|
| 1 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa and AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of single layer Mangalore pattern or similar tiles complete all as specified and as directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based crumpled corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa and AZ-150 as in ridge fixed with self tapping screws including dismantling of single layer Mangalore pattern or similar tiles complete all as specified and as directed. |
| 3 | Dismantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed works complete all as specified and as directed. |
| 4 | S&F for Structural steel work conforming to Fe-290 Gde E-165 Roof trusses (framed), trussed,rafters, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified and as directed. |
| 5 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed. |
| 6 | M&L for PCC(1:2:4) type B-1 (using 20mm graded stone aggregate) as in surface channel in drains including demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for as in coping, drains complete all as specified and as directed. |
| 7 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and as directed. |
| 8 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm & n exc 4 sqm each complete all as specified and as directed. |
| 9 | S&F Structural Steel work conforming to Fe-290 Gde E-165 as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, incl 1 mm thick mild steel, plain sheet , cut to size,drilled, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, sliding bolts and fixing complete all as specified and as directed. |
| 10 | S&F Structural Steel work conforming to Fe-290 Gde E-165 Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases,splices etc. built up from two or morebeam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc. complete all as specified and as directed. |
| 11 | S & F Pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 12 | S & F Pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 13 | Cutting holes in stone walls built in cement mortar or cement lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 complete, depth of embedded portion of hold fasts not exc half brick complete all as specified and as directed. |
| 14 | M&L Cement Concrete type C-0 (1:3:6) using 12.5mm graded aggregates as in filling in pressed steel chowkhat, fixing of hold fast etc complete all as specified and as directed |
| 15 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed. |
| 16 | S&F factory made 35mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size ofrail and stile as per IS : 1003 (Part I), kiln seasoned andchemically pressure treated complete all as specified and as directed. |
| 17 | S&F factory made 2nd Class Hardwood 35 mm thick glazed and skeleton shutters open rebated & prepared to receive glass, gauge etc without sash bars edges & mitred beads for securing glass/gauge etc complete all as specified and as directed. |
| 18 | S&F Steel windows box type/Z type or as approved by Engr in Charge with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed |
| 19 | Ditto, but without glazing bars. |
| 20 | S&F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe - 290 Gde E - 165 complete all as specified and directed. |
| 21 | S&F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed. |
| 22 | S&F of Stainless steel wire cloth, 0.36mm normal dia of wire and avg. width of aperture 1.40 mm and fixed with stinless steel wire staples complete all as specified and directed. |
| 23 | S&F 100mm butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed |
| 24 | S&F 150 mm aluminium anodised, barrel tower bolts of extruded section all as specified and as directed |
| 25 | S&F 150mm extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed |
| 26 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. |
| 27 | S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening complete all as specified and as directed. |
| 28 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 29 | S&F 100mm butt hinges, aluminium anodised of extruded section complete all as specified and as directed |
| 30 | S&F 100 mm aluminium anodised, barrel tower bolts of extruded section all as specified and as directed |
| 31 | S&F 100mm extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed |
| 32 | S&F in repairs block boards grade 2 quality 18/19mm thick interior grade with decorative face both side, interior grade, commercial type, fixed with screw to timber frame work for cupboard shutter, shelf etc complete all as specified. |
| 33 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps 30mm complete all as specified and as directed |
| 34 | S&F in repairs curtain rails 25mm, mild steel, chromium plated with fixing brackets,stops, rollers etc. all as specified and directed. |
| 35 | M&L for preparation of new wood or wood based surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 36 | M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide complete all as specified and directed. |
| 37 | M&L machine cut cudappah stone slab 20-25mm thick polished one side laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl incl rubbing and polishing and demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded complete all as specified and as directed. |
| 38 | M&L for granite (of any type) work (table rubbed and polished)of 14-16 mm th as in steps, jambs, pillars, window-cills, cooking platforms and like laid over cement screed of 10mm th in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing stone slab and tiles of any description or th in floors , aprons etc |
| 39 | M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in concrete bed including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed. |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and directed |
