|
| 1 | Hire charges for providing internal barricading arrangements in counting halls. The main poles shall be provided for height of 3.60m at an interval of 150cm c/c using 75mm x75mm MS Square Hollow section as vertical members and providing 45mm x45mm MS Square Hollow section as horizontal members at an interval of 120cm c/c to a height of 3.60 m protect unauthorised entry into the counting halls. Including Labour charges for fixing, welding and transporation charges etc., complete ( Hire charges only) |
| 2 | Labour and Hire charges for external barricadding arrangements using Vertcal post of casurina poles 13cm to 15cm dia and 60cm below ground level 3.00m above fixing 10 horizontal in 9 ties and lowest sould be 45cm above ground level and tied with new coir ropes provided in all places and removing the same after te election counting is over. (Hire Charges only) For 10m |
| 3 | Labour and hire charges for providing external barricading arrangements using Vertical post of casurina poles 13cm to15cm dia and 60cm below Ground level and 2.10m above fixing 8 horizontal in 2 ties and lowest should be 45cm above ground level and tied with new coir ropes provided in all places and removing the same after the function is over (Hirecharges only) For 10m |
| 4 | Providing weld mesh of opening size 2.50cm x 2.50cm in counting hall to protect unauthorised entry into the counting halls, The rate includes cost of all materials labour charges transportation, loading and unloading charges all taxes etc., complete complying with standard specification and as directed by the departmental officers. ( Hire charges only) |
| 5 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 6 | Dismantling, clearing away and carefully stacking materials useful for re-use of brick work in cement mortar walls under 3.00 m high in all floors and for every additional 3m part three of over the initial height of 3m etc.,complete |
| 7 | Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 9\\" x 4 3/8\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 8 | For Superstructure In Ground Floor |
| 9 | For Superstructure In First Floor |
| 10 | Plastering the surface of walls with Cement Mortar 1:5 (One cement and Five M-sand), 12mm thick with mortar Plasticizer at 200ml per 50Kg of cement used in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 11 | Supplying and fixing of unbreakable dust free, easy to erase, class Room Writing Board made up of 8mm thick green colour ceramic sheet pasted on the front side 12mm thick ply board and backside of ply board is pasted with flex board sheet. The outer beading of the writing board will be fixed with aluminium Hi section of size 25mm. The board will be fixed firmly on the wall using 3 inch screws. The rate includes cost of all materials labour charges transportation, loading and unloading charges all taxes etc., complete complying with standard specification. |
| 12 | Providing for 19mm thick exterior grade PLY WOOD board for closing the window and doors and the board will be fixed firmly on the wall using 3 inch screws. The rate includes cost of all materials labour charges transportation, loading and unloading charges all taxes etc., complete complying with standard specification and as directed by the departmental officers.( Hire charges only). |
| 13 | Providing Teak wood reepers of a size 0.05mx0.020m nailing to the door frames and removing the same after counting is over and the rate includes cost of all materials labour charges transportation, loading and unloading charges all taxes etc., complete complying with standard specification and as directed by the departmental officers. ( Labour Charges only) |
| 14 | Hire charges for ply wood Stage using 25 mm thick waterproof plywood both side vertically and horizondally at 60 cm C/C intervals at top 0.50 m height and top fixed with 25 mm green ply water proof commercial ply wood and top fixed with best quality and approved variety and any colour of water proof mica sheet including cost of nails, fevical, paste, labour charges for fixing of wall panelling with neatly finishing and cost of all materials etc., complete complying with standard specification. |
| 15 | Painting two coats of Old plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 16 | Painting old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard Specifications. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 17 | Painting old wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard Specifications. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 18 | Writing the poling station numbers and marking the box of sizes 0.30m x 0.60m for storing the EVMs as supplied by the Revenue Department. The rate including artists charges, paints,etc.,complete as directed by the departmental officers. |
| 19 | Renewing and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 20 | Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (without Pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 21 | Supplying and fixing inposition Indian make white glazed earternware lipped mouth flat back urinal of approved quality with G.I pipe connection to suitable length,32mm bekk mouthed PVC connection,15mm dia G.M wheel value,fixing the urinal to the wall inposition with necessary T.W plugs, clamps, screws shellac etc., including dismantling masonry if necessary and redoing the same to original condition fixing the 15mm dia G.I pipe connection & wheel valve,painting the pipe with two coats of approved paint over one coat of primer & checked without any leakage complete complying with standard specifications [The urinals should be got approved by the Executive Engineer before use on works] |
| 22 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 23 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 24 | Renewing and fixing best approved best quality CP soap dish of size 150mm x 150mm x 50mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 25 | Renewing and fixing in position 15mm dia CP Two Way Bib Cock with Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 26 | Renewing and fixing in position 15mm dia brass CP screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 27 | Hire charges for Temporary shed arrangements sides of stage, panddal using of G.I. sheet fixing in casurina poles of size 13cm, to 15cm in vertical and 10cm to 13cm dia casurina poles in horizontal and 8-10cm dia casurina poles middle height 6m with nails, coir rope of stage using G.I. corrugated sheet etc. removing the same after the Countingn is over. |
| 28 | Providing Watch Tower of size 1.80m x 1.80m to a height of 6.60m from the Ground level and 1.00m below the ground level using vertical post of 10cm to 13cm dia 6Nos and cross bracings alround the tower 8cm to 10cm dia at 1.50m centre to centre and internal cross bracings diagonally with 10cm to 13cm dia casurina props and the bottom standing coved with 40mm thick country wood plangs tied with coir ropes ,nails etc., and the roof top covered with mild steel sheet tied with 8cm to 10cm casurina props at 90cm centre to centre ,and the steps provided with 60cm width to a height of 6.60m with 3 Nos of mid landing portion and two sides of 80cm height handrails using the steps runner of 8cm to 10cm casurina props and fixed with 5cm to 8cm dia casurina props steps at 30cm centre to centre and tied with coir ropes and nails etc., The rate includes cost of all materials labour charges transportation, loading and unloading charges all taxes and the retrieved materials should be taken by the contractor after the function is over etc., complete complying with standard specification and as directed by the departmental officers.( Hire charges only). |
| 29 | Providing GI Sheet 0.8mm thick ( 22 gauge) fixed on the existing external barricading using nails and coir for tying the sheets The rate includes cost of all materials labour charges transportation, loading and unloading charges all taxes and the retrieved materials should be taken by the contractor after the function is over etc., complete complying with standard specification and as directed by the departmental officers.( Hire charges only). |
| 30 | Hire charges for JCB the rate includes cost of diesel, driver betta and transportation to the site etc., complete. (Hire charges only) |
| 31 | Hire charges for providing water proofing shamiyana and sides covered the same cloth as per standard specification as directed by the departmental officers etc., complete as directed by the departmental officers. |
| 32 | Hire charges for providing steel table for the function. The rate includes conveyance, spreading of table as directed by the departmental officers and recollecting the same after the function is over. |
| 33 | Labour and hire charges for providing arrangements of stage enclosure using Table side decoration colour and white cloth one layer of and removing the same after the function is over. ( Hire charges only) |
| 34 | Hire charges for providing arrangements of stage enclosure using side decoration colour and white cloth one layer of and removing the same after the function is over.. ( Hire charges only) |
| 35 | Hire charges for providing arrangements of stage enclosure using side decoration colour and white cloth one layer of and removing the same after the function is over.. ( Hire charges only) |
| 36 | GST @ 18 % Please Enable Macros to View BoQ information |
