Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation in all kinds of soil including moorum, stoney earth, gravel etc. excepting all kinds of rock & boulders exceeding 0.014cum in volume for dam base stripping, cut-off trenches, outfall drains and stripping in borrow areas including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 1.5m initial lift as per the direction of Engineer-in-charge including stacking of useful materials as per direction of the Engineer-In-charge. |
| 2 | Filling the foundation and plinth with excavated materials including well watered and rammed etc. including cost of conveyance, labour cess of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts including dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge. |
| 3 | Supplying and laying sand of approved quality from approved quarry free from any deleterious materials on compacted surfaces of foundation plinth, inside of room and other places wherever required to proper thickness with surface dressing including all cost, conveyance, cess and taxes of all materials to the site of work with all labour and T&P required etc. finished with all leads, lifts, delifts etc. complete as per the specification and direction of the Engineer-in-Charge. |
| 4 | Providing cement concrete (1:3:6) using 40 mm and downgraded hard granite crusher broken metal from approved quarry of approved quality of uniform colour and texture and free from weathered skin and other deleterious materials and clean course sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing the concrete by concrete mixer or by manually and placing the same in form work to all height as per the drawing and compacting with concrete by vibrator or by manually to required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of concrete mixer and vibrator etc. complete & as per the specification and direction of the Engineer - in - Charge. |
| 5 | Providing R.C.C M-25 grade using 20 mm & downgraded size hard granite crusher broken chips of approved quality uniform colour and texture and free from weathered skin and other deleterious materials and clean course sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing the concrete by concrete mixer and hoisting & laying the concrete in form work to all height as per the drawing and compacting with concrete by vibrator to required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of concrete mixer and vibrator etc. complete & as per the specification and direction of the Engineer - in - Charge. (GROUND FLOOR) |
| 6 | Providing R.C.C M-25 grade using 20 mm & downgraded size hard granite crusher broken chips of approved quality uniform colour and texture and free from weathered skin and other deleterious materials and clean course sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing the concrete by concrete mixer and hoisting & laying the concrete in form work to all height as per the drawing and compacting with concrete by vibrator to required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of concrete mixer and vibrator etc. complete & as per the specification and direction of the Engineer - in - Charge. (1 ST FLOOR) |
| 7 | Providing R.C.C M-25 grade using 20 mm & downgraded size hard granite crusher broken chips of approved quality uniform colour and texture and free from weathered skin and other deleterious materials and clean course sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing the concrete by concrete mixer and hoisting & laying the concrete in form work to all height as per the drawing and compacting with concrete by vibrator to required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of concrete mixer and vibrator etc. complete & as per the specification and direction of the Engineer - in - Charge. (2ND FLOOR) |
| 8 | Providing & laying R.C.C work of M-20 grade with 20mm size hand broken hard granite hand broken metal including all cost, carriage, royalty of materials & all other taxes etc.complete as per specification & direction of the Engeer-In-Charge. |
| 9 | Supplying of uncoated HYSD steel reinforcement for RCC work of all diameters and sizes of approved quality as per design and tying the grills, welding and placing in position at all heights including cost of all lapping, approved quality of binding wire of 18 to 20 gauge including all cost, conveyance, cess and taxes of all materials to the site of work with all labour and T&P required etc. finished with all leads, lifts, delifts etc. complete as per the specification and direction of the Engineer-in-Charge. (GROUND FLOOR) |
| 10 | Supplying of uncoated HYSD steel reinforcement for RCC work of all diameters and sizes of approved quality as per design and tying the grills, welding and placing in position at all heights including cost of all lapping, approved quality of binding wire of 18 to 20 gauge including all cost, conveyance, cess and taxes of all materials to the site of work with all labour and T&P required etc. finished with all leads, lifts, delifts etc. complete as per the specification and direction of the Engineer-in-Charge. (1 ST FLOOR) |
