|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, for all lift, including getting out the excavated soil and disposalof surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Centering and shuttering including strutting, propping etc. and removalof form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, ending, placing in position and binding all complete above plinth level.Thermo Mechanically Treated bars of grade Fe-500D or more. |
| 6 | Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer, including welding and bolted withspecial shaped washers etc. complete.Hot finished welded type tubes. |
| 7 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sidesof foundations etc. in layers not exceeding 20cm in depth, consolidatingeach deposited layer by ramming and watering, lead up to 50 and for all lift. |
| 9 | Centering and shuttering including strutting, propping etc. and removalof form for Lintels, beams, plinth beams, girders, bressumers andcantilevers. |
| 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement :4 coarse sand). |
| 11 | Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry. |
| 12 | Centering and shuttering including strutting, propping etc. and removalof form forSuspended floors, roofs, landings, balconies and accessplatform. |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-IIl) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 15 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 16 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) |
| 17 | Providing and fixing 10 mm thick Stone tiles in required pattern/shape/design for wall lining/cladding over Cement board/plastered masonary work fixed with multisustrate adhesive sealant including pointing with admixture of pigment to match the stone shade complete as per entire direction and satisfaction of engineer in charge. |
| 18 | Providing and fixing of 18 mm thick block board with commercial ply in shelves, racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. with screws and fittings as per complte entire direction and satisfaction of engineer in charge.18 mm thick. |
| 19 | Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing with soft closing hinges marked with necessary screw etc all complete.(Hinges will be paid separetaley) |
| 20 | Providing and fixing stainless steel soft closing spring hinges at required degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. |
| 21 | Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat ofapproved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece. |
| 22 | Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer all complete. |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Distempering with 1st quality acrylic distemper (ready mixed) having VOCcontent less than 50 gram/litre, of approved manufacturer and of requiredshade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 25 | Painting with synthetic enamel paint of approved brand and manufactureTwo or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 26 | Providing and fixing 10 mm polycarbonate sheet in MS structure frame by silicon sealant including NDMC logo or any other design as approved by engineer-in-charge ( MS frame for fixing of Polycarbonate shall be paid separetely). |
| 27 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 28 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 29 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 30 | Providing and fixing of 5 Watt LED cob warm Light including all fitings and wire as approved by engineer in charge in inverted channel or any other location as per site requirement . |
| 31 | Providing and fixing outdoor wall/surface mounted LED sinages screen for optimum resolution , Ip - 67, bightness 6500 nits and above,Pixel P-6, voltage 220-240 VAC frequency 60 Hz, body material Acrylic as per approved by engineer in charge . |
| 32 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over cup board with multisustrate adhesive sealant joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm. |
| 33 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent. |
| 34 | Providing and laying pressed clay tiles (mangalore tiles) of size 200 x 250 mm and 10 mm thick on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. |
| 35 | Providing and fixing Aluminium rolling shutters made of 40 mm x 8 mm extruded aluminium profile interlocked together through their entire length and jointed together at the end by end locks including spring shaft, curtain roll (with lock plate and parande), side guide & bracket plate etc. and locking arrangements with push and pull operation complete as per direction and entire satisfaction of Engineer -in-charge. |
| 36 | Providing and fixing of aluminium casing waterproof backlit light box having 3mm ACP at back side and 6 mm toughened glass at front side with hydraulic rod arrangement for opening and waterproof IP67 LED inside the box for lighting arrangement etc. complete as per direction and entire satisfaction of engineer in charge. |
| 37 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
