|
| 1 | Earth work in excavation in trenches for foundations and for pipes, cables etc. not exceeding 1.5m in width and for shafts, cesspits and the like not exceeding 10sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m (b) Dense or hard soil |
| 2 | Providing and laying in foundation, plinth and under floors cement concrete with 40mm nominal size graded stone aggregates (metal) i/c ramming in layers and curing complete excluding cost of form work (b) C.C. 1:3:6 (1cement, 3sand, 6metal) |
| 3 | Providing and placing in position RCC for roof, beams, columns column footing lintels chhajjas, balcony, stairs etc, excluding cost of reinforcement but including centring, shuttering, proping, finishing & curing etc.complete.(b) CC 1:1.5:3 (1 cement, 1.5 sand, 3 graded stone aggregate 20mm nominal size) |
| 4 | Providing and placing in position tested steel for R.C.C. work including cutting, bending, binding etc. as per drawings and placing in position complete up to floor two level including cost of binding wire and all wastage etc. complete.(a) Mild steel and Medium tensile steel bars |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead upto 50m and lift upto 1.5m |
| 6 | Filling foundation, around masonry work, plinth, sides of foundation etc. with moorum I/c ramming layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead upto 50m and lift upto 1.5m. |
| 7 | Brick work with fly ash bricks having 50kg/cm2 average compressive strength conforming to IS:12894-2002 in super structure above plinth level up to floor II level in:(b) Cement mortar 1:6 (1cement,6sand) |
| 8 | 15mm thick cement plaster on rough side of wall in(c) Cement mortar 1:5 (1cement, 5sand) |
| 9 | 10mm thick cement plaster on fair side of wall in(c) Cement mortar 1:5 (1cement, 5sand) |
| 10 | 6mm cement plaster to Ceiling.(a) In Cement mortar 1:3 (1cement, 3sand) |
| 11 | Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching igment etc., complete. |
| 12 | Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours & shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 13 | Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand)(e) Size 800X1200 mm thickness 11-12mm |
| 14 | 15mm thick cement plaster on rough side of wall in(a) Cement mortar 1:3 (1cement, 3sand) |
| 15 | Snowcem or durocem painting of any shade(a) 2 coats on new work |
| 16 | Painting with enamel paint, brushing, interior to give an even shade I/n cleaning the surface of all dirt dust and other foreign matter on steel and other metal surfaces.(a) 3 coats |
| 17 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) :(c) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). |
| 18 | Add extra for providing and fixing froasted glass instead of float glass(c) With glass panes of 8 mm thickness (weight not less than 20 kg/sqm). |
| 19 | Providing and fixing in position collapsible steel shutters with vertical channels 20mm x 10mm x 2mm braced with flat iron diagonals 20mm x 5mm size with top and bottom rails of T-iron 40mm x40mm x6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles. |
| 20 | Steel work welded in built up sections, framed work, including cutting hoisting fixing in position in gratings, frames, guard bars, ladders, railing, brackets and similar works & trusses and trussed purlins up to 25m spanand 15 m over all height |
| 21 | Providing and fixing water closet squatting pan (Indian type W.C. pan) size 580mm (earth work bed concrete, foot rests and trap to be measured and paid for separately) (c) Vitreous China Orissa pattern- standard colour |
| 22 | Providing and fixing wash down water closet squatting pan (European type W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement, 1fine sand) - (seat and cover to be measured and paid for separately)(d) Vitreous China -Pattern 2 in standard colour. |
| 23 | Providing and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to measured and paid for separately)(b) Vitreous China flat back type of size 430 mm x 260 x mm x 350 mm in Standard colours except misty-lilac. |
| 24 | Providing and fixing wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white ncluding cutting holes and making good the same but excluding fitting.(b) Vitreous China flat back wash basin 630 mm x 450 mm size in standard colour except Misty-Lilac |
| 25 | Providing and fixing on Wall face Asbestos Cement building pipe of the following nominal size including jointing with sun yarn soaked in bitumen and cement mortar 1:2 (1cement, 2sand) complete .(c) 100 mm dia |
| 26 | Providing and fixing asbestos cement fitting. Plain Bend of the following nominal size including jointing with spun yarn soaked in bitumen and cement mortar 1:2 complete.(c) Plain bend.100 mm dia |
| 27 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangment and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 28 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (medium grade) of the following nominal bore, tube fittings and clamps including walling making good the wall, ceiling and floor(a) 15 mm dia. |
| 29 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (medium grade) of the following nominal bore, tube fittings and clamps including walling making good the wall, ceiling and floor(c) 25 mm dia. |
| 30 | Providing and Fixing Brass Screw Down Bib Taps polished bright of the following nominal bore.(a) 15mm dia. |
| 31 | Providing and Fixing Brass Screw Down Bib Taps polished bright of the following nominal bore.(c) 25mm dia |
| 32 | Electrification work Please Enable Macros to View BoQ information |
