|
| 1 | Taking down cement plaster on brick or stone walls etc, incl raking out joints, hacking for key scrubbing down with water, etc. |
| 2 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 3 | M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in mortar complete 1:6 |
| 4 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl finished even and smooth (without using extra cement). |
| 5 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:3 incl finished even and smooth (without using extra cement). |
| 6 | M&L for 15 mm thick rendering on stone masonry surfaces in cement mortar 1:4 mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and fair complete all as specified and directed. (Note :- Water proofing compound shall be measured and paid for separately as supply only under relevant item of this schedule) |
| 7 | M&L for preparation of new plaster surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 8 | M&L for complete removal of existing treatment of ceiling and applying two coats of white wash complete all as specified and directed. |
| 9 | M&L preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion white or tint over primer with 1mm wall putty on plastered surface complete all as specified. |
| 10 | M&L Complete removal of existing treatment of old surfaces of walls and applying two coat of distemper oil emulsion incl 1mm thick wall putty and priming plastered and other surfaces with alkali resistant priming paint on plastered surface complete all as specified. |
| 11 | M&L for complete removal of existing treatment of old treated surfaces of walls including washing, rubbing etc. and applying two coats of cement Base paint on walls, ceiling, chajja etc. over a coat ot primer as manufactures instructions with all necessary scafolding etc complete all as specified and directed. |
| 12 | M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer surface |
| 13 | S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified. |
| 14 | S&F 25 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete, fixed in repairs, all as specified. |
| 15 | S&F 25 mm bore nipple suitable for HDPE water tank. (Min wt 45 gms). |
| 16 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor) |
| 17 | M&L for 75 mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate), finished even and and fair as in plinth protection incl joints filling complete all as specified. |
| 18 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing rubbish ouside MD land. |
| 19 | S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6. |
| 20 | All as per item No 19 above but in skirting with and including 10mm thick cement plaster in CM 1:4. |
| 21 | S&F coloured Glazed ceramic tile in verticle surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in CM 1:4 |
| 22 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar incl removal of debries out side MD land. |
| 23 | M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the granite complete all as specified and directed |
| 24 | M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window cills, cooking platforms, shelf and partition pointing in white cement (1:2) using marble dust with admixture of pigment to match with the granite complete all as specified and directed |
| 25 | Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed. |
| 26 | M&L for machine cut polished sadarahalli stone, uniform texture, in one piece in trade and risers, skiring of staircase inlcluding rounding the edge, cutting anti skid grooves 3 Nos in each trade, plastering/screed 15mm thick in CM 1:4 complete as specified and as directed. |
| 27 | S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc, overall size 450mm x 600mm with bowl size 410mm x 550mm x 160mm including fixing cantilever brackets and connecting union to waste pipe complete all as specified and as directed. |
| 28 | Supply and laying of 20 mm dia CPVC pipe SDR 11 & plain CPVC SDE 11 fitting on wall/ceiling or laying in tfloors Iincluding taking down old tubes 20mm dia, complete all as splecified. |
| 29 | All as per item No 28 above but 25mm dia including taking down 25mm dia pipe all as specified and as directed. |
| 30 | S&F in CPVC brass treaded elbow 20 mm fixed with all as specified. |
| 31 | S&F CPVC brass treaded Tee 20 mm all as specified. |
| 32 | S&F viterous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Squatting pan orrisa pattern including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete. |
| 33 | S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specified. |
| 34 | S & F in repair vitreous china white wash hand basin flat back size 550x400 mm incl brackets chain & plug and waste pipe waste coupling 32mm dia etc. |
| 35 | S & F PVC connection 15 mm dia with PTMT nuts of length 450 mm. |
| 36 | S&F in repair 32 mm dia PVC waste pipe for sink and WHB of suitable length complete all as specified. |
| 37 | S&F in repair Mirror cabinet of size 300mmx450mm mirror of selected quality fixed in wall screws complete all as specified and directed.(Make: Prayag/Commander or its equivalent of other makes) |
| 38 | S&F in repairs angle valves male/female threaded 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed ends for iron/CPVC pipes or for unions complete all as specified and directed. |
| 39 | S&F in repair 15 mm bore Fancy type Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 40 | S&F in repair 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed. |
| 41 | S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified |
| 42 | S&F in repair brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flanges |
| 43 | S&F shelf of PTMT fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Min wt 300 gms) |
| 44 | S&F in repairs chromium plated grating 100/75 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified. |
| 45 | S&F assembled ready to use stainless steel grade 304, kitchen plate rack inlcuding top/middle shelves of 1.0mm thick sheet, square hollow supports, including bottom hooks, spoon holes, front and back open, size 915x915mm as approved and specified. |
| 46 | S&F 20mm PP-R Gate valves (brass insert) as per requirement of the site |
| 47 | S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), conrner type 250mm dia complete all as specified and directed. |
| 48 | S&F in repairs 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified. |
| 49 | S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 50 | S&F in repair PVC (SWR) pipes 110 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 51 | S&F PVC (SWR) bends 75mm any radius |
| 52 | S&F PVC (SWR) bends 110mm any radius |
| 53 | S&F in repairs Stainless steel polished curtain rod medium weight 25mm dia with and including support wall bracket of and end knobs of polished stainless steel all as specified. |
| 54 | S&F Stainless steel polished wall brackets for holding curtain rod medium weight all as specified. |
| 55 | S&F in repairs Stainless steel polished end knobs spherical in shape suitable for 25mm rodall as specified. Please Enable Macros to View BoQ information |
| 56 | S&F in repairs Stainless steel polished end knobs spherical in shape suitable for 25mm rodall as specified. Please Enable Macros to View BoQ information |
