|
| 1 | BOQ ITEM NO. 01 TO 22 COMMON FOR JOBS Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete . |
| 2 | M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete, all as specified. |
| 3 | Ditto all as above but except bricks ( bricks recovered from demolition to be used) |
| 4 | M&L for Plastering by using ready mix mixture of thickness 15 mm thick with water proofing liquid and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-Charge. |
| 5 | Repair to plaster by using readymix mixture of thickness 10 mm and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-Charge |
| 6 | Repair to plaster by using readymix mixture of thickness 7 mm and taking down cement or cement lime plaster, raking out joints and preparing plastering the Celing surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-Charge |
| 7 | Preparation of plastered surfaces and applying two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, over a coat of 2mm thick putty and primer of required shade and colour complete, as per manufacturer's specification over Complete all as specified and directed |
| 8 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 9 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area exc 1.5 Sqm but n.exc 4 sqm each all as specified. |
| 10 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area n.exc 1.5 Sqm each all as specified. |
| 11 | S&F 65x100 mm single rebated factory made 100% solid WPC (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed. |
| 12 | S&F 65x125 mm double rebated factory made 100% solid WPC prelem both side (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed. |
| 13 | S&F 600 mmx450x5 mm bevelled edge mirror of selected quality glass mounted on 6.0 mm thick AC building board or commercial plywood and fixed wooden plug with chromium coated brass screws and cup washers. |
| 14 | S&F PVC connection of 15 mm bore 600 mm long with brass coupling on both ends of superior quality all as specified.PTMT nuts fixed as in repair. |
| 15 | S&F framed work as in doors, gates or grill of angle or other section with gussset plates, rails, braces etc complete drilled for fixing steel sheetings or other coverings. Doors etc to be prepared for hanging or sliding with and including either hooks or hinges steel hanging door fittings ( exclusive of steel sheeting or other coverings running rails and guides) and hanging also fastening and fixing complete quality conforming to Fe-290W (Gde E-165) quality B complete all as specified. |
| 16 | M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide/zinc chrome primer complete all as specified. |
| 17 | S&F kitchen sink with drainage board made of stainless steel 1mm for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brakkets, bedding in cement mortar on to dwarf wall, conntecting union to pipe, overall mimimum size 915mmx460mm with bowl size 410mmx330mmx160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waster fitting with long screwed shanks and fly nuts, flage end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete including taking down old unserviceable sink. |
| 18 | Supply only Liquid water proofing compound complete all as spesified and directed. |
| 19 | S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down |
| 20 | S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided |
| 22 | S&F in repair 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made |
| 23 | BOQ Item No. 23 to 103 for Job No. LSA/DWP/27/SRW/2025-26 M & L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed. |
| 24 | Taking down cement or cement lime plaster on brick or stone walls, etc any description . |
| 25 | Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or mechanical means, including filling depression of scrapped surfaces with putty and and applying two coats of oil bound distemper complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 26 | Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or mechanical means, including filling depression of scrapped surfaces with putty and and applying two coats of oil bound distemper complete all as specified and as directed. Please Enable Macros to View BoQ information |
