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. |
| 22 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia |
| 23 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 24 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. |
| 25 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm |
| 26 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading |
| 27 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 28 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 100x58x1.90 mm |
| 29 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 75x47x1.70 mm |
| 30 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 50x37x1.50 mm |
| 31 | Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 50 mm |
| 32 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm |
| 33 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm |
| 34 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm |
| 35 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 36 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 37 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 38 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 39 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. |
| 40 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 41 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm |
| 42 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm |
| 43 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 44 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 45 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. |
| 46 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters |
| 47 | Providing and fixing aluminum U beading of required size to Pre-laminated/ flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge. |
| 48 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 49 | Providing and fixing ball bearing for rolling shutters. |
| 50 | Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area |
| 51 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 52 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 53 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 54 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
| 55 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 56 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 57 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 58 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 59 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 60 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 61 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 100 mm diameter |
| 62 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 63 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend |
| 64 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe |
| 65 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 66 | Providing and fixing flat pressed 3 layer medium density particleboard or graded particle board (Grade I) IS: 3087 marked, in ceilingwith necessary nails etc. complete (frame work to be paidseparately): 12 mm thick |
| 67 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 68 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 69 | Neat cement punning. |
| 70 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 71 | Colour washing such as green, blue or buff to give an even shade :New work (two or more coats) with a base coat of white washing with lime |
| 72 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work |
| 73 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 74 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 75 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 76 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. Door chowkhats |
| 77 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. Window chowkhats |
| 78 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. Clerestory window chowkhats |
| 79 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm |
| 80 | Float glass panes of thickness 5.5 mm |
| 81 | Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 4 mm |
| 82 | Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm |
| 83 | Renewal of old putty of glass panes (length) |
| 84 | White washing with lime to give an even shade : Old work (one or more coats) |
| 85 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 86 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 87 | Re-lettering with black Japan paint of approved brand and manufacture. |
| 88 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :specification. One or more coats on old work |
| 89 | Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 90 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 91 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 92 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 93 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 94 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 95 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 96 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 97 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 98 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm |
