|
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER ARMY No. 1 JODHPUR Name of Work: SPECIAL REPAIR TO BLDG No P- 327 OF MED REGT UNDER THE AREA OF AGE B/R - I OF GE ARMY No 1 JODHPURJOB NO. (i)65/SR (Bldg)/Jodh/ 2025-26 Contract No: GE/JODH (A) No 1 - OF 2026-27 (9401/E8) Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Dismantling of plain or corrugated asbestos cement roof sheet, any gauge, thickness, including ainital or similar pattern roof coverings complete all as specified and directed. |
| 3 | Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at height upto 15mtr complete all as specified and directed. |
| 4 | Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering edges /cladding to wall, fixed with self tapping screws complete at height upto 15mtrs complete all as specified and directed. |
| 5 | Dismantling structural steel as in truss, purlins of any description complete all as specified and directed |
| 6 | M&L framed Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 7 | M&L for Mild steel in flat, round or square bars, in available lengths onforming to Fe 410-0 or Fe 310-0 as in wind tie & other connected work complete all as specified and directed. |
| 8 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hangingdoor fittings (exclusive of steel sheeting or other covering, running rails and guides) andhanging; also fastening and fixing complete confirming to FE 41-0 or Fe 310-0 complete all as specified and directed. |
| 9 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint 1st quality complete all as specified and directed. |
| 10 | M&L for GI frame work for seamless ceiling comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c inteRunning Metreediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2M length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to inteRunning Metreediate channel at 457mm c/c and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and including M&L for applying 02 mm thick plaster of paris over and including supply and fixing 4mm Asbestos cement building boards, plain E Classic board as in ceiling fixed with screws as per manufacturers instructions over the frame work and including taking down old existing ceiling, complete all specified and as directed. |
| 11 | S&F in replacement Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and including 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame fixing at site on PVC frame as per specifications and drawing, including taking down old existing lining all as specified and directed. |
| 12 | Supply & fixing aluminium anodised frame/Partition/Section, made out of aluminium section / aluminium chanel, powder coated (minimum thickness of powder coating not less than 50 micron), for doors, windows, ventilators, Partition with one or more rebate including jointing cleat for fixing etc. complete all as specified and directed. |
| 13 | Supply & fixing anodised aluminium door shutter, made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos and aluminium hinges 04 Nos in each leaf (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed by Engineer-in-Charge.Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ. |
| 14 | Supply & fixing 4.8 mm thick sheet glass ordinary quality in squares not exceeding 0.5Square Metre in each pane and fixed with oil putty etc. as required or as directed complete all as specified and directed. |
| 15 | M&L 12 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber or aluminium frame work complete all as specified and directed. |
| 16 | Supply & fixing aluminium (extruded section) body door closer hydraulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg, ISI marked complete all as specified and directed. |
| 17 | Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 Square Metre but not exceeding 4.00 Square Metre each complete all as specified and directed. |
| 18 | S&F factory made box type window (steel) (BWM) with side hung shutter with or with out coller opening as shown in Drg No CEJZ/TD/20 sheet 1/3 to 3/3 complete with glazing bars, dovetailed or welded complete all as specified and as directedNote :- (i) Both shutter (wherever applicable) will be joined internally with flat iron of size 40x4mm and quoted rate deemed to include the cost component of the same(ii) Guard bar, glass panes & wirecloth shall be measured and paid seprately |
| 19 | All as per item No 17 above but without glazing bars complete all as specified and directed. |
| 20 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 45mmx85mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 508 N /Square Metrem modulus of elasticity 900 N/Square Metrem and resisitence to spread of flame of class A cat with property of being teRunning Metreite / borer proof , water moistur proof and fire retaident and fixed in position With MS hold Fast /SS Dash Fastner incl S&F (03 Nos Per Frame ) 100 mm long SS Butt Hinges complete all as specified and directed. |
| 21 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /Square Metrem and resisitence to spread of flame of class A cat with property of being teRunning Metreite / borer proof , water moistur proof and fire retaident and fixing and incl S&F of 02 Nos (per Leaf) SS 150mm long Tower Bolt and S&F of 02 Nos (per Leaf) SS 150mm long handle complete all as specified and directed. |
