|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Material and labour Virified Ceramic tiles 10mm thick ( square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed . |
| 3 | All as item No (02) here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified. |
| 4 | Material and labour non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc. 0.06 sqm but n. exc, 0.11 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed . |
| 5 | Material and labour glazed coloured ceramic tiles 450 x 300m x 7mm thick on vertical surfaces of walls as dado etc set and joined in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in cm 1:4 complete all as specified and as directed . |
| 6 | Material and labour for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed by Engineer-In-Charge. |
| 7 | Material and labour for Chequred cement concrete coloured tiles with glozy finish painted surface size 300 mm x 300 m x 22-25 mm thick laid over and including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed. |
| 8 | Dismantling of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 9 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thick (below or above ground level) complete all as specified and directed |
| 10 | Material and labour for brick work with Old size Fly ash ’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 11 | Material and labour for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete. |
| 12 | Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed. |
| 13 | Material and labour for PCC 1:2:4 type B1 using 20mm graded stone aggragate as in coping/bed blocks, bed plates etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of man hole cover including necessary form work |
| 14 | M & L for 75mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed. |
| 15 | M & L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and as directed. |
| 16 | M & L for 100mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using exra cement complete all as specified and as directed. |
| 17 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' |
| 18 | Supply only Ingergral water proofing compound |
| 19 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified |
| 21 | M & L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 22 | Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if type 3 or any all as per direction by Engr In Charge. |
| 23 | Material and labour for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified |
| 24 | S&F for Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members |
| 25 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 26 | Material and labour for Pre-painted galvalume aluminium zinc coating GI based crimbled steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified |
| 27 | Material and labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified |
| 28 | Material and labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. |
| 29 | Material and labour for applying two coat of Synthetic enamal paint over a coat of red oxide primer on new steel based surfaces exc.10cm width or girth including preparation all as specified and directed. |
| 30 | Taking down cement plaster on bricks etc including raking out joints racking for key scrubbing down with water etc. |
| 31 | Material and labour rendering 15mm thick in CM 1:6 on fair faces of brick/stone wall or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 32 | Material and labour for rendering 15mm thick on fair faces of brick work/stone or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement for mixed with integral water proofing compound at the rate of 3% by weight of cement all as per manufactures instructions incl necessary scaffolding etc for any height complete all as specified and directed. Note : Water proofing compound will be measured and paid separately |
| 33 | S&F for Precast cement Concrete louvres and jallies, 25mm thick Type B0 (1:2:4) using (12.5mm aggregate ) including all mouldings but excluding frame (measured solid), set in cement mortar 1:6 |
| 34 | M & L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper incl one coat of wall care putty complete all as specified and as directed. |
| 35 | M & L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of white cement primer complete all as specified and as directed. |
| 36 | S & F GI tubing 15mm bore medium graded with all fitting and Fixed complete to walls and ceilings or laid in floors, including taking down complete all as specified. |
| 37 | Refixing old steel tubing and connection new or old position on wall or under floor 15 mm bore of pipe complete all as specified and directed by EIC. |
| 38 | S & F GI tubing 20mm bore medium graded with all fitting and Fixed complete to walls and ceilings or laid in floors , including taking down complete all as specified. |
| 39 | Refixing old steel tubing and connection new or old position on wall or under floor 20 mm bore of pipe complete all as specified and directed by EIC. |
| 40 | Material and labour for 75 mm thick PCC 1:4:8 in cement concrete sub floors, sub bases , floors and pavings (using 40 mm graded aggregade ) in foundation for post holes. |
| 41 | S&F in repair CP bib taps 15mm bore dia, fancy type, cast copper alloy capstan head chromium plated, screwed down, screwed for iron pipe complete all as specified and directed. |
| 42 | S&F in repairs vitreous china wash basin white of size 550x400 mm including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed. |
| 43 | S&F (in repairs) vitreous china squatting pan 'Orissa pattern' size 580 x 450 mm white with integral foot rest (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed. |
| 44 | S&F (in repairs) vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified. (Make : Hindware/Cera as approved by GE). |
| 45 | S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC make Dolfine/Commander Champion, complete all as specified. |
| 46 | S&F in repairs for towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed by Engr-in-charge including taking down existing towel rail. |
| 47 | Supply and fix 110mm PVC (SWR) WC connector bent type all as specified and as directed. |