| 99 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 100 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid |
| 101 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 102 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm |
| 103 | Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250 mm |
| 104 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 105 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 106 | Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 107 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe |
| 108 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 3989 |
| 109 | Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS : 3989 |
| 110 | Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron S&S as per IS - 1729 |
| 111 | Providing and fixing terminal guard : 100 mm Sand cast iron S&S as per IS - 1729 |
| 112 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand Cast Iron S&S as per IS: 1729 |
| 113 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms |
| 114 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms |
| 115 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 116 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 117 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter |
| 118 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter |
| 119 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 120 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 121 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness |
| 122 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness |
| 123 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 124 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-incharge Powder coated minimum thickness 50 micron aluminium |
| 125 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 126 | Petty carpentary repair works such as repairing of cupboard, nails screw fixing hinges tightening of doors and windows shutter etc. as & when required as per instruction of EIC. |
| 127 | Labour rate for small petty water supply repair work such as fixing of washer in bib cock, stop cpck, adjusting of foot valves of cistern, fixing of water supply fitting such asGI nipple, socket, tee, plug, union, elbow etc. as and when required as per instruction of EIC. |
| 128 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even andsmooth complete. |
| 129 | Finishing walls with Premium Acrylic Smooth exterior paintwith Silicone additives of required shade: New work (Two ormore coats applied @ 1.43 ltr/10 sqm over and includingpriming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 130 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I |
| 131 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.\\" |
| 132 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 133 | Supply and pasting of high intensity retro reflective sheet of different colours and shades as per instruction of EIC High intensity retro reflective sheet as per IRC 67-2001 |
| 134 | Providing and pasting reflective self adhesive vinyl sticker letter/number/shapes cut on computer driven plotter, pre spaced, and placed onto a pre masked transfer tape and shall be made from 3M series 3400 engineer grade reflective sheeting. Design of letter/number/shape and colour shall be pre approved by engineer in charge |
| 135 | Removing and uprooting of unwanted vegetation grown over the drainage pipes, walls, chhajjas, balcony and similar location of building upto floor Vth level with all tools and plants required with safety precautions and making good the same with plaster including disposal of material/tree roots etc at the required place all complete as per instruction of EIC |
| 136 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. |
| 137 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm |
| 138 | Brickwork with non-modular non modular FALG bricks (FALG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc. complete in all respect.- in foundation and plinth level in :. In cement Mortar 1:6 ( 1 cement : 6 Coarse sand) |
| 139 | Brickwork with non-modular non modular FALG bricks (FALG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc. complete in all respect.-In superstructure above plinth level upto floor V level. In cement Mortar 1:6 ( 1 cement : 6 Coarse sand) |
| 140 | Half-Brickwork with non-modular non modular FALG bricks (FALG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc. complete in all respect.- in foundation and plinth level in :. In cement Mortar 1:4 ( 1 cement : 4 Coarse sand) |
| 141 | Half-Brickwork with non-modular non modular FALG bricks (FALG bricks) confirming to IS:12894, class designation -7.5 average compressive strength etc. complete in all respect.- in foundation and plinth level in :. In cement Mortar 1:4 ( 1 cement : 4 Coarse sand) |
