Tender For Annual Maintenance Contract By Way Of Civil Repairs Of Various Dwelling Of Estates Department For, Fair View Guest House, Nehru Helipad Section) At Gupkar, Srinagar For The Year 2026-27., Srinagar-Jammu And Kashmir

TDR : 54947640

Tender Notice
BOQ

6 Days Left

Srinagar , Jammu And Kashmir

Tender Brief : Tender For Annual Maintenance Contract By Way Of Civil Repairs Of Various Dwelling Of Estates Department For, Fair View Guest House, Nehru Helipad Section) At Gupkar, Srinagar For The Year 2026-27.

Document Fees
₹ 1600 /-

EMD
₹ 130000.0 /-

Tender Value
₹ 65 Lakhs /-

Submission Date
10-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 min width as well as10 sqm on plan including disposal of excavated earth, leadupto50 meter and lift upto 1.5m, as directed by Engineer-in-Charge.All kinds of soil:
2	Deduct for not rolling with power roller of minimum 8tonnes for banking excavated Earth in layers not exceeding 20cm in depth.
3	Deduct for not watering the excavated earth for banking.
4	Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5m in widthaswell as10m2 on plan)includingdisposal ofexcavated earth lead upto 50meters and lift upto 1.5 m,as directed by Engineer-in-Charge. All kinds of soil:
5	All kinds of soil
6	Earth work in bulk excavation bymechanical means(hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50meters and lift upto 1.5 m,as directed by Engineer-in-Charge.
7	All kinds of soil
8	OrdinaryRock
9	Earth workin excavation bymanualmeans intrenchesfor foundations, drains,pipes, cablesetc. (not exceeding1.5m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms liftupto 1.5 m, including getting outexcavated earth and disposalof surplus excavated earth as directed: All Kinds of Soil
10	Rate for a lead upto 1 meter from cutting edge
11	Rate for a lead upto 25 meter from cutting edge
12	Rate for a lead upto 50 meter from cutting edge
13	Extra for every additional lift of 1.5 morpart there of in excavation /banking excavated or stacked material :
14	All kinds of soil :
15	Ordinary or hard rock
16	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating eachdeposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
17	Excavating,supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20cm in trenches,plinth,sides of foundation etc.complete.
18	Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbish, lead upto50m and lift upto1.5min-All kinds of soil.
19	Supplying and filling in plinth with fines and under floors including, watering, ramming,consolidating and dressing complete.
20	Clearing grass and removal of the rubbish upto a distance of 50m outside the periphery of the area cleared.
21	Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
22	Beyond 30 cm girth upto and including 60cm girth
23	Beyond 60cm girth upto and including 120cm girth.
24	Beyond 120cm girth upto and including 240cm girth.
25	Above 240cm girth
26	Extra for levelling & neatly dressing of disposeds oil completely as directed by Engineer-in-charge.
27	Pumping outwatercaused by springs, tidal or river seepage,broken water mains or drains and the like.
28	Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions,all inclusive.
29	Providing and laying dry stone soling in the Trenches/ feilds duly hand packed in level including ramming with iron rammers for foundation including all carriages up to 15 kms, Loading and unloading.
30	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering.All work upto plinth level with:
31	1:1½:3 (1cement: 1½coarsesand: 3gradedstoneaggregate 20mm nominal size)
32	1:2:4 (1cement :2coarsesand: 4gradedstone aggregate 20mm nominal size)
33	1:2:4(1cement: 2coarses and: 4graded stone aggregate 40mm nominal size)
34	1:3:6 (1cement: 3coarses and: 6graded stone aggregate 20mm nominal size)
35	1:3:6 (1cement: 3coarses and: 6graded stone aggregate 40mm nominal size)
36	1:4:8 (1cement: 4coarses and: 8graded stone aggregate 40mm nominal size)
37	1:5:10 (1cement: 5coarses and: 10graded stone aggregate 40mm nominal size)
38	Providing and laying cement concrete in retaining walls,return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses ,parapets, coping,bedblocks,anchors blocks,plainwindowsills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.
