|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed |
| 2 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed |
| 3 | Dismentaling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet) etc complete all as specified and as directed |
| 4 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed |
| 5 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed |
| 6 | Taking down shutter of any description area exc 1.00 Sqm but not exc 4.00 sqm each etc complete all as specified and as directed |
| 7 | Hacking out old broken glasses ( any thickness/type and in any position ) from wooden frames/metal frames fixed with oil putty or beads etc and removing from site complete all as specified and as directed |
| 8 | Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including dado any description complete all as specified and as directed |
| 9 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed . |
| 10 | Taking up or down 15 mm bore steel tubing and connections including complete all as specified and as directed |
| 11 | Taking up or down 20 mm bore steel tubing and connections including complete all as specified and as directed |
| 12 | Demolition and breaking up drain pipes up to 100 mm dia bofe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar etc complete all as specified and as directed |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise etc complete all as specified and as directed |
| 14 | Demolition of brick work /stone masonry masonry built in cement mortar of any description all as specified and directed. |
| 15 | Dismantling PVC water tank of capacity Exc 250 Litre and not Exceeding 500 Ltr complete all as specified and as directed |
| 16 | Dismantling PVC water tank of capacity Exc 500 Litre and not Exceeding 1000 Ltr complete all as specified and as directed |
| 17 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 18 | Demoition of Stone slabs and tiles of any description or thickness in floors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed |
| 19 | Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed |
| 20 | Material and labour for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed |
| 21 | Material and labour for Pre-cast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc complete all as specified and directed. |
| 22 | Material and labour for Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and as directed |
| 23 | Material and labour for brick work with sub class \\"B\\" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed |
| 24 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed. |
| 25 | Supply and fix 30mm thick flush door shutter solid core construction with block board core and ply wood face panes, connerical tuype on both sides etc complete all as specified and as directed |
| 26 | Supply and fix 2nd class hard woork rail and style of 32 mm thcik Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and as directed |
| 27 | Supply and fix 2nd class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and as directed |
| 28 | Material and labour for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 29 | Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and as directed |
| 30 | Supply and fix factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed. |
| 31 | Supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed |
| 32 | Supply and fix aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed |
| 33 | Supply and fix 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and as directed |
| 34 | Supply and fix 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed |
| 35 | Supply and fix in repairs CP brass towel rail 60cm long including fitting complete all as specified and directed. |
| 36 | Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed ' |
| 37 | Supply and fix in repairs helical door spring of 150mm long smooth functioning, automatically closing incl welding / reveting etc complete all as specified and as directred |
| 38 | Material and labour for Rolled Mild Stee sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-290(Gde E-165) etc complete all as specified and as directed |
| 39 | Material and labour for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed. |
| 40 | Material and labour for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or for ged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed |
| 41 | Supply and fix in 1.00 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and stapleand one shop coat of primer;erected in position as indicated,complete: push pull manual type complete all as spd and directed |
| 42 | Repair of Steel rolling shutters, with out ball bearing, top cover, anchoring rod, hasp and stapleand one shop coat of primer etc complete including necessary cutting,welding bolting and making good to match with adjoining surface, including taking down and refixing of rolling shutter and necessry gressing for smooth functoning of door complete all as directed by Engr-in-charge. |
| 43 | Supply and fix Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with double rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 44 | Supply and fix Factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with single rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 45 | Supply and fix Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or weldedcomplete all as specified and as directed. |
| 46 | Supply and fix Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed. |
| 47 | Supply and fix steel ventilators with top hung shutter including hinges,steel peg stay, complete all as specified including providing complete all as specified and as directed. |
| 48 | Supply and fix 1.00 mm thick mild steel plain black sheet as in hearths,covering to door shutter including necessary welding complete all as specified and as directed. |
