|
| 1 | Dismentiling old plaster and pointing in cement or lime and raking out joint of 15 mm depth waterring and disposal of unservisable material with all lead as per direction of E/I |
| 2 | Providing 12mm thk. Cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 3 | Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge. |
| 4 | Providing 6mm thk. Cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water,scaffolding, taxes and royalty all complete as per builing specification and direction of E/I. |
| 5 | Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such shades except white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Extra for cleaning the old surface by scraping the entire old white wash or color wash including cost of scaffolding all complete as per bulding specification and direction of E/I |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 11 | Providing two coats of plastic emulsion paint of approved shade & make over a coat of cement primer on new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty whereever required, scafffolding, washing of floors & taxes all complete as per building specification and direction of E/I |
| 12 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat ofexterior primer applied @ 2.20 kg/10 sqm) |
| 13 | Taking down old door & window shutters including staking searvisable matarial within 15m lead and disposal of unservisable material with all lead as per direction of E/I |
| 14 | Taking down old door & window shutters including staking searvisable matarial within 15m lead and disposal of unservisable material with all lead as per direction of E/I |
| 15 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I. |
| 16 | Supplying, fitting and fixing 38mm , thick good quality well dressed and well seasoned Teak wood wire netted shutter in doors and windows with fly proof screen of 18 S.W.G. X12 to 16 mesh per cm2 with aliminium fittings such as hinges, sliding doors boltes tower bolts handles or rings, hooks and eyes, cleats, sand blocks as per schedule and 3mm thick plain glass panes fitted with teak wood beads and taxes all complete as per building specification and direction of E/I. |
| 17 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 18 | Providing one coat of synthetic enemel paint of approved shade and makeover old wooden surface including cleaning the surface after removing dirt, |
| 19 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning.removing dust,dirt,scales smokes and grease and cleaning the surface thoroughly including cost of scatfolding and taxes all comiplete as per building specification and direction ot E/l. |
| 20 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 21 | Supplying, fitting and fixing fully glazed steel door, windows or ventilators of standard Z and mullion steel Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 22 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and makinG provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 23 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness. |
| 24 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames einforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-charge9.117.1 Extruded section profile size 48x40 mm |
| 25 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (±0.2 mm) with inbuilt edging on both sides. The styles and rails mitredand joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filledwith a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 26 | Waterproofing for Old and New Roof Stab Providing and laying water roofing treatment on roaf slab by applying two Componenae Aeegredready ta use, acrylic tmoditted Waxible materigl applied win Sroler or spray tor water proofing.coating es per menur fácurer MAR SCHED SRedficathahs with followirig stepe surface pteparalionProdiig and cieaniog of concrete sutace emovedust, ol grease pcluding removal of existihg loasé pant ating, and cement taltancaby clethng wits compraseed air & waterjetst ding almatertals, tabour, toolsotmplete.Ponding leet to be donea ANN pluooir9.al cutets andtee checkedtron.softiderity seepageaoe On dentifcaipn oreepape, ce men grogto ba döne with on shrink expandmg admixtaureof sike tnaia PvLtd, FMYK Schomberg DFiRUFosToeor equivalent Providing-and reparing of ecorners and joiots suchas those between the paraper walt and the roof siab ete sha be chemfered wa 50mm 150 mm fillet of martar (Cement: and 4admxewih acrylic polymer of SikalFosroe/MYK Schomberg/Dr Ft of eguivalent. Before chamfering a prime èeoat shall be given witn the slurry of aCyic polymer. Repalring surface iregutarites, damaged concretainbase slab dead cracks if any, with an acrylic polymer modifiedirepair.mortar tncluding a coat of bonding agent of the same with cement slufry including all material, Jabour, tools complete. (6)1st Coat-Apply 1st use, coat of two component acrylic modifiad, reedy to fexibte cemenitious matérlal on surface saturated dry roof and inside walloParapet wall upto 600 mm by brush or roler After 1st of coat application, 45 gsm of Fibre glass cloth to lay when the stH green. first tayer is 1st.coat should be applied @1.50 kg/Sqmt/coat. For purpose the of measurement the entre (c) 2nd Coat-To treated.surface will be measured apply the 2nd coat of two ready component acrylic modified, to use, flexible cementtious material right over the angle to the st coat glass fibre laid surace. 