39	1:1½:3 (1cement: 1½coarse sand: 3graded stone aggregate 20mm nominal size)
40	1:2:4 (1cement: 2coarses and: 4graded stone aggregate 20mm nominal size)
41	1:3:6 (1cement: 3coarses and: 6graded stone aggregate 20mm nominal size)
42	1:3:6 (1cement: 3coarses and: 6graded stone aggregate 40mm nominal size)
43	1:5:10 (1cement 5coarses and: 10graded stone aggregate 40mm nominal size)
44	1:5:10 (1cement: 5coarses and: 10graded brick aggregate 40mm nominal size
45	Providing & laying damp-proof Course 40mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete
46	Providing and layingdamp-proof Course 50mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
47	Providing and mixing waterproofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.(1kg of waterproofing material in 50kg of cement)
48	Applying a coat of residual petroleum bitumen of gradeVG-10 of approved quality using1.7 kg per square meter on damp proof courses after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
49	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal sizewell rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete
50	Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level.
51	1:1½:3 (1cement: 1½coarses and: 3graded stone aggregate 20mm nominal size)
52	1:2:4 (1cement: 2coarses and: 4graded stone aggregate 20mm nominal size)
53	Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and strutsuptofloor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1cement: 1½coarsesand: 3graded stone aggregate 20mm nominal size).
54	Reinforced cement concrete workin beams, suspended floors, roofs havingslope upto15°, landings, balconies, shelves, chajjas,lintels, bands, plain windowsills, staircasesandspiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with --- 1:1½:3 (1cement: 1½coarses and: 3graded stone aggregate 20mm nominal size)
55	Providing and laying upto floor v level reinforced cement concrete in kerbs, steps and the like including curing but excluding the cost of centering, shuttering, finishing and reinforcement with---1:1½:3 (1cement: 1½coarses and: 3graded stone aggregate 20mm nominal size)
56	Centering and shuttering including strutting ,propping etc.and removal of form for:
57	Foundations, footings, bases of columnsetc.for mass concrete.
58	Walls (anythickness) including attached pilasters, buttresses, plinth and string coursesetc.
59	Suspended floors ,roofs ,landings ,balconies and access platforms.
60	Shelves(cast-in-situ)
61	Lintel, beams, plinth beams, girders, bressumers and cantilevers.
62	Columns, pillars, piers, abutments,posts and struts.
63	Stairs (excluding landings) except spiral stair cases.
64	Spiral stair cases (including landings)
65	Extra for shuttering in circular work (20% of respective centering and Shuttering items)
66	Smalll intels not exceeding1.5m clears pan, mouldings as in cornices,window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
67	Edges of slabs and breaks in floors and walls Under 20cm wide
68	Edges of slabs and breaks in floors and walls Above 20cm wide
69	Steel reinforcementfor R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level and above Plinth level.
70	Mild steel and medium tensile steel bars
71	Hard drawn steel wire
72	Cold twisted bars
73	Hot rolled deformed bars
74	Hard drawn steel wire fabric
75	Thermo-Mechanically Treated bars of gradeFe-500D or more.
76	Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 fine sand) including curing.
77	Extra for rendering smooth the top of suspended floors, landings and staircases (treads and risers) with cement mortar 1:2 (1 cement: 2 coarse sand) including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm of earth laid over 15 mm of fine sand in case of suspended floor and bricks laid in mud mortar in case of landingsand steps including subsequent removal and cleaning of the same.
78	Extra for laying reinforced cement concrete in or under foul position.
79	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in:
80	Cement mortar 1:4 (1cement: 4coarse sand)
81	Cement mortar 1:6 (1cement: 6coarse sand)
82	Extra for brick work with common burnt clay bricks /cement concrete bricks in superstructure above plinth level upto floor five level
83	Extra for brick work in:Square or rectangular pillars
84	Extra for brick work with bricks of class designation 75 curved on plan upto a meanradius not exceeding 6 meters.
85	Extra for cutting or chamfering of bricks to required shape in masonry work.
86	Half brick masonry with common burnt clay (non-modular) bricks of class designation7.5 in foundations and plinth including curing in :
87	Cement mortar 1:3 ( 1 cement : 3 coarse sand)
88	Cement mortar 1:4 ( 1 cement : 4 coarse sand
89	Extra for half Brick masonry in superstructure above plinth level upto floor V level.
90	Extra for half Brick masonry in superstructure, above floor V level for every four floorsor part thereof by mechanical means.
91	Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every thirdcourse of half brick masonry.
