|
| 1 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. (CSR 8.44) |
| 2 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.(a) Doors of area 3 sqm and below.. (CSR 8.26) (a) |
| 3 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.(b) Windows of area 3 sqm and below. (CSR 8.26) (b) |
| 4 | Scraping (c) Cement plaster (CSR 8.31) (c) |
| 5 | Dismantling glazed tiles (to be carefully removed). (CSR 8.35) |
| 6 | Providing and Fixing ceiling at height upto 4 mtr consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and to the entire satisfaction of engineer-in- charge. (CSR 13.65) |
| 7 | Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge. (CSR 16.69) |
| 8 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete (CSR 16.6) (Rs.61 + 5.35%) |
| 9 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) (CSR 16.63) |
| 10 | Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick. (CSR 17.27) (a) (iv) |
| 11 | Providing and fixing decorative ply wood, 4mm thick three ply teak faced on one side in partition including fixing to frames with steel screws complete (CSR 17.40) |
| 12 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 1200 mm (DSR 2023 No. 11.41A.3.2) |
| 13 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer .(CSR 14.117) |
| 14 | Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. (b) Size 600x1200 mm. |
| 15 | Providing and fixing Cupboard box 1'-6\\" deep with shutter & shelves with 18mm thick commercial ply having sides of box with 18mm ply with 9mm ply on backside covered with 1mm thick lamination on one side of approved shade complete with help of adhesive including wooden lipping on sides and fixing in wall including 1no horizontal shelve and vertical support to shelve at 1'-6\\" height and size of shelve 1'-6\\"x1'-6\\" wide with hinges, hanger rod, lock, catcher, handle, tower bolt etc and openable two shutter laminated inside and teak veneer outside including melemine polish complete on veneered face complete in all respect. (For payment front outer elevational area to be measured) |
| 16 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (c) Size 1500mmx600mm or any other size. (CSR 30.61) (c) |
| 17 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size all complete (CSR 33.18 g) |
| 18 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multkhambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor {whereever required} of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m). Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body (DSR 2023 No. 9.147.A4.2) |
| 19 | Providing and fixing LED panel of size with 12mm thick decorative wood with teak faced on one side complete with help of adhesive and fixing in wall with wooden batten frame 40mmx40mm of hollock wood at 2'-0\\" center to center on horizontal & vertical including top counter, 1no shelve under side at 6\\" from top counter and width of shelve 1'-6\\" including 3\\" raised portion on one side with three vertical support complete as per architect drawings complete in all respect.(For payment front outer elevational area to be measured) |
| 20 | Providing and fixing triple shade blind complete in all respect |
| 21 | Providing and fixing commercial plywood 12mm thick (CSR 17.50) |
| 22 | Providing and fixing of wall panelling made of soft of partal (soft wood) frame work consisting of 3\\"x2\\"size partal at required spacing of 2' c/c but not exceeding 3' in either direction or as/site condition, finished with 4mm thick teak veneer over 6mm BWP ply complete. The rate shall inclusive of providing and giving neat finish inclusive of polishing on all exposed wood surfaces. Also note that the ply/laminates fixed to the wooden frame shall have grooves of 8mmx8mm at 400 spacing vertically/horizentaly as per given design |
| 23 | Providing and fixing ply wood, plain lining, butt jointed including PVC Plug placed at 45 cm to 65 cm centers complete with necessary nails (Frame work shall be payable extra) 12mm thick decorative wood with teak faced on one side (CSR 17.32) (d) |
| 24 | Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete. 200 x 19 x 1.9 mm (DSR 2023 No. 9.150) |
| 25 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete. (DSR 2023 No. 9.149) |
| 26 | Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete. (DSR 2023 No. 9.153) |
| 27 | Providing and fixing glazing in aluminum/uPVC door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . Float glass panes of 5 mm thickness (CSR 17.47) (i) |
| 28 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. (CSR 16.15) |
| 29 | Melamine polish two or more coats to give required finish including one coat of wood filler (CSR 16.66) |
| 30 | Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). (CSR 17.22) (iv) |
| 31 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm) (CSR 17.43) (c) |
| 32 | Providing and fixing bright finished brass handles with screws etc. complete: 125mm (DSR 9.81.1) |
| 33 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10 mm (DSR 9.74.1) |
| 34 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (DSR 9.82) |
| 35 | Removal of Malba from 2nd floor through staircase by mannual labour |
| 36 | Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone boulders, Kankar and building rubbish, Earth. 10 0-10.0 km (CSR 5.2) Please Enable Macros to View BoQ information |
