Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed |
| 2 | M&L for single charge, vitrified, stain & scratch resistant, premium quality coloured tiles area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc mm and 8-10 mm thick, in any pattern of light & dark tiles as approved, laid over 15 mm thick screed in CM (1:6) Epoxy Cartridge tile Grout using filling the joint of tiles complete all as specified.Note- Epoxy Black,Golden Colour,complete all as specified and directed. |
| 3 | All as per item no 2 above but as in skirting over 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 4 | M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 5 | M & L for 15 mm thick Artificial Granite (of any type) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified. |
| 6 | Providing and Laying Premium (1st) quality straight edge, ceramic tiles exterior grade scratch resistance of size 300x300x7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc set and including 15 mm thick rendering in cement mortar (1:6) and pointed in white cement with pigment to match complete all as specified. |
| 7 | Taking up or down existing steel tubing and connections, 15mm bore complete all as specified. |
| 8 | S&F for CPVC pipe fixed on wall/ceiling or laying in floor of 15mm bore incl fittings complete all as specified and directed. |
| 9 | Taking up or down existing steel tubing and connections, 20mm bore complete all as specified. |
| 10 | S&F for CPVC pipe fixed on wall/ceiling or laying in floor of 20mm bore incl fittings complete all as specified and directed. |
| 11 | S&F in repair Angle stop cock with wall flange 15mm cast copper alloy, screwed for iron pipe or for brass ferrule long body.Make: Jaquar Cat Part No-FON-40053PM or equivalent in /Hindware/Kohlar. |
| 12 | S&F in repair 15 mm bore bib cock with wall flange, cast copper alloy, chromium plated, fancy type with screwed down, screwed for iron pipe or for brass ferrule long body.Make: Jaquar Cat part No OPP-15037PM or equivalent in/Hindware/Kohlar. |
| 13 | S&Fin repair brass chromium plated Basin mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed. Make: Jaquar Cat Part No ORP-10011BPM or equivalent in /Hindware/Kohlar |
| 14 | S&F in repair 15mm CP connection 600mm long including washer and brass nuts all as specified. |
| 15 | S&F in repair Europen WC china ware coloured cascade with cistern and complete fitting.Make: Jaquar/Hindware/Kohlar |
| 16 | S&F in repair counter top wash basin of size 600 x465mm with wash basin cabinet size 600x455x600mm including bottle trap , brass waste fitting complete all as specified. Make:-CERA/Hindware/jaguar |
| 17 | S&F in repair toilet Roll holder stainless steel flap all as specified. Make- Jaquar Cat Part No CAN-1153S or equivalent in /Hindware/Kohlar |
| 18 | S&F in repair towelRack 600mm long with lower hanger (stainless steel) all as specified.(Make: Jaquar Cat Part No ACN -1181S or equivalent in /Hindware/Kohlar |
| 19 | S&F in repair Soap Dispenser with glass bottle (stainless steel) all as specified. Make- Jaquar Cat Part No ACN -1135N as equivalent /Hindware/kohlar |
| 20 | S&F in repair Soap Dish holder with glass (stainless steel) all as specified. Make- Jaquar Cat Part No AKP -35731P or equivalent in /Hindware/kohlar |
| 21 | S&Fin repair towel ring Square with round flange (stainless steel) all as specified. Make- Jaquar Cat Part No ACN -1121N or equivalent in /Hindware/Kohlar |
| 22 | S&F in repair healthfaucet with 1mtr long easy flex tube in chrome Finish and wall hook of 15 mm bore with CP pipe complete set of make -Jaquar cat part No ALD - 565 or equivalent in parryware/Prayag |
| 23 | S&F in repair looking mirror 5mm thick size 3.5x3.5 feet incl stud and fastners complete all as specified and directed. |
| 24 | S&F in Double Arm wall mounted reversible plain/Magnifying (X3) pivotal Mirror all as specified. Jaquar Cat Part No ACN -1193N or equivalent in /Hindware/Kohlar |
| 25 | S&F in repair glass shelf corner with bracket of size 225mm x 225mm thickness of glass 6mm) with CP brass railing and brass screws.Make- Jaquar Cat Part No ACN -1173 or equivalent in /Hindware/kohlar |
| 26 | S&F grating doom 125mm of PTMT. |
| 27 | S & F in repair Vitreous China urinal half stall type white (excluding flushing cistern ) including waste fitting, waste pipe Complete all as specified.Make-Jaquar/Hindware/kohlar |
| 28 | S&F MS work in tubular/pipe/angle sections for frame work for roof, vertical poles, rafters and purlins including washer etc complete all as directed. |
| 29 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified. ( Design of sheet as mangalore tiles pattern in Red colour ). |
| 30 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified. |
| 31 | M & L Two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of new surfaces of any description over 10 cm width or girth complete all as specified and as directed. |