92	Labour charges for Brickworkwithcommonburntclay(non-modular)bricksofclassdesignation7.5in foundation / plinth and superstructure includingcuringin Cementmortar1:4& 1:6 (1cement:4 or 6coarse sand ):
93	Random Rubble masonry with hard stone in foundation and plinthincluding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Quarry Stone (a-Cement mortar 1:6 (1Cement: 6coarse sand))
94	Random Rubble masonry with hard stone in foundation and plinthincluding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Nallah Stone (b-Cement mortar 1:6 (1Cement :6coarse sand))
95	Random Rubble masonry with hard stone in superstructure above plinthincluding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Quarry Stone (a-Cement mortar 1:6 (1Cement :6 coarse sand))
96	Random Rubble masonry with hard stone in superstructure above plinthincluding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Nallah Stone (b-Cement mortar 1:6 (1Cement :6coarse sand))
97	Dryrandomrubblemasonrywithhardstoneinfoundationandplinth: Withbondstone.Withoutbondstone Quarry Stone
98	Dryrandomrubblemasonrywithhardstoneinfoundationandplinth: Withbondstone Nallah Stone
99	Dryrandomrubblemasonrywithhardstoneinfoundationandplinth: Withoutbondstone Nallah Stone
100	Coursed Rubble Masonry with hard stone in foundation and plinth and curing complete with: 7.6.1 Cement mortar1:6(1Cement :6coarseSand)- 1stSort
101	Coursed Rubble Masonry with hard stone in foundation and plinth and curing complete with Cement mortar 1:6 (1Cement: 6coarse Sand)- 2ndSort
102	Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.One face dressed -Fine chisel dressed.
103	Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.One face dressed -Rough chisel dressed
104	Marble work gang sawcut (polished and machinecut) of thickness 16 mm for wall lining (veneer work), backingfilledwitha grout of12mmthickaveragein cement mortar1:3(1 cement: 3coarsesand), includingpointingwith white cement mortar 1:2(1white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar plain white marble/Udaipur green marble/zebra black marble.
105	(Area of slab upto 0.5sqm)
106	(Area of slab over 0.5sqm)
107	Providing and fixing gang sawcut, mirror polished, premoulded and prepolished,machine cut for kitchen platforms,vanity counters,windowsills,facias and similar locations,of required size, approved shade,colour and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4coarses and),joints treated with white cement, mixed with matching pigment,epoxy touchups,including rubbing,curing, moulding and polishing to edges to give high gloss finish etc.complete at all levels –
108	Raj Nagar plain white marble/Udaipur green marble/zebra black marble: 16 MM
109	(Area of slab upto 0.5sqm)
110	(Area of slab over0.5 sqm)
111	Granite of any colour or shade -16 MM
112	(Area of slab upto 0.5sqm)
113	(Area of slab over 0.5sqm)
114	Granite of any colour or shade -18 MM
115	(Area of slab upto 0.5sqm)
116	(Area of slab over 0.5sqm)
117	Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
118	MarbleWork
119	GraniteWork
120	Extra for fixing marble / granite stone over and above corresponding basic item, infacia and drops of width upto 150mm with epoxy resin based adhesive including cleaning etc complete.
121	Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
122	Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete.
123	Stone tile (polished) work for walllining over 12mm thick bed of cement mortar 1:3 (1 stone tile (polished) work for walllining over 12mm thick bed of cement mortar 1:3 (1 cement with curing complete.
124	8mm thick - Raj Nagar white marble/Udaipur green marble/zebra black marble
125	8mm thick - Granite of any colour and shade
126	18mm thick Doongri Adanaga marble
127	Wall lining butch work upto10mheight with Dholpur stone40mm thickrough facingon the exposed surface with stone strips of minimum length 300mm and required width includingembeddingeverytenth layer andbottommostlayerin masonryor concreteafter making necessary chases of size 75 x 75mm and by providing layer of75 thick strips including 12mm thick bed of cement mortar 1:3 (1cement: 3coarse sand) including ruled pointing in cement mortar 1: 2 (1 white cement : 2 stone dust) with an ad mixture of pigment to match the shade of the stone and curing complete as per the directions of engineer-in-charge.
128	Providing and fixing plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface- Second class Teak Wood
129	12mm thick
130	20mm thick
131	25mmthick
132	40mm thick
133	Providing and fixing plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface- Second class Deodar Wood
134	12mm thick
135	20mm thick
136	25mmthick
137	40mm thick
138	Providing and fixingin wall lining of specified medium densityboard, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete.:-Flatpressed 3layer particle board or graded wood particle boardgrade-Itype-II, IS: 12823 marked including primer coat on unexposed surfaces
139	12mm thick
140	18mm thick
141	25mm thick
142	Providing and fixingin wall lining of specified medium densityboard, pre- laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc.complete :- MDF board IS:1998 marked.