| 142 | 25mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (12.50mm nominal size stone aggregates ) |
| 143 | Part B Water Supply |
| 144 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 145 | Providing and fixing bolts including nuts and washers complete. |
| 146 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 147 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 148 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia |
| 149 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia |
| 150 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL 15 mm dia nominal bore |
| 151 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL 20 mm dia nominal bore |
| 152 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL 25 mm dia nominal bore |
| 153 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore |
| 154 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore |
| 155 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore |
| 156 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 32 mm dia nominal bore |
| 157 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 40 mm dia nominal bore |
| 158 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore |
| 159 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore |
| 160 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 161 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore |
| 162 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 163 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore |
| 164 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore |
| 165 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
| 166 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore |
| 167 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore |
| 168 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore |
| 169 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 20 mm nominal bore |
| 170 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 25 mm nominal bore |
| 171 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 172 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
| 173 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 100 mm diameter pipe |
| 174 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 150 mm diameter pipe |
| 175 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 250 mm diameter pipe |
| 176 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead :300 mm diameter pipe |
| 177 | Supplying pig lead at site of work. |
| 178 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class I |
| 179 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter Class I |
| 180 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 250 mm diameter Class I |
| 181 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 300 mm diameter Class I |
| 182 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore |
| 183 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore |
| 184 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore |
| 185 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 32 mm nominal bore |
| 186 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 40 mm nominal bore |
| 187 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 50 mm nominal bore |
| 188 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank |
| 189 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 190 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 191 | Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 192 | Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 193 | Providing and fixing PTMT bib cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 gms |
| 194 | Providing and fixing PTMT, push cock of approved quality and colour 15 mm nominal bore, 98 mm long, weighing not less than 75 gms |
| 195 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 196 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms |
| 197 | Cleaning of residential OH Tank as per instruction of EIC (six times times in 2 years) |
| 198 | Providing and fixing of 15mm CP brass pillar tap |
| 199 | Fixing GI pipes complete with G.I. fittings including trenching and refilling etc external work 15 mm nominal bore |
| 200 | Fixing GI pipes complete with G.I. fittings including trenching and refilling etc external work 20 mm nominal bore |
| 201 | Fixing GI pipes complete with G.I. fittings including trenching and refilling etc external work 25 mm nominal bore |
| 202 | Fixing GI pipes complete with G.I. fittings including trenching and refilling etc external work 40 mm nominal bore |
| 203 | Fixing GI pipes complete with G.I. fittings including trenching and refilling etc external work 50 mm nominal bore |
| 204 | SUPPLY OF BIB COCK WASHER |
| 205 | Supply of GI socket 15mm dia |
| 206 | Supply of GI socket 20mm dia |