| 32 | M&L 25mm thick factory made coloured interlocking designer polished floor tiles (Ultra pattern) of Grade M-35 of shape and size as directed,and 100mm x 100mm size tiles piece on every joint of tiles flooring laid over & including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed . Note: Sample shall be got approved from GE before commencement of work |
| 33 | S&F in repair Stainless steel drapery rod of 20 mm inner dia (in lengths as directed) of & including decorative finial at both ends and pair of S S steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, (Victorian design)all as specified & as directed. Make -sample can be seen in the office of Engg-in-charge for checking and quoting the same |
| 34 | Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified. |
| 35 | M& L for 25mm thick PCC 1:2:4 type BO using 12.5 mm graded stone aggregate as in floor complete as specified and directed. |
| 36 | S & F 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified. |
| 37 | S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified. |
| 38 | Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed. |
| 39 | S & F powder coated aluminum alloy interlocking snap grid frame work for false ceiling size 600mm x 600mm consists of Main Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 38mm x 38mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and as directed and as per manufacturer. instruction. |
| 40 | M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, by GE fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed. |
| 41 | Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc complete all as specified and as directed. |
| 42 | M&L for rendering 15mm (in two layers 10mm+5mm) thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 43 | M&L for rendering 5mm thick plaster in CM (1:3) on faces of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed. |
| 44 | Complete removal of existing treatment including washing rubbing down and stopping of painted surfaces and applying 1-2 mm thick metallic texture painting (Top quality) on walls in any colour/shade/pattern/design including preperatory work for base by applying primer/putty coat by any authorised applicator complete all as specified and directed |
| 45 | M&L for new plaster surfaces and applying 1-2 mm thick metallic texture painting (Top quality) on walls in any colour/shade/pattern/design including preperatory work for base by applying primer/putty coat by any authorised applicator complete all as specified and directed |
| 46 | M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed. |
| 47 | M & L for Cement concrete as PCC 1:5:10 type E-2 using (40mm graded stone aggregate) as foundations,filling and mass concrete complete all as specified. |
| 48 | M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection/floors complete all as specified and directed. |
| 49 | Demolition of brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar complete all as specified. |
| 50 | M&L brick work, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size brick complete all as specified. |
| 51 | Taking down chowkat or frame with shutters (with out taking off shutter from the frame ) not exceeding 1.5 Sqm each as directed by Engineer-in-Charge. |
| 52 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 100 mm X 65 mm size, applying PVC solvent cement and screwed with full body threaded, star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with mild steel hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge. |
| 53 | S&F 28-30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified |
| 54 | S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed |
| 55 | S & F extruded Brass handles, fabricated type polished 150 mm complete all as specified. |
| 56 | S & F brass , barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200 mm complete all as specified. |
| 57 | M&L for 250mm long Brass, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed. |
| 58 | Dismantling PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and directed by Engr-in charge.. |
| 59 | S&F for PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed. |
| 60 | S&F for PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed. |
| 61 | S&F for PVC (SWR) bends with access door 110 mm dia complete all as specified and as directed. |
| 62 | All as per item No 61 above but 75 mm dia. |
| 63 | S&F PVC (SWR) plain bend 110 mm dia complete all as specified and as directed. |
| 64 | S&F PVC (SWR) plain bend 75 mm dia complete all as specified and as directed. |
| 65 | S&F PVC (SWR) branch piece single or double T equal or unequal with access door 110 mm dia complete all as specified and as directed. |
| 66 | All as per Item No 65 but 75 mm dia. |
| 67 | S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed. |
| 68 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface |
| 69 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth all as specified. |
| 70 | Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc all as specified and directed. |