143	12mm thick
144	18mm thick
145	25mm thick
146	Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc, including priming coat complete:
147	Second Class Teak Wood
148	Second Class Kail Wood
149	Kiln seasoned and chemically treated hollock wood
150	Providing and fixing plain panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface etc., complete.:-Second class Teak Wood
151	12mmthick
152	20mmthick
153	25mmthick
154	40mmthick
155	Providing and fixing plain panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface etc., complete.:-Second class Deodar Wood
156	12mmthick
157	20mmthick
158	25mmthick
159	40mmthick
160	Providing and fixing plywood 4mm thick one side decorative veneer conforming toIS: 1328(type1),for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures
161	Providing and fixing 4mm thick coir veneer board ISI marked IS:14842 plain lining with necessary screws,priming coat on unexposed surface etc.complete
162	Providing and fixing skirting of specified board pre laminated with (one side decorative and other side balancing lamination), medium density Grade I exterior grade, with necessary fixing arrangements and screws including drilling necessary holes for rawlPlugs etc complete.
163	Flatpressed 3layer particle boardor graded wood particle board grade-Itype-II, IS:12823 marked including priming coat on unexposed surfaces- 18 mm .
164	Flatpressed 3layer particle boardor graded wood particle board grade-Itype-II,IS:12823 marked including priming coat on unexposed surfaces- 25 mm.
165	Providing and fixing skirting of specified board pre laminated with (one side decorative and other side balancing lamination), medium density Grade I exterior grade, with necessary fixing arrangements and screws including drilling necessary holes for rawlPlugs etc complete.
166	MDF board conforming to IS:14587 edges to be sealed with PVC edge bending tape 2.00mm thick of approved brand.-18 mm
167	MDF board conforming to IS:14587 edges to be sealed with PVC edge bending tape 2.00mm thick of approved brand.-25 mm
168	CERAMICGLAZEDTILESProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting,risersof stepsand dados over 12mmthick bed of cementmortar 1:3 ( 1 cement : 3 coarse sand) and jointing with greycement slurry@ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
169	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class teak wood
170	First class teak wood
171	Second class teak wood
172	First class deodar wood
173	Second class deodar wood
174	First class kail wood
175	Second class kail wood
176	Sal wood
177	Providinglaminated veneer lumber conformingtoIS. 14616andTAD-15: 2001 (part B) in factory made frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugsor with dash fasteners shall be paid for separately).
178	Providing hoisting and fixing trusses/purlins/rafters/posts/post-platesorlike components including cost ofscrews etc. complete:A) SecondclassKailwood
179	A) SecondclassKailwood
180	B) FirstclassBudloo/Firwood
181	Providing wood work in frames of false ceiling, partitions etc.sawn and fixed in position:- Salwood
182	Providing wood work in frames of false ceiling, partitions etc.sawn and fixed in position:- Budloo/Firwood
183	Providing wood work in frames of false ceiling, partitionsetc.sawn and fixed in position:- Kiln seasoned and chemically treated hollockwood
184	Extra for circular works,such as in frames of fan light
185	Second class teak wood
186	First class deodar wood
187	Second class deodar wood
188	First class kail wood
189	Second class kail wood
190	Salwood
191	Kiln seasoned and chemically treated hollock wood
192	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws,excluding panelling which will be paid for separately,all complete as per direction of Engineer-in-charge.(Note:-Butt hinges and necessary screws shall be paid separately).-35 mm THICK
193	Secondclassteakwood
194	Firstclassdeodar wood
195	Secondclassdeodar wood
196	Firstclasskailwood
197	Secondclasskailwood
198	Kiln seasoned and chemically treated hollock wood
199	Kiln seasoned selected planks of sheesham wood
200	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws,excluding panelling which will be paid for separately,all complete as per direction of Engineer-in-charge.(Note:-Butt hinges and necessary screws shall be paid separately).-30 mm THICK
201	Secondclassteakwood
202	Firstclassdeodar wood
203	Secondclassdeodar wood
204	Firstclasskailwood
205	Secondclasskailwood
206	Kiln seasoned and chemically treated hollock wood
207	Kiln seasoned selected planks of sheesham wood
208	Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of :(Note:-Butt hinges and necessary screws shall be paid separately)
209	12 mm thick plain grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848:
210	12 mm thick pre-laminatedparticle board (decorative lamination on both sides)grade-I,mediumdensityflat pressedthreelayer particleboardFPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade-I, Type-II marked :
211	12mm thickpre-laminated particle board (decorative lamination on one side and other side balancing lamination) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT- I, IS: 3087 marked, bonded with BWP type syntheticresin adhesive asper IS: 848 and pre-laminatedconformingtoIS:12823,Grade-I,Type-IImarked:
212	Labour Charges for hoisting and fixing trusses/ purlins/ rafters/posts/post- plates or like components including cost ofscrews etc. complete in all sorts of timber.
