|
| 1 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. completeand stacking within 50 meters lead: Of area exceeding 3 square meter |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 3: 6 or richer mix. |
| 3 | Dismantling old plaster or skirting, raking out joints andcleaning the surface for plaster including disposal of rubbishto the dumping ground within 50 meter lead |
| 4 | Providingand laying inposition cement concrete includingcuring,compactionetc.completeinspecifiedgradeexcludingthecostofcenteringandshuttering-Allworkuptoplinthlevel. M10 grade Nominal Mix1:3:6(1cement :3coarsesand:6gradedstone aggregate40mm nominal size). |
| 5 | Half brick masonry in Superstructure , above plinth level uptofloor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 6 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with whitecement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Rajasthani Black Above 3601 Cm2 Slabs |
| 7 | Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite/Kota Stone Work Full Edge moulding |
| 8 | P &F1st quality Heavy Duty Vitrified Double Charged tileson floor, skirting and steps etc.in different sizes (thicknessminimum 10mm) with water absortion less than or equal0.08% and conforming to IS 15622 of approved make in allcolour and shade, laid with 20 mm thick CM 1: 4 includinggrounting the joints with white cement and matching pigmentetc complete.size 600 mm X 600mm |
| 9 | P & F 1st quality Heavy Duty Vitrified Double Charged tiles in walls, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in allcolour and shade, including grounting the joints with white cement and matching pigment etc complete, size 600 mm X 1200mm (excluding the cost of cement plaster) |
| 10 | Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesiveper sqm of tile area, in average 3mm thickness instead of cement mortar. |
| 11 | Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps : (1) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. (2 )Applying Epoxy primer on the exposed steel bars.(3)Applying Epoxy hardener and resin mix (as per manufectured's specification) on concrete and steel bars with brush. (4) Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day.(5) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete (6)Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. |
| 12 | 6mmthickcementplastertoceilingofmix 1:3(1cement :3fine sand) |
| 13 | Plaster onnewsurfaceonwalls incement sandmortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . |
| 14 | Removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandla/loi and all scaffolding (for colour changing only) |
| 15 | Applying one coat of Cement primer of approved brand and manufacture on wall surface including all scaffolding: |
| 16 | Providing and applying white cement based putty overplastered surface to prepare the surface even and smoothcomplete New Plastered Surface (three or more coats) |
| 17 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. |
| 18 | Painting exterior surface of Wall with 100% acrylic exteriorpaint of approved brand and manufacture to give an evenshade with two or more coats including prepartion of basewith sand papering, primer, putty, etc complete in all respectincluding scaffolding and safety provision New Work |
| 19 | Providing and fixing of uPVC casement fixed windows or ventilatorsmanufactured in ISO 9001:2000 & 14001:2004 certified company.Frame : Made from the Extruded uPVC Window Profile Section of size60 x 60mm having outer wall thickness of 2.25mm (+/- 0.2mm) and 3box multi-chamber construction, White in finish, duly reinforced with1.2mm thick G/J/U/O TYPE GI section. All the four corners shall bemitered cut & thermal welded so as to form window frame. Frame shallbe milled with drain and air equalizer hole in order to be water tight andfor drainage of accumulated water, if any, to outer side. Fix Mullionmade of 76 x 60mm uPVC Profile Section with steel reinforcement shallbe provided in windows as per the requirement. Frame shall have „O‟type EPDM gasket fitted in in-built groove of frame profile for properair & sound insulation of the shutter. Glazing bead of size 34 x 20mmwith „K‟ & „O‟ type innerand outer EPDM weather seal gaskets alongwith 5mm thickISI make plain float glass.All welding joints of frame andshutter shall be cleaned and milled with the CNC mechanismto provide uniform grooved finish on all visible joints.Hardware : Installation at Site : Complete window is to beinstalled on site with 10 x 100mm fastners with white cap inexisting pre-finished wall cut-out cemented to glass level planeat all height & width and silicon glue is applied to fill up thecrevices between wall and window frame. Complete in allrespect as per the drawing and specifications and direction ofengineer-in-charge. |
