|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed. |
| 2 | M&L for Non - skid coloued Ceramic tiles, light shade, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed Cm 1:6 complete all as specified and directed. |
| 3 | M&L Glazed ceramic tiles in vertical surface as in dado 450x350mm or 600X 300X 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and incl 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 4 | M & L for Vitrified coloured ceramic tiles any shade 8 to 10mm thick, square/ rectangular (with pattern and boarder work as required at site), area of tiles exceeding 0.42 Sqm and not exceeding 1.00 Sqm each tiles as in flooring over and incl 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge or GE. |
| 5 | Description all as specified in item No 4.00 as above light shade tiles but on vertical surface such as in skirting/dado etc over and incl backing coat of 10mm thick rendering CM (1:4) complete all as specified and directed. |
| 6 | Taking down shutter and refixing in same opening after easing and adjusting, area of shutter exc 1 sqm but not exc 2 sqm each complete all as spd |
| 7 | S&F 15mm dia bore water tubing, medium grade, galvanised with all fitting laid in trenches/wall including taking down old pipe complete all as specified and directed. |
| 8 | S&F in repairs15 MM brass CP Mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified and directed. |
| 9 | S&F in repairs15 MM CP brass sink Mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified and directed. |
| 10 | S&F in repair Wall mixture with CP Telephonic shower pipe fixed over wall surface as per manufacturets mannual and Square Over Head shower (200mmx200mm) including easy flex shower tube with hand shower 68mm dia round shape single flow (ABS body chrome plated with rubit cleaning system etc complete all as specifed and directed Make : JAQUAR SHFLR 5281N or Hindware equvalent. |
| 11 | S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white, complete all as specified and directed. |
| 12 | S&F in repair Plastic water closet seat, back, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 13 | S&F in repair 10ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 14 | S & F in repairs Vitreous china Rimless Bowl With Cistern For Extended Wall Hung WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Accessories Set, Size: 375x630x750 mm including connecetion to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. Continental Series CNS-WHT-363SPPZ and equivalent in makes as per approved make list and as approved by GE). |
| 15 | S&F PVC connection 15mm sizes with PTMT nuts of length 450 mm complete all as specified and directed. |
| 16 | S & F in repair Vitreous China wash basin with pedestal white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete. |
| 17 | S&F in repair vitreous china wash basin, white, flat back, size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 18 | Supply only waste fitting 32mm dia , CP for WHB with long screwed shunks and nuts complete all as spd and directed |
| 19 | S&F in repair PVC waste pipe 32mm dia 60 cm long suitable for WHB/Sink complete |
| 20 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thk sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed. |
| 21 | S&F in repair 125 mm size Brass chromium plated shower rose suitable for 15 mm bore pipe complete all as specified and directed. |
| 22 | S&F in repairs 15mm dia bib taps fancy type , CP cast copper alloy with crutch or butterfly handle screwed down , screwed for iron pipe or brass ferrule fancy type complete all as specified and directed. |
| 23 | S&F looking mirror size 600x450mm bevelled edges miror of selected quality glass mounted of 6mm thk AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers complete. |
| 24 | S&F in repair 15mm bore angle stop valve chromium plated brass with flange complete all as spd & directed |
| 25 | S&F in repair Toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as spd & directed |
| 26 | S&F CP health faucet with 1.00mtr long CP flexible pipe as per approved samplecomplete all as spd and directed |
| 27 | S&F in repair CP , tubular towel rail 60cm long fixed with and including CP brass screws and wooden /plastic cleats complete |
| 28 | S&F grating doom 100mm dia of PTMT complete. |
| 29 | S&F in repair viterous china white soap dish fixed to plugs with chromium plated brass screws in position complete all as specified complete. |
| 30 | Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water complete |
| 31 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed |
| 32 | M&L for two coats of oil emultion distemper on new plaster surfaces of wall over a coat of chalk whitening including prepration of surface complete. |
| 33 | Taking down chowkhats or frames with shutters (w/o taking off shutters from the frame) area not exc 1.5 Sqm each complete all as spd |
| 34 | Taking down chowkhats or frames with shutters (w/o taking off shutters from the frame) area exc 1.5 Sqm and not exc 4 Sqm each complete all as spd |
| 35 | Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed. |
| 36 | Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 112 x 52 mm & sash 42 x 86 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 6.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.20 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)(Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.) |
| 37 | S & F 8 mm thick Toughned glass fixed as in doors, partitions and similar work including cutting to shape, drilling holes required icluding frosted on one side etc complete all as specified and directed |
| 38 | Providing and fixing factory made UPVC any colour three track sliding type window area exc 2.00 Sqm but n exc 2.50 Sqm each made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber, Frame (118mm x 56mm), Glass Sash (60mm x 40mm) another mesh sash (60mm x 40mm), Glazing bead (35mm x 20mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2mmthick galvanised steel frame (26mm x 10mm) , sash (31mm x 27.5mm), T Profle (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasterners. Hardware handle made of zinc alloyed (any color powder coated), transmission gear made of mild steel with multi point locking system ) and 5mm thick glazing with selected quality toughened glass and Stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm and required accessories. |