213	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windowsto be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40 mm thick(Area of opening for panel inserts excluding portion inside grooves or rebates
214	SecondClassteak wood
215	FirstClassdeodar wood
216	SecondClassdeodar wood.
217	FirstClasskail wood
218	SecondClasskail wood
219	Kilnseasoned&chemicallytreatedhollock wood
220	Ply wood 5 ply, 9 mm thick -Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type
221	Decorative ply wood one side decorative veneer and commercial veneer on other face (type 1) conforming IS 1328 BWR type
222	Commercial ply on both sides
223	Plywood 7 ply, 9mm thick- Decorative plywood one side decorative veneer and commercial veneer on other face (Type -I) conforming to IS 1328 BWR type
224	Particle Boad 12mm thick-Plain particleboardflatpressed, 3layer or graded wood particle board medium density Grade I, IS : 3087 marked
225	Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sidesConformingto IS : 3097 grade 1
226	Pre-laminated particle board withdecorative laminationon oneside and balancing lamination on other side, Grade I, Type II IS : 12823 marked
227	Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked
228	MDF boad 12 mm thick -Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 14587
229	12mm thick Coir Veneer Board (conformingtoIS: 14842)
230	Float glass panes 4mm thick glass pane (weighing not less than 10 kg/sqm).2
231	5.0mm thick glass pane (weighing not less than 12.50 kg/sqm)
232	Fly proof stainless steel grade 304 wire gauge with 0.5 mm diawireand 1.4 mm wide aperture with matching wood beading
233	12mm thick Marine plywood conforming to IS: 710
234	12 mm thick Fire retardant plywood conforming to IS: 5509
235	Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture1.4mm in both directions all complete. With Galvanized M.S.Wire gauge with wire of dia 0.63mm. With 2nd class teak wood beading 62x19mm
236	With12mmmildsteelUbeading
237	With stainless steel grade 304 wire gauge with wire of dia 0.50 mm With 2nd class teak wood beading 62x19mm
238	With12mmmildsteelUbeading
239	Providing and fixing glazed shutters for doors,windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws.-35 mm thick Second class teak wood
240	Firstclassdeodar wood
241	Secondclassdeodar wood
242	Firstclasskailwood
243	SecondclassKailwood
244	Kiln seasoned and chemically treated hollock wood
245	Kiln seasoned and selected planks of sheesham wood.
246	Providing and fixing glazed shutters for doors,windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws.- 30 mm thick
247	Second class teakwood
248	First class deodar wood
249	Second class deodar wood
250	First class kail wood
251	Second class Kail wood
252	Kiln seasoned and chemically treated hollock wood
253	Kiln seasoned and selected planks of sheesham wood.
254	Providing and fixing30 mm thickfactorymadelaminatedveneer lumber glazed shutter conformingto IS:14616andTADS 15 :2001 (PartB), using 4mmthick float glass panes for doors, windows and clerestory windows fixing with ISI marked butt hinges of required sizewith necessary screws as per directions of Engineer-in-charge.(Note:-Butt hinges and necessary screws shall be paid separately)
255	Extra for providingheavysheet float glass panes instead of ordinaryfloat glass in glazed doors, windows and clerestorywindow shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5.0mm thick instead of 4 mm thick
256	Extra for providing frosted glass panes 4 mm thick instead of ordinary floatglass panes 4 mm thick in doors, windows and clerestory window shutters.(Area of opening for glass panes excluding portion inside rebate shall be measured)
257	Deduct for providing pin headed glass panes instead of ordinary float glass panes 4mm thick indoors,windows and clerestory window shutters.(Area of opening for glass panes excluding portion inside rebate shall b emeasured).
258	Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws, (Shutter area to be measured).
