|
| 1 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.B.C.D. S.O.R. Item No. 5.10.1 |
| 2 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).B.C.D. S.O.R. Item No. 5.3.11 |
| 3 | 8mm dia bar - |
| 4 | 10mm dia bar - |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metresD.S.R. Item No. 15.12.2 |
| 6 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top coverD.S.R. Item No. 10.6.1 |
| 7 | Supplying, fitting and fixing 20 guage G.C.I. sheet gate fitted on M.S. angle frame of size 60x60x6mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.29 |
| 8 | Supplying, fitting, and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.12 |
| 9 | Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20x6mm M.S. flat or 16mm M.S. square bars fitted on 25x25x6mm M.S. angle frame of size 60x60x6mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.30 |
| 10 | Providing angle as per I.S. 226(iii) 75 x 75 x 8 mm (Gr. A)B.C.D. S.O.R. Item No. M-195 (b)Front Chajja Support |
| 11 | Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, Channel, Angle, Tee, Flat, Plate, Latice Member, Built up Compound Section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding ( machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.28 |
| 12 | Supply of G.C.I. Sheet (thickness in mm)(v) 0.35mm thickB.C.D. S.O.R. Item No. M-195 (f)Mumty Roof -Front Chajja |
| 13 | Labour for fitting and fixing G.C.I. or C.A. Sheet roofing in proper slope including the cost of \\"J\\" or \\"L\\" hooks, limpet and bitumen washers, carriage of sheet to work site, and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.9.10 |
| 14 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l.B.C.D. S.O.R. Item No. 5.7.3 |
| 15 | Providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls, scaffolding , curing and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.23 |
| 16 | Earth work in excavation in foundation trenches in ordinary soil -do- -do- complete as per building specification and direction of E/I. |
| 17 | Providing sand filling in foundation trenches -do- -do- all complete job as per specification and direction of E/I. |
| 18 | Providing 75B brick flat soling -do- -do- all complete job as per specification and direction of E/I. |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 20 | Providing 75B brick work in C.M. (1:6) in foundation and plinth -do- -do- all complete job as per specification and direction of E/I. |
| 21 | Providing 12mm thick C.P. (1:6) with 1.5mm thick cement punning -do- -do- all complete job as per specification and direction of E/I. |
| 22 | Earth work in excavation -do- -do- all complete job as per specification & direction of E/I. |
| 23 | Supply of fine agreegate/stone dust -do- -do- all complete job. |
| 24 | Labour for compaction -do- -do- all complete job. |
| 25 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin-Charge.80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. |
| 26 | Carriage of materials Sand |
| 27 | Cement |
| 28 | Stone chips |
| 29 | steel |
| 30 | Stone Dust |
| 31 | Earth |
| 32 | Brick |
| 33 | G.S.T @ 18% |
| 34 | Labour Cess 1% Please Enable Macros to View BoQ information |