| 22 | Demolition stone/marble slabs of any description or thickness as in floors/ cooking platform /steps etc. laid bedded and pointed in any mortar including removing rubbish material from the site complete all as specified and as directed by Engineer-in-charge |
| 23 | Material and Labour for 18-20 mm thick Kota stone slab as approved by GE flooring, mirror polished laid over with and including 15 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Square Metre mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. |
| 24 | Material and Labour for machine cut kota stone slab as approved by GE as in vertical surfaces, 18-20 mm thick laid over with and including 10 mm thick rendering in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Square Metre mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. |
| 25 | Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description complete all as specified and directed. |
| 26 | M&L precast cement concrete block masonry using PCC 1:3:6, type B-1 solid blocks, exc 10 cm in width and setting in cement mortar 1:4, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed. |
| 27 | M&L for 75mm thick machine cut Sand stone slabs in sunshades, chajjas, shelves, cills, landings, plinth protection, manhole cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete complete all as specified and as directed. |
| 28 | Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. |
| 29 | M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.Note -Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. |
| 30 | Racking out joints/pointing to Square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified |
| 31 | M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified and directed. |
| 32 | Applying acrylic thick wall care putty on internal of walls/ceilings (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed. |
| 33 | M&L preperartion of newly plastered surfaces on wall and prepare surface fair finished and even and applying two coat of oil emulsion distemper over a coat of primer complete all as specified & directed. |
| 34 | M&L for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over two coat of birla white putti on plastered surface complete all as specified and directed. |
| 35 | M&L for applying two coats of cement based paint on newly plastered/ unplastered surface of wall including preparation and one coat of chalk white of serfaces complete all as specified and directed. |
| 36 | M&L for applying two coat of cement base paint on old surfaces including preparation complete all as specified & directed. |
| 37 | Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including removal of debris to out side MD land complete all as specified and directed. |
| 38 | Material and labour for 75 mm thick cement concrete 1:4:8 , type D-2 using 40 mm graded stone aggregate as in sub base of floor. finished even and smooth without using extra cement complete all as specified and directed. |
| 39 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size andpattern, finishing and sweeping extra sand; complete. |
| 40 | M&L Factory made precast cement concrete (1:2:4) type B1(using 20 mm graded stone agg) in kerb stone, quion block, apex stones etc set in CM (1:4) incl form work weathering, slightly rounded or chamfered angles and throating all as specifed and directed |
| 41 | Taking down carefully aluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. |
| 42 | Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site complete all as specified and directed.as directed. |
| 43 | Taking down carefully UNSV Submain wiring and Services cable of any size make, type and capacity and depositing at site and making good to the disturbed surfaces complete all as specified and directed. |
| 44 | M&L for Concealed point wiring in wall and surface on roof, garder, pipe and pillar using approved colour coding as per IS Red/ Yellow/ Blue, Black and green for single pahse circuits) with multistandered copper conductor 1.5 Sqmm nominal cross area single core PVC insulated and unsheathed FRLS cable 1100 volts grade ISI 694 marked with valid CML No in and including medium grade PVC concealed conduit of dia not less than 20mm and conduit accessories ISI marked with valid CML No (IS 9537-1983 for wall/ roof/ floor etc with pressed flush metal boxes covered with inner plates & outer plates etc suitable for mounting of Modular switches & sockets including PVC insulated multi standered copper conductor FRLS 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continully conductor to common earth and connecting to earth duly complete all as specified and directed for the following:-One light point controlled by one, one way switch |
| 45 | All as per Sr. item No.43.00 here-in-above, but One fan/ Exhaust fan point controlled by one way switch |
| 46 | All as per Sr. item No.43.00 here-in-above, but One socket outlet 3 pin 5 amps on the independent board controlled by one no 5 Amp switch. |
| 47 | All as per Sr. item No. 43.00 here-in-above, but One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch. |