259	Deduct for not providing hinges indoors, windows and clerestory windows shutters for 2nd class teak wood and other class of wood shutters with:
260	Stainless steel butt hinges with Stainless Steel Screws:
261	ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws
262	Providing and fixing 25 mm thick shutters for cupboard etc, including ISI marked M.S. pressed butt hinges bright finished ofrequiredsize with necessary screws Panelled or paneled and glazed shutters Second class teak wood
263	Firstclassdeodarwood
264	Secondclassdeodarwood
265	Firstclasskailwood
266	Secondclasskailwood
267	Glazed Shutters
268	Secondclassteakwood
269	Firstclassdeodarwood
270	Secondclassdeodarwood
271	Firstclasskailwood
272	Secondclasskailwood
273	MDF board shutters including ISI marked nickel plated bright finished M.S.piano hinges IS:3818 marked with necessary screws complete: Pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked one side decorative and other side balancing lamination, edgestobesealedwithPVCedgebendingtape2.00mmthickofapproved brand.
274	Extra for providing ISI marked Nickel plated bright finished M.S. Pianohinges IS: 3818 instead of IS marked M.S. pressed butt hinges bright finished of required size with necessary screws for cupboard shutters:(shutter area to bemeasured).
275	Extra for providing ISI marked Anodized Aluminium butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws for cupboard shutters. (Shutter area to be measured).
276	Providing and fixing specifiedboard medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)
277	Flat pressed 3 layer particle board or graded wood particle board IS:3087
278	Pre-laminated with decorative lamination on both sides MDF board conforming to IS:14587.
279	Providing and fixing specified pre-laminated medium density board with one side decorative and other side balancing lamination Grade I (exterior grade)in shelves with screws and fittings wherever required, (fittings to be paid separately).
280	Flat pressed 3 layer particle board or graded wood particle boardgrade- I type-II conforming to IS” 3087 edges to be painted with polyurethane primer.
281	MDF board conforming to IS:14587 edges to be sealed with PVC edge bending tape 2.00mm thick of approved brand.
282	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (PartI)decorativetype, coreofblockboardconstruction withframeof1st class hard wood and well matched teak 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters.
283	With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws
284	25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws
285	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
286	With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws
287	25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws
288	Extra for providing and fixing flush doors with decorative veneering instead of non-decorative ISI marked flush door shutters conforming to ISI: 2202 (Part-I) On one side only
289	Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)
290	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge
291	Second class teak wood
292	First class deodar wood
293	Second class deodar wood
294	First class kail wood
295	Second class kail wood
296	Kiln seasoned and chemically treated hollock wood
297	Kiln seasoned and selected planks of sheesham wood
298	Extra for using stainless steel grade 304 wire gauge with wire of dia. 0.5 mm instead of Galvanized M.S. Wire gauge with wire of dia. 0.63 mm for doors, windows and clerestory windows with necessary screws: (shutter area to be measured)
299	Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS 14616 and as per TADS 15:2001( Part B) using galvanized wire gauze with average width of aperture 1.4mm in both direction with wire of dia 0.63mm as per IS: 1568 for doors, windows and clerestory windows, including ISI marked MS pressed butt hinges bright finished of required size with necessary screws, as per direction of engineer in charge
300	Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:
301	2nd class teak wood
302	50 x 12 mm
303	50x20mm
304	2nd class deodar wood
305	50 x 12 mm
306	50 x 20mm
307	2nd Class Kail wood
308	50 x 12 mm
309	50 x 20mm
310	Budloo / Fir wood
311	50 x 12 mm
312	50 x 20mm
313	Kiln seasoned and chemically treated hollock wood
314	50 x 12 mm
315	50 x 20mm
316	Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with
317	Second class teak wood
318	First class deodar wood.
319	Second class deodar wood.
320	First class kail wood.
321	2nd class kail wood
322	Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked including top cover of 6mm commercial ply wood conforming to IS :303 BWR grade, nickel plated M.S. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100mm x 40mmx40 mm on both inner side of pelmet and rawl plugs 75mm long etc. all complete.
323	Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842-2000, including top cover of 6mm coir veneer board, nickel plated M.S. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100mm x 40mmx40 mm on both inner side of pelmet and rawl plugs 75mm long etc. all complete.
324	Extra for using veneered particle board conforming to IS: 3097 Grade I, in item of pelmet 18mm thick 150mm wide
325	Non decorative Veneer on both sides
326	Particle board with decorative veneering on both sides.
327	Providing and fixing teak wood lipping of size 25x3mm in pelme
328	Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete
329	12mm dia
330	20mm dia
331	25mm dia
332	Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets
333	20mm dia (heavy type)
334	25mm dia (heavy type)
335	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.
