|
| 1 | Cleaning of Jungle including uprooting of vegetation grass etc inc. all as per S.I. 259 |
| 2 | Excavation in foundation in ordinary soil including lift upto 1.50 M and lead upto 30M. Including watering ramming and dressing etc. and disposal of surplus earth as upto a distance of 30 M. from the foundation trenches.etc. required for proper completion of the work.SI.No.251. |
| 3 | Concrete with 4 cm gauge brick ballast Fine sand of 2.25 F.M and cement in proportion of 1:4:8 in foundation and under floor including supply of all materials labour T & P etc. required for proper |
| 4 | M- 150 brick work in 1:6 cement & C. sand in foundation and plinth including supply of all materials, labour and T&P etc. required forproper completion of the work as per specification SINO 303 |
| 5 | R.C.C work with cement approved coarse sand and 2 cm. Gauge approved dalla grit proportion of 1:1.5:3 in R.c.c Column as per S.I no.289 |
| 6 | R.C.C work with cement approved coarse sand and 2 cm. Gauge approved dalla grit proportion of 1:1.5 :3in R.C.C Lighter beam |
| 7 | R.C.C work with cement approved coarse sand and 2 cm. Gauge approved dalla grit proportion of 1:2.4 :3in R.C.C in slab excluding plinth and lintel beamS.I.No 283 |
| 8 | R.C.C work with cement approved coarse sand and 2 cm. Gauge approved dalla grit proportion of 1:1.5:3in R.C.C Slab as per S.I no. |
| 9 | Mild steel iron in plain work such as in reinforced concrete or rein force brick work wrought to required shape as necessary cutting. bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured required to proper completion of the work S.I.No. 504 |
| 10 | M- 150 brick work in 1:6cement & Coarse sand in super structure including supply of all materials, labour and T&P etc. required for proper completion of the work. S.I.No. 303+310 |
| 11 | 12 mm thick plaster on roughface of wall with cement mortar consising of 1 part cement and 6 part of approved Fine sand. Minimum thickness not to be less then 10 mm including supply of all materials, labour and T & P etc. required for completion of work. |
| 12 | same as item no 12 above but in plain surface out side |
| 13 | Earth work in Cutting /Filling in ordinary soil with 3 NO lead including ramming Dressing and Levelling for completion work as |
| 14 | 2.5 cm. thick 1:2:4 plain cement concrete floor with cement coarse sand and 2.00cm. Dalla grit. laid in panels finished with 3mm. |
| 15 | Mild steel or iron work in small size and section such as holding down bolts,hold fast,tie rods,gratings etc (when not included in over all rates ) wrought to required shape as necessary for bending etc including suply of steel and its wastage including cost of bolts,nuts if required,welding,grinding and making holes as required for proper completion of work,but in frames of door/window . as per S.I.No. 502 |
| 16 | Fabrication of Angle iron windows of standard section S.L.N. 502(B) |
| 17 | Fixing of angle iron door frame |
| 18 | Fixing of angle iron window frame |
| 19 | fixing of angle iron ventilator frame |
| 20 | S/F of flush doors , windows as per S.I. 470 32 mm thick double leaf Door Shutters D |
| 21 | for window and ventilator |
| 22 | door D2 W1 |
| 23 | Painting or varnishing new iron works in small areas or new wood with one coat (upto one sqmmetree ) of ready mixed priming painting and one coat of approved superior quality ready mex paint (2nd quality synthetic enamel paint, shalimar, Asian or equivalent as approved by E/I) or VArnish including supply of all materials, labour, T & P etc. required for materials , labour T & P etc. required for proper completion of the work Paint ot be used should confirm the |
| 24 | Painting two coat over primirng coat on new steel and other metal surface upto 10 cm with all material and labour |
| 25 | Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials labour and T & P etc. as per S.I.No. 660 +661 |
| 26 | Supply and fixing of 110mm PVC pipe as rain water pipe |
| 27 | 20 mm thick Plastering in dado with 1:2 cement and fine sand including supply of all materials, labour nd T&P etc. SI 587 |
| 28 | S/f of vetrified tiles size 600x600 mm . |
| 29 | supply of black granite sign board |
| 30 | Lettering and painting of stone board |
| 31 | Wiring point for light with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable in PVC conduite as per S.I. No.131C. |
| 32 | Wiring point for Fan with 1.5 sqmm FR PVC insulated multistrand single |
| 33 | Wiring point for plug with 1 sqmm FR PVC insulated multistrand single |
| 34 | Suppy and fixing of 6 to32 Amp DP MCB (10 KA) as per S.I. 1002 |
| 35 | Supply and fixing of surface/flush mounting 8 way SPN distribution board without MCB copmlete in all respect as per S.I. No. 1022 B. |
| 36 | Suppy and fixing of batten/angle holder complete in all respect as per S.I.No. 405. |
| 37 | Supply and fixing of Hexagonal Fan Box as per S.I. 1149 |
| 38 | s/f of 4800mm size ceiling fan for hall |
| 39 | s/f of 9\\"size exhaust fan for kitchen/TOILET |
| 40 | s/f of c.f.l. 8-18watt |
| 41 | Provision for external connection Please Enable Macros to View BoQ information |
