|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed. |
| 2 | M&L for 300 x 300 x 10mm thick heavy duty ceramic floor tiles laid in floor etc and jointed in neat cement slurry & pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 3 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7mm/ 300 x 600 x 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 4 | M&L for Vitrified Ceramic tiles 8 to 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 |
| 5 | All as per item No.4.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 6 | M&L for Vitrified Ceramic tiles 8 to 10mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 7 | All as per item No.6.00 but on vertical surfaces such as skirting including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 8 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6. complete all as specified and directed. |
| 9 | All as per item No.8.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 10 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 11 | All as per item No.10.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 12 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and directed. |
| 13 | M&L for pre-polished coloured cement concrete chequred tile of approved quality size 250 x 250mm on floors over and including 20mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match the tiles complete all as specified and directed. |
| 14 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 15 | All as per iten No.14.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 16 | M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 17 | Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site complete all as specified and directed. |
| 18 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete complete all as specified and directed. |
| 19 | M&L for Cement concreat type B-0 (1:2:4) using 12.5mm graded stone aggregate 25mm thickfinished surface rough to receive tiliing complete all as specified and directed. |
| 20 | S&F Machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-40 grade with grey cement and pigment etc over and incl 40mm thick uniformly levelled surface of stone dust cushioning complete all as specified and directed. |
| 21 | Dismantling Plain or Corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern Roof covering complete all as specified and directed. |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 23 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 24 | S&F for Pre- painted galvatume aluminum zinc coating GI plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 25 | S&F of rolled section as in posts, main and cross beam, hip and jack rafters, purlins, where connected to common rafters (Beam, tee, angle, channel pipes, hollow tubes, plates and flat sections etc.) including distance pieces, cleats etc. cutting half brick thick wall and fixing with cement mortar FE-410, (Gde-E-250) quality complete all as specified and directed. |
| 26 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 27 | Taking down Shutters of any description exc. 1 sqm but n. exc 2 sqm each of any description complete all as specified and directed. |
| 28 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm thick of Plain colour PVC sheet reinforced with M.S. Square tube S&F in opening as per specification & drawing complete all as specified and directed. |
| 29 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 30 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drawing complete all as specified and directed. |
| 31 | S & F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, incl 03 Nos of 100mm size stainless steel butt hinges for each shutter, supplying & fixing in frame at site as per specification & drawing, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 32 | Taking down door shutters from frame exc. 1sqm but not exc. 2 sqm each and refixing the shutter in the same opening after easing and adjusting complete all as specified and directed. |
| 33 | S&F galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 34 | S&F 150mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 35 | S&F100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 36 | S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 37 | S&F in repair 25mm bore SS Pipe curtain rods including high quality SS Brackets & SS Decorative dome, suitable for door/ widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc. complete all as specified and directed. |
| 38 | S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed. |
| 39 | S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed. |
| 40 | S&F in repairs vitreous china squatting pan `Orissa` pattern, size 580 x 440mm white in repairs with integral foot rests (Excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 41 | S&F in repairs vitreous china, white, wash hand basin, flat back size size 550 x 400mm including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed. |
| 42 | S&F in repairs vitreous china, white, under counter basin wash hand basin, size 380 x 480 x 140mm with brass coupling, including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed |
| 43 | S&F in repairs vitreous china, white, table top basin wash hand basin oval shape, size 190 x 550 x 430mm with brass coupling, including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed |
| 44 | S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed. |
| 45 | S&F in repair Grating 100mm dia of CP with or without hole complete all as specified and directed. |
| 46 | S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 47 | S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 48 | S&F in repair 15mm dia brass chromium plated swan neck pillar tap, fancy type with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed. |
| 49 | S&F in repair single piece Vitreous china, wash down water closet with UF soft close slim seat cover, hinges, fixing accessories, accessories set connection to drain or outgoing pipe and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed. |
