|
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, includingconsolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR 2.10 |
| 2 | Pipes cables etc. not exceeding 80mm dia as per DSR No. 2.10.1.1 |
| 3 | Pipes cables etc. exceeding 80mm dia but not exceeding 300mm dia as per DSR No. 2.10.1.2 |
| 4 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4.1 |
| 5 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 6 | 12 mm cement plaster of mix as per DSR 13.1 |
| 7 | 1:4 (1 cement: 4 fine sand) as per DSR 13.1.1 |
| 8 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR 17.3 |
| 9 | W.C. pan with ISI marked white solid plastic seat and lid DSR 17.3.1 |
| 10 | Providing and fixing Stainless Steel A ISI 304 (18/8) Kitchen Sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
| 11 | Kitchen sink without drain board DSR 17.10.2 |
| 12 | 610x460 mm bowl depth 200 mm DSR 17.10.2.2 |
| 13 | Providing and fixing white vitreous chinawarecloset squatting pan DSR 17.13 |
| 14 | Orissa pattern W.C. pan of size 580 mm DSR 17.13.2 |
| 15 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. DSR 17.19 |
| 16 | 10 litre (full flush) capacity-white DSR 17.19.1 |
| 17 | Providing and fixing soil, waste and vent pipes : DSR No. 17.35 |
| 18 | 100 mm dia. DSR 17.35.1 |
| 19 | Sand cast iron S&S pipe as per IS: 3989. DSR 17.35.1.2 |
| 20 | 75 mm diameter : DSR 17.35.2 |
| 21 | Sand cast iron S&S pipe as per IS: 3989 DSR 17.35.2.2 |
| 22 | Providing and fixing plain bend of required degree. DSR No. 17.39 |
| 23 | 100 mm dia as per DSR No. 17.39.1.2 |
| 24 | Providing and fixing heel rest sanitary bend as per DSR 17.40 |
| 25 | 100 mm dia as per DSR 17.40.1.2 |
| 26 | Providing and fixing collar DSR No. 17.57 |
| 27 | 100 mm dia as per DSR No. 17.57.1.2 |
| 28 | 75 mm dia as per DSR No. 17.57.2.2 |
| 29 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR No. 17.60 |
| 30 | 100 mm inlet and 75 mm outlet DSR 17.60.2.1 |
| 31 | P/F of G.I. pipes compelte with G.I. fitting and clamps including making good the wall etc. |
| 32 | 20 mm dia nominal bore DSR 18.10.2 |
| 33 | 32 mm dia nominal bore DSR 18.10.4 |
| 34 | P/F of G.I. pipes compelte with G.I. fitting and clamps including making good the wall etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall DSR 18.11 |
| 35 | 15 mm dia nominal bore DSR 18.11.1 |
| 36 | 20 mm dia nominal bore DSR 18.11.2 |
| 37 | P/F of G.I. pipes compelte with G.I. fitting s including trenches & filling etc as per DSR No. 18.12 |
| 38 | 20 mm as per DSR 18.12.2 |
| 39 | Providing and fixing of Gun-Metal Peat Valve |
| 40 | size 20mm DSR 18.17.1A |
| 41 | Providing and fixing uplasticised PVC connection pipe with brass unions :DSR No. 18.21 |
| 42 | 15 mm nominal bore DSR 18.21.2.1 |
| 43 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR No. 18.46 |
| 44 | 15 mm nominal bore DSR 18.46.1 |
| 45 | 20 mm nominal bore DSR 18.46.2 |
| 46 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.DSR 18.48 |
| 47 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 48 | 20 mm nominal bore, 18.62.2 |
| 49 | Cutting holes up to 30x30 cm in walls including making good the same: DSR No. 18.76 |
| 50 | With F.P.S. bricks DSR 18.76.1 |
| 51 | Cutting holes up to 15 x 15 cm in R.C.C. floore and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 including finishing complete so as to make if leak proof. DSR No. 18.77 |
| 52 | Providing and fixing square-mouth HCI gully trap complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 53 | 100x100 mm size P type |
| 54 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.4.1.1 |
| 55 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coatof neat cement on walls and bed concrete etc. complete as per standard design: DSR 19.30 |
| 56 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : DSR 19.30.3 |
| 57 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.30.3.1 |
| 58 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" dia of approved make |
| 59 | Providing and fixing of G.I. elbow 80 mm x 32 mm of approved make. |
| 60 | Construction of Curb consisting of cement concrete 1:2:4 including cost of sand bajri etc. |
| 61 | Providing and fixing drip seal joint |
| 62 | 100 mm dia. |
| 63 | 75 mm diameter : |
| 64 | Providing and fixing concealed stop cock complete with internal part body make jaquar + 083 or equivalent as per approved make list |
| 65 | Providing and Fixing 15mm PVC Connection of approved make Vikking |
| 66 | Supplying and fixing of Monoblock pump set 1 H.P. make Crompton with required platform and electricla wire complete in all resects or equivalent as per approved make list |
| 67 | Providing and fixing Hydro Pneumatic Pump of size 0.5 HP Single Pump complete with Connecting Cable, NRV , having discharge 2000 LPH at 6 mtr head make Crompton Model MiniForce II or equivalent as per approved make list |
| 68 | Prov. & fixing of looking mirror of size 450x600mm made with 5mm thick (minimum) superior quality glass including cost of hard board, PVC beading and C.P. Screw etc. to satisfaction of EIC of approved make |
| 69 | Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation. |
| 70 | 110 mm Please Enable Macros to View BoQ information |