| 71 | M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor for one light/fan/bell point in and including NEW PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with PVC modular top cover plates of suitable size for mounting of modular type switches/sockets/regulators including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engr-in-charge.Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) -Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item. |
| 72 | All as per Sl item No 71.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed. |
| 73 | All as per Sl item No 71.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed. |
| 74 | All as per item No71.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board. |
| 75 | S & F in replacement of Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified. |
| 76 | S & F in replacement of Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified. |
| 77 | S & F in replacement of Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified. |
| 78 | S & F in replacement of Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified. |
| 79 | S & F in replacement of Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified. |
| 80 | S & F in replacement of ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed |
| 81 | Supply and fix incl taking down Deco Mini energy efficient 0.5 Watt B22 Base LED Bulb Green colour with colour temperature 6500 Kelvin, controller type Push button , Globe shape for indoor/ outdoor usage all as specified and directed by Engr in Charge. |
| 82 | Supply and fix incl taking down Deco Mini energy efficient 0.5 Watt B22 Base LED Bulb Red Colour with colour temperature 6500 Kelvin, controller type Push button , Globe shape for indoor/ outdoor usage all as specified and directed by Engr in Charge. |
| 83 | Supply and fix surface/recess mounted LED luminaire 36 watt cool white 4000-5000K suitable for gridd celling cutout dimensions: 2x2 Ft. incl connecting with twin core copper wire from ceiling rose to fitting, Fixture size: (LxWxH) in (595x595x65) mm incl lamp and driver all as specified & directed. |
| 84 | S & F in replacement Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge. |
| 85 | S & F in replacement Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 9/10W 6500K of capacity ,10 watt,2 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge. |
| 86 | Supply and fix mirror light with linear & compact 12 W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt complete all as specified and directed by Engr-in-charge. |
| 87 | M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring. |
| 88 | Taking down and refixing of ceiling fan after supply and replacement of rubber reel, round cover plate of size 6 inch of ceiling fan complete with ms split clamp two Nos, nuts and bolts complete all as specified and directed by Engr-in-charge. |
| 89 | Supply and fix Exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver complete all as specified and directed by Engineer-in-Charge. |
| 90 | Material and labour for making hole of suitable size for exhaust fan 250 mm/ 300mm sweep in wall for grouting and making good the surface complete all as specified and directed by Engr-in-charge. |
| 91 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with MCB SPN 32 Amps, complete all as specified and as directed by Engineer-in-charge. |
| 92 | S&F Poly coated GI frame work as in grid for False ceiling comprising of protected GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleves and screws at 450mm centre to centre/intermediate chaqnnel 0.9mm thick having to equal flanges of 15mm each and web of 45 mm suspended from soffit and approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section (not exc 1.2 metre length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acorss the intermediate channel at 457mm centre to centre and hangers 6mm dia GI (upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x3mm size 60mm long complete with and including 7mm thick PVC laminated gypsum tiles of size 595x595mm complete all as specified & directed |
| 93 | M&L for complete removal of existing surfaces of walls including cornices, pillasters etc, and applying two coats of OBD over and incl a coat of interior wall primer over wall care putty complete all as specified and directed. |
| 94 | M&L for complete removal of existing treatment on walls and applying 02 coats of exterior weather emulsion paint to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer and over wall care putty complete all as specified. |
| 95 | S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed.Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. |
| 96 | Taking down chowkhats or frames of any description exc 1.5 Sqm and n. exc. 4 sqm each (without taking off shutters from the frame) including cutting hole to size for receive fresh PCC of hold fast and making good the disturbed surface same complete all as specified and directed. |
| 97 | S&F factory made Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 125x60mm |
| 98 | M&L PCC 1:3:6 type C-0 in 12.5 mm graded stone aggregates hold fast fillinng inside frame & hold fasts etc complete all as specified |
