|
| 1 | Charges for Supplying, fixing and removing of barricading arrangements using 10 to 13 cm dia Casurina Props 3.60m height vertically @ 75cm c/c and tied horizontally with same casurina props 5 rows tying with new coir rope and removing the same after counting is over. |
| 2 | Hire Charges of above materials for 16 Days |
| 3 | Charges Supplying, fixing and removing of barricading arrangements using 10 to 13 cm Casurina Props of tying 60cm below ground level fixing and 2.10m above ground level fixing and 5 to 8 cm dia Casurina Props five rows horizontally horizontally 0.45m above ground level and tying with new coir rope and removing the all materials after the counting is over. |
| 4 | Hire Charges of above materials for 3 days (Before Counting) |
| 5 | Charges Supplying, fixing and removing of barricading arrangements using 10 to 13 cm Casurina Props of tying 60cm below ground level fixing and 2.10m above ground level fixing and 5 to 8 cm dia Casurina Props five rows horizontally horizontally 0.45m above ground level and tying with new coir rope and removing the all materials after the counting is over. |
| 6 | Hire Charges of above materials for 3 days (For Election Counting) |
| 7 | Charges for Supplying, erection and removing for G.I Temporary Shed using Casurina props vertically and tied horizontally at top for purlins and fixing GI sheet above the purlins etc., complete complying with standard specifications. |
| 8 | Hire Charges of above materials for 16 Days |
| 9 | Charges for Supplying, fixing & Removing of Galvanised Iron Sheet of 18 gauge thickness and fixing properly by using country wood reepers of size 5cm x 2.5cm and nails etc ., complete complying with standard specification and as directed by the departmental officers |
| 10 | Hire Charges of above materials for 16 Days |
| 11 | Charges for Supplying, fixing & Removing of providing Partition wall using 100mm x 75mm Country wood Reepers for Vertical supports and 50mmx25mm reeper for horizontal tie and with 12mm thick commercial Plywood etc complete complying with standard specification |
| 12 | Hire Charges of above materials for 16 Days |
| 13 | Charges for Supplying, erection and removing 12mm thick water proof plywood sheet of approved make and quality and fixing properly by using country wood reepers of size 5cm x 2.5cm and nails etc ., complete complying with standard specification and as directed by the departmental officers |
| 14 | Hire Charges of above materials for 16 Days |
| 15 | Supplying and fixing of cross bars for doors with M.S Steel flats including fabrication, welding charges, transportation charges and removing the same after the counting is over and including hire charges for 37 days etc., complete as directed by departmental officers. |
| 16 | Charges Supplying, fixing and removing of barricading arrangements using 10 to 13 cm Casurina Props of tying 60cm below ground level fixing and 2.10m above ground level fixing and 5 to 8 cm dia Casurina Props five rows horizontally horizontally 0.45m above ground level and tying with new coir rope and removing the all materials after the counting is over. |
| 17 | Hire Charges for 13 days (For Election Counting) |
| 18 | Charges for Supplying, fixing and removing of Weld mesh protection over the casurina barricading of weld mesh of size 2.5cm x 2.5cm and fixing properly by using binding wire etc ., complete complying with standard specification and as directed by departmental officers |
| 19 | Hire for 16 Days |
| 20 | Charges for Supplying, fixing and removing of Weld mesh protection for corridor openings by providing M.S weld mesh of size 7.50cm x 2.50cm and fixing properly by using country wood reepers of 50mm x 25mm for both horizontal and vertical supports etc ., complete complying with standard specification and as directed by departmental officers |
| 21 | Hire for 16 Days |
| 22 | Charges for M.S Weld Mesh Cutting for making Counter openings for each counting tables & PVC Beadings are provided all-round the openings for better finishing and safety aspects etc., complete as directed by the departmental officers |
| 23 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls |
| 24 | Brick Masonry walls in Cement mortar: Below 3m Height |
| 25 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs |
| 26 | Dismantling clearing away and carefully stacking materials usefull for reuse RCC etc., complete and as directed by the depatmental officers. |
| 27 | Brick work in Cement Mortar 1:6 (one Cement and Six M-sand) using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 28 | In Ground Floor |
| 29 | In First Floor |
| 30 | Brick partition walls of 10.80cm thickness using best quality Burnt Clay Brick of size 8-3/4” x 4-1/4” x 2-3/4” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 31 | In Ground Floor |