| 207 | Supply of GI socket 25mm dia |
| 208 | Supply of GI elbow 15mm dia |
| 209 | Supply of GI elbow 20mm dia |
| 210 | Supply of GI elbow 25mm dia |
| 211 | Supply of GI nipple 15mm dia |
| 212 | Supply of GI nipple 20mm dia |
| 213 | Supply of GI nipple 25mm dia |
| 214 | Supply of GI TEE 15mm dia |
| 215 | Supply of GI TEE 20mm dia |
| 216 | Supply of GI plug 15mm dia |
| 217 | Supply of GI plug 20mm dia |
| 218 | Supply of GI plug 25mm dia |
| 219 | Supply of GI plug 40mm dia |
| 220 | Supply of PVC water tank cover |
| 221 | Supply of float valve for L.L. cistren |
| 222 | Supply of syphone for L.L. cistren |
| 223 | Supply of syphone washer for cistren |
| 224 | Supply of handle and level for L.L. cistren |
| 225 | Supply of jumper washer |
| 226 | Supply of steel jali 100mm |
| 227 | Providing steel spindle with checknut 100mm dia |
| 228 | Providing steel spindle with checknut 150mm dia |
| 229 | Supply of gland packing |
| 230 | Supply of M. seal |
| 231 | Supply of rubber packing |
| 232 | Repairing of sluice valve spindle |
| 233 | Part C Horticulture works |
| 234 | Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid for separately). |
| 235 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, edge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide, lawn mover and brush cutter with fuel & other T & P material/ articles shall be provided by the department.) Play grounds / Public parks (1Mali for 2.00Acre). |
| 236 | Maintenance of potted plant Earthen pot in displayed at ground floor only in bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge (For Earthen pot 750 Nos) |
| 237 | Maintenance of potted plants Cement pots at ground floor in flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge (For of Cement pots 300 no) |
| 238 | Complete maintenance of trees (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department and other T & P material/articles shall be provided by the contractor) and as per direction of officer in charge. Trees for 1200 no (beyond 8 year Slow & beyond 6 Fast growing group) |
| 239 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 240 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm |
| 241 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Cosmos hybrid |
| 242 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Gaillardia Double |
| 243 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Kochia |
| 244 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Sunflower Dwarf |
| 245 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Zinnia hybrid |
| 246 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 247 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 248 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm |
| 249 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Dahlia double |
| 250 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Chrysanthemum double |
| 251 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Marigold French Hybrid dwarf |
| 252 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Marigold Inca hybrid |
| 253 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Pansy Hybrid |
| 254 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Salvia |
| 255 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Petunia hybrid |
| 256 | Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 257 | Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. |
| 258 | Providing and displaying of Araucaria cookie plant, having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in-charge. |
| 259 | Maintenance of Kitchen garden including preparation of beds manuring/ fumigation weeding hoewing watering planting of vegitable seeds including spraying of insecticide and pesticide and Harvesting. (Note:-Only Good Earth, Manure, Fertilizer, Insecticide & Pesticide will be provided by the Department and other T & P material/articles shall be provided by the contractor) and as per direction of officer in charge |
| 260 | Providing and displaying of Croton Challenger variety having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 261 | Providing and displaying of Croton baby golden variety having ht.30 cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 262 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 263 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 264 | Carriage of material by Mechanical Transport including loading, unloading and stacking Lime, moorum, building rubbish Lead - 1 Km |
| 265 | Providing round the clock security guard with gun for watch & ward of Government premises and its all belongings by deploying neatly dressed security guards in 8 hour's shift including necessary T&P like torch, lathi and uniform etc. complete, as per directions of Engineer-in-charge.(One job means 8 hour's duty). |