| 20 | Providing and fixing of uPVC Sliding windows: Frame Made from the Extruded uPVC Window Profile Section of size 106w x 50h mm having outer wall thickness of 2.5mm (+/ 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2 mm thick GI section. Frame shall have three track configuration, two for sliding of window shutter and one for mosquito mesh shutter. Vertical member of frame which bears the sliding shutter load shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. Shutter : The shutter of sliding window shall be made of 39w x 69h mm Extruded 3 box multi- chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI section duly mitered cut & thermal welded at all corners and fitted with uPVC glazing bead of size 22 x 20 mm |
| 21 | Providing and fixing of openable uPVC Doors with or withoutfix top: Frame Made of Extruded uPVC Window ProfileSection of size 60w x 70h mm having outer wall thickness of2.75mm (+/- 0.2mm) and 3 box multi-chamber construction,White in finish, duly reinforced with 1.2mm thick GI section.All the corners shall be mitered cut & thermal welded so as toform door frame. Fix Mullion made of 60w x 80h mm uPVCProfile Section with steel reinforcement shall be provided forthe top fix portion of the doors or in case of the doors havingmore than two openable shutters, as per the requirement /drawing. Frame of openable door shall have „O‟ type EPDMgasket fitted in in-built groove of frame profile for proper air& sound insulation of the shutter. Shutter : The shutters ofopenable door shall be made of 60w x 95h mm Extruded 3 boxmulti-chamber uPVC Window Profile Section of white colourhaving outer wall thickness of 2.75mm (+/- 0.2mm) providedwith reinforcement of 2.0 mm thick GI section duly miteredcut & thermal welded at all corners, provided with centermullion (if specified in drawing) of size 60w x 80h mm uPVCProfile Section and fitted with uPVC glazingbead of size 36 x 20mm with inner and outer co-extrudedEPDM/TPE-E weather seal gaskets alongwith 6mm thick ISImake plain float glass. All welding joints of frame and shutter shall be cleaned andmilled with the CNC mechanism to provide uniform groovedfinish on all visible joints. Hardware: Each openable doorshutters is to be fixed with three load beading butt hinges andlocking of doors is to be provided with multi-pointtransmission gear (ESPAG) with white finish powder- coatedlockable handle. Installation at site: Complete door is to beinstalled on site with 10 X 100mm fastners with white cap inexisting pre-finished wall cut-out cemented to glass level planeat all height & width and silicon glue is applied to fill up thecrevices between wall and door frame. Complete in all respectas per the drawing and specification and direction of engineerin-charge. |
| 22 | Random rubble dry stone Kharanja under floor. |
| 23 | Carriage of Building Rubbish Stone metal (Grit and ballast etc.) For 10 Km. |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) |
| 25 | 20 mm nominal outer dia pipes |
| 26 | 25 mm nominal outer dia pipes |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes (IS 15778 : 2007 code) having thermal stability for hot& cold water supply including all CPVC plain & brassthreaded fittings, this included jointing of pipes & fittings withone step CPVC solvent cement ,trenching refilling & testingof joints complete as per direction of Engineer in Charge.(External work). |
| 28 | 20mm nominal size |
| 29 | 25 mm nominal size |
| 30 | 40 mm nominal size |
| 31 | 50 mm nominal size |
| 32 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. |
| 33 | 75 mm dia |
| 34 | 110 mm dia |
| 35 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 36 | socket |
| 37 | (i) 75mm dia |
| 38 | (ii) 110mm dia |
