|
| 1 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers includingramming, watering and consolidated lead upto 1000 metres, complete in all respects as directed by the E-In-C. |
| 2 | Compaction of earth work & Preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. complete in all respects as directed by the E-In-C. |
| 3 | Construction of granular sub-base by providing close graded material grading - I, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Technical clause 401 of MORT&H specifications. complete in all respects as directed by the E-In-C. |
| 4 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications. |
| 5 | Providing and laying Mech. mixed plain cement concrete 1:4:8with stone aggregate (1 cement: 4 coarse sand: 8 stone aggregate 40mm gauge) including spreading, laying, ramming and consolidating as per requirements and curing etc. but excluding centering and shuttering, complete in all respects as directed by E-in-C. Area as per item no. 1 |
| 6 | Plain cement concrete M-20 grade precast kerb 250mm high with bottom width 165mm and top width 115mm fixed in position on earth base including carriage to site of work complete as per technical clause 408 of MORT&H specifications complete in all respects to the entire satisfaction of E-in-C. |
| 7 | Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-40 grade rubber moulded smooth finish with strong vibratory process and of approved size and design, shape laid in Ordinary Grey Colour and pattern over and including 50mm thick compacted bed of course sand filling the joints with fine sand etc. complete in all respects to the entire satisfaction of E-in-C. |
| 8 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 9 | Cement concrete 1:4:8 With stone aggregate 40mm gauge .mixing by mechanical means using concrete mixer volumetric type. |
| 10 | Providing and fixing steel shuttering for faces of concrete foundations, footings, strips, pedestals, foundation beam, plinth beams (vertical, or battering) and columns etc, below plinth beam. Complete in all respects as directed by E-in-C. |
| 11 | Providing and laying Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth complete in all respects as directed by E-in-C. |
| 12 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 13 | First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth |
| 14 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. |
| 15 | Providing and Applying cement plaster in cement sand mortar 1:5 (1 Cement : 5 Fine Sand) to the walls, columns etc.including providing groove, drip course, Scaffolding, finsihing ,curing etc. Complete in all respects for all heights as directed by the E-in -C |
| 16 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 17 | Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm Please Enable Macros to View BoQ information |