| 266 | Providing round the clock security guard without gun for watch & ward of Government premises and its all belongings by deploying neatly dressed security guards in 8 hour's shift including necessary T&P like torch, lathi and uniform etc. complete, as per directions of Engineer- in-charge. (One job means 8 hour's duty). |
| 267 | Supply of insectcides/ fungiside pesticide etc. DAP |
| 268 | Supply of insectcides/ fungiside pesticide etc. NPK |
| 269 | Supply of insectcides/ fungiside pesticide etc. Urea |
| 270 | Supply of insectcides/ fungiside pesticide etc. Bone meal |
| 271 | Supply of insectcides/ fungiside pesticide etc. Neem Cake |
| 272 | Supply of insectcides/ fungiside pesticide etc. Rose mixture |
| 273 | Supply of insectcides/ fungiside pesticide etc. melathyan |
| 274 | Supply of insectcides/ fungiside pesticide etc. Roger30% |
| 275 | Supply of good quality of earth pots 12\\" size |
| 276 | Supplying of different varieties of sapling and plants Cycus |
| 277 | Supplying of different varieties of sapling and plants china palm |
| 278 | Supplying of different varieties of sapling and plants fire ball |
| 279 | Supply of good quality of seeds of flower(ordinary) |
| 280 | Supply of good quality of seeds of flower(Hybrid) |
| 281 | Planting different varities of sampling plants including making earth & pits, mixing of earth & manure ( cost of earth & manure shall be paid separately) etc. all complete with tools & plants as per instruction of EIC. On ground |
| 282 | Planting different varities of sampling plants including making earth & pits, mixing of earth & manure ( cost of earth & manure shall be paid separately) etc. all complete with tools & plants as per instruction of EIC. In pots |
| 283 | Brooming & cleaning of all roads in colony and within the premises of service building and other places as required with all tools & tackels and stacking the garbage at specified place as per instruction of EIC. |
| 284 | Part D Sanitation and upkeeping |
| 285 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 286 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil |
| 287 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth |
| 288 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 289 | Carriage of material by Mechanical Transport including loading, unloading and stacking Lime, moorum, building rubbish Lead - 1 Km |
| 290 | Brooming & cleaning of all roads in colony and within the premises of service building and other places as required with all tools & tackels and stacking the garbage at specified place as per instruction of EIC. |
| 291 | Cleaning of toilet(Floor area upto 10Sqm) including cleaning of dado,skirting,WC pan(Indian type/western type),wash basin,urinals,glass shelves,mirror and other fittings,if any for D type or equivalent Qtrs.including any other wash basin outside the toilet by hand dusting and cleaning with soap solution acids,deodorants,phenyl etc.to make the toilt clean & hygienic all complete with tools,tackles & consumables as per instruction of EIC. (Once in a week) |
| 292 | Cleaning of toilet(Floor area upto 8Sqm) including cleaning of dado,skirting,WC pan(Indian type/western type),wash basin,urinals,glass shelves,mirror and other fittings,if any for \\"C\\" type or equivalent Qtrs.including any other wash basin outside the toilet by hand dusting and cleaning with soap solution acids,deodorants,phenyl etc.to make the toilt clean & hygienic all complete with tools,tackles & consumables as per instruction of EIC.(once in a week) |
| 293 | Cleaning of toilet including WC pan,wash basin,other fittings,if any for \\"B\\" & lower type Quarter by hand dusting and cleaning soap solution acids,deodorants,phenyl etc.to make the toilt clean & hygienic all complete with tools,tackles & consumables as per instruction of EIC.(Once in a week) |
| 294 | Cleaning of surface drain including disposal of muck/sludge through trolley or other arrangement to a specified place(in no case it shall be kept on drain banks) within a lead of 1Km complete with all tools & tackles as per instruction of EIC up to 300mm wide |
| 295 | Cleaning of surface drain including disposal of muck/sludge through trolley or other arrangement to a specified place(in no case it shall be kept on drain banks) within a lead of 1Km complete with all tools & tackles as per instruction of EIC above 300mm wide and up to 600mm wide |
| 296 | Cleaning of surface drain including disposal of muck/sludge through trolly or other arrangement to a specified place( in no case it shall be kept on drain banks ) within a lead of 1KM complete with all tools & tackles as per instruction of EIC Above 600mm wide |
| 297 | Collection of garbage from door to door and disposal of the same through trolley or other suitable arrangement to the specified place within lead of 1KM including sweeping of stair case(for 1st and 2nd floor) with all tools and tackles as per instruction of EIC.(Ground floor) |
