|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | P/L of stone Solling (Dully hand packed) incl. watering dressing and ramming with all carriages loadinf unloading and stacking (Complete Job) |
| 3 | Providing and laying in position cement concrete of specified grade 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Brick work with FPS bricks of class designation 75 in foundation & plinth in cement mortar 1:6 (1 cement , 6 coarse sand) i/c extra for Brick work with FPS bricks of class designation 75 in superstructure (All work upto Level-V) |
| 8 | Providing and fixing of wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported KD Wood. |
| 9 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : A) Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | B) Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 12 | C) Edges of slabs and breaks in floors and walls.Under 20 cm wide. |
| 13 | D) Suspended floors, roofs, landings, balconies and access platforms |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 16 | Providing colour coated high rib color coated GS sheets fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I limpet washers file with white lead all complete job (upto a pitch of 60 degrees), excluding the cost of purlins, rafters and trusses. 0.50 mm thick all carriages of material involved & head load complete job. |
| 17 | 12 mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 18 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 19 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 20 | Providing and fixing glazed shutters for doors, windows and clerestory windows including 3.5 mm thick float glass panes including ISI marked M.S butt hinges bright finished or reqquired size with necessary screws. 30 mm KD wood |
| 21 | Providing and fixing panelled & glazed shutters for doors, windows and celestory windows including Panelling of Pre- laminated particle board with decorative lamination on both sides, Grade I, Type II IS: 12823 marked including ISI marked M.S pressed butt hinges bright finished or required size with necessary screws complete job. 30 mm KD wood. |
| 22 | Providing/Fixing of glass panes incl. beading, nails and cost of carriage complete |
| 23 | P/F of ISI marked ornamental aluminium (coated) hardware fittings i/c all fastenings completei) T Bolts 100mm |
| 24 | ii) T Bolts 150mm |
| 25 | iii) Handles 125mm |
| 26 | iv) Handles 150mm |
| 27 | v) 150 mm hook and eyes |
| 28 | vi) Lock |
| 29 | vii) L- Drops |
| 30 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 31 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 32 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 33 | Providing and fixing C.P sink mixer of approved make jaguar/hindware/cera incl. cutting and making good the walls wherever required |
| 34 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour or shade (Area of slab over 0.5 sqm). 16 mm |
| 35 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board, 610x510mm bowl depth 200mm |
| 36 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 37 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick |
| 38 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 39 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 40 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 41 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 42 | Engagement of JCB for removal of tree roots stones and levelling of Ground at site and work of similar nature as directed by EIC |
| 43 | Carriage of materials by mechanical Transport from source to site of work for an average lead of 30 Kma) Sand and Stone agg. |
| 44 | b) Bricks |
| 45 | Providing and fixing PVC conduits 25mm dia (Finolex or equivalent brand) |
| 46 | Providing and fixing Light junction blocks complete as directed at site |
| 47 | Providing and fixing fan junction block complete as directed at site |
| 48 | Septic and Soakage PIT incl. Fittings and Fixtures for Washroom/ Kitchen (Part B)Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 49 | P/L of stone Solling (Dully hand packed) incl. watering dressing and ramming with all carriages loadinf unloading and stacking (Complete Job) |
| 50 | Providing and laying in position cement concrete of specified grade 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 51 | Brick work with FPS bricks of class designation 75 in foundation & plinth in cement mortar 1:6 (1 cement , 6 coarse sand) i/c extra for Brick work with FPS bricks of class designation 75 in superstructure upto plinth level |
| 52 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 53 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platforms |
| 54 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 55 | Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone. Nallah |
| 56 | 12 mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 57 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate |
| 58 | Construction of brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3coarse sand) complete as per standard design Inside size 45x45 cm and 45 cm deep including cover with frame (light duty) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. COMPLETE JOB |
| 59 | Providing and fixing of RCC Man hole cover with frame of size 450mmx450mm of approved quality and make complete. |
| 60 | Carriage of materials by mechanical Transport from source to site of work for an average lead of 50 Kma) Sand and agg. |
| 61 | b) Bricks |
| 62 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 63 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 64 | Providing & Fixing C.P. wall mixer of approved make jaguar/hindware/cera including 6 cutting and making good the walls wherever required. |