| 41 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 and complete all as specified and as directed. |
| 42 | M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 and complete all as specified and as directed. |
| 43 | All as above here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 44 | M&L for glazed ceramic tiles coloured of size 350x250x7mm/ 450x350x7mm thick fixed in vertical surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match incl 10mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 45 | M&L in repairs 8-9mm thick designer ceiling board in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified and as directed. |
| 46 | M&L in repairs for 75mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement including forming of joints 03mtr and joint filled with bitumin and sand mixture in 1:1 ratio complete including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed. |
| 47 | M&L for 75mm PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection even and smooth without using extra cement including forming of joints 03mtr and joint filled with bitumin and sand mixture in 1:1 ratio including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed. |
| 48 | M&L for 100mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using extra cement including forming of joints 03mtr and joint filled with bitumin and sand mixture in 1:1 ratio including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed. |
| 49 | Demoltion of brickwork or stone/ boulder masonry, built incement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 50 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed. |
| 51 | M&L for Brick work with fly ash bricks straight or curved on plan exc 6m in radius but built in 1:6 cement mortar complete all as specified and as directed. |
| 52 | Taking down cement plaster of any description on brick/ Stone Walls or from Concrete Surfaces incl raking out joints, hacking for key, scrubbing down with water etc all as specified and removing unserviceable material outside premises complete all as specified and as directed. |
| 53 | M&L for rendering 10 mm thick in CM 1:6 on faces of brickwork, stonework or concrete surfaces (internal), finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 54 | M&L for 15mm thick rendering in two coats on stone/ brick/ concrete surfaces (external) finished even and smooth without using extra cement etc. 1st coat 10 mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mix with water proofing compound as per manufacturer instructions complete all as specified and as directed. Note : WPC shall measured and paid Seprately |
| 55 | M&L for 20mm thick rendering in two coats on stone/ brick/ concrete surfaces (external) finished even and smooth without using extra cement etc. 1st coat 15 mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mix with water proofing compound as per manufacturer instructions complete all as specified and as directed. Note : WPC shall measured and paid Seprately |
| 56 | Supply only Integral water proofing Compound |
| 57 | M&L preparation of new or old plastered/unplastered surfaces of wall and applying two coats of oil bound distemper over coat of wall care putty on new plastered surfaces of wall complete all as specified and as directed. |
| 58 | M&L for preparation of new or old plastered/unplastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed. |
| 59 | M&L for preparation of old plastered/unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed. |
| 60 | Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed for the size of 15 mm dia bore. |
| 61 | All as per item Ser No 60 above but for 20 mm dia bore |
| 62 | Supplying, fixing, jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed for the size of 15 mm dia bore. |
| 63 | All as per item Ser No 62 above but for 20 mm dia bore |
| 64 | Fixing only old steel tubing and connections obtained from taking down against item No 60(a) & (b) herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings for the size of 15 mm dia bore. |
| 65 | All as per item Ser No 64 above but for 20mm dia bore |
| 66 | Cutting holes into or through stone walls built in cement mortar or cement lime mortar and walls of cement concrete with superficial area n exc 150sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required |
| 67 | S&F in repairs rotational moulded polyethylene water storage tank tripple layered (cylindrical vertical with closed top) hoisted and fixed in position of 500 litres capacity confiring to IS specification, incl 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and as directed. |
| 68 | S&F in repairs for vitreous china wash basin white flat back, size 580x450mm incl brackets, cutting for and pinning in ends of brackets or erecting stand, incl 32mm waste coupling of PTMT (half or full threaded) and waste pipe complete all as specified and as directed. |
| 69 | S&F in repairs stainless steel sinks with drainage board made of 1mm thick for kitchen with plugs washer, waste pipes, cast iron cantilever brackets, connecting union to pipe of overall size 915mm x 460mm, bowl size 410 x 330 x 160 mm with glossy finish, including bedding in cement mortar to dwarf wall fixing cantilever brackets and connecting unions to pipe incl 40mm waste coupling of PTMT (half or full threaded) and waste pipe complete all as specified and as directed. |
| 70 | S&F in repairs Vitreous China squatting pan, ' Orissa pattern, size 580 x 440mm white, with intergal foot rest (excluding flushing cistern and flush pipe) with complete water closet (Squatt pattern) including provision of lime concrete bedding complete all as specified and as directed. |
