|
| 1 | Taking down shutter of any description area n.exc 1 sqm each including builders hardware complete all as specified and as directed. |
| 2 | Taking down shutter of any description area exc 1 sqm but n exc 2 Sqm each including builders hardware complete all as specified and as directed. |
| 3 | Taking down chowkats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm complete all as specified and directed. |
| 4 | Taking down chowkats or frame with shutters (without taking off shutters from frame) each exceeding 1.50 Sqm but n exc 4Sqm each complete all as specified and directed. |
| 5 | M&L for 2nd class hard wood, in scantlings, clean sawn timber as in unframed work including dismantling of old one complete all as specified and as directed. |
| 6 | M&L for 2nd class hardwood plain fillets bullnosed splayed, chamfered or rounded on one edge or face area n exc 3cm including dismantling of old fillet complete all as specified and as directed. |
| 7 | S&F 30mm thick factory made flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed. |
| 8 | S&F 30mm thick factory made second class hard wood glazed and skeleton shutters for door, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed. |
| 9 | S&F 30mm thick factory made second class hard wood glazed and skeleton shutters for windows,ventilators, etc. are provided with stiles and rails, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed. |
| 10 | S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed. |
| 11 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2020 complete all as specified and directed. |
| 12 | S & F 100 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 13 | S & F 75 mm size butt hinges, medium weight, cold rolled mild steel, and fixes, complete all as specified and as directed. |
| 14 | S & F 250 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed. |
| 15 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 16 | S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 17 | S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. |
| 18 | S&F 100 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. |
| 19 | S&F in repair 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 20 | S & F in repairs, floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and as directed. |
| 21 | Hacking out old broken glass of any thickness, size quality or description from wooden frames glazed with putty or fixed with bead complete all as directed. |
| 22 | S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 23 | S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed. |
| 24 | S & F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 25 | S & F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 26 | S&F for 4mm thick, plywood, grade BWR,type BB, fixed with nails to timber frame work fixed with nails to timber frame work on wall including taking out old plywood of any description complete all as specified and as directed. |
| 27 | M&L for weather boarding, 2nd class hard wood clean sawn, plain, 20 mm thick feather edged 15 mm to 20 mm thick and fixed with 30 mm laps and repairs to replace old or decayed boarding complete all as specified and as directed. |
| 28 | S & F prelaminated particle board 18/19mm, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in pelmet box includind taking out old pelmet box of any description complete all as specified and as directed. |
| 29 | S&F in repairs, 20mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 30 | S&F in repair powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed |
| 31 | S & F in repair anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necssary joining cleats,glazing clips,ruber neoprene packing, handle 2 Nos in Each door, hinges, anodised aluminium snap bidding, screw etc. complete all as specified and directed.Note: door closer shall be measured and paid seperatly. |
| 32 | S&F in repair anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed |
| 33 | S&F in repair anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge |
| 34 | S & F aluminium door closer (Diecast) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as specified and as directed. |
| 35 | M&L for 5 mm thick figured sheet glass, ordinary quality and glazing with aluminium beads, in square exc. 0.50 Sqm in each pane complete all as specified and as directed. |
| 36 | M&L for 12 mm thick pre-laminated particle board, exterier grade, prelaminated both side with decorative choice lamination, inserted in door panel complete all as specified and as directed. |
| 37 | M & L as in repair for fabrication of anodized aluminium curtain wall with frame of section 63.5mm x 38.1mm x 1.50 mm thick partly panelled and partly glazed, centre to centre distance not more than 1M each panel with necessary jointing cleats, glazing clips, rubber packing snap beading, angle cleats, screws, including 6mm thick ACP (Aluminium Composite Panel) sheet approved shade best quality on bottom panel and 5 mm thick float tinted glass on top panel complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 38 | M & L as in repair for fabrication of anodized aluminium curtain wall with frame of section 63.5mm x 38.1mm x 1.50 mm thick partly panelled and partly glazed, centre to centre distance not more than 1M each panel with necessary jointing cleats, glazing clips, rubber packing snap beading, angle cleats, screws, including 6mm thick ACP (Aluminium Composite Panel) sheet approved shade best quality on bottom panel and 5 mm thick float tinted glass on top panel complete all as specified and as directed. Please Enable Macros to View BoQ information |