| 65 | Providing & Fixing C.P. tubes of approved make 450mm to 600mm longh |
| 66 | Providing and fixing of soap case of standard quality and make. |
| 67 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 68 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality Jaguar/hindware/cera make conforming to IS: 8931 |
| 69 | Providing and fixing of cockrach type CP grating of standard quality and make 100mm |
| 70 | Providing and fixing angle value for all points of jaguar/Hindware/cera standard quality and make including all accessories complete job |
| 71 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 72 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall , 15 mm dia. nominal bore Medium |
| 73 | Providing and fixing P.V.C. pipe and pipe fittings of the following nominal dia to P.V.C. Soil Waste Ventilating pipes,i) P/F PVC Door Tee 100mm dia of approved make type B |
| 74 | ii) P/F PVC bend 100mın dia of approved make type B |
| 75 | iii) P/F PVC Collar 100mm dia of approved make type B |
| 76 | iv) P/F PVC bend 75mm dia of approved make type B |
| 77 | v) P/F PVC Collar 75mm dia of approved make type B |
| 78 | vi) P/F PVC pipe 100mm dia of approved make Type B |
| 79 | vii) P/F PVC pipe 75mm dia of approved make Type B |
| 80 | viii) P/F PVC pipe 40 mm dia of approved inake Type B |
| 81 | ix) P/F PVC cowel over vent pipe of approved quality type B |
| 82 | x) P/F PVC Reducer 100x75 mm of approved quality type B |
| 83 | xi) P/F Ms stays and clamps for PVC pipe. |
| 84 | xii) P/F PVC floor traps 100 min complete job |
| 85 | P/F gun metal ball valve of approved quality 25 mm nominal dia |
| 86 | ElectricWiring for lighting points/fan points/exhaust fan points/call bell points with 2x1.5 sq mm FRLS/HFFR PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch ,modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ SSK) including the cost of conduit. |
| 87 | Supply, Installation, Testing and Commissioning of 12W LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 100lm/w, average life 50000 hours, Operating temperature -10°C to +45°C.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India.The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). |
| 88 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch connections etc. as required.( Anchor roma plus/Legrand Mylinc /SSK/Schneider Zencelo /Crabtree athena make). |
| 89 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 No. 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections etc. as required.( Anchor roma plus/Legrand Mylinc /SSK/Schneider Zencelo /Crabtree athena make). |
| 90 | Wiring for AC/Power plug points (15/16A heating points) with 2x4 sq mm FRLS/HFFR PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for earthing, etc. as required.(Havells/ Polycab/ Anchor/ SSK/KEI/RR or equivalent make ) including the cost of conduit. |
| 91 | Wiring for 5-10A socket out lets for computer with 2X2.5 sq. mm FRLS/HFFR PVC insulated copper conductor (Havells/ Polycab/ Anchor/ SSK/KEI/RR or equivalent make ) as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit, alongwith 1 No. 2.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for earthing etc. as required including the cost of conduit. |
| 92 | Supplying and fixing of indicators on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent). |
| 93 | Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate as recquired. |
| 94 | Supply and fixing of 6 way (4+18), Double door surface/ recess mounting, Horizontal type,three pole and neutral, sheet steel, MCB distribution board ,415V, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. (Havells/Legrand/SSK/Schnider/ABB) |
| 95 | Supply, installation, testing and commissloning of 5-32A single pole rating 240/415V,10 KA \\"C\\" curve MCB of Legrand/ Havells/ L&T/ABB suitable for inductive load in the MCBdistribution board complete with necessary connections. |
| 96 | Supply, installation, testing and commissioning of 40A-32A DP rating 240/415V,10 KA \\"C\\" curve MCB of Legrand/ Havells/L&T/ABB suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 97 | Supply, installation, testing and commissioning of 63A DP rating 240/415V,10 KA \\"C\\" curve MCB of Legrand/ Havells/ L&T/ABB suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 98 | Supply, installation, testing and commissioning of 100A DP rating 240/415V,10 KA \\"C\\" curve MCB of Legrand/ Havells/ L&T/ABB suitable for inductive load inside PVC enclosure outside MCB distribution board complete with necessary connections. |
| 99 | Supply, installation, testing and commissioning of 100A 4Pole Connector inside PVC enclosure of Legrand/ Havells/ L&T/ABB complete with necessary connections. |
| 100 | Wiring for Circuit/Sub mains along with earth wire in FRLS/HFFR PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, including the cost of conduit. (Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent). 2x10 sq mm |
| 101 | 2x 2.5 sq mm + 1x 2.5 sq mm Lighting circuit |
| 102 | Supply, laying, connecting and commissioning of 10 sq mm 2 core XLPE/ PVCInsulated and steel armored 1.1 KV grade Aluminum LT cable from Main Panel to Sub Panel at F.Floor, incl. cost of required al. thimbles duly crimped. (Over head/ under ground). (Havells/Polycab/KEI) |
| 103 | Earthing with G.l. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 104 | Supplying and laying 6 SWG G.l. wire at 0.50 Meter below ground level for conductor earth electrode, including connection/ termination with Gl thimble etc. as required. Please Enable Macros to View BoQ information |
