|
| 1 | Providing and fixing Ist quality glazed ceramic wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand). The tiles are to be fixed by provding 3 mm thick spacer. The grooves are to be filled with cemenitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire statisfaction of Engineer-in-Charge. Size of tile 600 x 1200 mm |
| 2 | Providing and fixing 60 mm thick high density rubber moulded precast cement concrete paver block grey/ colored/ polished/ designer (manufactured by vibro hydraulic pressure process) consisting of design mix of cement, sand and fine aggregate having designation M35 ISI marked including the cost of good quality color and hardening agents. The paver should be compiled with tensile strength and breaking load as per BIS 6717-1993 and shall be tested against resistance to bear as per IS 1237-1980 (specification for cement concrete floor tiles). The paver should be laid over layer of 25 mm average thick screened coarse sand to the required slope and filling the joints with fine sand complete in all respects and to the entire satisfaction of Engineer in charge. |
| 3 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4(1 cement :4 coarse sand) |
| 7 | Providing and fixing 15 to 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (GRANITE). |
| 8 | Steel work in built up frame made of / M.S. flat / M.S. pipe / M.S. angles of various sections including cutting, hoisting fixing in position and applying a priming coat of approved steel primer and two coats of snthetic enmael paint, welded and bolted including special shaped washers etc.. The work is required for making security wall jaffery/ ladder/grills/ frame work for shed or sunshade / other mis work.The steel work is to be provided at the site of the building complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 9 | Providing and fixing 1.5mm thick polycarbonate sheet to be fixed on the existing MS frame with self drilling machine screws complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 10 | Providing and fixing main entry gate 5'-11\\" high (paint finish) consisting of shesham wood battens of size 5'-11\\" x 6\\" x 3/4\\" vertically, including making grooves for interlocking, with the help of M.S. nuts and bolts including paintng two coats of synthetic enamel paint over one coat of wooden primer, on the existing M.S. frame completely fixed in position in all respect to the entire satisfaction of Engineer-in-charge. |
| 11 | Providing and fixing 1.0 mm thick mica (Formica, Kit, Archid or tis equivalent) of approved shade and quality on commercial surface fixed in position by means of fevicol and nails etc. for making cupboard (As per sample approved by the allottee) complete in all respect to the entire satisfaction of Engineer in Charge NS |
| 12 | Providing and fixing 6mm thick commercial ply (ISI marked) on the exisitng wooden members including the cost of nails, fevicols etc. including painting two coats of synthetic enamel paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 13 | Providing and fixing of plyboard consisting of 18 mm thick commercial ply(ISI marked) phenol bonded fixed with hard wood battens and gutties for making cupboard including the cost of necessary lipping screws, nails, fevicol complete in all respect and to the entire satisfaction of the Engineer in charge. N.S |
| 14 | Providing and fixing 4mm thick teak ply (ISI marked) with exisitng wooden members for making cupboard including the cost of nails, fevicols etc. including spirit polish complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 15 | Providing and fixing of PP sheet behind the cupboards for prevention of termite infection and exisitng wooden members including the cost of nails, fevicols etc. complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 16 | Providing and fixing stainless steel finish tower bolts (barrel type) of size 250x 10mm with necessary s.s. screws etc. complete in all respect and to the entire satisfaction of the Engineer in charge |
| 17 | Providing and fixing stainless steel finish handles of size 125mm with necessary s.s. screws etc. complete in all respect and to the entire satisfaction of the Engineer in charge |
| 18 | Providing and fixing 150 mm stainless steel finish floor door stopper with rubber cushion, necessary s.s. screws etc. to suit shutter thickness complete in all respect and to the entire satisfaction of the Engineer in charge |
| 19 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 20 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 21 | Providing and fixing 1 1/2\\" x 3/4\\" moulding for door frame vertically and horizontally, with the help of fastener, screws and nails including spirit or malamine polish after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 22 | Providing and fixing 28mm thick wooden or stainless steel finish metallic drapery pipe including wooden brackets etc. complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 23 | Providing and fixing 8mm thick toughened glass over fixed portion or glazed shutter including the cost of nails, putty etc. complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 24 | Providing and fixing 8mm thick wooden laminated floor class of use 31/23 having wear resistance level of AC-4 as per EN-13329 with a direct pressure laminate surface including profile, treated with aluminium side, flooring of approved colour and shade complete in all respects and to the entire satisfaction of the Engineer in charge. |
| 25 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
