Tender For General Maintenance/Up-Keeping Of District Court Complex For The Year 2026-27, Kathua-Jammu And Kashmir

TDR : 54954983

Tender Notice
BOQ

10 Days Left

Kathua , Jammu And Kashmir

Tender Brief : Tender For General Maintenance/Up-Keeping Of District Court Complex For The Year 2026-27

Document Fees
₹ 600 /-

EMD
₹ 20000.0 /-

Tender Value
Refer document

Submission Date
15-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Providing & fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting & making good the walls wherever required(Hindware/Cera/Parryware or eqivalvalent make) White Vitreous China wash basin 630 x450mm with a single 15mm C.P. brass pillar taps complete job.
2	Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including paintingof fittings and brackets, cutting and making good the walls wherever required (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
3	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (Hindware/Cera/Parryware or eqivalvalent make)
4	Providing and fixing white vitreous china water closet squatting pan (Indian type) Orrisa pattern size 580 x 440 mm (Hindware/ Cera/ Parryware or eqivalvalent make)complete job.
5	Providing & fixing white vitreous china pedestal type (European type/ wash down type) water closet pan (Hindware/Cera/Parryware or eqivalvalent make)complete job.
6	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid.
7	Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre capacity-White complete job. Hindware/Cera/ Parryware or eqivalvalent make)
8	Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White
9	Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete semi rigid pipe 32 mm dia
10	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required . Kitchen sink without drain 610 x 510 mm with bowl depth 200 mm
11	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350mm and 340 x 410 x 265mm sizes respectively with automatic flushing cistern with CI/MS brackets standard size of G.I. flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete including painting of fitting and brackets, cutting & making goods the walls & floors wherever required. One urinal basin with 5 litre P.V.C. automatic flushing of approved quality
12	Providing and placing on terrace (at all floor levels ) polythylene Water Storage Tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for intlet, outlet and overflow pipes but without fitting and the base support for tank (Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license )
13	Providing and fixing 600 x 450 beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
14	Providing & fixing unplasticised P.V.C. connection pipe with brass union 30 cm length 15mm nominal bore
15	Providing & fixing C.P. brass shower rose with 15 mm or 20 mm inlet 150mm diameter complete job.
16	Providing and fixing C.P hand spray with lever control (health faucet) and flexible hose 1 mtr long connection with C.P holder for hand spray complete in all respects as per direction of Engineer-In-charge
17	Providing & fixing G.I. pipes complete with G.I. fitting and clamps including cutting and making good the walls etc.Internal Work-Exposed on wall
18	15mm nominal bore Medium
19	20mm nominal bore Medium
20	25mm nominal bore Medium
21	Providing & fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc complete
22	15mm nominal bore Medium
23	20mm nominal bore Medium
24	25mm nominal bore Medium
25	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing
26	20mm nominal outer dia pipes.
27	25mm nominal outer dia pipes
28	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
29	20mm nominal outer dia pipes.
30	25mm nominal outer dia pipes.
31	Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes
32	75mm dia
33	110 mm dia
34	150 mm dia
35	Providing and fixing on wall face un-plasticized - PVC moulded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansio
36	75mm dia Plain bend
37	110 mm dia Plain bend
38	Providing and fixing15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931
39	Providing and fixing15 mm dia nominal bore C.P. brass long nose bib cock of approved conforming to IS standards and weighing not less than 810 gms
40	Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
41	Providing & fixing 15mm nominal bore C.P. brass angle valve for basin mixer and gyser points of approved for conforming to IS : 8931
42	Providing & fixing 15mm nominal bore Plastic bib cock
43	Providing & fixing 15mm nominal bore Plastic Angle Valve
44	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
45	15mm nominal bore
46	20mm nominal bore
47	25mm nominal bore
48	Supplying of Following Sanitary and Water Supply fittings:-
49	Inner face of approved quality
50	Disk face of approved quality
51	Jet of approved quality
52	Pillar Cock brass of approved quality
53	G.I Elbow 15mm of approved quality
54	G.I Elbow 20mm of approved quality
55	G.I Elbow 25mm of approved quality
56	G.I Socket 15mm of approved quality
57	G.I Socket 20mm of approved quality