336	Fixed to steel windows by welding
337	Fixed to openings / wooden frames with rawl plugs screws etc
338	Providing and fixing expanded metal 20x60mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62x19 mm beading of 2ndclass teak wood and priming coat with approved steel primer all complete.
339	Providing and fixing hard drawn steel wire fabric 75x25mm mesh of weight not less than 7.75 kg/sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete..
340	Deduct for fixing 75x25mm hard drawn steel wire fabric of weight not less than 7.75 kg. persqm in panelled and glazed door and window shutter insteadof glass sheet 4mm thick.
341	Providing 40x5mm flat iron holdfast 40cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
342	Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with :
343	Salwood
344	Second class deodar wood
345	Second class kailw ood
346	Hollock wood
347	Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :
348	125x65x2.12mm
349	100x58x1.90mm
350	75x47x1.70mm
351	50x37x1.50mm
352	Providing and fixing IS:1341 marked M.S.heavy weight-Butt Hinges with necessary screws etc.,complete:
353	125x90x4.00mm
354	100x75x3.50mm
355	75x60x3.10mm
356	50x40x2.50mm
357	Providing an dfixing ISI marked oxidized M.S .pressed butt hinges with necessary screws etc. complete:
358	125x65x2.12mm
359	100x58x1.90mm
360	75x47x1.70mm
361	50x37x1.50mm
362	Providing and fixing ISI marked oxidized M.S .pressed parliamentary hinges with necessary screws etc. complete:
363	150x125x27x2.80mm
364	125x125x27x2.80mm
365	100x125x27x2.80mm
366	75x100x20x2.24mm
367	Providing and fixing ISI marked oxidized M.S. spring hinges with necessary screws etc. complete:
368	SingleActingSpringhinge
369	150mm
370	2125mm
371	3100mm
372	DoubleActingSpringhinge
373	1150mm
374	.2125mm
375	3100mm
376	Providing M.S.PianohingesISImarkedIS:3818finished with nickelplating and fixing with necessary screws etc., complete.
377	Over all width 35mm
378	Over all width 50mm
379	Over all width 65mm
380	Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete :
381	300x16mm
382	250x16mm
383	Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.
384	250x10mm
385	200x10mm
386	150x10mm
387	100x10mm
388	Providing and fixing ISI marked 85 mm x 42 mm oxidized M.S. pull bolt lock conforming to IS:7534 with necessary screws, bolts, nut and washers etc. complete.
389	Providing and fixing ISI marked oxidized M.S. door latches conforming to IS :5930 with screws etc. complete :
390	300x20x6mm
391	250x20x6mm
392	Providing and fixing ISI marked oxidized M.S.handles conforming to IS:4992 with necessary screws etc. complete :
393	125mm
394	100mm
395	Providing and fixing oxidized M.S. hasp and staple (Safety type) conforming to IS : 363 with necessary screws etc. complete :
396	150mm
397	115mm
398	Providing and fixing oxidized M.S.casement stays (straight peg type) with necessary screws etc. complete.
399	300 mm weighing not less than 200 gms.
400	250mmweighingnot lessthan150gms.
401	200mmweighingnot lessthan120gms.
402	Providing and fixing oxidized M.S.Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.)
403	Providing and fixing ISI:12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete.
404	125x64x1.90mm
405	100x58x1.90mm
406	75x47x1.80mm
407	50x37x1.50mm
408	Providing and fixing ISI:12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete.
409	125x64x2.50mm
410	100x60x2.50mm
411	75x50x2.50mm
412	Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :
413	125x85x5.5mm(heavytype)
414	125x70x4mm(ordinarytype)
415	100x85x5.5mm(heavytype)
416	100x70x4mm(ordinarytype)
417	75x65x4mm(heavytype)
418	75x40x2.5mm(ordinarytype)
419	50x40x2.5mm(ordinarytype)
420	Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete:
421	150x125x27x5mm
422	125x125x27x5mm
423	100x125x27x5mm
424	75x100x20x3.2mm
425	Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :
426	250x10mm
427	200x10mm
428	150x10mm
429	100x10mm
430	Providing and fixing bright finished brass door latch with necessaryscrews etc. complete. :
431	300x16x5mm
432	250x16x5mm
433	Providing and fixing bright finished brass 100mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
434	Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.
435	Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete.