| 11 | Supplying of uncoated HYSD steel reinforcement for RCC work of all diameters and sizes of approved quality as per design and tying the grills, welding and placing in position at all heights including cost of all lapping, approved quality of binding wire of 18 to 20 gauge including all cost, conveyance, cess and taxes of all materials to the site of work with all labour and T&P required etc. finished with all leads, lifts, delifts etc. complete as per the specification and direction of the Engineer-in-Charge. (2ND FLOOR) |
| 12 | Providing centering & shuttering to all permanently exposed surfaces of cement concrete with plywood/ wood shutters including supply of rigid tie, supports, false works & dismantling then after casting including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts, dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge R.C.C floor, roof slab, landing, balconies, projection, sun shades & chajjas.(UP TO 4.3M HEIGHT)(GROUND FLOOR) |
| 13 | Providing centering & shuttering to all permanently exposed surfaces of cement concrete with plywood/ wood shutters including supply of rigid tie, supports, false works & dismantling then after casting including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts, dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge R.C.C floor, roof slab, landing, balconies, projection, sun shades & chajjas.(UP TO 4.3M HEIGHT) (1ST FLOOR) |
| 14 | Providing centering & shuttering to all permanently exposed surfaces of cement concrete with plywood/ wood shutters including supply of rigid tie, supports, false works & dismantling then after casting including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts, dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge R.C.C floor, roof slab, landing, balconies, projection, sun shades & chajjas.(UP TO 4.3M HEIGHT) (2ND FLOOR) |
| 15 | Providing centering & shuttering to all permanently exposed surfaces of cement concrete with plywood/ wood shutters including supply of rigid tie, supports, false works & dismantling then after casting including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts, dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge R.C.C foundation, plnth band & footing, base of column mass concrete pre cast slabs etc. |
| 16 | Providing centering & shuttering to all permanently exposed surfaces of cement concrete with plywood/ wood shutters including supply of rigid tie, supports, false works & dismantling then after casting including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts, dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge R.C.C stairs & railing. (GROUND FLOOR) |
| 17 | Providing centering & shuttering to all permanently exposed surfaces of cement concrete with plywood/ wood shutters including supply of rigid tie, supports, false works & dismantling then after casting including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts, dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge R.C.C stairs & railing. (1ST FLOOR) |
| 18 | Providing centering & shuttering to all permanently exposed surfaces of cement concrete with plywood/ wood shutters including supply of rigid tie, supports, false works & dismantling then after casting including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts, dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge R.C.C beam, column, grider & bressmer, etc (GROUND FLOOR) |
| 19 | Providing centering & shuttering to all permanently exposed surfaces of cement concrete with plywood/ wood shutters including supply of rigid tie, supports, false works & dismantling then after casting including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts, dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge R.C.C beam, column, grider & bressmer, etc (1ST FLOOR) |
| 20 | Providing centering & shuttering to all permanently exposed surfaces of cement concrete with plywood/ wood shutters including supply of rigid tie, supports, false works & dismantling then after casting including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts, dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge R.C.C beam, column, grider & bressmer, etc (2ND FLOOR) |
| 21 | Providing centering & shuttering to all permanently exposed surfaces of cement concrete with plywood/ wood shutters including supply of rigid tie, supports, false works & dismantling then after casting including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts, dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge R.C.C lintel. (GROUND FLOOR) |
| 22 | Providing centering & shuttering to all permanently exposed surfaces of cement concrete with plywood/ wood shutters including supply of rigid tie, supports, false works & dismantling then after casting including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts, dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge R.C.C lintel. (1ST FLOOR) |