58	G.I Socket 25mm of approved quality
59	G.I Tee 15mm of approved quality
60	G.I Tee 20mm of approved quality
61	G.I Tee 25mm of approved quality
62	G.I Reducer 15mmx 20mm of approved quality
63	G.I Reducer 25mmx 20mm of approved quality
64	G.I Reducer 15mmx 25mm of approved quality
65	G.I Elbow 15mmx20mm of approved quality
66	G.I Elbow 20mmx25mm of approved quality
67	G.I. Elbow 25mmx15mm of approved quality
68	G.I. Nipple 15x 50mm of approved quality
69	G.I. Nipple 15x 100mm of approved quality
70	G.I. Nipple 15x150mm of approved quality
71	G.I. Nipple 20 x 50mm of approved quality
72	G.I. Nipple 20x 100mm of approved quality
73	G.I. Nipple 20x 150mm of approved quality
74	G.I. Nipple 25x50mm of approved quality
75	G.I. Nipple 25x100mm of approved quality
76	G.I. Nipple 25x150mm of approved quality
77	White Cement 1 Kg pack of approved quality
78	Cistern Syphon of approved quality
79	Cistern Handle of approved quality
80	Cistern Vassel of approved quality
81	W.C. Seat Cover White/Coloured of approved quality
82	C.P. Nipple of approved quality
83	C.P. Grating of approved quality
84	C.P. Cup of approved quality
85	Towel Rod of approved quality
86	Towel Ring of approved quality
87	PVC Collar 75mm,100mm of approved quality
88	P.V.C Floor Trap of approved quality
89	P.V.C Tee of approved quality
90	G.I Check Valve of approved quality
91	P.V.C Cistern ball Cock of approved quality
92	Float Valve brass of approved quality
93	Tank Nipple of approved quality 25 mm , 20 mm
94	Waste Coupling of approved quality
95	C.P Soap Dish of approved quality
96	CPVC Union 20mm of approved quality
97	CPVC Union 25mm of approved quality
98	CPVC Ball Valve 20mm of approved quality
99	CPVC Ball Valve 25mm of approved quality
100	CPVC Brass MTA 20x15mm of approved quality
101	CPVC Brass MTA 20x20mm of approved quality
102	CPVC Brass MTA 20x25mm of approved quality
103	CPVC Brass FTA 20x15mm of approved quality
104	CPVC Brass FTA 20x20mm of approved quality
105	CPVC Brass FTA 20x25mm of approved quality
106	C.P Wall Mixer of approved quality
107	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete
108	100 x 10 mm
109	150 x 10 mm
110	200 x 10 mm
111	Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete
112	100mm
113	125mm
114	Providing & fixing aluminum sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to req. colour or shade with nuts & screws etc. complete:
115	300 x 16mm.
116	250 x 16mm.
117	Providing and fixing aluminium hanging floor door stopper ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Twin rubber stopper
118	Door closer Spring Type of approved quality
119	Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :
120	Renewing Glass panes and refixing existing wooden fillets Float Glass Panes of thickness 4.0 mm (weight not less than 10 kg/ sqm)
121	Renewing Glass panes, with Putty & Nails wherever necessary float Glass Panes of thickness 4 mm (weight not less than 10 kg/ sqm)
122	Butt Hinges 3\\" of approved quality
123	Butt Hinges 4\\" of approved quality
124	Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material in cement mortar, all leads & lifts.
125	Demolishing cement concrete 1 : 3 : 6 or richer mix manually/ by mechanical means including disposal of material, all leads & lifts.
126	Demolishing RCC work manually /by mechanical means including stacking of steel bars and disposal of unserviceable material ,all leads & lifts.
127	Demolishing mud phaska in terracing and disposal of material including all leads & lifts.
128	Demolishing brick tile covering in terracing including stacking of serviceable material & disposal of unserviceable material including all leads & lifts.
129	Painting top of roofs with bitumen of approved quality at 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm incl. cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of grade VG-10.
130	10 cm thick mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg/cum of earth and gobri leaping with mix 1 : 1 ( 1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 mixed with 2% of integral water proofing compound by weight of cement & finished neat with common burnt clay (non modular) brick tile of class designation 10.0 incl. all leads, lifts & carriage of material by MT/ H.L.
131	Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations. a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer in- charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge.d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with water proofing compoundconforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineerin- charge.With average thickness of 120mm and minimum thickness at khurra as 65 mm
132	Providing & laying 400 micron thick transparent Poly Vinyl Chloride sheet on the roof under mud phaska cutting placing complete job.
133	Making Khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 Coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1 m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete incl. all leads, lifts & carriage of material by MT/ H.L.