| 39 | Reducer 110 X 75 mm |
| 40 | (i) 110 mm dia |
| 41 | Plain Tee |
| 42 | (i) 75mm dia |
| 43 | (ii) 110mm dia |
| 44 | Bend 45 |
| 45 | (i) 75mm dia |
| 46 | (ii) 110mm dia |
| 47 | Bend 87.5 |
| 48 | (i) 75mm dia |
| 49 | (ii) 110mm dia |
| 50 | Y tee |
| 51 | (i) 75mm dia |
| 52 | (ii) 110mm dia |
| 53 | Door Bend |
| 54 | (i) 75mm dia |
| 55 | (ii) 110mm dia |
| 56 | Plain floor trap |
| 57 | 110mm dia |
| 58 | Vent Cowel |
| 59 | 75mm dia |
| 60 | Door Cap |
| 61 | 75mm dia |
| 62 | Providing and Fixing Unplasticized Poly Vinyl Chloride(UPVC)SWRPipesfittingstypeBforscilandwastedischarge system (IS:13592 : 1992 Marked) of approved quality /make |
| 63 | Nahni Trap with Jali 4” |
| 64 | 110mm dia |
| 65 | P & F Grating of approved quality/make: Stainless Steel Sheet size 125mmdia. Heavy Quality of approved make |
| 66 | P&F15mm.DiaConnectionPipeofapprovedquality/make. PVC pipe with C.P. Brass nuts upto length, 600mm |
| 67 | P&FlstqualityWVCUrinal (IS:2556mark)with25mmdiaG.I. waste pipe, dome waste couplings, concealed ironbrackets or screws etc complete. Mini stall size 455x385x350mm. |
| 68 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 69 | Short point (up to 3 mtr.) |
| 70 | Medium point (up to 6 mtr.) |
| 71 | Long point (up to 10 mtr.) |
| 72 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, errules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 73 | 2 x 1.5 sq.mm |
| 74 | 2 x 2.5 sq.mm |
| 75 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 76 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 77 | Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419- 1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work referAnnexure 'A' attached with this BSR |
| 78 | On board |
| 79 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 80 | 20 mm |
| 81 | 25 mm |
| 82 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947- 2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 83 | Single pole MCB (With B/C curve tripping Characteristics) |
| 84 | 6 A to 32 A rating |
| 85 | Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 86 | Providing & Fixing of of ventilating fans Capacitor start, copper wounded, single phase with PVC impeller, ABS body, automatic openable louver shutter in existing opening including making connection, testing etc. as required. All as per pre approved by Engineer in charge. For additionaltechnical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR 250 mm sweep |
| 87 | Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb in existing holder or fixture as required with system lumen efficacy ≥100 lm/Watt output ,pf 0.95 , CRI >70, minimum life time of minimum 25000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer Annexure \\"A\\" attacheded with this BSR. 18/20 Watt |
| 88 | Providing & Fixing of ISI marked (IS:1258) batten/angle lamp holder with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screwsincluding making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 89 | Providing & Fixing of Vertical(BEE 5 star rated) / Horizontal( BEE 3 star rated) storage water heater with outer casing made of Engineering Plastic sheet (Upto 25 Ltr) / Metal rust proof Body (35 & 50 Ltr), Glass - line / Titanium Enamel coated Pressure Pump Compatible 8 bar pressure Inner tank, Glass Line Coated , mineral filled heating element, stem type, snap action adjustable thermostat , Dual indicating lamps Injected PUF insulation, Multi Function Valve etc. as required held in position with 2/4 no. 10/12 mm anchor Fastener, duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top with Portable Residual Current Device ( PRCD ) , including making inlet, outlet Flexible alloy connection, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 15 Ltr |
| 90 | Providing&Fixing of BEE Star rated copperwoundeddoubleballbearingcapacitorstart,aluminiumbody&MetallicbladeceilingfanConformingtoalltheperformancerequirementslaiddowninIS374:2019includingallamendments,asapplicable;&CarryBISlicensing (i.e. ISImarking)withdownrodupto80cmwithsecondarysupport safetycable( steel rope) , cotterpinwith3x1.5sq.mmpvc insulated flexiblecopperconductormakingconnectiontestingetc.asrequired.All as per pre approvedby Engineer in charge. For additional technical parametersofproducts/work , refer Annexure\\"A\\"attachedwiththis BSR . 1400 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 ) |