| 71 | S&F in repairs PVC valveless, syphonic action type, 10 ltrs capacity flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and as directed. |
| 72 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 73 | S&F in repairs CP soap dish approximate size 160x160x90mm complete all as specified and as directed. |
| 74 | S&F in repairs 15 mm dia fancy type, pillar taps cast copper alloy with capstan head chromium plate screwed dwon high pressure long shank and fly nut screwed for iron pipecomplete all as specified and directed. |
| 75 | S & F in repairs 15mm bore stop valve, fancy type, chromium plated cast copper alloy screwed down, high pressure, with long shank and cub (concealed type) with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed . |
| 76 | S&F in repairs 15mm bore dia of stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 77 | S&F in repairs bib taps 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 78 | S&F in repairs 20mm bore gun metal gate valves, with iron wheel head , screwed both ends for iron pipes complete complete all as specified and as directed. |
| 79 | S&F in repairs chromium plated shower rose 125mm size complete all as specified and as directed. |
| 80 | S&F in repairs 600x450mm bevelled edge mirror of selected guantity glass, moulded on 6mm thick AC building board or commercial plywood and fixed to wooden pluges with cromium plated srews and cup washers complete all as specified and as directed. |
| 81 | S&F in repairs tubular towel rail aluminium anodised, 20mm dia, D type 60 cm long between flanges complete all as specified and as directed. |
| 82 | S&F in repairs CP grating 110mm. |
| 83 | S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed. |
| 84 | S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed. |
| 85 | S&F in repair PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed. |
| 86 | Ditto but of 110mm bore complete all as specified and as directed. |
| 87 | Cleaning of 100mm bore dia of pipe of Sewage Line and Connected Manholes of any length from WC to manhole, manhole to manhole, Manhole to Septic Tank, Septic Tank to Soakwell by roding and well flushing after cleaning and removing mud etc to in pits complete all as specified and as directed |
| 88 | Cleaning of 150mm bore dia of pipe of Sewage Line and Connected Manholes of any length from WC to manhole, manhole to manhole, Manhole to Septic Tank, Septic Tank to Soakwell by roding and well flushing after cleaning and removing mud etc to in pits complete all as specified and as directed |
| 89 | Taking down carefully concealed/casing capping point wiring copper/aluminium(light/fan/socket) complete (with fittings such as switches ceiling rose, pendents, regulators,sockets etc) and making good disturbed surface with existing specification all as specified and directed by Engineer-in-Charge. |
| 90 | Material and labour for point wiring complete with 1.5 sqmm single core sheathed PVC insulated FRLSH cable 1100 V grade multistranded copper conductor of code red, blue and yellow for phase, black for neutral and green for earth of ISI marked drawn through and including PVC casing caping of suitable size with accessories ISI marked on wall/ceiling including PVC insulated copper cable FRLS 1100 V grade multi stranded for earth continuity conductor of same type and size and connected to earth dolly including provision of MODULAR boxes of suitable size MODULAR boxes,cover plate for mounting switches/sockets and regulators complete all as specified and as directed for One light point controlled by one switch one way. |
| 91 | All as per item Ser No 90 above for One Ceiling fan/ Exhaust fan point controlled by one switch one way |
| 92 | All as per item No 90 but one bell/buzzer point controlled by one push button on the same board with other swiches or independent with 1.5 sqmm size. |
| 93 | All as per item No 90 But Using 2.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable for 3 pin 6 Amp socket outlet controlled by one switch on same board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and directed . |
| 94 | All as per item No 2.00.. But Using 2.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable for 3 pin 6 Amp socket outlet controlled by one switch on independend board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and directed . |
| 95 | All as per item No 90 But Using 4 sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable for 3 pin 16 Amp socket outlet controlled by one switch on independend board with 4 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and directed . |
| 96 | M&L Modular switch one way, 6 Amps, 240 V complete all as specified and directed |
| 97 | S&F modular socket outlet 2/3 pin type,6 Amps, 240 V complete all as specified and directed |
| 98 | S&F socket outlet modular but 6A/16A flush,2 module type complete all as specified and as directed. |
| 99 | S&F switch modular 15/16A complete all as specified and as directed. |
| 100 | S&F in replacement lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed |
| 101 | S&F call bell electrical operated complete all as specified and as directed |
| 102 | S&F fan regulator modular type 120w 2 module complete as specified and directed. |
| 103 | S&F bell switch modular type complete all as specified and directed. |
| 104 | S&F ceiling rose surface type with 3 terminals complete . |
| 105 | Taking down carefully submain wiring including batten/conduit by unscrewing from wall, ceiling and making good surfaces to match with original status as specified and directed Please Enable Macros to View BoQ information |
| 106 | Taking down carefully submain wiring including batten/conduit by unscrewing from wall, ceiling and making good surfaces to match with original status as specified and directed Please Enable Macros to View BoQ information |
