|
| 1 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified |
| 2 | Dismantling structural steel work including doors,gates ,framed trusses etc complete all as specified & directed |
| 3 | M&L for Mild Steel Framed work such as grills, grating etc with of bar shouldered or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framework for water tank conforming to Fe-290 Gde-E-165 complete all as specified & directed |
| 4 | Dismantling timber scantling 40 sqcm & over in section in any position unframed work complete all as specified |
| 5 | S&F MS Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified |
| 6 | Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws as specified |
| 7 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 8 | Material & Labour for Plain Cement concrete type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, roof kerbs, chajjas, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, filling in pressed steel frame and the like finished fair and even incl necessary form work complete all as specified & directed. |
| 9 | Dismantling wall panelling and ceiling boards/ False ceiling board including snap grid etc (fibre pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets complete all as specified & as directed. |
| 10 | Providing and fixing GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595mmx595 mm, and 0.5 mm thick with 8mm drop; made of G I sheet having galvanizing of 100gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns(minimum), including factory painted after bendingtiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 11 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 12 | M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed |
| 13 | Taking down chowkhats with shutter without taking off shutters from the frames of door /windows /ventilator etc (area exc. 1.50 sqm but not exc. 4.00 sqm each) incl making good the disturbed surfaces complete all as specified & directed. |
| 14 | Taking down chowkhats with shutter without taking off shutters from the frames of door/windows/ventilator etc (area not exc. 1.50 sqm each) incl making good the disturbed surfaces complete all as specified & directed. |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L for joint free glazed coloured ceramic coloured tiles of 300mm x 600mm x 7mm thick on vertical surface of walls of (Class I) and laid in pattern as approved by GE set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, all as specified and directed by engr-in charge. |
| 17 | M&L for Mild Steel Framed work as in chowkhats, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting,purpose made butt hinges ,sliding door bolts and tower bolts or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeFe 410-W (GdeE- 250) quality A complete all as specified and directed |
| 18 | S&F flush door shutter 35mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed. |
| 19 | S&F Floor door stopper of aluminium alloy body and tongue,140mm anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 20 | S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed aluminium (extruded section body) complete all as specified and directed |
| 21 | S&F hat and coat hooks aluminium anodised 200 to 250 mm in width with minimum 6 nos of hooks complete all as specified and directed |
| 22 | S&F anodised aluminium frame for doors,windows,ventillators with one or more rebates including joining cleat for fixing etc including powder coating (min thickness of powder coating 50 micron) complete all as specified & directed |
| 23 | Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) ,minimum thickness of powder coating 50 microns complete all as specified |
| 24 | S & F 100mm size butt hinges stainless steel complete all as specified and as directed. |
| 25 | S & F 150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed |
| 26 | S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 27 | S & F 250 mm long aluminium alloy, anodised siding door bolts, with has[, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed |
| 28 | S & F stainless steel wire cloth 0.36mm normal dia of wire and average width a apparture 0.56 mm and fixed with tinned tacksor stainless steel wire staples as specified and directed. |
| 29 | S & F 4.8 mm thick sheet glass , tinted of any colour quality and glazed fixed in aluminium framework with necessary fittings and fixtures complete all as specified and directed |
| 30 | M & L 10-12 mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, on brick masonry or concrete surfaces finished even and smooth, including taking down of existing cement or cement lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed. |
| 31 | M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of 1mm birla white putty complete all as specified and directed. |
| 32 | M&L for preparation of newly plastered or unplastered wall surfaces and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified |
| 33 | Dismantling stone slab or tiles laid in any type of mortar complete all as specified and directed |
| 34 | M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 10 mm thick screed bed in CM 1:3 including rounding to edge of granite as per required complete all as specified and directed. |
| 35 | M & L for machine cut kota stone slab 18-20 mm thick as in flooring laid over and incl cement screed bed 20 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) and complete all as specified and directed. |
| 36 | Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement complete all as specified and as directed. |
| 37 | M&L Reinforced cement concrete type B1 1:1½:3 (using 20mm graded crushed stone aggregate) (nominal mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge |
| 38 | S&F mild steel TMT reinforcement bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 39 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-charge. |
| 40 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed |
| 41 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 42 | Demolition of plain cement concrete in ground floor and paving n.exc. 15 cm thick below or above ground level complete all as specified & directed. |
| 43 | Supply and fixing factory made prepolished chequred cement concrete coloured tiles 300mm x 300mm x 20 to 22 mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:6, complete all as specified & directed. |