| 23 | Providing centering & shuttering to all permanently exposed surfaces of cement concrete with plywood/ wood shutters including supply of rigid tie, supports, false works & dismantling then after casting including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the surface smooth with all leads, lifts and delifts, dewatering if required etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge R.C.C lintel. (2ND FLOOR) |
| 24 | Providing brick masonary work with Fly Ash bricks of (25x12x8)cm size in (1:6) having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) with clean course sand free from all deleterious materials from approved quarry including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the outer surface smooth with all leads, lifts and delifts including sufficient curing the masonary to achive design strength etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge Foundation & Plinth |
| 25 | Providing brick masonary work with Fly Ash bricks of (25x12x8)cm size in (1:6) having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) with clean course sand free from all deleterious materials from approved quarry including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the outer surface smooth with all leads, lifts and delifts including sufficient curing the masonary to achive design strength etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge Super Structure (GROUND FLOOR) |
| 26 | Providing brick masonary work with Fly Ash bricks of (25x12x8)cm size in (1:6) having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) with clean course sand free from all deleterious materials from approved quarry including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the outer surface smooth with all leads, lifts and delifts including sufficient curing the masonary to achive design strength etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge Super Structure (1ST FLOOR) |
| 27 | Providing brick masonary work with Fly Ash bricks of (25x12x8)cm size in (1:6) having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) with clean course sand free from all deleterious materials from approved quarry including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the outer surface smooth with all leads, lifts and delifts including sufficient curing the masonary to achive design strength etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge Super Structure (2ND FLOOR) |
| 28 | Providing brick masonary work with Fly Ash bricks of (25x12x8)cm size in (1:4) having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) with clean course sand free from all deleterious materials from approved quarry including cost, conveyance, labour cess & taxes of all materials with all labour and T & P including finishing the outer surface smooth with all leads, lifts and delifts including sufficient curing the masonary to achive design strength etc. complete and as per the specification, design & drawing and as directed by the Engineer-in-charge |
| 29 | Honey comb masonry with 25cm ×12cm ×8cm size Kiln burnt bricks having crushing strength not less than 75 kg/cm2 in cement mortrar (1:4) and plastered with 16mm, thick cement mortar (1:6)Honey comb brick work in sub-structure |
| 30 | Providing & laying 10cm thick dry brick khoa 4cm size well watered & rammered to receive A.S flooring including all cost of materials, taxes, royalty, carraige, & all other taxes complete & as per specification & direction of the Engineer-In-Charge |
| 31 | Providing12mm thick cement plaster (1:6) for out side surface of brick masonary with clean fine sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing by mixer or by manually and plaster the same in all height as per the drawing and required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of all machinaries etc. complete & as per the specification and direction of the Engineer - in - Charge.(GROUND FLOOR) |
| 32 | Providing12mm thick cement plaster (1:6) for out side surface of brick masonary with clean fine sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing by mixer or by manually and plaster the same in all height as per the drawing and required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of all machinaries etc. complete & as per the specification and direction of the Engineer - in - Charge.(1ST FLOOR) |
| 33 | Providing12mm thick cement plaster (1:6) for out side surface of brick masonary with clean fine sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing by mixer or by manually and plaster the same in all height as per the drawing and required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of all machinaries etc. complete & as per the specification and direction of the Engineer - in - Charge.(2ND FLOOR) |