| 99 | S&F factory made flush shutters 35mm thick ply construction, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels commercial type on both sides with 6mm thick lipping frame to match including supply and fixing following items :(a) Mild Steel Butt Hinges 125mm - 3 nos. per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 nos. per leaf(d) Stainless Steel (804 Grade) Finished Sliding Bolt 250 mm - 1 no. per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf. |
| 100 | S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (0.36mm nominal dia of wire and average width of aperture 1.40mm) all as specified and including supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf. |
| 101 | M&L for two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wooden surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified and directed. |
| 102 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 103 | S & F in replacement of ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed |
| 104 | S & F in replacement of New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge. |
| 105 | S & F in replacement of Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable all as specified & directed by Engr-in-charge. |
| 106 | Supply and Fix Lamp holder including LED bulb 9 W including flexible wire 0.5 Sqmm copper cable all as specified & directed by Engr-in-charge. |
| 107 | M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring. |
| 108 | S & F in replacement of Sheet metal enclosure DB TPN 4 ways double door 415 volts with 200 Amps standard bus bar of suitable size and common neutral link flush mounting type, drilling holes for incoming and out going cables complete with IP-43 protection complete all as specified and directed by Engr-in-charge |
| 109 | S & F in replacement of MCB, TRIPLE pole & neutral (TPN) 10 KA 240 volts 40 to 63 Amp capacity fixing in DB’s complete all as specified and directed. (Note: MCB should be B or C curve as directed by engineer in charge) |
| 110 | Supply and fix in replacement of Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specified & directed by Engr-in-charge. |
| 111 | S & F in replacement of MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge. |
| 112 | Supply and fix in replacement of MCB , SPN, 240 Volts ,40-63 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge. |
| 113 | M & L in replacement of UNSV Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497. |
| 114 | XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core supplied & laid in replacement complete all as specified& directed by Engineer-in-Charge. |
| 115 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. |
| 116 | Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil. |
| 117 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point. |
| 118 | Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed. |
| 119 | Cutting of hardstanding floor/wall for laying of cable including matching with suface by using cement concrete all as specified and directed. |
| 120 | Supplying & laying factory made unreinforced Precast concrete cable covers class LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as directed by Engr-in-Charge |
| 121 | Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed. |
| 122 | Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc Complete all as specified. |
| 123 | M & L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes Complete all as specified. |
| 124 | M&L for Virified Ceramic light shade tiles 8 - 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc,over & including 15 mm thick screed in cement mortar (1:4) over and Epoxy Cartridge tile Grout using fill the joint of tiles complete all as specified.Note- Epoxy Black,Golden Colour. |
| 125 | All as per Item No 124 but as a skirting incl. 10mm thick rendering as in back coat complete all as specified. |
| 126 | M&L for 7 to 8 mm ant-skid ceramic joint free premium quality coloured tiles area of each tile esc 0.06 spm but next 0.11sqm, as in floors etc. in any pattern ghe & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 127 | M & L for Machine cut cudappa stone slab 20 - 25 mm thick laid over cement screed base 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 128 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified. |
| 129 | Dismantling water tanks and removing to store of capacity exc 500 & not exc 1000 ltrs complete all as specified. |
| 130 | Supply and and fixing, hoisting PVC tank of 1000 ltr capacity including Supplied and fixed 20mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed. |
| 131 | S&F in repair wall mixture mixing valves incl. three joints to steel pipes or unions 15 mm bore fancy type best quality as per sample approved by GE Make-Jaquar Cat Part No QQP-7217PM or equivalent in Hindware/Kohlar. |
| 132 | S&F PVC Cabinet 600x450mm overall size with looking mirror of selected qality glass mountedover PVC Framing as per sample complete fixed in repair complete all as specified. |