| 44 | M&L 100mm thick PCC 1:4:8 type D-2 using (40mm graded aggregate) as in sub base of floor complete all as specified and directed. |
| 45 | S&F Factory made precast perforated heavy duty drain/ manhole covers including MS frame plate and including reinforcement as per IS 12592 : 2002 with size 1.00mtr x 0.50mtr x 75mm thickness complete all as specified and directed by Engineer-in-Charge. |
| 46 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in surface channels and drains finished even and smooth including use of necessary form work and finishing exposed surfaces even and smooth using cement slurry using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Material & Labour prepapration of new or previously untreated surfaces of wood or based materials of any description not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint coat complete all as spd and as directed. |
| 48 | M&L two coats of synthetic enamel paint over a coat of zinc chrome/red oxide primer including preparation of new or previously untreated steel surfaces over 10 cm in width or girth. |
| 49 | S&F 25 mm thick stainless steel decorative curtain rods including brackets fixed to walls to stainless steel screws complete all as specified and directed |
| 50 | Supply only end funnels/lattoo decorative type complete all as specified and directed |
| 51 | S&F 600 mm x 450 mm bevelled edge looking mirror of selected qualityglass mounted on 6 mm thick AC building board or commercial plywood and fixed with stainless steel screws and cup washers complete all as specified |
| 52 | S&F bevelled edge looking mirror 8mm thick of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed with stainless steel screws and cup washers complete all as specified |
| 53 | Removal of demolished material /Debris/Malba from site exc. 1.5Km upto 5 kms including loading, unloading and stacking at the destination complete all as specified and directed by Engineer-in-Charge. |
| 54 | Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches,Sockets, holders,ceiling roses,light fitting regulators etc (to be measured separately) and making good the disturbed surface all as directed. |
| 55 | M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked drawing in PVC concealed conduit and PVC conduit fitting including drawing FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box, frame of suitable size with modular sheet for fixing modular switches/sockets/fan regulator etc complete all as directed |
| 56 | One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push. |
| 57 | One socket outlet point 5 amps on the same board. |
| 58 | One socket outlet point 5 amps on the independent board. |
| 59 | Description all as per Srl Item No 55.00 here-in-before but with 4 sqmm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent point. |
| 60 | S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed. Make-Indoasian shynora/ Anchor Roma/ Legrand Avtear or equivalent. |
| 61 | S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed. Make-Indoasian shynora/ Anchor Roma/ Legrand Avtear or equivalent. |
| 62 | S&F Modular switch 16 Amp, 1 way, 1 module size complete all as directed. Make-Indoasian shynora/ Anchor Roma/ Legrand Avtear or equivalent. |
| 63 | S&F Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed.Make-Indoasian shynora/ Anchor Roma/ Legrand Avtear or equivalent. |
| 64 | S&F Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed. |
| 65 | Modular Step Fan regulator, 120/70 watts single / double module, fixed in repairs, complete all as specifed and as directed. Make-Indoasian shynora/ Anchor Roma/ Legrand Avtear or equivalent. |
| 66 | S & F surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 20 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 67 | Taking down ceiling fan any size sealing cable end, dismentling blades and deposit in MES store yard. complete all as specified and as directed. |
| 68 | S&F BLDC (Brushless Direct Current) Ceiling Fan ( energy efficient), 1400 mm with IR Remote controlled also suitable for regulator, opertaing voltage 220V, minimum air delivery 265 CMM class of insulation 'F' having full copper motor winding & ribbed 3 Nos A/M blades making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed.The fan shall have BEE 5 star rating and service value more than 7.1. Make-Havells/ Atomberg/ Crompton and Goldmedal. |
| 69 | M&L Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed. |
| 70 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and depositing the old U/s item to MES store yard. |
| 71 | Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately |
| 72 | S&F in replacement MCCB 3 Pole, 160 Amp with breaking capacity 16 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified. |
| 73 | S & F of MCB DB conforming to IP 43 - IK 09 with double door , SPN 12 way complete with din rail Neutral and earthing bar including taking out the old unserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed. |
| 74 | S&F of MCB SP, B Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed. |
| 75 | S&F of MCB SPN B Curve type, 10 KA,63 Amp, with over load and short circuit protection complete all as directed. |
| 76 | Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate, testing complete all as specified and as directed. |
| 77 | S & F in replacement of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed. |
| 78 | Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed. |
| 79 | S & F of replacement of Recess/Surface mounting 2' x 2' square flat panel ultra slim scoop LED light 36 W warm/cool white with driver/transformer etc suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection, complete all as specified and as directed. |
| 80 | Supply, laying and testing in replacement XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core. |
| 81 | Excavation in trenches in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surface for laying LT cable as specified and directed at site by Engineer-in-Charge. |
| 82 | Returning filling in soil including spreading, levelling, watering and well rammingin layers not exceeding 25 cm complete as specified and directed by the Engr-in-charge. |
| 83 | Removing exccavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point complete as specified and directed by the Engr-in-charge. |
| 84 | Supply and laying of DWC electrical pipe double wall corrugated of size 95x76 mm suitable for laying of electrical cable complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