436	Providing and fixing special quality bright finished brass cup board or wardrobe locks with four levers of approved quality including necessary screws etc. complete:
437	Providing and fixing 50mm bright finished brass cupboard or wardrobe knob of approved quality with necessary screws.
438	Providing and fixing bright finished brass handles with screws etc. complete:
439	125mm
440	100mm
441	Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete
442	Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35kg and door width upto700mm),with necessary accessories and screws etc. complete:
443	Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc.complete:
444	Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete.
445	Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete.
446	300mm weighing not less than 330gms.
447	250mm weighing not less than 280gms.
448	200mm weighing not less than 240gms.
449	Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete :
450	150mm
451	115mm
452	Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
453	Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc.complete.
454	Providing and fixing special quality chromium plated brass cupboard locks of approved quality with six levers including necessary screws etc. complete :
455	Providing and fixing chromium plated brass 50mm cupboard or wardrobe knobs with nuts complete.
456	Providing and fixing chromium plated brass handles with necessaryscrews etc. complete :
457	125mm
458	100mm
459	Providing and fixing chromium plated brass casement window fastener with necessary screws etc.complete.:
460	Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete.
461	300mm weighing not less than 330gms
462	250mm weighing not less than 280gms.
463	200mm weighing not less than 240gms.
464	ANODIZED ALUMINUM FITTINGS(All fittings shall be ISI marked)Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
465	125x75x4mm
466	125x63x4mm
467	100x75x4mm
468	100x63x4mm
469	100x63x3.2mm
470	75x63x4mm
471	75x63x3.2mm
472	75x45x3.2mm
473	Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
474	300x16mm
475	250x16mm
476	Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
477	300x10mm
478	250x10mm
479	200x10mm
480	150x10mm
481	100x10mm
482	Providing and fixing aluminum pull bolt lock anodized ISI marked (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws bolt nuts and washers etc. complete.
483	Providing and fixing 50 cm long aluminum kicking plate of size 100x3.15 mm, anodized (anodic coating not less than grade AC 10 as per IS : 868),transparent or dyed to required colour or shade with necessary screws etc. complete.
484	Providing and fixing aluminum handles ISI marked anodized (anodic coatingnot less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
485	125mm
486	100mm
487	150mm
488	Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessaryscrews etc. complete :
489	Single rubber stopper
490	Twin rubber stopper
491	Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
492	Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked,with six levers and a pair ofanodized (anodic coating not less than grade AC10 as per IS: 1868) aluminum lever handles of approved quality with necessary screws etc.complete.
493	Providing and fixing aluminum tee channels (heavy duty) with rollers,stop end in pelmets as curtain rods.
494	Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at thespacing of 610 mm centreto centre with dash fastener of 12.5 mm diameter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs48mm wide having one flange of 34mm and other flange 36mm and 0.50mm thick fixed vertically with in flanges off loor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs atspacingof 450 mm centre to centre, and fixing of boards to both side of framework by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners(25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and direction of engineer in charge all complete.
495	75mm overall thickness partitions with 12.5 thick double skin fire rated Glass Reinforced Gypsum (GRG), plaster board confirming to IS : 2095 (Part 3) 1996 (Board with BIS Certification marks)
496	75mm over allthickness partitions with 12.5mmthickdoubleskin tapered edgePlain Gypsum plaster Board confirming to IS : 2095 (Part I) 2011(Board with BIS Certification marks)
497	66mm over all thickness partitions with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materialsreinforced with cellulose fiber manufactured through autoclaving process with compressive strength 225 kg /sq.cm, Bending strength 100kg/sq.cm
498	66mmover allthicknesspartitionsusing8mmthickdoubleskinnon asbestos multipurpose cement board reinforced with cellulose fiber manufactured through autoclaving process (high pressure steam cured) as perIS: 14862with suitable fiber cement screws
499	66mm overall thickness partition using 8 mm thick double skin multi purpose cement bonded wood particle board manufactured as per IS:14276 with suitable cement bonded board screws
500	Providing and fixing PTMT handles with necessary screws etc. Complete

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Annual Maintenance Contract By Way Of Civil Repairs Of Various Dwelling Of Estates Department For, Fair View Guest House, Nehru Helipad Section) At Gupkar, Srinagar For The Year 2026-27., Srinagar-Jammu And Kashmir

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Annual Maintenance Contract By Way Of Civil Repairs Of Various Dwelling Of Estates Department For, Fair View Guest House, Nehru Helipad Section) At Gupkar, Srinagar For The Year 2026-27., Srinagar-Jammu And Kashmir

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us