| 48 | All as per Sr. item No. 43.00 here-in-above, but with using 2.5 Sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for independent 15 Apm point complete all as specified and directed. |
| 49 | All as per Sr. item No. 43.00 here-in-above, but with using 4 Sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent 15 Apm point complete all as specified and directed. |
| 50 | S&F modular switch 1 way 6 Amp, complete all as specified and directed. |
| 51 | S&F modular switch 1 way 16 Amp, complete all as specified and directed |
| 52 | S&F modular socket outlet 2 in 1, 3 pin, 6 Amp, 230 volt flush type complete all as specified and directed |
| 53 | S&F modular socket outlet 2 in 1, 3/5 pin, 5 and 16 Amp, 230 volt flush type ISI marked complete all as specified and directed |
| 54 | S&F modular stepped type electronic fan regulator flush type ISI marked complete all as specified and directed |
| 55 | S&F Ceiling rose,three terminals, bakelite body, 230 volts, complete all as specified and directed. |
| 56 | Supply and fixing replacement LED lights fitting 1 x 20W, 220V, AC decorative box type with driver, holderincluding AC decorative box type with driver, holder including copper conductor cable of suitable size from ceiling rose complete 4 ft long complete all as specified and directed. |
| 57 | S&F bldg security LED Light Luminaire of 35/45 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and as directed. |
| 58 | S&F LED light fitting 1x9W / 1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 59 | S&F in repair 2'x2' energy efficient racess mounting 36 watt LED lumanaries fixing for POP/ snapgrid ceiling housing including LED laps othe accessories and necessary electric connection complete all as specified and directed. |
| 60 | Taking down and refixing/ Hanging only ceiling fan (M.D.. Supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. |
| 61 | S&F replacement sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for a MCB One TPN 63 Amps as incoming and 4 Nos of SPN 63 Amps Out going complete all as specified and directed by Engr-in-charge.Note: MCB/RCCB TPN/SPN/SP measured and paid saperately. |
| 62 | S&F MCB TPN C Curve, 40-100 Amps, 410 Volts complete all as specified and as directed. |
| 63 | S&F MCB C curve type, 10 KA 40-63 Amp, SPN with over load and short circuit protection complete all as specified and as directed. |
| 64 | S&F MCB SP, B Curve, 10 KA 40 Amp, Single Pole with over load and short circuit protection complete all as specified and as directed. |
| 65 | S&F MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall incl dismantling of old UNSV DB all as specified and directed by the Engr-in-Charge. |
| 66 | M&L for sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated and standered copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire conneced with thimple from main DB to sub main DB, drawn in to separate concelead medium grade, ISI marked, non metallic PVC conduit 25mm dia size incl all conduit accessories & fittings/ junction boxes/ inspection covers etc, with and incl cutting chasing and marking good of disturbed surface of wall/floor/ ceiling etc as original by brick work, plasterin, white washing, OBD etc as required. complete all as specified and directed . Note :- Two runs of 6 Sqmm and One run of 6 Sqmm (earth wire) cable including one run of conduit pipe will be measured as one lenght including making good the distrubed surfaces. |
| 67 | M&L in repairs Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC 1:3:6 type C1 in chamber, precast RCC 50mm thick in cement concrete 1:2:4 type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 mm dia with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc complete all as specified and directed. Note : (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead. |
| 68 | Supply, laying and testing in trenches/on wall / in duct/ through protection pipe LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,cross sectional area 16 sqmm4 core complete all as directed. Note : Earth work and brick work measured and paid separately |
| 69 | Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in soft/loose soil ext complete all as specified and directed. |
| 70 | Returning and filling of excvated hard/ dense/loose soil in trenches complete all as specified and as directed. |
| 71 | Removal of excavated material soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 72 | Supply and laying of sand for sand cushioning for cable protection in trenches including punning down of sand layer all as specified and directed. Note :- Punned thickness shall only be measured and paid. |
| 73 | Supply and laying unreinforced Precast concrete cable cover, class LV, type 1, flat size 300 mm x 180 mm x 40mm, complete all as specified and directed. |
| 74 | S&F in replacement of GI tubing , light grade of 40mm bore with fittings as in road crossings for cable protection complete all as specified and as directed. |
| 75 | (i) The contract sum shall be arrived at after deducting amount of schedule of \\"Credit\\" from the Total quoted amount. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