134	Providing gola 75 x 75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 10mm down gauge) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design in 75 x 75 mm deep chase incl. all leads, lifts & carriage of material by M.T / H.L.
135	Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope, relaying plaster gobri leaping and tiles and bricks, grouted in cement mortar 1:3 (1 cement :3 fine sand ) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) including all leads, lifts & carriage of material by MT / H.L.
136	Taking out doors, windows,windows and clerestory window shutters (steel or wood) of area of 3 square metres and below including stacking of material, all leads and lifts.
137	Dismantling old plaster or skirting, raking out joints & cleaning the surface for plaster including disposal of rubbish to the dumping ground with all leads & lifts.
138	Dismantling tile work for thickness of tiles 10 mm to 25 mm in floors and walls laid in cement mortar including stacking material, all leads & lifts.
139	Dismantling wooden trellis work excluding frames but including stacking the serviceable material including all leads & lifts.
140	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking of area 3 sqm and below ,all leads & lifts.
141	Dismantling of flushing cistern of all types ( C.I /PVC/Vitreous china) incl. stacking of useful materials near the site & disposal of unserviceable materials incl. all leads, lifts & carriage of material by MT/H. L.
142	Dismentling C.I. or Asbestos rain water pipes of 100 mm dia pipes with fittings and clamps including stacking the material , all leads & lifts.
143	Removing mortar from brick work in cement mortar and cleaning bricks including stacking of material, all leads & lifts ( stacks of cleaned bricks shall be measured).
144	Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits & the like not exceeding 10 sqm on plan, including dressing of sides & ramming of bottoms , incl. disposal or filling of excavated earth wherever required as per the directions of Engineer-in-charge .
145	Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, lead upto 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil
146	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) incl. all leads, lifts & carriage of material by MT/ H.L.
147	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1 : 4 :8 ( 1 cement : 4 coarse sand : 8 graded crushed stone aggregate 40 mm nominal size) including all leads, lifts and carriage of material by MT / H.L.
148	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size ) including all leads, lifts and carriage of material by MT / H.L
149	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:. 1 : 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20 mm nominal size ) incl. all leads, lifts and carriage of material by MT / H.L
150	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size ) including all leads, lifts and carriage of material by MT / H.L
151	Providing and laying damp proof course 40 mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT/H.L.
152	Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT / H.L.
153	Providing and laying dry stone agg. using 40mm nominal size incl. spreading, levelling,sand grouting, watering, ramming, etc all complete incl. all leads, lifts & carriage of material by MT / H.L.
154	Brick work in cement mortar common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curring in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all shapes, leads, lifts and carriage of material by MT / H.L.
155	Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level incl. all leads, lifts and carriage of material by M.T. H.L.
156	Half brick masonry with bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 ( 1 cement :4 coarse sand) including all leads, lifts and carriage of material by MT / H.L.
157	Extra for half brick masonry in superstructure above plinth level upto floor V level including all leads, lifts and carriage of material by M.T. H.L.
158	6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) incl. all leads, lifts and carriage of material by M.T. / H.L.
159	12mm cement plaster of mix 1:4 (1 cement : 4 fine sand) incl. all leads, lifts & carriage of material by MT / H.L.
160	15mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand) including all leads, lifts and carriage of material by MT / H.L.
161	Repairs to plaster of thickness 12 mm to 20 mm with cement mortar 1:4 (1 cement : 4 fine sand) in patches of area 2.5 sq. metres & under including cutting the patch in proper shape ranking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground ,all leads and lifts.
162	Making plinth protection 50 mm thick of cement concrete 1:3 : 6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed & consolidated & grouted with fine sand including finishing the top smooth. Crushed aggregate including all leads, lifts and carriage of material by MT/H.L.
163	Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20 mm nominal size) incl. all leads, lifts & carriage of material by MT/ H.L. .
