|
| 1 | Demolition of brick/ laterite work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed. |
| 2 | Material and labour for precast cement concrete block masonry with solid blocks made out of PCC 1:3:6, type C-1 with using 20mm graded stone aggregate, exceeding 10cm in width and setting in cement mortar 1:6 etc. complete all as specified and as directed. |
| 3 | Material and labour for 10mm thick rendering in cement mortar 1:4 on fair faces of brick / concrete surfaces and finished even and smooth without using extra cement etc. complete all as specified and as directed. |
| 4 | Material and labour for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of primer including 1.5mm wall care putty complete all as specified and as directed |
| 5 | Taking down and refixing in other opening of chowkats or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frame) including holes for taking out hold fasts or dismantling brick work for holes (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and as directed. |
| 6 | Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frame) including holes for taking out hold fasts or dismantling brick work for holes (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and as directed. |
| 7 | Taking down chowkats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from the frame) including holes for taking out hold fasts or dismantling brick work for holes (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and as directed. |
| 8 | Providing and fixing factory made uPVC white colour Sliding window Three track, area of each window is exceeding 2.00 sqm, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+-0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose. |
| 9 | Supply and fix 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 10 | Supply and fix Fiber Glass Reinforced Plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer complete all as specified and as directed |
| 11 | Supply and fix 30 mm thick Fiber Glass Reinforced Plastic (FRP) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified and as directed. |
| 12 | Supply and fix butt hinges, extruded aluminium alloy with galvanisedmild steel hinge pin, anodised, type B-21 of size 100mm complete all as specified and as directed. |
| 13 | Supply and fix 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 14 | Supply and fix 150mm size extruded aluminium alloy handle fabricated type anodized complete all as specified and as directed. |
| 15 | Supply and fix 200mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 16 | Material and labour for Aluminium anodised snap grid frame work for false ceiling all as specified size of grid 605mmx605mm complete all as specified and as directed |
| 17 | Material and labour for hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long complete all as specified and as directed. |
| 18 | Supply and fix gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions in ceiling flat or sloping in joint less finish with jointing compound and jointing tape complete all as specified and as directed. |
| 19 | Supply and fix 12 mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. |
| 20 | Supply and fix double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 21 | Supply and fix aluminium (Diecast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 22 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, walls, slabs etc. complete all as specified and as directed. |
| 23 | Material and labour for Vitrified dark shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors/vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match screed bed of 15 mm thick of cement mortar 1:6 complete all as specified and as directed. |
| 24 | Material and labour for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 25 | Material and labour for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed. Please Enable Macros to View BoQ information |
