|
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Excavation in post holes in soft/loose soil each n.exc 0.5 cum getting out returning,filling in and ramming earth or broken rubble mixed with earth around in layer n exc 25 cm, watering and removing surplus soil to a distance n.exc 50mtr and making good surface all as directed. |
| 3 | S & F mild steel tubular/square/rectangular hollow section trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 |
| 4 | S & F rolled mild plates (plain or chequered) channels, square cut or notched, forming holes with riveted, bolted or welded attachment conforming to Fe 290 Gde E-165. |
| 5 | M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of on colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw complete all as per manufacturer instructions. |
| 6 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 7 | S & F Mild steel flats (40x6mm thick) for hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410 - O or Fe 310 -O. |
| 8 | M&L for cement concrete Type B2 1:2:4 (40mm graded aggregate) in foundations, filling and mass concrete. |
| 9 | M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 10 | M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) for sub base of flooring /hard standing including finishing the surface even and rough to receive the topping layer. |
| 11 | M & L of Machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laying over 50mm thich sand filling, set, jointed in neat cement slurry and pointed with grey cement mixed with pigment to match(Make : (Make- NITCO, MODERN, ULTRA) |
| 12 | M&L for sand cushioning including watering for Interlocking tiles complete all as specified and as directed. |
| 13 | Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxied priming. |
| 14 | Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep for foundations, etc and getting out in soft/loose soil complete all as specified and directed. |
| 15 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thickness as in soil complete all as specified and directed. |
| 16 | Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point. |
| 17 | M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 |
| 18 | M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth complete all as specified |
| 19 | M&L preparing newly plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed. Please Enable Macros to View BoQ information |