| 49 | Supply and fix flat iron (mild steel) fillets fixed to fly proof steel window shtters with screws or riveted for securing wiring gauze etc and as in wind tiles for roof complete all as specified and directed. |
| 50 | Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 51 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 52 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 53 | Material and labour for 50 mm dia and 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6 mm thick in CM 1:4 mixed with integral WPC on uneven surface to make it even. Fill it water and check for dampness and seepage, all junctions points of side walls where CI/GI pipe are passing shall be sealed with epoxy mortar. Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. Apply 20 mm thick plaster in CM 1:4 mixed with integral WPC of approved make on floors and walls including rounding of corners and junctions stoping towareds spouts. All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on GI/CI pipes. Test the water proofed area by filling water at least 72 hours and tested for leakage/seepage for the entire satisfaction of GE. After above said treatment apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors complete all as specified and directed. (Note : If leakage/Seepage occured after filling water at least 72 hours, the above said treatment will be re-done completely) |
| 54 | Supply and fix false ceiling with suspended system of size 600X600mm of standard section consisting of main runner of size 15X32mmX0.30mm thick , cross Tee (15X32mmX0.30mm) and wall angle (15X15mm X0.30mm , ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with 4 mm thick E board HPSC self textured design pre primered non asbestos fibre cement building boards fixed to false ceiling etc complete all as specified and as directed |
| 55 | Supply and fix in repairs 4mm thick non asbestos fibre cement building board fixed to timber frame work with screws as in ceiling complete all as specified. |
| 56 | Material and labour for Glazed ceramic tiles (Coloured) as in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick in CM 1:4 for backing coat of tiles / dado etc complete all as specified and as directed |
| 57 | Material and labour for Glazed ceramic coloured tiles 300X200X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:4 incl etc complete all as specified and as directed |
| 58 | Material and labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each floor tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:4 incl etc complete all as specified and as directed |
| 59 | Material and labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each Verical tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:4 complete all as specified and as directed |
| 60 | Material and labour for 75 mm thick cement concrete 1:4:8 type D- 2, (Using 40mm graded stone aggregate) as in sub base of flooing etc complete all as specified and as directed |
| 61 | Material and labour for Providing and laying 80 mm thick factory made chamfered edges cement concrete paver block of M-30 grade with approved colour ,design &pattern as in footpath ,pranks lawns,drive ways or light traffic parking etc., of required strength ,thickness &size/shape ,made by table vibratory method using PU Mould,laid in require colour &pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding /laying of inter locking paver blocks into sand bedding layer through vibratory compaction by using plate vibrator ,filling the joints with fine sand and cutting of paver block as per required size and pattern ,finishing and sweeping exra sand compete all as specified and as directed. |
| 62 | Material and labour for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over including in 15 mm thick screed bed CM (1:4 etc complete all as specified and directed. |
| 63 | Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 64 | Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 65 | Supply only water proofing compound (Liquid) complete all as specified and as directed. |
| 66 | Material and labour for Preparing new plastered suface of walls and applying two coats of acrylic distemper white or tinted over a coat of primer etc complete all as specified and as directed |
| 67 | Material and labour for preparation new plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed |
| 68 | Material and labour for preparation old plastered surface of wall and applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over old surface etc complete all as specified and as directed |
| 69 | Material and labour for preparation of old treated surfaces of wall by brooming down or by steel wire brushing and one coat of white wash on wall surfaces complete all as specified and directed. |
| 70 | All as per item No.1 above but one coat of white wash on ceiling all as specified. |
| 71 | Material and labour for applying one coats of acrylic distemper on old plastered surface of walls including preparation complete all as specifed and directed. |
| 72 | Material and labour for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed |
| 73 | Supply and fix 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 74 | Supply and fix 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 75 | Material and labour for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 76 | Material and labour for preparation of new or previously un-treated wooden surfaces of any description exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 77 | Material and labour for preparation of old painted wooden surfaces of girth or width exc 10 Cms and applying one coat of synthetic enamel paint . |
| 78 | Material and labour for preparation of old painted steel surfaces of girth or width.exc 10 Cms and applying one coat of synthetic enamel paint . |