| 34 | Providing 16mm thick cement plaster (1:6) for inside surface of brick masonary with clean fine sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing by mixer or by manually and plaster the same in all height as per the drawing and required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of all machinaries etc. complete & as per the specification and direction of the Engineer - in - Charge.(GROUND FLOOR) |
| 35 | Providing 16mm thick cement plaster (1:6) for inside surface of brick masonary with clean fine sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing by mixer or by manually and plaster the same in all height as per the drawing and required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of all machinaries etc. complete & as per the specification and direction of the Engineer - in - Charge.(1ST FLOOR) |
| 36 | Providing 16mm thick cement plaster (1:6) for inside surface of brick masonary with clean fine sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing by mixer or by manually and plaster the same in all height as per the drawing and required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of all machinaries etc. complete & as per the specification and direction of the Engineer - in - Charge.(2ND FLOOR) |
| 37 | Providing 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping the concrete surface and applying slury treatment to receive the plaster with clean fine sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing by mixer or by manually and plaster the same in all height as per the drawing and required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of all machinaries etc. complete & as per the specification and direction of the Engineer - in - Charge.(GROUND FLOOR) |
| 38 | Providing 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping the concrete surface and applying slury treatment to receive the plaster with clean fine sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing by mixer or by manually and plaster the same in all height as per the drawing and required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of all machinaries etc. complete & as per the specification and direction of the Engineer - in - Charge.(1ST FLOOR) |
| 39 | Providing 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping the concrete surface and applying slury treatment to receive the plaster with clean fine sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing by mixer or by manually and plaster the same in all height as per the drawing and required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of all machinaries etc. complete & as per the specification and direction of the Engineer - in - Charge.(2ND FLOOR) |
| 40 | Providing 12mm thick cement plaster (1:4) for inside surface of brick masonary with clean fine sand free from all deleterious materials from approved quarry including loading & unloading at site and mixing by mixer or by manually and plaster the same in all height as per the drawing and required thickness and watering for curing with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, water etc. with all labour, T&P required with hire and running charges of all machinaries etc. complete & as per the specification and direction of the Engineer - in - Charge. |
| 41 | Suppling, fitting & fixing Fixing vertified tiles in floor of size 600mm X 600mm of approved making conforming to I.S : 13755 laid on 20mm thick cement mortar (1:4) & filling joints with white cement of approved quality including rubbing and polishing complete with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, etc. with all labour, T&P required with hire and running charges of all machinaries etc. complete & as per the specification and direction of the Engineer - in - Charge. (GROUND FLOOR) |
| 42 | Suppling, fitting & fixing Fixing vertified tiles in floor of size 600mm X 600mm of approved making conforming to I.S : 13755 laid on 20mm thick cement mortar (1:4) & filling joints with white cement of approved quality including rubbing and polishing complete with all leads lifts and delifts including cost, carriage, royalty, cess, taxes of all materials, etc. with all labour, T&P required with hire and running charges of all machinaries etc. complete & as per the specification and direction of the Engineer - in - Charge. (1st FLOOR) |
| 43 | Providing and fixing ceramic tiles in walls on 12mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost, carriage, royality,taxes of all materials with all labour and T&P required etc. complete and as per direction of the Engineer-in-Charge. (GROUND FLOOR) |
| 44 | Providing and fixing ceramic tiles in walls on 12mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost, carriage, royality,taxes of all materials with all labour and T&P required etc. complete and as per direction of the Engineer-in-Charge. (1ST FLOOR) |
| 45 | Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigmentsto to match theshadeof the tiles includingrubbing and polishing complete excluding cost of precast tiles.(GROUND FLOOR) |