| 298 | Collection of garbage from door to door and disposal of the same through trolley or other suitable arrangement to the specified place within lead of 1KM including sweeping of stair case(for 1st and 2nd floor) with all tools and tackles as per instruction of EIC.(First floor) |
| 299 | Collection of garbage from door to door and disposal of the same through trolley or other suitable arrangement to the specified place within lead of 1KM including sweeping of stair case(for 1st and 2nd floor) with all tools and tackles as per instruction of EIC.(Second floor) |
| 300 | Disposal of dead animal including transportation to the specified place,making earth pit,disposal of dead animal into pit with adequate of salt,lime bleaching power etc. and refilling the pit with wearth all complete with tools,tackles and consumbales as per instruction of EIC.(Small animal) |
| 301 | Disposal of dead animal including transportation to the specified place,making earth pit,disposal of dead animal into pit with adequate of salt,lime bleaching power etc. and refilling the pit with wearth all complete with tools,tackles and consumbales as per instruction of EIC.(Big animal) |
| 302 | Cleaning of toilet with attached with hostel rooms,office chambers etc. including cleaning of floors,skirting & dado,WC pan(India/European type),wash basin,shelves,mirror and other fittings, if any,by hand dusting and cleaning with soap solution,acids,deodorants,phenyl etc. to make the toilet clean and hygienic and providing naphthalene balls in urinals complete with all tools,tackles & consumables as per instruction of EIC(for community & service building) (daliy two time in GM OFFICE/New GM OFFICE, dispensary, daliy in workers club, once in a week in all union office building) |
| 303 | Cleaning of general/common toilet including cleaning of WC pan (Indian/European type) wash basin,urinals,by hand dusting and cleaning with soap solution,acids,deodorants,phenyl etc. to make the toilet clean and hygienic and providing naphthalene balls in urinals complete with all tools,tackles & consumables as per instruction of EIC(for community & service building)(daliy two time in GM OFFICE/New GM OFFICE, dispensary, one time daliy in workers club, shopping centre, A type hostel, civil maintenance office) |
| 304 | Cleaning of Inspection chamber of all sizes and disposal of sludge etc. all specified place outside the colony with all leads including removal & replacing of top cover mending the damages of cover and chamber,if any etc. as per instrution of EIC. |
| 305 | Cleaning of chocked sewer line & sludge line of all dia meters including removal of earth.opening of joints,cleaning of pipe line,making joints leak proof etc. all complete including disposal of sludge materials outside the colony with all leads at specified place with tools 7 tackles as per instruction of EIC. |
| 306 | Cleaning of door shutter,window shutters including chowkhats,window grills,glass panes,cobwebs etc. of service/community buildings with necessary detergents,chemicla etc.complete as per instruction of EIC. |
| 307 | Cleaning of sludge line and traps(Kitchen & toilets) of all diameters at different floors including opening of joints,cleaning of pipe line and again jointing & flushing with fresh water all complete with tools and tackles as per instruction of EIC. |
| 308 | Cleaning ,mopping & washing of floor of public buildings other places neatly with dteregents,bleaching power etc. all complete with tools,tackles and consumable to make the floor clean & hygieenic as per instruction of EIC. |
| 309 | Cleaning of all types of roof including removal of dry leaves, weeding and cleaning drain holes, brooming etc all complete with tools & tackles and stacking the garbage at specified places as per instruction of EIC. |
| 310 | Cleaning of ground water reservoir including scrapping of stains and muck from wall & floor removal of muck from reservoir, disinfecting the tanks with by lime/bleaching powder etc, and washing the tank with fresh water, writing the cleaning date with paint on the outer surface of the tank all complete as per instruction of EIC. |
| 311 | Part E Valve Operation |
| 312 | Operation of sluice valve in temporary colony at Khadia Project by engaging 7 unskilled (Sluice valve operation )and 1 skilled labour (Fitter /supervisor) with tool&Tacles. Deduction will be mde at the double rate in case less / none deployment of labour on pro rata basis |
| 313 | Part F Pest Control |
| 314 | Anti Adult Measures-General disinfection/pest control with a new generation odourless, colourless insecticides which should be safe for human being and effective for all kind of household insects like mosquitos, housefliesetc.Using residual spray of Deltamethrin in 2.5% SC fLOW (K Othrine or approved equivalent).Insecticides should be sprayed uniformly over the surfaces of wall,ceiling,etc.Frequency -once in 3 month. (Area 328504.28X4=1314017.12) |