| 133 | S&F stainless steel plate rack of size not less than 90cmx75cm(wt n. less than 4 kg) fixed with stainless steel screw including taking out old unserviceable wooden plate rack as approved by GE complete all as specified. |
| 134 | S&F in repairs chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed Make-Jaquar /Hindware/Kohlar. |
| 135 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth ( without using extra cement ) with sagol finish on plastered surface complete all as specified and as directed. |
| 136 | M&L for preparation of new decorated plastered or unplastered surfaces of walls and applying two coats of exterior emulsion over one coat of primer and over 2mm thick Putty for levelling and smoothening, complete all as specified and directed. |
| 137 | M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1.5mm thick wall care putty complete all as specified and directed. |
| 138 | M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed. |
| 139 | S&F sinks with drainage board made of stainless steel lmm thickkitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 140 | S&F in repair brass chromium plated Sink mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed. Make: Jaquar /Hindware/Kohlar |
| 141 | S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 142 | S&F frosted glass 4.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes complete all as specified and directed. |
| 143 | S&F 28-30 mm thick moulded WPC factory made 100% Sketon/Glased door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified |
| 144 | S&F factory made WPC extruded board CNC machine cut jali fixed to Skelton door as per approved design complete all as specified and directed |
| 145 | S&F Kitchen cabinets including all fittings and fixtures incl the follwing. (a) 19mm thick plywood of commercial block board,Make: kitply/century ply/ green ply(b) 1mm thick commerical lamination on both side fixed to black board(colour and design as approved)(C) SS pullout basket SS finish of plain 15'' x 20'' x 6'' (D) 'D' type handle 100mm SS finish(E) Pullout basket SS finish cutlery wire of size 15''x20''x4'' (F) 2nd class hard as in frame work(G)SS channels for pullout basket as required. (Note:- The measurement shall be taken from front elevation and not girthwise. |
| 146 | S&F factory made UPVC brown colour door shutter made of extruded profile with wall thickness of 2.3mm(+-0.2mm) door profile with hollow section with multy chamber. Frame (60x62mm),sash(42mmx67mm).sliding interlock(one verticle length in each shutter)(45.5mmx28mm).Glazing bead(24.5mmx16mm)will be mittred cut and fusion welded at all corner.including drilling holes for fixing hardware and drainge of water etc am,.making arrangement for fixing of hardware.EPDM gasket,1.2+0.2 mm thick galvanised steel frame(30mmx21.5mm).sash (30mmx18mm)profile to be inserted in required profile.frame will be finshed to the wall with 8mmx100mm long fasteners.hardware touch lockof zinc alloyed(brown powder coated)steel roller system including 5mm thick glazing with selected quality glass ,aluminium track and bottom rail for two track sliding fram,wool pine for sliding sash and interlock. Note.The unit rate coated by contractor includes cost of glass and all other conncted accessories,net opening will be measured for purpose.Make:H2O window,Fenesta,Anuplast as approved by GE. |
| 147 | M&L for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate in any situation except foundation complete all as specified and directed. |
| 148 | S&F 10mm dia and above TMT bars cut to length, bend to shape as required including cranking, hooking ends & binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directd. |
| 149 | all as item No 77 here in before but 5mm dia and over upto & including 10mm dia in stirrups, spaces & binder complete all as specified and directd. |
| 150 | S & F powder coated aluminium window/ventilator shutters, side hung type with sash bars, including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 4mm thick and incl GI wire mesh 0.56 mm nominal dia of wire and average width of aperture 1.18 mm , size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member shall be 1.40mm thick complete all as specified. |
| 151 | S&F for prelaminated particle board 18/19 mm interior grade prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screw timber frame work Including dismantling board all as specified. |
| 152 | S&F in repair continuous (paino) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) in 40mm all as specified. |
| 153 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel bright finished all as specified. |
| 154 | S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixing complete all as specified. |
| 155 | Supply & fix in replacement of Modular bell push switch 1 way, 6 Amps, 1 module complete all as specified. |
| 156 | Supply & fix in replacement of Call bell ding dong AC 230 volt single pole complete all as specified. |
| 157 | Supply and fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including hole making Louver complete all as specified and directed by Engineer-in-Charge. |