164	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl. all leads, lifts & carriage of material by MT/ H.L. .
165	Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level incl.curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). incl. all leads, lifts and carriage of material by MT/H.L.
166	Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete Thermo Mechanically Treated bars /Cold twisted bars including all leads, lifts and carriage of material by MT / H.L.
167	Centring and shuttering including strutting propping etc and removal of form work for
168	Foundations, footings, bases of columns etc. for mass concrete
169	Lintels, beams, plinth beams, girders, bressumers and cantilevers
170	Suspended floors, roofs, landings, balconies and access platform.
171	Columns, pillars, piers, abutments, posts and struts.
172	Edges of slabs and breaks in floors and walls under 20 cms wide.
173	Raking out joints in lime or cement mortar and preparing the surface for repainting or replastering including disposal of rubbish to the dumping ground with all leads and lifts.
174	Flush pointing with cement mortar 1:3 ( 1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska with non modular brick tiles
175	Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed & fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or with dash fasteners shall be paid for separately)
176	Sal Wood
177	2nd Class Deodar Wood
178	2nd Class Kail Wood
179	Providing and fixing 35mm thick wire gauze shutters of Second Class deodar wood using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :
180	Providing and fixing 35mm thick glazed shutters of Second class deodar wood for doors, windows and clerestory windows using 10 kg/ sqm (4 mm thick) float glass panes including black enameled ISI marked M.S. butt hinges bright finished of required size with necessary screws.
181	Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with inecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class deodar wood
182	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick , Particle Board 12 mm thick plain particle board flat pressed, three layer or graded wood particle board medium density grade IS: 3087 marked.
183	Providing and fixing 35mm thick ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws incl. all leads, lifts and carriages of material by M.T/H.L
184	Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 2nd class teak wood beading 62 x 19 mm
185	Providing 40x 5 mm flat iron hold fast 40cm long incl. fixing to frame with 10mm diameter bolts nuts and wooden plugs with embeddings in cement concrete blocks 30 x 10 x15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size including all leads, lifts and carriage of material by MT / H.L.
186	Providing and fixing 16 mm thick gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen plateform,vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement:4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curring moulding and polishing to edge to give high gloss finish etc. complete at all levels Granite of any colour and shape(Area of slab upto 0.50 sqm)
187	Providing edge molding to 18 mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer- in -Charge. for granite work
188	Extra for providing opening of required size and shape for wash basins/ kitchen sink platform, vanity counters and similar location in marble/ stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.
189	Providing and laying vitrified floor tiles in size of tile 60 cm x 60 cm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% & confirming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1 : 4 (1 cement : 4 coarse sand) including grouting the joints with white cement & matching pigments etc. complete including all leads, lifts and carriage of material by MT / H.L.
190	Providing and laying matt finished vitrified tile of 300 x 300 x 9.8 mm size having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge.
191	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
192	Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all leads, lifts and carriage of material by MT / H.L.
193	Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge
194	Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Medium shade using 50% white cement and 50% ordinary cement.
195	Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate
196	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : including all leads, lifts and carriage of material by M.T/ H.L.Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5
197	Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
198	Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frames, guard bar, ladders railing, brackets, gates & similar works.
199	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
200	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing & staircase railing and similar work including applying a priming coat of approved steel primer. G.I.pipes