| 315 | Anti Adult Measures-General disinfection/pest control with a new generation odourless,colourless insecticides which should be safe for human being and effective for all kind of household insects like mosquitos,housefliesetc.Using residual spray of Cyfluthrin 5% EW(Solfac EW OSO or approved equivalent).Insecticides should be sprayed uniformly over the surfaces of wall,ceiling,etc.Frequency -once in 3 month (Area 328504.28X4=1314017.12) |
| 316 | Thermal fogging-Using insecticide Deltamethrin 1.25% ULV (Kingfog or approved equivalent) mixed with diesel into the ratio pf 1:199 for outdoor operation of colony etc. Frequency-Monthly.(156500 X 24 = 3756000) |
| 317 | Anti Larvae Measures-Treatment by using Diflubenzuron 25% WP(Bi-Larv or approved equivalent) solution should be spread as per instructionofEIC.Frequency-Weekly (18800 X 104 week = 1955200) |
| 318 | Part G Manpower for management of comprehensive maintenance |
| 319 | Facility Manager for heading the entire facility team of Office and Residential Complex and Single point of contact & overall in charge of FM On-site Operations and reporting to engineer-incharge or his representative. (30 days) |
| 320 | Asst. Facility Manager (Technical) for supporting Critical Services Operations & reporting to Facility Manager. (30 days), (3 nos. A.F.M.) |
| 321 | E & M PART |
| 322 | Complete overhauling of ceiling fans andexhaust fans (all work with materials |
| 323 | Complete rewinding of ceiling fans motor (allwork with materials) |
| 324 | Complete rewinding of different type exhaustfan (all work with materials) |
| 325 | Supply of heavy duty ceiling fan clamp withrubbers bush |
| 326 | Supply of different type of ceiling fan and exhaust fan bearing such as 6201, 6202, 6203 asrequired. |
| 327 | Supply of different type of ceiling fan andexhaust fan capacitors as required. |
| 328 | Supply of different type of exhaust fan blade asrequired.(300mm) |
| 329 | Supply of different type of exhaust fans frame asrequired.(300mm) |
| 330 | Supply of plastic board complete in respect for fitment size 8”X10”X2”(with cutting of 04 switch,04 socket and 01 regulator) |
| 331 | Supply of wooden board with sun mica top size 7”X4”X2”. |
| 332 | Supply of plastic board complete in respect for fitment size 4”X4”X2”(with cutting of 01 switch and 01 socket) |
| 333 | Supply of sun mica sheet top of size 8”X10” |
| 334 | Supply of sun mica sheet top of size 10”X12” |
| 335 | Supply of sun mica sheet top of size 8”X6” |
| 336 | Supply of sun mica sheet top of size 7”X4” |
| 337 | Supply of sun mica sheet top of size 9”X7” |
| 338 | Supply of sun mica sheet top of size 4”X4” |
| 339 | Supply of sun mica sheet top of size 5”X5” |
| 340 | Supply of 5/6A Modular switch |
| 341 | Supply of 5/6A Modular socket |
| 342 | Supply of 15/16A Modular switch and socket |
| 343 | Supply of 20mm casing capping of standard make ISI mark ( 2.00 mtr long each) |
| 344 | Supply of casing capping 1.5”of standard makeISI mark ( 2.00 mtr long each) |
| 345 | Supply of different size of PVC conduit pipe 1\\", (3 mtr long each) |
| 346 | Supply of different size of PVC conduit pipe 0.5\\", (3 mtr long each) |
| 347 | Supply of different type steel Nails as required. |
| 348 | Supply of different type steel screw as required.(1000 piece per packet) |
| 349 | Supply of different type of fastner (size 8mm/10mm) |
| 350 | Supply of different type of Kaju clip 1\\" as required (50 piece in one packet) |
| 351 | Supply of electrical PVC Tape (01 roll=10mtr) |
| 352 | Supply of copper flexible wire 23/76 |
| 353 | Fixing of electrical consumable items in residential and non-residential buildings in Khadia Area by engaging 11 man power consisting of 05nos. skilled ( Electrician) 5nos. un skilled ( Helper) and 01Nos. Asstistant facility manager(Electrical supervisor) per dayfor 90 days to attend the daily complaints. |
| 354 | DISMANTLING AND STACKING OF |
| 355 | 13m long tubular/rail pole |
| 356 | Earth Wire size 7/14 SWG |
| 357 | ACSR wolf/equivalent conductor |
| 358 | 11KV Disc insulator with hardware |
| 359 | 11 KV grade pin insulator with pin |
| 360 | 22KV post insulator with hardware |
| 361 | Stay set with stay wire, stay clamp and stayinsulator |
| 362 | Dismantling and stacking of Lightning arrestor |
| 363 | Danger board with clamp, bracket and nut bolts |
| 364 | Steel material such as : MS channel bracket, angle, clamp,support,plate ,pipe nut and bolt etc. |
| 365 | ERECTION WORK |
| 366 | Survey pegging/jungle cleaning including tree branch cutting and removing it ouside away from OHL for taking alignment of overhead line and its maintenance. |
| 367 | Erection of steel tubular pole,rail pole exceeding 11m but not exceeding 16m in brick blast/local hard stone with concreting of cement, mine gravels. |
| 368 | Excavation for stay pit & refilling in all kind of soil including soft rock. |
| 369 | Concreting of stay pit with cement, mine gravels and local sand in the ratio 1:4:8 |