| 50 | S&F in repair Vitreous china, wash down wall hung water closet pan with slim cistern including soft closing seat cover and all necessary fitt/ fixtures connection to drain or outgoing pipe and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed. |
| 51 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed. |
| 52 | S&F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 53 | S&F in repairs two way Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 54 | S&F in repairs Toielt Paper Holder Stainless Steel fixed to wall complete all as specified and directed. |
| 55 | S&F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall complete all as specified and directed. |
| 56 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and directed. |
| 57 | S&F in repair Vitreous China Urinal Pot of size 245 x 320 x 560mm or similar size white colour complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, with grating and union for discharge pipe including 40mm waste coupling, 375mm long PVC connection and waste pipe complete all as specified and directed. |
| 58 | S&F in repair Brass Bottle Trap 300mm (12\\") Designer wall connection pipes and wall flange complete all as specified and diretced. |
| 59 | Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m complete all as specified and directed. |
| 60 | M&L for Brickwork with fly ash bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed. |
| 61 | M&L for 10-12mm thick decorative plaster of paris false ceiling bending/ moundling as required shape with two coats of plaster emulsion paint over a coat of primer on decoratived surfaces of ceiling including 26 gauge galvanished iron sheet 'C' shaped main member @ 750mm C/C cross member 'U' shape @ 450mm c/c and perimeter of 'C' shaped GI wire 6mm dia or more or FI 40 x 4mm thick for hanging arrangement with MS suspension fastner spaced @ 450mm C/C in both direction and 'C' member shall be made out of not less than 90mm wide GI sheet strip and side tray as required of approximate size 3.5 mtr height as required at site complete all as specified and directed. |
| 62 | S&F in repair Ball valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. |
| 63 | S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron clamps of suitable size etc complete all as specified and directed. |
| 64 | Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall with iron clamps of suitable size complete all as specified and directed. |
| 65 | S&F in repairs PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including waterleak proor treatment complete all as specified and directed. |
| 66 | S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and directed. |
| 67 | S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and directed. |
| 68 | S&F PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 75mm bore complete all as specified and directed. |
| 69 | S&F PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 110mm bore complete all as specified and directed. |
| 70 | Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs complete all as specified and directed. |
| 71 | Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, (E -Board) exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 2.0mm thick pre-straightened GI wire. laying ceiling tiles of approvde make and specification, of size 600mm x 60mm x 6mm complete all as specified and directed. |
| 72 | S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finshes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories etc. complete all as specified and directed. |
| 73 | S & F of Powder coated aluminum three track sliding shutters consisting two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces with brick work and plaster as required at site:-(i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick.(ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm.(iii) Aluminium glazing strip of size 18.2 x 16.66mm.(iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters.(v) IDPE rubber gasket for fixing glass.(vi) Locking cleat per shutter - 01 No.(vii) Two Nos sliding rollers per shutter.(viii) Rubber shock absorber 03 No per shutter.(ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter.(x) Fixing screws for frame with wall - 06 No per window. |
| 74 | S&F 5.5mm to 6.5 thick looking mirror, of selected quality glass fitted to wall with brackets complete all as specified and directed |
| 75 | S&F glazed (5.0mm thick plain/ coloured glass) aluminum door powder coated consisting of frame of 63mm x 38mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 83 x 44mm, bottom rail & lock rail size is 110 x 44mm & style of door shutter is 83mm x 44mm with handles 2 Nos in each door, hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle, locking arrangemen, floor spring and floor door stopper incl. necessary joining cleats, glazing clips etc complete (Al. section thickness 2mm) confirming to IS. complete all as specified and directed. |
| 76 | M&L for providing PVC WALL PANELLING of 5mm thick consisting of panel of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelaminated PVC sheet. The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company. The strips should have in their centre a gove of 6mm widht and 1mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fasteners the distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement complete all as specified and directed. |
| 77 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash asteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed. |
| 78 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed. |
| 79 | Supply & laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 80 | M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth complete all as specified and directed. |
| 81 | Disconnecting existing tanks, setting aside for carrying water proofing treatment, reconnecting & refixing in position capacity exc 500 ltrs but not exc 1000 litres complete all as specified and directed. |
| 82 | M&L for 10mm thick screed bed on concrete surfaces in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed. |