| 91 | Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 92 | 5 step fan regulator 2 Module 360 dgree rotating |
| 93 | Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 1170mm(+/-10%) LED batten with min. lumen output 2200 lm |
| 94 | Dismantling of existing toilets i/c dismantling of plaster, Wall and floor Tile, GI pipes, CI pipes with fittings, sanitary wares complete with care & as per direction of E.I. |
| 95 | Recovery of the dismantled material of toilets |
| 96 | Dismantling of existing Room i/c dismantling of plaster, floor Tileas per direction of E.I. |
| 97 | P/F looking mirror 5 mm thick on walls (Atul/eqnivalunt) with back of 6mm thick water proof ply, with 50 X 20mm heritage decorative design bidding of MP teak wood on all the four sides with polish. Complete as per direction of E.I. |
| 98 | Recovery of the damaged windows, wooden doors, frames taken out from rooms & toilets |
| 99 | Providing & Fixing Premium Quality (Hindware/ Cera make) white glazed WC vitreous china Sanitary Wares as per direction of Engineer-in-charge including cutting and making good floor, One piece W.C with seat cover and cistern with plate |
| 100 | Providing & Fixing premium quality (Hindware/ Cera make) WVC Wash basin with C.I. brackets duly painted & 32 mm C.P. brass waste coupling of approved make, Size 550 mm x 400 mm dia for pedestal type. Including Pedestal. |
| 101 | Providing & Fixing Jaguar Continental prime series or equivalent make as approved 1. Bottle trap internal portion 32mm, size 250mm long wall connection pipe & wall flange with waste coupling as per approved by Engineer in Charge. |
| 102 | Providing and fixing Jaguar Continental prime series or equivalent make as approved by E.I. CP Brass fittings of approved make as per direction of Engineer-in-charge |
| 103 | Two way Bib Cock 15 mm nominal size |
| 104 | Bib Cock 15 mm nominal size |
| 105 | Angular stop cock with inlet connection, long thread 15 mm nominal size |
| 106 | Concealed Stop Cock |
| 107 | Pillar Cock |
| 108 | Wall mixer concealed single lever divertors of superior quality and approved make: C.P. brass Tip-tone divertor bath spout with mixing valve. |
| 109 | 600 mm long towel rail |
| 110 | Revolving type towel ring |
| 111 | Soap dish |
| 112 | 190 mm rain shower |
| 113 | Shower arm length 450mm |
| 114 | Paper holder |
| 115 | Soap dispenser |
| 116 | Health focet (Premium heavy Quality) as approved byEngineer-in-Charge |
| 117 | Hook 4 rod |
| 118 | Add extra for using premium quality tiles like Kajaria/ Somany or equivalent of following size |
| 119 | Heavy Duty Vitrified Double Charged tiles size 600 mm X 600 mm |
| 120 | Heavy Duty Vitrified Double Charged tiles size 600 mm X 1200mm |
| 121 | Labour charges for dismantling of existing old unserviceable electrical wiring with conduit, switch board, switches and sockets etc |
| 122 | Recovery of old dismantled/ unserviceable electric wiring with conduit, switch board, switches and sockets etc |
| 123 | Labour charges for dismantling of existing old unserviceable electrical accessories like fans, geysers, exhaust fan etc complete. Handing over all serviceable material to the unit incharge as per direction of EIC. |
| 124 | S&F heritage type mirror light fixture with led fency light tri color, 2 feet length all as per approved sample. |
| 125 | Recovery of old dismantled/ unserviceable GI pipe of dia as per direction of E.I. |
| 126 | Labour charges for taking existing window/ split AC with care including gas/ drainage pipe complete in all respect and handing over safely to unit in charge |
| 127 | Providing and fixing 33 mm thick BWP flush door using 3 mm comercial ply for making grooves and design. On both surface 1 mm thick mica. Complete with necessery hinges screw and adhsive nails etc. |
| 128 | Providing and fixing wall panelling using 19 mm and 12 mm thik BWP ply and 1 mm thick mica on exposed surface. Complete with necessery screws nails adehsive etc. |
| 129 | Providing and fixing wall panelling using 19 mm thik BWP ply and 1 mm thick mica on exposed surface. Complete with necessery screws nails adehsive etc. Please Enable Macros to View BoQ information |