| 158 | S & F modern energy efficient bedroom Muziris wall decorative light of capacity 20 watt single headed 240 volt, IP20 rating, controller type (push button), product weight 1.04 kg, body material (metal), power source (corded electric),Lamp base E27, Colour(bronze) incl electrically connection , including removing of unserviceable decorative light fittings of any description complete all as specified and directed by Engr-in-charge. Make: Philips model No 31425 or as equivalent. |
| 159 | Excavating in trenches n exc 1.50m in width and n exc 1.50m in depth for foundation, manholes etc as well as n exc 10 sqm on plan area and getting out in soft/loose soil all as specified and directed. |
| 160 | M&L for PCC 1:5:10 type E-2, using 40mm graded crushed stone aggregate in foundation, filling and mass concrete all as specified and directed. |
| 161 | M&L for broken stone hard core of gauge n. exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface all as specified and directed. |
| 162 | S&F mild steel deformed bars, 6mm to 8mm dia cut to length, bent to shape required including cranking and binding with & including mild steel wire (annealed) not less than 0-.90mm dia complete. |
| 163 | M&L for form work to soffits of suspended slabs such as roof slabs etc for rough finished concrete surface complete all as specified and directed. |
| 164 | M&L for form work to sides for slabs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide for fair finished concrete surface complete all as specified and directed. |
| 165 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete. |
| 166 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete. |
| 167 | M&L for rendering in cement mortar (1:6) 10 MM thick finished even smooth complete all as specified on brick or concrete surface of fair faces. |
| 168 | M&L 15mm thick cement plaster in two layer first coat in CM 1:6,10cm thick & second layer 5mm thick in CM 1:4 mixed with WPC 3% by weight of cement including finishing fair & even on brick or concrete surfaces of othern than fair faces. |
| 169 | M&L for 5mm thick cement plastering to RCC surfaces in CM :1:3) finished even and smooth w/o using extra cement on ceiling surfaces. |
| 170 | S&F stainless steel butt hinges medium weight cold rolled ISI marked of size 100 mm complete all as specified and directed. |
| 171 | M&L for MS framed guard bars conforming to Fe-410-0 or Fe-310-0 welded to steel windows/ventilations complete all as specified and directed. |
| 172 | S&F vitrous china squatting pan of ORISSA patterns 'long pan' size 580mx440mm white with 'P' or 'S' trap front of back inlet and foot rest including long band any pattern (excluding flushing cistern and flush pipe) including provision for lime concrete bedding. |
| 173 | S&F PVC flushing cistern low level 10 ltr cap with inlet ball valve float and handle syphonic action type incl brackets and flush pipe of polythene of low or high density ISI marked. |
| 174 | S & F in repairs Vitreous China oval shape wash basin, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated with waste pipe complete all as specified. |
| 175 | S&F looking mirror of selected quality mounted on 6 mm thick ply and fixed to wall with wooden plugs chromium plated brass screws and washers. |
| 176 | S&F for CI floor trap with incl jointing with waste pipe in cement mortar of size 100mm. |
| 177 | S&F gully trap stone ware square of round mounted type 'P' of size 150x150mm. |
| 178 | S&F 20mm dia stop valve of copper alloy screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union fixed. |
| 179 | S&F PVC connection 15mm dia 600mm long of heavy grade screwed one end to inlet of WHB/Pillar tap/cistern etc complete incl brass union coupling on both ends connfirming to IS-3076 complete with connector for connection old water. |
| 180 | S& F for CI pipe 75mm dia laid in floor in any length with or without cars with cement joint (waste & vent pipe). |
| 181 | all as per item No 38 here in before but 100mm dia. |
| 182 | S&F for CI bend any radius disminshing pieces or tyes of 100mm bore with ducks for or head rest. |
| 183 | S&F for CI branch pieces single equal or unequal ordinary or inverted or with paralled brnach 100 mm bore. |
| 184 | S&F cast iron sand cast pipe 100 mm dia with or without cars with cement joint fixed to walls. |
| 185 | S&F cast iron 100 mm cowl. |
| 186 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate)75mm thick on in sub base of fllor .. |
| 187 | M&L for 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directd. |
| 188 | M&L for coloured glazed ceramic tiles on vertical surface (300mmx600mx7m) thick set and jointed in neat cement slurry and pointed with white cement to match complete all as specified and directd. |
| 189 | M&L for coloured non skid ceramic(300x300mm) tiles 7 to 8mm thick as in floor set and jointed in neat cement slurry and pointed with white cement to match complete all as specified and directd. |
| 190 | S&F steel ventilation with top hung shutter including hinges, steel peg stay complete. |
