Tender For Construction 900 Beded District Civil And Superspeciality Hospital, Nurses Training Center & Hostel Buildings At Civil Hospital Complex Thane, Tal.& Dist. Thane. (Providing, Fixing & Supplying Furniture), Thane-Maharashtra

TDR : 54924646

Tender Notice
BOQ

15 Days Left

Thane , Maharashtra

Tender Brief : Tender For Construction 900 Beded District Civil And Superspeciality Hospital, Nurses Training Center & Hostel Buildings At Civil Hospital Complex Thane, Tal.& Dist. Thane. (Providing, Fixing & Supplying Furniture)

Document Fees
₹ 5900 /-

EMD
₹ 5162000.0 /-

Tender Value
₹ 51.60 Crore /-

Submission Date
17-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Veneer Finished False CeilingProviding & Fixing Vineer False Ceiling made up of 19 mm thick BWP (IS710) Grade plywood of requisite manufacture i.e Anchor/Century/Green ply, base fixed to framing of plywood vertical members suspended from ceiling at the inerval 600mm c/c as per approved design & Drawing and finish with 4 mm thick Natural Vineer (IS-1326) of primum quality by approved design and finally finished with melamine polish. As directed by Engineer incharge.
2	Laminated Plywood Partition Providing and fixing 75 mm thick partition wall constructed with framework made from aluminum square sections 50 (B) x 50 (W) x 2.3 (T) mm size, spaced at 600 mm center to center both vertically and horizontally fixed with aluminium corner angle cleat 50 (B) x 50 (W) x 2.3 (T) . The framework shall be covered on both sides with 12 mm thick BWP (IS 710) grade plywood of approved make Anchor, Century, Green ply or equivalent, finished on both faces with 1.25 mm thick Laminate. The work shall include all necessary hardware, fixtures, adhesives, and accessories, executed as per approved drawings and directions of the Engineer-in-Charge.
3	Providing and fixing solid core flush door shutter in single leaf 39 mm thick of exterior grade as per detailed drawings made up of 19 mm block board covered with 9mm plywood on both faces, Laminate with 1mm thick on both faces or as directed, all necessary beads, mouldings and lipping, , mortise lock, 150mm chromium plated handles on both sides, Door Closer, Door Stopper, 6mm toughnned glass for vision pannel completed.
4	Charcol louvers Finished Acoustical Wall PannelingSupply & installation of wall panelling made of Charcol grade Pvc board / fiberglass board louvers made of a composite material comprising charcoal powder, high-grade polystyrene or PVC, resins, and protective additives. Panels shall have a core working blend of charcoal powder, resins, and additives for structural integrity, with a protective top layer for moisture, termite, and mold resistance,backlined with Sound texblack acoustical fleece, tongue-groove edge for a seamless look, Acoustics NRC 0.65-0.75 (For E300* Mounting), size 128x2440x12mm, volume density of base board 800 -830 Kg/m3, 10-10.5Kgs/m2 (L32),Panel thickness: 12 mm,Panel width: 120 mm (0.12 to 0.15 m),Panel length: 2400 mm (2.4 m to 3 m),Finish: Matte/Satin/Glossy.The Panneling shall be finished as per the drawings and to the satisfaction of the Engineer in Charge.
5	Veneer Finished Wall PannelingProviding and fixing 4 mm thick veneer finish wall paneling fabricated from 18 mm thick plywood, with a plywood framework size of 50 x 36 mm (finished size) or as per site conditions, arranged at 600 x 600 mm center to center or as required. The framework shall be covered with 12 mm thick plywood of approved manufacture such as Anchore / Century / Green Ply or equivalent, generally conforming to IS 710-1980. The panels shall be finished with 4 mm thick matching natural veneer of approved color in satin walnut groove-matched veneer pattern and design, including melamine polishing and design, all complete as per the Architect’s drawings and instructions of the Engineer-in-Charge.
6	Laminate Finished Acoustical Wall PannelingProviding and fixing in position acoustical paneling consisting of 12 mm BWR (IS 710) plywood and 1.5 mm laminate of approved make Green ply, Century, Anchor for plywood and Greenlam, Century, Merino for laminate finish, mounted on 50 x 50 mm Sal-wood frame spaced at 600 x 600 mm center to center, securely fixed to the wall with wooden supports of required length; voids within the framework shall be filled with 50 mm thick 1000 GSM synthetic wool, supported by chicken mesh on the wall side; the framework shall be covered with fixed 12 mm plywood and finished with 1.5 mm thick laminate. The work shall include all required cut-outs, decorative moldings, finishing trims, painting, and scaffolding as per Architectural and Acoustical Designs and in accordance with the instructions of the Engineer-in-Charge, complete with all materials, labor, tools, and accessories necessary for satisfactory completion.
