|
| 1 | Earth work in all kinds of soil within 50m. Initial lead & 1.5m. Initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. In depth & as per direction of the engineer-in-charge |
| 2 | Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per the direction of the Engineer-in-charge |
| 3 | Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 4 | C.C (1:2:4) using 12mm. Size BHGCB metal including the cost of all merials, labour carriage, royalty etc. complete |
| 5 | Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) in foundation and plinth |
| 6 | R.C.C. work of M20 having minimum compressive strength (working stress) 200kg./cm2 in 15cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12mm to 20mm size (1/2\\" to 3/4\\") crusher broken hard black granite chips of 20mm size (not to exceed 25%) of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary as per direction of the Engineer-in-charge including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. Column Base & Footing |
| 7 | R.C.C (M20) using 12mm.size BHGCB chips including all cost complete .Plinth Beam |
| 8 | R.C.C (M20) using 12mm.size BHGCB chips including all cost complete. Column, Beam |
| 9 | R.C.C (M20) using 12mm.size BHGCB chips including all cost complete. Lintel |
| 10 | R.C.C (M20) using 12mm.size BHGCB chips including all cost complete. Chaja |
| 11 | R.C.C (M20) using 12mm.size BHGCB chips including all cost complete. Roof &Kitchen |
| 12 | Septic Tank |
| 13 | Straightening, cutting, bending and binding, welding and jointing (if necessary) coiled/bent up M.S. rods/Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 guage binding wire required for R.C.C. work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wires will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S. rods or Tor steel linear measurements of rod for finished item of works. 5% wastage and lap length are included in the finished rate). |
| 14 | Rigid and smooth centering and shuttering for Drain work incl. cost of all materials. Slab |
| 15 | Man Hole Slab |
| 16 | Shoring & shuttering for the excavated trench up to a depth of 1.5m. from G.L including cost of all labour, T & P etc all complete . |
| 17 | First class Fly Ash brick work in cement mortar (1:6) in Super Structure with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge |
| 18 | First class Fly Ash brick work in cement mortar (1:4) in Super Structure with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 19 | 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm. Size on new work crusher broken hard Granite chips including cost of all labour, materials with all taxes, lead, T & P etc all complete |
| 20 | Supplying all materials (inclusive of cost, conveyance, taxes, loading and unloading) labour, T&P and providing 6 mm thick cement plaster (1:4) on RCC surface finished smooth including closed deep chiping and slury treatment as per specification drawing and direction of the Engineer-in-charge |
| 21 | Providing 12mm thick cement plaster(1:6) over brick work including cost, conveyance & royalty of all materials etc.(Out Side) |
| 22 | Providing 16mm thick cement plaster(1:6) over brick work including cost, conveyance & royalty of all materials etc. |
| 23 | 12mm. thick cement plaster (1:4) over brick work with Punning( Ground Floor) |
| 24 | Supplying fitting & fixing of M.S Grill Window & Door (Shutter) with M.S. Grill & Iron fittings fixed in proper position for window & shutter including all cost labour & materials T&P etc all complete as per direction of EIC. |
| 25 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar 1:4 and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer in charge.( For new work only) |
| 26 | Fixing Tiles to dados skirting & risers on 12mm. thick C.P (1:3) jointed with neat cement slurry without cost of precast tiles. |
| 27 | Fixing Tiles in floors or steps & landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with cost of precast tiles conveyance, royalty taxes of all materials, cost of all labour. T&P etc. completes direction of the Engineer-in-charge |
| 28 | Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with cost of precast tiles conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge (Digital Wall Tile) (300mm X 450mm) |
| 29 | Priming one coat with any approved wall primer including cost of all labour, materials T&P with taxes, transportation etc all complete (Wall primer) |
| 30 | Providing Distemper two coat with approved quality and shade over piastered surface with brush including cleaning the surface watering curing,cost of paint, taxes, labour charges T & p etc complete as per the direction of engineer in charge |
| 31 | Providing weather coat two coats with approved quality and shade over plastered surface with brush inclisang cleaning the surface watering curing cost of paint taxes, labour charges T & peti complete as per the direction of engineer in charge |