| 79 | Supply and fix for 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified. |
| 80 | Supply and fix for 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified. |
| 81 | Refixing old steel tubing 15 mm bore and connections in new or old position (walls/ceilings/floors etc) after cleaningcomplete all as specified. |
| 82 | Refixing old steel tubing 20 mm bore and connections in new or old position (walls/ceilings/floors etc) after cleaningcomplete all as specified. |
| 83 | Supply and fix 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc etc complete all as specified and directed |
| 84 | Supply and fix PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed |
| 85 | Supply and fix PVC vent cowls of 110mm dia etc complete all as specified and as directed |
| 86 | Supply and fix in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed |
| 87 | Supply and fix 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc complete all as specified and directed |
| 88 | Supply and fix PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed |
| 89 | Supply and fix in repairs vitreous china squatting pan \\"ORISSA\\" patern of size 580x440mm white, with integral foot rests \\"P\\" or \\"S\\" or trap (excluding flushing cistern & flush pipe) incl provisioning of lime concrete bedding complete all as specified. |
| 90 | Supply and fix in repair vitreous china EWC white with 'P' or 'S' trap front or back inlet any pattern excluding flushing cistern & flush pipe but including plastic water closet seat black closed pattern with flat bottom and cover and hinging device complete all as specified. |
| 91 | Supply and fix in repairs PVC flushing cisrern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc 15 mm dai bore PVC connection 450 mm long complete all as specified and as directed |
| 92 | Supply and fix in repairs vitreous china ware wash hand basin white colour flat back of size 550x400mm including CI brackets, CP brass waste coupling 32mm etc complete all as specified. |
| 93 | Supply and fix in repairs 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick commercial plywood with aluminium framed alround fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed. |
| 94 | Supply and fix in repairs CP brass overhead shower 80mm dia round shape and including CP brass shower arm 240mm long with wall flange complete all specified and directed. |
| 95 | Supply and fix in repair bib tap chromium plated cast copper alloy with capstan head wall flange screwed down screwed for iron pipe 15 mm bore complete all specified and directed. |
| 96 | Supply and fix in repair 15 mm angle stop valve cast (male or female thread) copper alloy chromium plated fancy type with capstan head, wall flange screwed down screwed for iron pipe complete all specified and directed. |
| 97 | Supply and fix in repair 15 mm Pillar tap cast copper alloy in single lever with capsten head chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe complete all specified and directed. |
| 98 | Supply and fix in repairs 15 mm Pillar tap cast copper alloy in single lever with capsten head chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe complete all specified and directed. |
| 99 | Supply and fix in repair 15 mm stop valve (male or female thread) cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all specified and directed. |
| 100 | Supply and fix 15 mm stop valve (male or female thread) cast copper alloy fancy type chromium plated with long shank and cup (conceled type) with capston head wall flange etc screwed down screwed for iron pipe complete all specified and directed. |
| 101 | Supply and fix in repair of PVC connection pipe 15 mm dia 450 mm long with PTMT nut complete all specified and directed. |
| 102 | Supply and fix in repairs Health faucet chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube including making connections and fixed in position etc complete all as specified and as directed |
| 103 | Supply and fix PVC waste pipe suitable for 32 mm dia waste coupling for wash hand basin complete all as specified and directed. |
| 104 | Supply and fix in repairs waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms complete all specified and directed. |
| 105 | Supply and fix in repairs Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all specified and directed. |
| 106 | Supply and fix in repairs sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12mm wide with CP brass bracket guard railing 60cm long complete all as specified. |
| 107 | Supply and fix in repairs Viterous China urinals, halfl stall type, complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, incl urinal spreader 15 mm bore, suitable size of 15 mm bore PVC connection 450 mm long and 40 mm dia bore 600 mm long LDPE incl 40 mm dia bore waste coupling etc complete all as specified and as directed |
| 108 | Supply and fix in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all specified and directed. |
| 109 | Supply and fix in repairs Looking mirror of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and as directed |
| 110 | Supply and fix Rotational moulded polyethylene water storage tanks 500 Lit capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I. complete all as specified and as directed |
| 111 | Supply and fix Rotational moulded polyethylene water storage tanks 1000 Lit capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I. complete all as specified and as directed |
| 112 | Supply and fix in repair of 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for iron pipe complete all specified and directed. |
| 113 | Supply and fix in repair of 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for iron pipe complete all specified and directed. Please Enable Macros to View BoQ information |