| 46 | Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigmentsto to match theshadeof the tiles includingrubbing and polishing complete excluding cost of precast tiles.(1ST FLOOR) |
| 47 | Finishing walls with weather coat painting two coats of approved shade over a coat of primer to give an even shade with approved paint inlcuding cost, conveyance, royalty, taxes of all materials with all labour, T&P required etc. complete as per the direction of the Engineer-In-charge. (GROUND FLOOR) |
| 48 | Finishing walls with weather coat painting two coats of approved shade over a coat of primer to give an even shade with approved paint inlcuding cost, conveyance, royalty, taxes of all materials with all labour, T&P required etc. complete as per the direction of the Engineer-In-charge. (1ST FLOOR) |
| 49 | Finishing walls with weather coat painting two coats of approved shade over a coat of primer to give an even shade with approved paint inlcuding cost, conveyance, royalty, taxes of all materials with all labour, T&P required etc. complete as per the direction of the Engineer-In-charge. (2ND FLOOR) |
| 50 | Providing & Finishing Wall painting with two coat of plastic emulsion paints of approved shade & approved brand to give an even shade over a coat of primer including cost of scaffolding & staging charges and all cost, conveyance, cess and taxes of all materials to the site of work with all labour and T&P required etc. finished with all leads, lifts, delifts etc. complete as per the specification and direction of the Engineer-in-Charge.(GROUND FLOOR) |
| 51 | Providing & Finishing Wall painting with two coat of plastic emulsion paints of approved shade & approved brand to give an even shade over a coat of primer including cost of scaffolding & staging charges and all cost, conveyance, cess and taxes of all materials to the site of work with all labour and T&P required etc. finished with all leads, lifts, delifts etc. complete as per the specification and direction of the Engineer-in-Charge.(1ST FLOOR) |
| 52 | Providing & Finishing Wall painting with two coat of plastic emulsion paints of approved shade & approved brand to give an even shade over a coat of primer including cost of scaffolding & staging charges and all cost, conveyance, cess and taxes of all materials to the site of work with all labour and T&P required etc. finished with all leads, lifts, delifts etc. complete as per the specification and direction of the Engineer-in-Charge.(2ND FLOOR) |
| 53 | Providing and fixing ISI marked 32mm thick flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both face of shutters of approved design including cost of all door fittings and fixtures etc. complete as per direction of Engineer-incharge. .(Ground FLOOR) |
| 54 | Providing and fixing ISI marked 32mm thick flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both face of shutters of approved design including cost of all door fittings and fixtures etc. complete as per direction of Engineer-incharge. .(1St FLOOR) |
| 55 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. .(Ground FLOOR) |
| 56 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. .(1st FLOOR) |
| 57 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. .(Ground FLOOR) |
| 58 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. .(1st FLOOR) |
| 59 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 Mtr. Center to Center and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3rows in stair case as per approved design and specification, buffing, polishing etc including all cost, conveyance, cess and taxes of all materials to the site of work with all labour and T&P required etc. finished with all leads, lifts, delifts etc. complete as per the specification and direction of the Engineer-in-Charge. |
| 60 | M.S panneled door double leaved shutter with M.S frame over all size including frame 1980mm Heightx1070mm width made out of the following materials conformingto relevant ISS frame 30x30x5mm M.s angle shutter style Top & bottom rail 25x25x3mm M.S angle window pannel 1.00mm C.R sheet panel stiffener coveringwidth of leaf 19x5mm M.S plate1 no hinges size 100 mm 2 nos each side Handle 19x5 mm M.S plate fabricated 2 nos ( inside) Tower bolt 2 nos bought out as per ISS Horizontal Grills 12mm M.S Round at 100 mm spacing ets completed as per the direction of EIC |
| 61 | Supplying, fitting and fixing of M.S. doors, windows and iron grill made out of (45x45x6)mm size angular frame with square bar M.S. flat for grills, 1.0mm CR Sheet with locking arrangement of approved design including all cost, conveyance, taxes etc. complete and as per direction of the Engineer-in-Charge. (1st FLOOR) |
| 62 | Supplying, fitting and fixing of M.S. doors, windows and iron grill made out of (45x45x6)mm size angular frame with square bar M.S. flat for grills, 1.0mm CR Sheet with locking arrangement of approved design including all cost, conveyance, taxes etc. complete and as per direction of the Engineer-in-Charge. (2nd FLOOR) |