201	Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm and braced with flat iron diagonals 20 x 5 mm size with top and bottom rail of T-iron 40 x 40 x 6 mm with 40 mm dia, steel pulleys complete with bolts, nuts locking arrangement, stoppers, handles including applying a priming coat of approved steel primer.
202	Providing and fixing 1 mm thick M.S. steel door with frame of 40 x 40 x 6 mm angle iron and 3mm M.S. gusset plates at the junction and corners , all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece.
203	Providing and fixing M.S. grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete
204	Fixed to openings/ wooden frames with Rawl plugs screws etc.
205	Fixed to steel windows by welding.
206	Providing and fixing aluminum work for doors, windows ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, milted and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge( glazing, paneling and dash fasteners to be paid for separately.)
207	For fixed portion anodized aluminum (anodized transparent or dyed to required shade according to IS : 1868 minimum anodic coating of grade AC 15)
208	For fixed portion Powder coated aluminum ( minimum thickness of powder coated 50 microns)
209	Providing and fixing aluminum work for doors, windows ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, milted and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge( glazing, paneling and dash fasteners to be paid for separately.) For shutters of doors, windows & ventilators including providing and fixings hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required( Fittings shall be paid for separately).
210	Anodised aluminum ( anodized transparent or dyed to required shade according to IS : 1868, minimum anodic coating of grade AC 15)
211	Powder coated aluminum (minimum thickness of powder coated 50
212	Providing and fixing glazing in aluminum door, window, ventilators shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.( Cost. Of aluminum snap beading shall be paid in basic item) With floating glass panes of 4.0 mm thickness ( weight not less than 10.00 kg/sqm)
213	Providing and fixing ACP sheet panelling 4.0 mm thick in Partition/doors of approved quality as per the direction of Engineer- in - Charge (Complete job)
214	Providing and fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade-I, Type-II conforming to IS : 12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass / stainless screws etc. compete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.
215	Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws@ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)
216	Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
217	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo em,possed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing & cover plates with brass pivot\\" & single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25mm thickness.
218	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts & bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) complete job.
219	Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets. 25mm dia (heavy type).
220	Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
221	Providing and Fixing of PVC Panelling including cutting jointing, fixing etc complete job of good quality
222	Providing and Fixing of PVC false ceiling including cutting jointing, fixing etc complete job of good quality
223	Providing and fixing Honour Board of size 1.20m x 0.75m incl. c/o acrylic sheet and lettering complete job
224	Providing & fixing of PVC window blinds of good quality incl rod and brackets complete job
225	Providing & fixing of Acrylic Plate incl. Lettering complete job
226	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
227	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats ) over & including priming coat with cement primer.
228	Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work.
229	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
230	Wall painting with acrylic emulsion paint of approved brand and manufature to give an even shade. Two or more coats on new work.
231	Wall painting with plastic emulsion paint of approved brand and manufature to give an even shade. one or more coats on old work.
232	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.One or more coats on old work.
233	Painting with synthetic enamel paint of approved brand brand manufacture to give an even shade. Two or more coats on new work
234	Providing and applying White Cement based Putty of average thickness 1 mm of approved brand & manufacture, over the plastered wall surface to prepare the surface even & smooth complete.
235	Providing and applying White Cement based Putty of average thickness 2 mm of approved brand & manufacture, over the plastered wall surface to prepare the surface even & smooth complete.
236	Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard & soft wood)