2nd coat shoud be Sqmt/coat. For the [email protected] kg! purpose of measurement the wll be measured. entire reated surface After three days ofdrying the 2nd coat water outlets to be , the rain plugged and \ identify ponding test to be done for 48 hours to seepage, leakage from soffit and if found necessary rectfication to be done as per salisfaction of Elc. protected from damage before screed over it. Water Sika Topseal 109hl Fosroc Brushbond proofing Brand: RFX Dr Fixtt Pidiffin 2K/MYK The waterproof coating to be Product Performance- Chemical Base Part A: Aquafin TGG Acrylic copolymer, Part B: Specially graded cemenitious Density 1.6 kgA (mixed density) at +27°C powder 2 NVmm2 after 28 days (with Fibre cloth) (According to ASTMD Pullout Bond Strength 2370) -2 Nmm2 (concrete failure) (Accord |
| 27 | Wiring for light point/fanpoint/exhaust fan point/call bell point with 1.5 sq.mm FRPVC insulated copper conductors in glecorecable in surface/recessed PVC conduit,with modular types witch,modular plate,suitable size of GI box etc as required. |
| 28 | S/F Modular type electronic fan regulator :-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc asrequired. |
| 29 | S/F Ceiling Rose :- |
| 30 | Supply, fitting, fixing and testing of 1200mm Sweep, double ball-bearing, 2 canopy ceiling fan including connection with 1.5 sq mm copper wire, down rod all accessories as required. |
| 31 | Supplying and fixing single wall mounted 18/22 watt LED type batten fitting complete with electronic driver and LED tube etc directly on wall/ ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as required. |
| 32 | Supplying and fixing batten/ angle holder including connection etc. as required. |
| 33 | 15/16 Watt LED Bulb |
| 34 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. |
| 35 | Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50Mand lift of 1.5M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) |
| 36 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). |
| 37 | Providing and laying factory made chamfered edge Cement Concretepaver blocks in footpath, parks, lawns, drive ways or light trafficparking etc, of required strength, thickness & size/ shape, made bytable vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all asper direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 38 | Supplying, fitting and fixing 40mm high vitreous white glazed ware E.W.C. with \\"p\\" trap of parry/hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make and complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle cock of approved qualty weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and White/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide prining, all complete as per specification and direction of E/I. |
| 39 | Supplying fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of Hindustan \\"Parry\\" or any other approved ISS make with 5 liters capacity C.I. automatic fulsing cistern of reliance for any other I.S.S. approved make with all fittings clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grams 15 mm P.V.C /Alkthene pipe 450 mm long with bras coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a priming coat of red oxide cutting wall and floor, making good the same etc all complete as per specification and direction of E/I . |
| 40 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 41 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved qualityand colour. 15 mm nominal bore, weighing not less than 32 gms |
| 42 | Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 43 | Supplying, fitting and fixing H.C.I. pipes with ear of approved make conforming to I.S.I. 1729 including supplying nails and bobins short pieces, cutting loose collars, lead and yarn for making lead caulked joints, cutting pipes to size including earth woek or scaffolding where necessary etc. all complete as per specification and direction of E/I. 100mm dia |
| 44 | 75mm dia |
| 45 | Providing and fitting gun metal full way value of approved quality all complete as per specification and direction of E/I. 25 MM DIA |
| 46 | Supplying and fixing G.I. fitting of approved make all complete as per specification and direction of E/I. Elbow I . (a) 15mm dia |
| 47 | 20mm dia |
| 48 | 25 mm dia |
| 49 | tee plain .15 mm dia |
| 50 | 20mm dia |
| 51 | 25mm dia |
| 52 | reducing socket. 20mm dia |
| 53 | 25mm dia |