| 370 | Erection of 11KV grade disc insulator withhardware |
| 371 | Concreting for old pole/stay including muffing with cement,mine gravels and local sand in 125 nos polws having muff size Dia 30cm height 75 cm |
| 372 | Erection of 11KV grade pin insulator with pin |
| 373 | Erection of 22KV post insulator with hardwareand fixing arrangement |
| 374 | Erection of stay set complete including binding, tensioning with 7/10 SWG stay wire and stay insulator with back clamp on pole |
| 375 | Laying ,stringing,tensioning of ACSR wolf orequivalent conductor. |
| 376 | Laying,stringing and tensioning of 7/14 SWG GI earth wire |
| 377 | Fabrication of steel material such as: MS channel bracket,angle clamp,support plate atc.(Steel material,welding rod,Gas are departmently provided and other things such as welding m/c, cutting set etc are provided bycontractor) |
| 378 | Erection of steel material such as: MS channel bracket, angle, clamp , support plate, pipe nut &bolt etc. |
| 379 | Installation/fixing of lighting arrestor completewith earthing strip etc. |
| 380 | Providing guarding on the line including fixingof brackets as per requirement. |
| 381 | Opening the jumper and rejumpering (Three noin one set) |
| 382 | Erection of danger boards with bracket andfasteners on required height of HT |
| 383 | Installation/fixing of anticlimbing device orbarbed wire by wounding on required height on |
| 384 | Painting of poles and brackets (HT and LT streetlight ) with supply of paint (one coat primer and two coat aluminium paint) |
| 385 | Repairing of poles (angle cutting and welding in the base of poles for strengthening) |
| 386 | SUPPLY PART |
| 387 | MS bolt nut washer of various sizes5/8x2\\",5/8x4\\" long as required |
| 388 | GI Earth wire 7/14 SWG wire |
| 389 | Stay set 3/4\\"x6\\" long complete with accessoriesincluding stay wire |
| 390 | Tension type hardware for wolf conductor |
| 391 | Suspension type hardware for wolf conductor |
| 392 | GI wire, 8 SWG for guarding |
| 393 | Supply of barbded wire |
| 394 | Running maintenance of lighting system(All work included) as per the instruction of EIC. With the help of 1 no. skilled ( Electrician) and 02 nos. unskilled (helper)) |
| 395 | D. AC and water cooler maintenance |
| 396 | Rewinding of different type motor AC /water cooler with Replacement of bush /shaft etc. as per required |
| 397 | Replacement of capacitor,4mf+-5% 440 volt AC 50 HZ 20c TO 80c As per IS2993 make Phillips, Crompton capital or equivalent |
| 398 | Replacement of capacitor,45mf+-5% 440 volt AC 50 HZ 20c TO 80c As per IS2993 make Phillips, Crompton capital or equivalent |
| 399 | Replacement of water cooler fan blade suitable for different types. |
| 400 | Replacement of AC fan blade suitable for different types. |
| 401 | Control relay suitable for split AC having 2 No & 2NC and 220 volt holding coil |
| 402 | Filter with strainer, artichoke for different types of window/split AC. |
| 403 | capillary for different types of window/split AC |
| 404 | PCB 1.5 Tones Invertor AC Indoor |
| 405 | PCB 2 Tones Invertor AC Indoor |
| 406 | PCB 1.5 Tones Invertor AC Outdoor |
| 407 | PCB 2 Tones Invertor AC Outdoor |
| 408 | AC Blower Indoor 1.5 Tones |
| 409 | AC Blower Indoor 2 Tones |
| 410 | AC Indoor Motor 1.5 Tones |
| 411 | AC Indoor Motor 2 Tones |
| 412 | DC Outdoor Fan Motor 1.5 Tones |
| 413 | DC Outdoor Fan Motor 2 Tones |
| 414 | Split AC 1.5 Tones/2 Tones Display |
| 415 | Condensor coil 1.5 Tones copper Split AC |
| 416 | Condensor coil 2 Tones copper Split AC |
| 417 | Refilling R410/R32 gases |
| 418 | Refilling of R22 gas |
| 419 | Different type of screw suitable for fixing in equipment |
| 420 | PVC Pipe ½” dia . |
| 421 | Inverter AC 1.5Tones compressor |
| 422 | Inverter AC 2Tones compressor |
| 423 | Rotary AC 1.5Tones compressor |
| 424 | Rotary AC 2Tones compressor |
| 425 | Remote 1.5 Tones/ 2 Tones Non Invertor |
| 426 | Remote 1.5 Tones/ 2 Tones Invertor |
| 427 | Watercooler Fan motor |
| 428 | Watercooler Compressor |
| 429 | Copper pipe 1/4,3/8 and 5/8 |
| 430 | Insulation cover 1/4,3/8 and 5/8 |
| 431 | Day to day maintenance of 162 nos. window/split AC ( 1.5 Ton/2ton) with the help of One Skilled and One Unskilled labour |
| 432 | E. Underground cable maintenance work |
| 433 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. a.Upto 35 sq. mm |
| 434 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. b.Above 35 sq. mm and upto 95 sq. mm |
| 435 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. c.Above 95 sq. mm and upto 185 sq. mm |
| 436 | F. General substation maintenance work |
| 437 | Maintenance of 09 nos Colony Substation with the help of 01 skilled and 01 semiskilled 01 unskilled manpower. |
| 438 | Providing of CMM Type TSF fuse 250A(For LT panel board) |
| 439 | Providing of LT Fuse base with carrier,415V,250A |
| 440 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