7	High Back ChairProviding & Arrangemnt of Featherlight/Wipro or equivalent High Back, Construction & Materials -Backrest: High back with micro‑linear mesh, contoured frame, integrated height‑adjustable lumbar pad.Seat: Fabric‑upholstered moulded cushion with seat‑sliding (depth adjustment) mechanism.Headrest: Cushioned, fixed (non‑height‑adjustable) headrest integrated with back.Base & castors: 5‑star nylon base with 60 mm PU castors.Ergonomic & Functional Features Mechanism: Multilock synchro‑tilt with: Recline lock lever.Tension knob to adjust recline force.Lumbar: Height‑adjustable lumbar support pad to fine‑tune lower‑back support.Armrests: Four‑way adjustable arms (height up / down, front / back, left / right, swivel) for forearm/shoulder support.Height: Pneumatic gas‑lift seat‑height adjustment lever.Dimensions & Weights (From manufacturer spec sheet for Helix High Back.)Chair weight: 23 kg.Seat size: Depth 52 cm, width 51 cm.Overall footprint: Width 67.5 cm, depth 58 cm. Overall height (back): Minimum 122 cm, maximum 198 cm.Seat height adjustment: Minimum 45 cm, maximum 56 cm.Arm‑to‑arm clear width: 46 cm.Armrest height above seat: 18 cm. as directed by Engineer in charge.
8	Mid Back ChairProviding & Arrangemnt of Featharlight/Wipro or equivalent Mid Back chair, Construction & MaterialsBackrest: Micro linear weaved mesh, ventilated medium back (no headrest).Seat: Fabric‑upholstered cushioned seat with sliding (seat‑depth adjustment) mechanism.Base & castors: Nylon 5‑star base with 60 mm PU castors.Ergonomic FeaturesMechanism: Multilock synchro‑tilt with tension control knob to adjust recline force.Lumbar: Height‑adjustable lumbar support pad integrated into back frame.Armrests: Four‑way adjustable arms (height up–down, front–back, left–right, swivel) for forearm support while typing.Height: Pneumatic gas‑lift seat height adjustment with lever operation.Dimensions & Weights (Helix range; medium‑back uses these values with 1 kg lower weight than high‑back.) Chair weight: 22 kg (medium back). Seat size: Depth 52 cm, width 51 cm. Overall footprint: Width 67.5 cm, depth 58 cm. Seat height adjustment: 45 cm (min) to 56 cm (max). Back/overall height range: Approx. 107–180 cm for medium back (spec tables list a combined min/max height of 122–198 cm for the series, but medium‑back is lower in practice; use manufacturer drawing if you need exact back panel height). Arm‑to‑arm width: 46 cm. Armrest height: 18 cm above seat, as directed by engineer in charge.
9	Visitor ChairProviding and supplying on site visitors chair with round 2 mm. thk pipe frame with chrome finish with reinforced pipe inserts having moulded seat and back with nylon back cover with PP armrest hanging back fabric etc. complete.
10	Auditorium ChairSupply, delivery, and installation of Auditorium chairs of requisite manufacturer Wipro/ Godrej / Penworker featuring an ergonomic plush seat and backrest made from moulded polyurethane foam upholstered in durable fabric or polypropylene, supported by a powder-coated mild steel frame securely fixed to the floor with a 4-bolt flange system for stability. The chair includes a push-back mechanism with auto tip-up seating and a Fluimatic slider for smooth adjustment, with seat dimensions approximately 500–580 mm width, 400–500 mm depth, and 400–450 mm seat height, maintained within ±5 mm tolerance. It incorporates an integrated foldable writing tablet made from high-pressure laminate or ABS plastic measuring approximately 268 mm by 292 mm, mounted on a swivel hinge for ease of use on the aisle-side armrest. All metal components are finished with durable powder coating to ensure longevity and ease of maintenance, making this chair suitable for auditoriums, lecture halls, and conference rooms requiring comfortable seating with integrated writing surfaces. including Hardware material, Fixing Adhesive,labour, etc complete as directed by the Engineer-in-Charge.