| 48 | S&F in repairs 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 49 | S&F in repairs 15 mm dia fancy type, pillar taps cast copper alloy with capstan head chromium plate screwed dwon high pressure long shank and fly nut screwed for iron pipecomplete all as specified and directed. |
| 50 | S&F in repair PVC connection 15mm size with PTMT nuts, length 450 mm complete all as specified and directed. |
| 51 | S&F in repair PVC flexible waste pipe with PVC cap suitable for fixing to WHB waste coupling in suitable length 32 mm dia omplete all as specified and directed. |
| 52 | Dismantling AC Pipe/ PVC pipes 75/110 mm dia |
| 53 | S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as directed. |
| 54 | All as per item No 54 here in before but fixed to walls with clamps complete all as directed. |
| 55 | S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors all as specified and directed. |
| 56 | S&F in repair PVC(SWR) reducers 110mmX75mm dia. |
| 57 | S&F in repair PVC (SWR) bends 75mm dia any radius complete all as directed. |
| 58 | S&F in repair PVC (SWR) 75mm dia Floor Trap, plain with grating including jointing with solvent cement all as directed. |
| 59 | Dismantling water tanks of capacity exceeding 250 & not exceeding 500 ltrs and removing to store |
| 60 | S&F Rotational moulded polyethylene water storage tanks, tripple layer (cylinderical vertical with closed top) of 500 ltrs capacity hoisted and fixed in position all as specified in SSR Part-I |
| 61 | S&F Rotational moulded polyethylene water storage tanks, tripple layer (cylinderical vertical with closed top) of 2000 ltrs capacity hoisted and fixed in position all as specified in SSR Part-I |
| 62 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. exceeding 250 & not exceeding 500 ltrs |
| 63 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. not exceeding 1000 ltrs |
| 64 | S&F for Gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed |
| 65 | S&F in repairs ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20 mm dia iron pipe or brass ferrule. |
| 66 | Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed. |
| 67 | Taking down chowkats or frames with shutters (without taking off shutters) of any description n exc 1.50 Sqm each all as specified and directed. |
| 68 | Hacking out old broken glass of any thickness/size & any description from wooden or steel frame fixed with clips/putty/wooden beading and S&F with 3.50mm thick ordinary sheet glass fixed with clips and oil putty/wooden beading completed in squares not exc 0.50 Sqm each pane all as specified and as directed. |
| 69 | S&F in repair floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring fixed in floor 140mm long overall length of cover plate complete all as spicified. |
| 70 | S&F in repair powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 71 | S&F for Toughened glass 12mm thick frameless door & fixed with statinless steel handle 250mm long, SS hinges and corner SS cleats, piots, mortice lock, plain/frosted glass as per site requirement complete all as specified and directed. |
| 72 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed. |
| 73 | S&F in repairs stainless steel curtain rod 25mm including brackets fancy type 02 Nos each rod with fixing brackets, stops, rollers etc |
| 74 | S&F in repair for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 75 | S&F for Sheet glass 5.50mm thick, selected quality and glazing with rubber gasket and alu beading as per site requirement in square n exc 0.5 sqm in each pane all as specified and directed. |
| 76 | S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by EIC. |
| 77 | S&F for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as per specified and directed. |
| 78 | S & F 35mm thick, factory made panelled door shutter (two panel), plain, framed with 2nd class hard wood lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and stile as per IS-1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed. |
| 79 | S & F 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed. |
| 80 | -Ditto- as above if windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) |
| 81 | M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and directed. |
| 82 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast. |
| 83 | S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed. |
| 84 | Supply and fix MS butt hinges, 100mm medium weight and fixed all as directed. |
| 85 | S & F 150 mm aluminium anodised barrel tower bolts of extruded section |
| 86 | S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised |
| 87 | S&F Mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia, 300mm leng, with and including a minimum of 6 bolts and nut, four on bolt plate and two on staple plate and fixed |
| 88 | S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring) |
| 89 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified. |
| 90 | S & F machine cut cudappah stone slab 20.25mm thick polished one side for kitchen platform over cement screed base 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl incl rubbing and polishing complete all as specified and as directed. |
| 91 | Material and labour for Granite 16-18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified. |
| 92 | M & L for preparation of old plastered or unplastered surfaces including brooming down or steel wire brushing and applying one coat of white wash on Ceiling complete all as specified and as directed. |
| 93 | Complete Removal of existing treatment on walls including removing dirt, nails, making good holes cracks etc brooming down with steel wire brushing scrapping down smoke soots etc and applying Two or more coats of weather proof exterior acrylic emulsion paint (Appex or equavalent) including providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 94 | M & L for applying one coat of oil bound distemper including prepration of old decorated surfaces of wall by Washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed. |
| 95 | Material and labour Preparation of old painted surfaces of wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified. |
| 96 | Material and labour Preparation of old painted surfaces of steel and iron work over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified. Please Enable Macros to View BoQ information |