| 32 | In First Floor |
| 33 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 34 | White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed. |
| 35 | Painting Old Plastered Wall Surface with One finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 36 | Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 37 | Ground floor |
| 38 | First floor |
| 39 | Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 40 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 41 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with One coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 42 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying,40mm thick finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete |
| 43 | Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 44 | Hire Charges for floor mat (Red Colour Carpet) arrangements as directed by the departmental officers |
| 45 | Hire for 13 Days(For Before Counting) |
| 46 | Hire charges for Plastic Moulded chairs including transporting labour for loading and unloading and recollecting the same after the function is over but excluding the labour charges for spreading the chairs etc complete |
| 47 | Armed plastic chairs (for 13 days) |
| 48 | Armed plastic chairs (for 16 Days) |
| 49 | Hire Charges for Stainless Steel table of size 1.20m x 0.60m including conveyance, loading & un-loading charges and recollecting the same after the counting is over but excluding the labour charges for spreading the tables etc., complete as directed by the departmental officers. |
| 50 | Hire Charges for 13 Days |
| 51 | Hire Charges for Three Seater Sofa including conveyance, loading & un-loading charges and recollecting the same after the counting is over etc., complete as directed by the departmental officers. |
| 52 | Hire Charges for 6 Days |
| 53 | Hire Charges for Single Seater Sofa including conveyance, loading & un-loading charges and recollecting the same after the counting is over etc., complete as directed by the departmental officers. |
| 54 | Hire Charges for 6 Days |
| 55 | Hire Charges for Teapoy including conveyance, loading & un-loading charges and recollecting the same after the counting is over etc., complete as directed by the departmental officers. |
| 56 | Hire Charges for 6 Days |
| 57 | Hire Charges for Glass Pot with top lid (Spherical Shape) having dia of 230mm with approved make and quality as directed by the departmental officers. |
| 58 | Providing and fixing of flex board arrangements .The Cost is inclusive of flex board with all-round runner/M.S tubes for fixity,labours,conveyance and other miscellaneous accessories etc., complete as instructed by the departmental officers |
| 59 | Hire charges for supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS 15683 with pressure gauge, discharge hose & control nozzie, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found and remove the same after the counting is over.,etc complete as per standard specification and as directed by the Departmental Officers. |
| 60 | Hire Charges for 16 Days |
| 61 | Hire charges for Supply and fixing Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS:15683., complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition and remove the same after the counting is over etc., complete as per standard specification and as directed by the Departmental Officers |
| 62 | Hire Charges for 16 Days |
| 63 | Hire Charges for White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) |
| 64 | Hire Charges for providing and fixing approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm ( without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete and removing the same after the counting is over |
| 65 | Hire charges for Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 66 | Hire Charges for brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 67 | Hire Charges for approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 68 | Hire Charges for providing and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 69 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 70 | 20mm dia PVC Pipe |
| 71 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 72 | PVC Elbow-110mm dia |
| 73 | PVC Tee -110mm dia |
| 74 | PVC Bend-110mm dia |
| 75 | Hire Charges for JCB engaged for the purpose of debris cleaning ,dozing and levelling works in the College building campus for Election Counting Centre etc., complete as directed by the departmental officer incharge |
| 76 | Labours (Mazdoor-Gr.I)engaged to Shifting of Steel table, chairs, Almirah & other furniturs etc., from New Class Room building to the Auditorium building and re-arranging the same after the election counting is over etc., complete as directed by the departmental officers |
| 77 | ADD GST 18% Please Enable Macros to View BoQ information |