| 63 | M.S varandha Grill made out of M.S angle at the periphery and M.S Flat in the inner design, conforming to IS 2062/2006 with hold fast made out of M.S Angle as used in periphery painted with Red oxide primer as per the design approved as per Engineer-in charge .(GROUND FLOOR) |
| 64 | M.S varandha Grill made out of M.S angle at the periphery and M.S Flat in the inner design, conforming to IS 2062/2006 with hold fast made out of M.S Angle as used in periphery painted with Red oxide primer as per the design approved as per Engineer-in charge .(1st FLOOR) |
| 65 | Labour for fitting and fixing of M.S doors & windows M.S grill etc as per approved design including cost conveyance taxes of all materials etc complete as per direction of EIC.(GROUND FLOOR) |
| 66 | Labour for fitting and fixing of M.S doors & windows M.S grill etc as per approved design including cost conveyance taxes of all materials etc complete as per direction of EIC.(1ST FLOOR) |
| 67 | Labour for fitting and fixing of M.S doors & windows M.S grill etc as per approved design including cost conveyance taxes of all materials etc complete as per direction of EIC.(2ND FLOOR) |
| 68 | Providing & Finishing of painting with two coat of enamel paints of approved shade & approved brand over a coat of red oxide primer in all Iron work including all cost, conveyance, cess and taxes of all materials to the site of work with all labour and T&P required etc. finished with all leads, lifts, delifts etc. complete as per the specification and direction of the Engineer-in-Charge.(GROUND FLOOR) |
| 69 | Providing & Finishing of painting with two coat of enamel paints of approved shade & approved brand over a coat of red oxide primer in all Iron work including all cost, conveyance, cess and taxes of all materials to the site of work with all labour and T&P required etc. finished with all leads, lifts, delifts etc. complete as per the specification and direction of the Engineer-in-Charge.(1ST FLOOR) |
| 70 | Providing & Finishing of painting with two coat of enamel paints of approved shade & approved brand over a coat of red oxide primer in all Iron work including all cost, conveyance, cess and taxes of all materials to the site of work with all labour and T&P required etc. finished with all leads, lifts, delifts etc. complete as per the specification and direction of the Engineer-in-Charge.(2ND FLOOR) |
| 71 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. (GROUP-A) |
| 72 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. ( GROUP-B) |
| 73 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. ( GROUP-C) |
| 74 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked with existing conduit Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make a) (2x1.5+1x1.5) sq.mm |
| 75 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked with existing conduit Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make a) (2x2.5+1x1.5) sq.mm |
| 76 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT)(2X4+1X1.5) |
| 77 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5) |
| 78 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit). |
| 79 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.(separate) (2 nos of Switch & 2 Nos of socket)(used as computer board also) |
| 80 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power like washing machine/Refrigerator/Geyser pointetc.) |
| 81 | Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg. in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials |
| 82 | S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge . |
| 83 | S/F of step type modular regulator of approved ISI Make |
| 84 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ Equivalent as per direction of Engg.-in-Charge. S/F of 12 way Double door MCB DB (Make- Anchor/Havells/Polycab/L&T) |
| 85 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ Equivalent as per direction of Engg.-in-Charge. S/F of 8 way Double door MCB DB (Make-Anchor/Havells Polycab/L&T) |
| 86 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ Equivalent as per direction of Engg.-in-Charge. S/F of 32A DP MCB \\"C\\" Series (Make- Legrand /Havelis/Schneider/ABB/ Seimens) |
| 87 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ Equivalent as per direction of Engg.-in-Charge. S/F of 5A to 32A 240V 'C' Series SP MCB (261) (for required location) |
| 88 | S/F of 63 amp ICDP Main Switch of approved ISI Maker Anchor Havells |
| 89 | S/IT/C Of Special Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg-in-Charge The entire earthing system should be Replacement Warranty will be 2 years |
| 90 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required as per direction of Engg-in-Charge |
| 91 | Supply & laying of 1x 25 mm2 sub main for Inverter wiring |
| 92 | S/F of Street light- 90W, 120 lm/w efficacy IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover (Make Bajaj/polycab/crompton/Eq) (Fixed at Parapet wall including with all accessories) |