| 54 | nipple. 15mm dia |
| 55 | 20mm dia |
| 56 | 25mm dia |
| 57 | plug. 15mm dia |
| 58 | 20mm dia |
| 59 | 25mm dia |
| 60 | Union socket. 15 mm dia |
| 61 | 20mm dia |
| 62 | 25mm dia |
| 63 | socket plain. 15mm dia |
| 64 | 20mm dia |
| 65 | 25mm dia |
| 66 | reducing tee. 20mm dia |
| 67 | 25mm dia |
| 68 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.110 mm diameter |
| 69 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single pushfit Coupler.110 mm dia |
| 70 | Single tee with door. 110x110x110 mm |
| 71 | Bend 87.5°. 110 mm bend |
| 72 | Shoe (Plain) |
| 73 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 74 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 75 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes |
| 76 | 20 mm nominal dia Pipes |
| 77 | 25 mm nominal outer dia Pipes |
| 78 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 79 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:Brass stop cock |
| 80 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 81 | Supplying all materials, labours and tools and equipment for drilling 200x150 x125mm dia bore well in any kind of soil and rock by using DTH Super Rig machine and ball hammer technology inclusive of mobilization, demobilization, demobilization of rigs air compressor all accessories of rigs tool and plant labour etc. all complete job including transportation charge.(a) 0.00 to 50.00 M below G.L. |
| 82 | (b) 50.00 to 125.00 M below G.L. |
| 83 | Supplying, assembling, lowering and fixing in vertical position in bore well, un-plasticized PVC medium well casing (CM) pipe of required dia, all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia. |
| 84 | Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, all as per requirement and direction of Engineer-incharge. |
| 85 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe,Nremovable as per requirement, all complete for borewell of 150Nmm dia. |
| 86 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts required size complete.150 mm clamp. |
| 87 | Supplying fitting and fixing of KSB/KIRLOSKER/CRI make 2H.P. Submersible pump set having head of 135 metre including all taxes, royalty, etc.all complete job as per direction of E/I. |
| 88 | Supplying of 3 core 4 sq. mm flat copper cable of Finolex make for pump set connection with panel board including labour cost and making conneting etc. all complete. |
| 89 | Cost of one of ISI marked extre deep indiaa mark -II hand pump confirming to IS 13287 :1992 with latest amendment no Is 1to 6 complete with all ......do....do......E/I. |
| 90 | Supply fitting and fixing lowering 40 mm dia G.L. collumn pipedo do all complete job as per direction of |
| 91 | Earth work in excavation in foundation trenches in Hard soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M. including all lifts, leveling, ramming the foundation trenches, removing roots of trees,, shrubs all complete as per approved design, building specification and direction of E/I. Extra for earthwork in herd soil es per specificatlon and directian of E/I(Vide cleseitfioetion of soil item_B) |
| 92 | Providing coarse clean sand in filling in foundation trenches or in plinth & floor including ramming & watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 93 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over75mm thick bed of dry brick ballast 40 mm nominal size, well rammedand consolidated and grouted with fine sand, including necessaryexcavation, levelling & dressing & finishing the top smooth. |
| 94 | Providing and laying in position cement concrete of specified grade|excluding the cost of centering and shutfering All work up to plinthlevel:1:3:6 (1 Cement: 3coarse sandzone-ll):6 graded stone aggregate 20 |
| 95 | Providing designation 75A brick work in C.M (1:4) in foundation and plinth -do- |
| 96 | Providing 12mm thk. Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 97 | Providing 19mm thk. Water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other water proofing compound including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I |
| 98 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in stair case with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including centering, shuttering, screening, mixing cement concrete in mixer placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 99 | Centring and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform. |
| 100 | Centring and shuttering including strutting, propping etc. and removal of form for lintel, beams, plinth beams, griders, bressumers and contilevers. |
| 101 | TMTC-500 8mm dia |
| 102 | (i) C.I. cover and frame 300 x 300 mm inside |
| 103 | S.C.I. plain bend 100 mm dia |
| 104 | S.C.I. Tee 150 mm dia |
| 105 | Carraige of materials (i) cement |
| 106 | (ii) sand |
| 107 | Add 18% for G.S.T. |
| 108 | Labour Cess Please Enable Macros to View BoQ information |
