|
| 1 | Dismantling of R.C.C. work manually by machenical means including Stacking of steel bars and disposalof unserviceability material with in 50 meter lead as per engineer incharge. Chapter-17- S.I.-15.3 |
| 2 | First class work in 1:4 cement and core sand of 1.25 F.M mortar in Superstructer including supply of all materials, labour and T&P etc. required for proper completion of work. As per Sor chapt. 6 SI NO. 305 (NS) |
| 3 | Dismantling Doors, Window and clerestory window (steel and wood) Shutter including chaukhats , architrrave, holdfast etc. complete and stacking with in 50 meter lead of area beyond 3 sqm |
| 4 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per directionof Engineer-in-Charge.14.17 |
| 5 | 12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. |
| 6 | 6mm Celling plaster 1:3 (1 cement : 3 Coarse sand) cement & fine sand in F.M. not less than 1.25, 1:3 including chiping of RCC surface before ceiling plaster. The cost of including all material, labour T&P and scafolding etc. complete. |
| 7 | Providing and Applying white cement based putty average thickness of 1 mm of approved brand over the plasterd wall surface.as per Chap-15 S.I. no-SOR no. 13.80 |
| 8 | Wall Painting with plastic emulsion paint of approved brand an manfacture to give an even shade: two or more coats on new works. Chapter-15 (13.60.1) |
| 9 | 4.00 cm thick 1:2:4 plain cement concrete floor with cement, aproved coare sand and 2 cm graded approved stone laid in panels finished with 3 mm flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 8 cm thick base concrete consisting of cement, local sand and brick ballast 4 cm gauge in the proportion of 1:4:8 and removing any over lappign mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc. required for proper comletion of the work. S.I.(601-601(A)+665) |
| 10 | R.C.C Work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1½:3 in slab excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I binding wire and including necessary cretering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of the work. binding wire cost being included in the items. As per Sor Chapt No. 5 SI No. 284 NS |
| 11 | Mild Steel or iron in plain work such as reinforced concrete or reinforcement brick work (when not included in an over all rates) wrought to required shape as necessary including benefit for proper completion fo the work and including supply of all steel and wastage and over lappign and hooks. |
| 12 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.. Including welding, grinding, buffing. Polishing and making curature ( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangment as per approved of Engineering-in-charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 13 | M.S. or Iron work angle iron frames for doors , windows Frame including cutting welding and wastage incluidng supply of all material labour 502(A) Please Enable Macros to View BoQ information |