| 93 | Supplying installation testing and commissioning of 9 MTR galvanized PU painted octagonal pole with 100W Street light 6A MCB Connector with all other wiring material Pole with top dia 70 MM Bottom dia 155 MM PCD- 250 MM thickness 3.1 mm with foundation boil and decorative bracket of 1 MTR long suitable for holding 1 nos 100W LED street light. The pole design must suitable for wind speed as per IS 875 IS 2062 grade E350/BS EN 10025 S355 Low Silicon (≤0.06%) High Tensile Steel Sheet as per IS 2062 / BS EN 10025 Or Equivalent Hot Dipped Galvanized, as per BS EN ISO 1461 Average coating should be 55 microns E250 Grade as per IS 2062 of Make(Bajaj / Valmont/RR ispat/Vakrangee) 100W LED street light with Epoxy powder coated pressure die-cast aluminium housing and LED driver cover with silicon gaskets provided for LEDs and control gear compartments LEDs Must have with non-yellowing secondary lens optics. The driver used is specially designed to have built-in surge voltage, open/short circuit protections External surge protection of 10 KV provided for additional safety Side entry mounting for 55 to 60mm OD pipe brackel Top maintenance. Access to driver is from the top. The fixture must have >= 12000 LM with peak power consuption of 100W Warranty on light fixture shall be of 5 years. The lighting fixture must deliver avg 25 Lux of 6 MTR roard Make -Wipro / Philips/ Havells/Bajaj/ LT/ Crompton/Panasonic (For Approach Road or Campus Lighting) |
| 94 | 1000 litre capacity Triple Layer white Cylinderical Vertical water storage tanks(ISI Marked) |
| 95 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete.i) 25 mm dia |
| 96 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. ii) 20 mm dia |
| 97 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. iii)15 mm dia |
| 98 | Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete. |
| 99 | Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately) |
| 100 | Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification |
| 101 | 580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan |
| 102 | Providing and fixing controlled flush, low level cistern made of vitreous china conforming to IS 774-2004 with all fittings complete. |
| 103 | I)10 litre (full flush) capacity |
| 104 | Providing and fixing controlled flush, low level cistern made of vitreous china conforming to IS 774-2004 with all fittings complete. II)C.P. flush bend. |
| 105 | Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification complete.15mm dia CP Brass Short Body Bib Cock |
| 106 | 15mm dia c.p. swan neck Pillar cock with spout |
| 107 | 15mm dia CP Bib Cock Elbow Action |
| 108 | 15mm dia c.p.long body bib cock |
| 109 | 15mm dia c.p.angular stop cock |
| 110 | 15mm dia c.p concealed stop cock |
| 111 | 15mm dia c.p. pillar cock |
| 112 | 15mm dia CP flange |
| 113 | 15 mm CP 2 in 1 Angle stop cock (Prayag). |
| 114 | Wall Mixture 2 in 1 with out Telephonic Shower |
| 115 | Fixing of Brass Ball Valve (Horizontal plunger type) conforming to IS 1703-1977 as per specification complete |
| 116 | Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 117 | Fixing pedestal for wash basin complete recessed at the back for the reception of pipes and fittings |
| 118 | Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification. |
| 119 | Fixing Frammed mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification. |
| 120 | Fixing wash kitchen sink conforming to IS 2556 : Part 5-1994 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 121 | Fixing C.P. waste. (32mm - Small) pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification |
| 122 | Fixing Chromium Plated brass waste of the following nominal diameter for wash basin and sink as per specification |
| 123 | Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification |
| 124 | Fixing C.P.revolving shower (bend type) with 15mm or 20mm inlet including polishing all complete as per specification. |
| 125 | Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. |
| 126 | Fixing standard sized Chromium Plated brass towel ring fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. |
| 127 | C.P.soap holder/disc. |
| 128 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type B including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipesi)75mm diameter |
| 129 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type B including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipesii)110mm diameter |
| 130 | 75mm dia P.V.C. SWR S/J with door |
| 131 | 110mm dia P.V.C. SWR S/J with door |
| 132 | 75mm dia P.V.C. SWR D/J with door |
| 133 | 110mm dia P.V.C. SWR D/J with door |
| 134 | 75mm dia PVC SWR Single Y with door |
| 135 | 110mm dia PVC SWR Single Y with door |
| 136 | 75 x 75 x 75mm dia PVC SWR Tee |
| 137 | 110 x 110 x 110mm dia PVC SWR Tee |
| 138 | 110mm diaP.V.C. SWR.pipe clip |
| 139 | 75mm diaP.V.C. SWR.pipe clip |
| 140 | 110 mm dia P.V.C. SWR Vent Cowl |
| 141 | 110mm dia P.V.C. SWR Gully trap Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