237	Finishing walls with water proofing cement paint of required shade:Old work ( one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litres/10 sqm complete including cost of priming coat.
238	Finishing walls with water proofing cement paint of required shade:Old work (one or more coats applied @ 2.20 kg/10sqm) complete.
239	Finishing wall with water proofing cement paint of required shade - New work (two or More coats) applied @ 3.84 kg/10 sqm
240	Finishing wall with acrylic smooth exterior paint with required shade on New work (two or more coats applied) @ 1.67 litre/10 sqm over & including base Coat of water proofing cement paint applied @ 2.20 kg/10 sqm.
241	Finishing walls with Acrylic smooth exterior paint of required shade Old work ( two or more coats applied @ 1.67 litres/10 sqm on existing cement paint surface)
242	Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .
243	Color washing such as green blue or buff to give an even. New work ( two or more coats) with a base coat of white washing with lime.
244	White washing with lime to give an even shade on New work (three or more coats)
245	White washing with lime to give an even shade : Old work (two or more coats)
246	Cleaning of septic tank by mechanical means complete job
247	Labour Charges for Carpentor/ Mason/Plumber/Electrician /Welder or equavailent skilled type
248	Labour Charges for Mazdoor/Helper
249	Hire charges of Welding/ gas welding set including cost of weding rods etc.
250	Providing and fixing wall to wall matting (complete item)
251	Providing and fixing wall to wall floor acrylic carpeting (complete item)
252	Supplying and filling at site Good earth including all leads, lifts and carraige of material.
253	Supplying and laying including digging, carrying by lorry, filling River Bed Material including watering & consolidation in layers to specified lines, camber, grades and cross sections. Finished work including material , labour all leads , lifts and carriage of material by MT/HL.
254	Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation7.5 bricks & S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design
255	Supplying and filling of stone dust at site, including all leads, lifts and carriage of material by MT / H.L. etc. complete
256	Supplying of Following Tent house items fittings:-
257	Hire Charges for Providing & installation of Shamiana of size 15-0// x 15/-0// with side curtain complete job.
258	Hire Charges for Providing and laying matting /red mat complete job.
259	Hire Charges for providing and installation of Table with paper roll etc.complete job, per No. per Day.
260	Hire Charges for providing and installation of Plastic Chairs complete job, per No. per Day.
261	Hire Charges for providing and installation of VIP Chairs complete job, per No, per Day.
262	Hire Charges for providing and installation of Pedestal fans Complete job, per No. per Day.
263	Hire charges for providing and installation of 3 seater VIP Sofa complete job
264	Hire charges for providing and installation of 2 seater VIP Sofa complete job
265	Hire charges for providing and installation of Portable Fan Complete job
266	Engaing Mahindra pickup /tractor with trolley for carriage of Sofa, Table etc. (within 3 km distance per trip)
267	Providing and installation of stage including construction of front decorative 4 ft height ( with certified drawing and design of load bearing capacity of minimum 15 person at a time ) for sitting arrangements of VIP's by way of providing and installation of temporary columns and beams covered with decorative clothes of different colours with polythene sheet over it, including carriages per day (Complete job) .
268	Providing and installation of stage including water proofing roof (temporary) for sitting arrangements of VIP's by way of providing and installation of temporary columns and beams covered with decorative clothes of different colours with polythene sheet over it, including carriages per day (Complete job) .
269	Providing and fixing/writing of flex board including proper anchoring legs/stand (Complete job) .
270	Providing and installation of 2.50 tonne capacity of air conditioner at VIP stage complete job
271	Decoration by using Flowers ( including cost of making garland,labour and carriages all complete job
272	Providing and fixing inauguration stone (granite of size 3/x 2/) including engraving , painting, writing and const. of pedestal of size 4'-6\\"x 5'-6\\" by way of brick work and plastering, painting incl. all leads , lifts and carriage of material by M .T./H.L. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jammu And Kashmir Tenders

Services Tenders

Hospitality Related Services Tenders

Housekeeping Services Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For General Maintenance/Up-Keeping Of District Court Complex For The Year 2026-27, Kathua-Jammu And Kashmir

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For General Maintenance/Up-Keeping Of District Court Complex For The Year 2026-27, Kathua-Jammu And Kashmir

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us