| 191 | S&F 4mm thick sheet glass of figured,pin headed and glazing with oil putty in square n exc 0.50 sqm in each. |
| 192 | M&L for preparation of newly steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide over 10 cm width or girth complete all as specified and directd. |
| 193 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of chalk whiting complete all as specified and directd. |
| 194 | M&L for three coats of white wash on wall of newly plastered surface. |
| 195 | S&F for preparation of newly plastered surfaces and applying three coats of white wash on ceiling. |
| 196 | M & L for Factory Made solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 197 | S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face & 5mm thick plain colour pvc sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified. |
| 198 | S&F Aluminium tower bolt 150mm long stove enamelled black with bright bolt & fixed. |
| 199 | S&F Aluminium sliding door bolt with hasp and staples type bolt type , 300mm long stove enamelled and fixing clips of sheet cast or extruded section or cast aluminium alloy and fixed all as specified. |
| 200 | S&F Aluminium alloy handle of 100m size oval type stove enamelled & fixed all as specified. |
| 201 | M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing liquid finished even and fair without using extra cement complete all as specified. Note: Water Proofing liquid shall be measured and paid separately. |
| 202 | M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :-i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sq.M ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg / Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer's iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesble roof surfaces complete all as per manufacturer's instructions and as directed . |
| 203 | M/L brick work in CM1:4, in half brick thick wall. |
| 204 | S&F in repair Europen WC china ware coloured cascade with cistern and complete fitting.Make: Jaquar/Hindware/Kohlar |
| 205 | S/F vitreous china toilet paper holder fixed to walls with chromium plated CP) brass screws |
| 206 | S/F Vitreous china Soap dish of appx size 160*160*90mm any type fixed to plugs with chromium plated brass screws |
| 207 | S/F Sheet glass shelf assembly consistig of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long |
| 208 | S & F brass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified. |
| 209 | M & L for Granite 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types all as specified. |
| 210 | M & L for Machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 211 | M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection/floors complete all as specified and directed. |
| 212 | S&F Health faucet including MS/anodised hanging device fixed complete all as specified and as directed. |
| 213 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in loose / soft soil all as specified and directed. |
| 214 | M&L for broken stone hard core of gauge n. exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface all as specified and directed. |
| 215 | M & L 100mm thick PCC 1: 4: 8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 216 | M&L for Machine pressed precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey and pigment as in floor/pavement complete all as specified and as directed. |
| 217 | M&L for Providing precast concrete type C-1, 1:2:4(using 20mm graded stone aggregate) as in kerb blocks with plain fiar faces, including chamferes, weathering, throating etc and setting in mortar 1:4 complete with joints to match. |
| 218 | M&L for cement concrete Type 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 219 | M & L for Sand filling under floors or in foundation including watering and consolidation |
| 220 | S & F in replacement of New generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge. |
| 221 | S & F in replacement Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 9/10W 6500K of capacity ,10 watt,2 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge. |
| 222 | M&L for Boring of holes under road, pavement, hard standing by trench-less technology using ultrasound technique and necessary machine suitable to pass through 40 to 80 mm bore GI tubing and cable etc complete all as specified and directed.Note: GI pipe shall be measured and paid seperately under relevant item. |
| 223 | XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core supplied & laid in replacement complete all as specified& directed by Engineer-in-Charge. |
| 224 | M&L for taking out branch connection from existing CI/DI pipe line upto 250 mm bore by using freulle. |
| 225 | Supply and lay pipe galvanised \\"Medium Class\\" including fittings 25 mm (1\\") dia |
| 226 | Supply and lay pipe galvanised \\"Medium Class\\" including fittings 20 mm (3/4\\") dia |
| 227 | Supply and fix Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed of 50 mm dia |
| 228 | Supply and fix Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm dia Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
