|
| 1 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 2 | All kinds of soil. |
| 3 | Pipes, cables etc. not exceeding 80 mm dia. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 9 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 11 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 13 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 14 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 16 | 250x16 mm |
| 17 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 18 | 150x10mm |
| 19 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. Complete |
| 20 | 100mm |
| 21 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 22 | Profile B |
| 23 | Fixing with adjustable lugs with split end tail to each jamb |
| 24 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 25 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 26 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 27 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 28 | 12 mm cement plaster of mix : |
| 29 | 1:4 (1 cement: 4 coarse sand) |
| 30 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour |
| 31 | Old work (one or more coats) |
| 32 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 33 | Renewing glass panes, with wooden fillets wherever necessary: |
| 34 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 35 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 36 | Of area 3 sq. metres and below |
| 37 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 38 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 39 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 40 | W.C. pan with ISI marked white solid plastic seat and lid |
| 41 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 42 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 43 | Providing and fixing white vitreous Pedestal for Wash basin completely recessed at the back for the reception of pipes and fittings |
| 44 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 45 | Orissa pattern W.C. pan of size 580x440 mm |
| 46 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 47 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 48 | 10 litre (full flush) capacity-white |
| 49 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete |
| 50 | Flexible pipe |
| 51 | 32 mm dia |
| 52 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 53 | 100 mm inlet and 75 mm outlet |
| 54 | Sand cast iron S&S as per IS - 3989 |
| 55 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge |
| 56 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 57 | 20 mm dia nominal bore |
| 58 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 59 | 15 mm dia nominal bore |
| 60 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 61 | 25 mm dia |
| 62 | 32 mm dia |
| 63 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 64 | 15 mm nominal bore |
| 65 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 66 | 25 mm nominal bore |
| 67 | 32 mm nominal bore |
| 68 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 69 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 70 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 71 | With common burnt clay F.P.S. (non modular) bricks |
| 72 | Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. |
| 73 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 74 | 100x100 mm size P type |
| 75 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 76 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design |
| 77 | Inside dimensions 600x 850 awn and 45 cm deep for pipe line with three or more inlets : |
| 78 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 79 | Providing and fixing of chinaware Oval Shape wash basin. (Snow White). Cat. No. S2030104, Make Cera, Size: 560 x 470 x 190 mm complete in all respect to the entire satisfaction of EIC |
| 80 | Providing and fixing C.P. Pressmatic pillar cock of approved quality make Cera |
| 81 | Providing and fixing ISI Marked water proof 30mm thick doorshutter of pine frame sesoned and treated with seasoned pine filler and 2.5 mm gurjan core, fungus resistant, eco friendly with 1 mm thick laminated on both side with phenol formaldehyde resin conforming to IS: 848, complete in all respect. |
| 82 | Providing and Fixing of Standard Urinal size 375x390x590mm snow white model of Cera Cat. No- S4020112 to the entire satisfaction of EIC complete in all respect complete |
| 83 | Providing and fixing Pressmatic Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange (PRS-077) to the entire satisfaction of EIC. |
| 84 | Providing and fixing of size 22\\" x 16\\" bevelded edge of superior glass of approved quality complete with 6mm thick hard board complete in all respects |
| 85 | Providing and fixing of Bib cock with wall flange, complete in all respect make as approved by EIC Jaquar (Continental) /Cera (Ocean) / Hindware (Element) |
| 86 | Providing and fixing of Anglular stop cock, with wall flange, complete in all respect make as approved by EIC Jaquar (Continental) /Cera (Ocean) / Hindware (Element). |
| 87 | P/F of C.P. brass soap dish with C.P screw complete in all respect make as approved by EIC Jaquar (Continental) /Cera (Ocean) / Hindware (Element) |
| 88 | Providing and fixing of C.P. Towel Ring Square with round flange complete in all respect make as approved by EIC Jaquar (Continental) /Cera (Ocean) / Hindware (Element) |
| 89 | Providing and fixing of toilet paper holder complete in all respect make as approved by EIC Jaquar (Continental) /Cera (Ocean) / Hindware (Element) |
| 90 | Providing and fixing of pumping monoblock single phase for boosting of make Cropton/Lubi or equivalent |
| 91 | 2 H.P. |
| 92 | Providing and fxing of water filter candle complete. |
| 93 | Providing and fixing of water filter black carbon candle classic model for Aqua guard. |
| 94 | P/F of Hi Flow water Filter-cum-Purifier including installation charges 2-3 Ltr/Minute. Make Aqua Guard/Kent/Usha/Brita/Pure-it |
| 95 | Providing, laying and jointing commissioning and testing of PVC pipe of 6 Kg/Cm2 pressure pipe IS marked complete in all respect of make supreme |
| 96 | 110 mm |
| 97 | 80mm Please Enable Macros to View BoQ information |