11	Three Seater SofaSupplying and placing a Three Seater Sofa of minimum size 2.10 x 0.81 x 0.75 meters, made with a solid teak wood frame structure. The hand rest and back rest sides shall be constructed using BWR (IS 304) 19 mm thick plywood fixed over the teak wood frame, with 15 mm PU foam of 32 density on the external sides and 100 mm thick HR foam on the inner sides. An additional layer of approved make polyester of 180 GSM shall be placed over the foam seats to prevent wrinkle lines and to provide a soft feel to the upholstery. The seating cushion shall comprise 75 mm wide elastic webbing of 350 GSM and 2\\" mild steel zig-zag springs arranged diagonally over the frame to distribute stress evenly, with a packing of 25 mm PU foam (32 density) provided above for raising the seat portion at the center. The seat will further consist of 150 mm thick HR foam of 40 density, made up of a combination of 100 mm, 25 mm, and 50 mm thick foam layers. The sofa shall be upholstered with high-quality leatherite or other premium range fabric, stitched with nylon bonded thread for lasting strength, all complete as per approved design and as directed by the Engineer-in-Charge.
12	Double Seater SofaSupplying and placing a Two Seater Sofa of minimum size 1.80 x 0.81 x 0.75 meters, fabricated with a solid teak wood frame structure. The hand rest and back rest sides shall be constructed with BWR IS 304 19 mm thick plywood fixed over the teak wood frame, then cushioned with 15 mm PU foam of 32 Density on the external sides and 100 mm thick HR Foam on the inner sides; over the foam seats, a layer of approved make polyester of 180 GSM shall be placed to prevent wrinkle lines and provide a soft feel on the upholstery. The seating cushion shall be made of 75 mm wide elastic webbing of 350 GSM with 2\\" mild steel zig-zag springs arranged in a diagonal pattern on the frame to evenly distribute stress,supporting a packing of 25 mm PU foam of 32 Density to raise the seat center. This will be topped with 150 mm thick HR Foam of 40 Density, formed from a combination of 100 mm, 25 mm, and 50 mm thick foam layers. The upholstery shall be covered with good-quality leatherite fabric or other premium range fabric, stitched with nylon bonded thread to ensure lasting strength, all executed as per the approved design and directed by the Engineer-in-Charge.
13	Single Seater SofaSupplying and placing a Single Seater Sofa of minimum size 0.90 x 0.81 x 0.75 meters, made with a solid teak wood frame structure, with hand rest and back rest sides constructed using BWR (IS 304) 19 mm thick plywood fixed over a teak wood frame; external sides cushioned with 15 mm PU foam of 32 Density, and inner sides with 100 mm thick HR Foam, overlaid with a layer of approved make polyester of 180 GSM to avoid wrinkle lines and ensure a soft feel on the upholstery. The seating cushion shall be made with 75 mm wide elastic webbing of 350 GSM and 2\\" mild steel zig-zag springs arranged diagonally on the frame for even stress distribution, over which 25 mm PU foam of 32 Density shall be used as packing to raise the seat center; the seat cushion shall further consist of 150 mm thick HR Foam of 40 Density, comprising combinations of 100 mm, 25 mm, and 50 mm thick foam layers. The sofa shall be upholstered with high-quality leatherite or premium-range fabric, stitched using nylon bonded thread to provide long-lasting strength, all completed as per the approved design and as directed by the Engineer-in-Charge.
14	Tandem Chair 3 SeaterSupplying and placing Sleek Cushion 3 Seater Tandem Chair of requisite make Featherlite, Wipro, or Godrej with overall dimensions approximately 1650 mm (L) x 580 mm (D) x 815 mm (H), constructed with a robust mild steel seat and back frame, powder-coated in an approved shade, fitted with high-density PU foam cushions on both seat and back for added comfort, and upholstered in premium leatherite or fabric as approved.The chair shall be provided with chrome-plated armrests and legs, suitable for high-traffic public areas such as auditoriums, waiting lounges, and reception spaces. The unit shall feature fixed armrests on both ends, medium-back ergonomics, and anti-skid floor pads. All metal parts shall be finished with durable powder coating or chrome. The unit shall be factory assembled, free from sharp edges or weld splatter, and installed complete in position, including all materials, labor, transportation, and as approved by the Engineer-in-Charge.
