|
| 1 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, Protective covering and refilling the trench etc as required |
| 2 | Above 120 sqmm and Upto 400sq.mm |
| 3 | Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size on cable tray as required |
| 4 | Above 185 sq.mm and upto 400sq.mm (Clamped with 40*3mm MS flat clamp) |
| 5 | Supplying and installing following size of perforated painted with powder coating M.S cable trays with perforation not more than 17.5 %, in convenient sections,jointed with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, painting suspended from the ceiling with M.S suspenders including bolts & nuts, painting suspenders etc as required. |
| 6 | 375 mm Width X 62.5mm depth X 2 mm thickness |
| 7 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed/XLPE aluminum conductor cable of 1.1KV grade as required |
| 8 | 31/2 X 300 sqmm(70mm) |
| 9 | Supplying and making indorr cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core,XLPE aluminium conductor cable of 11KV grade as required |
| 10 | 240 sqmm |
| 11 | Supplying and laying 25mm X 5mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut,bolt,spring,washer etc. as required.9Jointing shall be done by overlapping and with 2 sets of brass nut bolt and spring washer spaced at 50mm) |
| 12 | Supplying and Laying of following size DWC HDPE pipe ISI marked along with all accessories like socket,bend,couplers etc. conforming to IS 14930,Part II complete with fitting and cutting,jointing etc in the existing trench,complete as required |
| 13 | 160mm dia (OD-160mm & ID-135mm nominal) |
| 14 | Supplying and fixing cable route marker with 10cm X 10cm X 5mm thick G.I plate with inscription there on, bolted/welded to 35mmX35mmX6mm angle iron,60cm long and fixing the same in ground as required |
| 15 | Supply of 1.1 KV,3.5 C, 300sqmm armoured XLPE aluminum cable. Make : KEI/ Havells/Polycab/RR Kabel/Finolex |
| 16 | Shifting of existing 500 KVA dry Transformer from Power house to Old AC plant (The route is about 1.5Km) |
| 17 | Overhauling and Servicing of 500 KVA dry type Transformer |
| 18 | Supply,Installtion,Testing and commissioning of copper chemical earthing system to achieve earth resistance value of the earthing system below 1 ohm with 80mm dia, 3 meter length MF pure copper earth electrode,suitable copper,clamps,pit cover,high quality earth enhancing compound etc. as required. Make : JVM LPS ltd (Including 50KG compound) |
| 19 | Supply of 3.5 C,240 sq.mm 11KV (Un-earhed) Power cable stranded, compacted circular,aluminum conductor,screened with black extruded semi-conducting compound and copper tape (the conductor screen,XLPE insulation,semi-conducting insulation screen to be applied in tripple extrusion dry-cured process), cores laid up, extruded PVC (Type ST2) inner sheathed,single layer of flat galvanised steel strip armoured and extruded black PVC(type ST2) outer sheathed conforming to IS :7098 part-2Make : KEI/ Havells/Polycab/RR Kabel/Finolex |
| 20 | Supplying,installtion,testing and commissioning of portable fire extinguisher,Co2 type,4.5 Kg capacity, compete with wall mounting bracket and accessories, conforming to relevant IS standards |
| 21 | Providing,supplying and placing fire bucket set comprising 3 (three) numbers of fire buckets,each of 9 litres capacity, made of GI/MS sheet,Painted red with the word \\"FIRE\\"written in white letters,filled with clean dry sand, including MS angle iron stand suitable for holding three buckets,compete in all respects as required at site |
| 22 | Supplying and laying rubber insulating mat conforming to IS-15652, suitable for 11KV installations |
| 23 | Supplying and laying rubber insulating mat conforming to IS-15652, suitable for 415V(LT) installations Please Enable Macros to View BoQ information |