| 32 | Painting two coats of enamel paint over a coat of primer to iron works as per approved quality over a coat of primer sand papering polishing the surface including cost, conveyance taxes of all maternals cost of all labour T&P etc as required for the work complete in all floors as per direction of the Engineer-in-charge (Paint and primer will be supplied by the contractor) |
| 33 | Providing supplying of all labour with t&P for wall painting/Mural displaying logo for art of different image & drawaing in wall surface with weather coat over a coat of primer incluidng cleaning the exhisting surface with cost & conveyance of all materials etc |
| 34 | Supplying and filling with brick khoa 50mm. To 100mm.size including all cost complete |
| 35 | Disposal of surplus excavated materials by truck to low land area incl. loading and unloading etc. complete. |
| 36 | Providing & suing of seating arrangement of students & teachers including cost of transportation & terials etc. Junior Chair |
| 37 | Junior Table |
| 38 | Teaching Table |
| 39 | Chair |
| 40 | Supplying all materials, labour T&P fitting, fixing of PVC door with hinges,aldrops and locking arrangement etc all complete. |
| 41 | Fixing water closel, squatting pan (Indian type W.C pan) conforming to IS 2556: Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification |
| 42 | Supplying all materials labour T&P fitting fixing of laying of 110mm OD PVC pipes in trenches including Earthwork in Excavation etc all complete.(13492) |
| 43 | 110mm UPVC coupler |
| 44 | Fixing 100mm size P or S trap for water |
| 45 | 110mm dia SWR Cowel |
| 46 | 110mm dia. PVC SWR door bend |
| 47 | 110mm D/Jn with door |
| 48 | 110mm dia SWR Clamp |
| 49 | Supplying all materials labour T&P fitting fixing of wall or celling with PVC pipe with ASTMD 1785 (Schedule 80) of the following nominal size including cost and carriage etc all complete.(15 mm dia UPVC Pipe) |
| 50 | 20mm dia UPVC pipe |
| 51 | 25mm dia UPVC Pipe |
| 52 | Supplying all materials labour T&P fitting fixing of Brass or Gun Metal full way valve.( 25mm dia GMFWV) |
| 53 | 15mm dia CP short Bib Cock |
| 54 | 15mm dia CP Long body Bib Cock |
| 55 | CP pillar Cock |
| 56 | 15mm dia CP extension Piece-3 |
| 57 | 15 mm dia CP angular stop Cock |
| 58 | CP Flange Big |
| 59 | CP Flush bend |
| 60 | Supplying all materials labour T&P for construction of 1.2mtr dia and 1.2 mtr Depth leach pit of RCC ring of 50mm thickness with cover slab of 0.075 mtr thickness etc all complete as per approved design and drawing |
| 61 | Supllying all materials labour T&P for installation of 1000 Ltrs capacity PVC water tank over roof slab including 15mm brick masonary staging including other ancillary items etc all complete. |
| 62 | Labour for hoisting roatational moulded polyethylene cylindrical vertical water storage tanks of the following size for every additional height of 5M or part thereop(19653) |
| 63 | Supplying of all materials labour T&P for fixing 10 Ltrs capacity PVC Low level cistern with a pair of PVC brackets complete with fitting such as siphonic arrangement 15mm nominal size brass/PVC ball valve with ploythene float chromium plated brass handle unions and couplings for connection with inlet outlet and over flow pipes 32mm dia PVC long flush bend 12mm dia PVC inlet connection pipe, 15mm dia CP angle stop cock including cutting holes and making good the same and connecting the flush bend with cistern and closet and inlet pipe with supply main etc all complete as per specification and direction of EIC. |
| 64 | Fixing wash basins with hole for pillar taps confirming to IS 2556: Part 4-2004 with cast iron or MS brackets painted white including cutting holes in walls and making good the damage etc all complete as per specification. (Vitreous china flal wash basin) |
| 65 | Basin Bracket in pair |
| 66 | Supply all materials labour T&P for fixing kitchen sink/laboratory sink with cast iron MS bracket painted white including cutting holes in walls and making good to the damages etc all complete. |
| 67 | Supplying fitting and fixing og 1HP mono block pump with all acessories including cost of all materials and labour etc complete. |
| 68 | Supplying all materials, labour, T & P and fitting and fixing of PVC SWR Pipes & Fittings including cost & conveyance of all materials to worksite, payment of taxes etc. complete as per PH specification and direction of the Engineer-in-charge.75 mm PVC Pipe |
| 69 | 75 mm Floor trap (Nahani trap) |
| 70 | 110 mm Bend 87.5° |
| 71 | 75 mm Bend |
| 72 | PVC solvent cement |
| 73 | Vent pipe 75 mm With cowl |
| 74 | Add other unforeseen item incl. all cost complete Please Enable Macros to View BoQ information |