15	Tandem Chair 2 SeaterSupplying and placing Sleek Cushion 2 Seater Tandem Chair of requisite make Featherlite, Wipro, or Godrej with overall dimensions approximately 1100 mm (L) x 580 mm (D) x 815 mm (H), constructed with a robust mild steel seat and back frame, powder-coated in approved shade, fitted with high-density PU foam cushions on both seat and back for added comfort, and upholstered in premium leatherite or fabric as approved. The chair shall be provided with chrome-plated armrests and legs, suitable for high-traffic public areas such as auditoriums, waiting lounges, and reception spaces. The unit shall feature fixed armrests on both ends, medium-back ergonomics, and anti-skid floor pads. All metal parts shall be finished with durable powder coating or chrome. The unit shall be factory assembled, free from sharp edges or weld splatter, and installed complete in position, including all materials, labor, transportation, and as approved by the Engineer-in-Charge.
16	Signages in Brass LettersProviding and fixing individual cut brass letters for hospital signage, size 150-200mm high and 5mm thick, fabricated from approved high-quality brass sheet. Letters to be machine-cut as per specified font and size, surface finished with polished or satin finished as directed. The letters to be securely fixed on walls, boards, or entrances using concealed anchor fasteners or screws/pins as per design requirements and instructions of the Architect.The item includes: Initial sample submission of letters for Architect’s approval.Alignment and equal spacing as directed.Supply of all necessary hardware, adhesives, clamps, scaffolding if required.Final cleaning and polishing after installation.Protection of finished signage until handover.As directed by engineer in charge.
17	Back Painted Glass 12mmProviding and laying 12 millimetre thick Backpainted glass for table top Including chamfering and edages polish etcetera complete. As directed by Engineer in charge.
18	Toughened Back Painted Glass 6mm6 MM Backpainted Extra clear Toughened Glass -: Providing and laying 6 millimetre thick Backpainted toughened glass Wall Cladding/Paneling Including chamfering and edages polish with profile patti of approved colour and size etc complete. As directed by Architect's Drawing and instructions of Engineer in charge.As per Sanction Rate.
19	Acoustical Carpet FlooringProviding and laying 10 mm thick, machine-made tufted cut pile carpet flooring in rolled format of approved make, shade, and pattern, suitable for Auditorium & Seminar Hall use, having a composition of 86% wool and 14% nylon blend or approved equivalent, with a total thickness of 10 mm (effective pile height 9–10 mm ± 5%), minimum pile weight 1250 gm/sqm (±5%), and total carpet weight 2300–2400 gm/sqm (±5%), inclusive of polypropylene or equivalent backing that is termite- and fungus-resistant, laid with suitable foam underlay to achieve a minimum 20 dB sound impact reduction, conforming to ISI or equivalent international fire retardancy standards, supplied in tile form of required size, cut to fit as per site conditions, installed using approved adhesive over the underlay with butt-joined seams, and including all materials, labor, underlay, adhesive, cutting, laying, cleaning, and removal of waste,complete as directed by the Engineer-in-Charge.
20	Acoustical Carpet FlooringProviding and laying 8 mm thick, machine-made tufted cut pile carpet flooring in tile format of approved make, shade, and pattern, suitable for Cabins and Conferance Room use, having a composition of 86% wool and 14% nylon blend or approved equivalent, with a total thickness of 10 mm (effective pile height 9–10 mm ± 5%), minimum pile weight 1250 gm/sqm (±5%), and total carpet weight 2300–2400 gm/sqm (±5%), inclusive of polypropylene or equivalent backing that is termite- and fungus-resistant, laid with suitable foam underlay to achieve a minimum 20 dB sound impact reduction, conforming to ISI or equivalent international fire retardancy standards, supplied in tile form of required size, cut to fit as per site conditions, installed using approved adhesive over the underlay with butt-joined seams, and including all materials, labor, underlay, adhesive, cutting, laying, cleaning, and removal of waste,complete as directed by the Engineer-in-Charge.
