|
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls |
| 2 | Dismantling Brick work - under 3m high |
| 3 | Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 4 | Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 1/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 5 | In Cement Mortar 1:5 |
| 6 | In Ground Floor |
| 7 | In First Floor |
| 8 | Brick partition walls of 10.80cm thickness using best quality Burnt Clay Brick of size 8-3/4” x 4-1/4” x 2-1/4” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 9 | First floor |
| 10 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 11 | Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 12 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 13 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification. |
| 14 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 15 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with One coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 16 | Painting Old wood work with One coat of synthetic enamel ready mixed paint of approved quality and colour in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 17 | Supplying and Fixing Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. |
| 18 | Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 19 | Supplying, laying and jointing UPVC pipes of Class 5 (having working pressure of 10 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting, and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3(2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply - above ground level. |
| 20 | Internal Water Supply - Above Ground Level |
| 21 | 20mm dia UPVC pipe |
| 22 | Supplying, laying and jointing UPVC pipes of Class 5 (having working pressure of 10 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground level / Below ground level. |
| 23 | External Water Supply - Below Ground Level |
| 24 | 25mm dia UPVC pipe |
| 25 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 26 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 27 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 28 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 29 | Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 30 | Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works] |
| 31 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). |
| 32 | Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 33 | Supply and fixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) |
| 34 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 35 | 75mm dia PVC soil pipe |
| 36 | Hire charges for providing Partition wall using 100mm x 75mm Country wood Reepers for Vertical supports and 50mmx25mm reeper for horizontal tie and with 12mm thick commercial Plywood etc complete complying with standard specification |
| 37 | Fabricating, suppling and fixing in position of MS steel framed weldmesh protection by using 50x50mm Ms steel square pipe 3 tires on horizontal direction and 25x25mm Ms square pipe 900mm c/c on vertical direction and covered with 2\\"x2\\" weld mesh. This ms steel square pipe and weldmesh were weld intact on both horizontal and vertical direction and fixed in position by dismantling the RCC or masonry works and redoing the same to original condition. The cost includes MS steel square pipes, weldmesh and labour charges, transportation, charges for electrical consumption etc., complete complying with standard specification |
| 38 | The wooden stage and of size 5.80 x2.00 fixing in position using the vertical and horizontal country wood scantings of size 4\\"x4\\" for vertical membters and 4\\"x3\\" for horizontal members. The wooden stage top should be covered with 12mm thick prelaminated particle board. The cost includes labour charges for cutting to the required size and pasting the prelaminated particle board over the top of the stage and the cost includes materials such as wooden scantings, particle board, nails, paste etc., complete complying with standard specification. |
| 39 | Hire charges for fixing of red colour unitex carpet over the dias as directed by the departmental officers. |
| 40 | Supplying and fixing of approved and design colour unitex carpet over the wooden dias, Floor etc., including cost carpet labour for fixing, Fevcol type gum and as directed by the departmental officers. |
| 41 | Hire charges for Plastic Moulded chairs and Steel Tables including transporting labour for loading and unloading and recollecting the same after the function is over but exculing the labour charges for spreading the chairs etc complete |
| 42 | Plastic moulded chairs |
| 43 | Steel Table |
| 44 | VIP Chair |
| 45 | Supplying, fabricating, erecting and fixing in position of Printed fabric design Screen cloth arrangements using required length of fabric design of approved colour and quality screen cloth and stitching to required size and making necessary arrangements to insert the screen pipe and the bottom should be folded and suspended the screen cloth by fixing Aluminium pipe on walls by dismantling the walls and fixing the pipe and redoing the dismantled walls to original condition etc., complete. The cost includes cost of screen cloth, Aluminium pipe and labour charges for tailoring and pipe works etc., and as directed by the Departmental officers. |
| 46 | Supplying and fixing of cross bars for doors with M.S flats including making, welding charges, transporting etc., complete. |
| 47 | Purchase of Bucket, Mug for bath rooms & Toilets |
| 48 | Bucket Big |
| 49 | Bucket Small |
| 50 | Mug Big |
| 51 | Mug Small |
| 52 | Hire charges for Sofa set |
| 53 | Hire charges for Fridge |
| 54 | Hire charges for Table |
| 55 | Hire charges for Earth excavator wheeled backhoe loader - 0.50m capacity |
| 56 | Supplying and fixing V V pad Votes counting Acrylic Board box |
| 57 | Supplying and fixing acrylic sign board of the required size carrying the matter given by the departmental officers and make necessary arrangements for holding the sign board. The Sign board should be fixed on walls by making holes and fixed with nails, screws etc., The cost includes acrylic board printing labour charges for fixing and nails, screws, rawl plugs and conveyance works etc., complete complying with standard specfications. |
| 58 | Supplying Postal Counting wooden box |
| 59 | Supplying of Postal Counting wooden box of the following sizes using 12mm thick plywood of approved quality and vareity. All the four sides and bottom shall be covered with plywood and the top covered and required size of opening shall be provided on the plywood to insert the postal votes. Neccessary locking arrangements also made for the safety measure etc., complete. The cost includes materials, labour charges etc., |
| 60 | Size 2'x2' |
| 61 | Size 1'6\\"x1'6\\" |
| 62 | Supplying Wooden cell collecting box |
| 63 | Supplying sign board with country wood reeper and Flex in Election day (0.60 x 0.45) |
| 64 | Supplying sign board with country wood reeper and Flex in counting day (0.60 x 0.45) |
| 65 | Supplying sign board with country wood reeper and Flex in counting day (1.20 x 0.60) |
| 66 | Supplying sign board with country wood reeper and Flex in counting day (1.80 x 1.20) |
| 67 | Supplying sign board with country wood reeper and Flex in counting day (1.80 x 0.60) |
| 68 | Supplying sign board with country wood reeper and Flex in counting day (1.20 x 0.30) |
| 69 | Hire Charges for Providing Samiana Pandhal arrangements and removing the same after the counting is over. |
| 70 | Hire charges for barricading arrangements using 10 to 13 cm Casurina Props of tying 60cm below ground level fixing and 2.10m above ground level fixing and 5 to 8 cm dia Casurina Props three rows horizontally horizontally 0.45m above ground level and tying with new coir rope and removing the all materials after the counting is over. |
| 71 | Hire Charges for steel barricading arrangements using 40mm dia GI pipes 1.50m height vertically @ 60cm c/c and tied horizontally with 32mm dia GI pipe 5 rows and welded the pipes both vertical and horizontal directions and removing the same after counting is over. |
| 72 | Hire charges for providing Thattu panthal GI sheet arrangements fixing in roof and stage and stall in cluding cost of nails, bolt and washer and labour etc., complete complying with standard specification in dept. officers. |
| 73 | Hire charges for providing watch Tower for the police viewing the entire site from the top of the tower. The watch Tower shall be madeup of casurina props of 10-13cm dia for vertical members and tied at frequent intervals on horizotal directions with 8-10cm casurina props. On the top wooden platform shall be made by placing 5-8cm casurina props on both directions and over that 12mm thick ply wood shall be placed add fixed with nails etc.,The watch tower including cost of casurina props, plywood, coir, nails and labour charges etc., complete complying with standard specification in dept. officers. |
| 74 | Hire charges for providing arrangement for the light decoration of the ceiling with colour disco cloth, Garland plastic floors and colour frills etc., complete and as directed by the departmental officers. (Hire charges only. The repaired materials should be takewn by contractor after function is over). |
| 75 | Add GST Please Enable Macros to View BoQ information |