| 39 | Description all as per item No. 38.00 above but area exc 1.00 Sqm but not exc 2.00 sqm each and -ditto- |
| 40 | S&F stainless steel (Grade 304) square/round bar as in window grills, design & pattern as approved by GE, complete all as specified and directed. |
| 41 | S&F Sheet glass, 4 mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including beading fixed nails complete all as specified and directed |
| 42 | S&F stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed |
| 43 | S&F Fiber Glass Reinforced Plastic (FRP) Door Frames of cross section 90mm x 45mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 44 | S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames complete all as specified and directed. |
| 45 | S&F stainless steel 100mm long butt Hinge, medium weight complete |
| 46 | S&F 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section and fixed all as spd and directed. |
| 47 | S&F Aluminium handles, 150mm size cast type anodised complete all as specified and directed |
| 48 | S&F Factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cum Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets. |
| 49 | S&F Factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 50 | S&F Continuous( piano) hinges(width of flaps 40mm when open , mild steel , bright finish or electrogalvanised |
| 51 | S&F Magnet ball catcher brass body with 8mm dia steel ball of approved qualities complete all as specified |
| 52 | S&F 150mm Brass handle, cast type, polished bright complete all as specified and directed |
| 53 | S&f of telescopic channels, rollers for smooth sliding of drawers 18\\"-22\\", complete all as specified and directed |
| 54 | S&F 75 mm size brass Cup board lock, 4 lever grade I of superior quality all as specified and directed. |
| 55 | Stainless steel Plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved |
| 56 | “Stainless steel Cutlary basket of size 370mm x 485mm x 100mm made of min 4mm dia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. ( Make: Godrej Cat part no 6132 or equivalent approved by Engr-in-Charge” |
| 57 | “Stainless steel thali basket of size 370mm x 485mm x 200mm made of min 4mm dia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. Make: Godrej Cat part No 6136 or equivalent approved by Engr-in-Charge. ” |
| 58 | Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mm dia stainless steel wire approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. Make: Godrej Cat part No 6121 or equivalent approved by Engr-in-Charge” |
| 59 | Stainless steel Plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved |
| 60 | S&F in repairs stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket ovre all size overall size 915mmx 460mm bowl size 410 mmx 330 mmx 160mm complete all as specified and directed. Make- Maharaja/Nirali/Prayag |
| 61 | S&F stainless steel kitchen plate rack size 750 x 900x250 mm deep made out of 1mm thick sheet including fitting arrangement complete.Make- Maharaja/Nirali/Prayag |
| 62 | S&F Prilaminated fush door shutter 35mm thick solid core construction with Block board and laminated plywood face panels, commercial type on both sides. complete all as specified and as directed. |
| 63 | S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats |
| 64 | M&L two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified. |
| 65 | M&L two coat of synthetic enamel paint (finishing coat) old wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified. |
| 66 | S&F 300mm long, stainless steel , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts and sliding bolts and fixed, complete all as specified. |
| 67 | M & L for complete removal of existing treatment including preparing of plastered or unplastered surfaces / concrete surface of wall etc including cracks/holes in surface filling with white putty and applying two coat of OBD over a coat of chalk whiting etc complete all as specified and directed. |
| 68 | M & L for preparation of old decorated concrete /plastered/un-plastered surfaces / concrete surface of ceiling etc including cracks/holes in surface filling with white putty and applying two coat of OBD over a coat of chalk whiting etc complete all as specified and directed. |
| 69 | M&L one coat of synthetic enamel paint (finishing coat) over one coat of primer to old steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified. |
| 70 | M&L RCC 1:1½:3 type A-1 (using 20 mm graded crushed stone aggregate) as in slab,roofs, landings, balconies, canopies, deck slabs and in shelves & similar worksincluding form wor complete all as specified and directed. |
| 71 | S&F TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for, hooking ends and binding with and including mild steel wire (annealed) 0.90 mm dia wire complete all as specified and directed. |
| 72 | M&L Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc. |
| 73 | M & L for Granite (of any type) work, 18-20 mm thick slab(table rubbed and polished) in cooking platforms,jambs, windows cills lift wall, skirtings, dado etc where ever required and likes over and incl cement mortar bedding of 20 mm thick in CM 1:6 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. |
| 74 | S & F in repairs stainless steel Curtain Rod 25 mm dia with holders fixed to wall including finials and bracket Knob etc in required size for doors and windows openning complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 75 | S & F in repairs stainless steel Curtain Rod 25 mm dia with holders fixed to wall including finials and bracket Knob etc in required size for doors and windows openning complete all as specified and as directed. Please Enable Macros to View BoQ information |