| 83 | M&L for PCC 25mm thick (1:2:4) type Bo using 12mm graded stone aggregates mixed with integral waterproofing chemical mixed in proportion of 200ML/50Kg cement as in padding on roof surfaces for correcting/ making proper slope on roof/ chhaja and roof kerbs/ benching complete all as specified and directed. |
| 84 | M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm. The height of the roof may upto 9 m comprising with following items including taking down existing water proofing treatment and removing rubbish to a distance not exc 100 m complete all as specified and directed:- (i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, mass dust etc by wire brushing and dusting.(ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated.(iii) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. (iv) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3mm thick composed of woven polyster center core, which is sandwitched between high quality polymeric bitumen mix having softening, high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps as per manufacture instruction etc.(v) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. |
| 85 | M&L for applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed. |
| 86 | M&L for preparation of old wall surfaces by brooming down with steel wire brushes, scraping down moulds moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed. (Note:- Application is done by Mechanical means to any heigh of of bldg with full saftey of labour or manpower and incase of any mishappening contractor is solely responsible). |
| 87 | M&L for preparation of old wall surfaces by brooming down with steel wire brushes, scraping down moulds moss and efflorescent salts and treating oil and greasy spots and applying two coat of white wash on walls complete all as specified and directed. (Note:- Application is done by Mechanical means to any heigh of of bldg with full saftey of labour or manpower and incase of any mishappening contractor is solely responsible). |
| 88 | M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified and directed (Note:- Contractor shall furnished gurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carred out through air less spray machin (Mechanical means). |
| 89 | M&L for preparation of old wall surfaces by brooming down with steel wire brushes, scraping down moulds moss and efflorescent salts and treating oil and greasy spots and applying two coat of distemper oil emulsion on walls complete all as specified and directed. (Note:- Application is done by Mechanical means to any heigh of of bldg with full saftey of labour or manpower and incase of any mishappening contractor is solely responsible). |
| 90 | M&L for preparation of old decorated surfaces of walls/ roof by brooming down with steel wire brushes, scraping down moulds moss and efflorescent salts and treating oil and greasy spots and applying two coat of weather proof coat complete all as specified and directed. (Note:- Application is done by Mechanical means to any heigh of of bldg with full saftey of labour or manpower and incase of any mishappening contractor is solely responsible). |
| 91 | M&L for preparation of old treated surfaces of wall and applying two coat of cement base paint with roller complete all as specified and directed. (Note:- Application is done by Mechanical means to any heigh of of bldg with full saftey of labour or manpower and incase of any mishappening contractor is solely responsible). |
| 92 | M&L for preparation of old painted wood/ wood based surfaces of any description over 10 cm width or grith and applying two coat of synthetic enamel paint complete all as specified and directed. (Note:- Application is done by Mechanical means to any heigh of of bldg with full saftey of labour or manpower and incase of any mishappening contractor is solely responsible). |
| 93 | M&L for preparation of old painted steel based surfaces of any description over 10 cm width or grith and applying two coat of synthetic enamel paint complete all as specified and directed. (Note:- Application is done by Mechanical means to any heigh of of bldg with full saftey of labour or manpower and incase of any mishappening contractor is solely responsible). |
| 94 | M&L for repair of distrubed/ broken brick holes in walls with CM 1:6 including filling of narrow interstices with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) and removal/ root out of trees, plants truncks, grass and creeps from roof or wall, finished with 15mm plaster in CM 1:6 complete all as specified and directed. |
| 95 | M&L for writing letters or figures (Block, Roman, Italic or Indian) not exc. 30 cm high complete all as specified and directed. |
| 96 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed. |
| 97 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 98 | M&L for preparation of new surfaces of plastered of walls and applying two coat of distemper oil emulsion including priming the surfaces and including one coat of wall putty complete all as specified and directed. |
| 99 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement complete all as specified and directed. |
| 100 | M&L for preparation of newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed. |
| 101 | M&L for Rendering 15mm thick on fair faces of brick work or concrete exterior surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required. |
| 102 | M&L for preparation of newly plastered surfaces on exterior wall and applying two coat of cement base paint over two coat of priming the surfaces complete all as specified and directed. |
| 103 | M&L for applying two coat of exterior weather coat over one coat of exterior priming including preparation of surfaces of new walls etc complete all as specified and directed. |
| 104 | M&L for Heritage surface texture in (HST)- Flakes code No 21-2001, 04, 09/22-2204, 05, 0103, 34, 06 of M/s Heritage finish provided all as manufacturers instructions minimum thickness shall not be 1mm to be carried out by trained applicator of manufactures only approved by the GE. Please Enable Macros to View BoQ information |