21	Executive Officer TableProviding and fixing Executive Officer Table unit consisting of main table, left pedestal, right side table and central keyboard tray, all fabricated from 19 mm thick BWP plywood (IS:710) of approved make (Green Ply / Century / Anchor or equivalent), complete as per drawings and directions of Engineer-in-Charge. Main table of size 3000 x 1200 x 750 mm with 50 mm thick built-up top in 19 mm + 12 mm BWP plywood, finished on top and exposed edges with 6 mm thick Corian solid surface (DuPont Corian / Himacs / Rehau or equivalent) and on internal faces with 0.9 mm thick laminate (Greenlam / Century / Merino or equivalent), all exposed edges with 2 mm PVC edge band, assembled with PVA glue and screws, complete.Left pedestal under main table (left end) of size 600 x 750 x 750 mm in 19 mm BWP plywood with 3 drawers (front heights 100/150/275 mm), drawer sides in 12 mm ply and bottoms in 9 mm ply, mounted on 450 mm long, 45 kg telescopic slides with central lock, brass handles and leveling feet, using hardware of approved make Ozone / Hettich / Hafele or equivalent, complete. Central keyboard tray of size 700 x 300 x 25 mm in BWP plywood with laminate finish, provided as pull-out on 500 mm telescopic slides, tilt/swivel adjustable to working height 650–750 mm, with mouse wing, C‑clamp mount and all accessories, complete.Right side table of size 1200 x 400 x 750 mm in 19 mm BWP plywood, top finished with matching 6 mm Corian solid surface and internal surfaces with 0.9 mm laminate, all exposed edges with 2 mm PVC edge band, complete. Side table to have 3 drawers in the top portion on telescopic slides with central lock and handles of approved make and storage below with one shelf and a shutter in 19 mm BWP plywood with laminate finish both sides, fitted with hinges, lock and necessary hardware, all complete as directed by Engineer-in-Charge.
22	Credenza in Corian FinishSupplying, fabricating, and fixing a credenza (Table Back Unit) of size 2.40 m (L) x 0.45 m (W) x 0.75 m (H) made of 19 mm thick BWP (IS 710) plywood of approved make (Green Ply/ Century/ Anchor), consisting of Top portion with drawer unit(s), Lower portion with openable shelves fitted with shutters, Exterior finished with 6 mm thick Corian approved DuPont Corion, Himacs, Rehau or equivalent make, Interior surfaces finished with 0.9 mm laminate approved make Greenlam / Century/ Merino or equivalent, All edges duly lipped and polished,Complete with all necessary hardware, fittings, and accessories with approved hardware make Ozone/ Hettich/ Hafele or equivalent ( handles,telescopic hinges and locks)as per directed by the Engineer-in-Charge.
23	Corner Table VeneerProviding & Fixing CORNER TABLE VINEER having size 0.60 x 0.60 x 0.45 meter made up of 19 mm thick BWR (IS303) Grade plywood of requisite manufacture i.e Anchor/Century/Green ply as per approved design & drawing and finish with 4 mm thick Natural Vineer (IS-1326) of primum quality in approved design with BTC linning , and finally finished with melamine polish. As directed by Engineer incharge.As per Approved RA (For Measurment consider 600(L) x 600(W) mm) Non SSR As Per Sanction Rate
24	Dining TableSupplying and fixing Dining Table Of Sizes 1.80 X 1.00 m and 0.75 height consist of top made out of 19 mm thick BWP (IS710) Grade Plywood of requisite manufacture i.e Anchor/Century/Green ply as per approved Table Legs and Bottom support made out of Commercial teak wood Exterior Top finish with 1mm thlk outer laminate of Green lam,Century,Anchor or equivalent polish for wood sample should get approved before instalation or as directed by Engineer In charge.
25	File Storage CupboardProviding and fixing an openable file storage cupboard measuring 900 mm width x 450 mm depth x 2100 mm height, constructed using BWP marine plywood of 19 mm thickness conforming to IS 710 standards for approved brands Green Ply, Century, or Anchor, ensuring high moisture resistance suitable for humid environments. The entire body, including sides, top, bottom, and back panel (10 mm thick marine plywood), is fabricated from 19 mm thick IS 710 BWP marine plywood, while shutters are made from 19 mm thick blockboard (IS 1659 compliant),Finished with high-pressure laminate (HPL) sheets of 1 mm thickness externally and 0.8 mm thickness internally from approved brands Green Ply, Century, or Merino on all exposed surfaces, with matching PVC edge banding of 2 mm thickness or bidding with matching polish; features four adjustable shelves of 18 mm thick IS 710 BWP marine plywood , supported by metal pins at 150 mm intervals, shutters mounted on heavy-duty concealed hinges (approved brands: Dorma, Hafele, or Hettich) with premium wave key locks etc completed. As directed by engineer in charge.
26	Center TableProviding & Fixing Center Table Veener having size 0.90 x 0.60 x 0.45 meter made up of 19 mm thick BWP (IS710) Grade plywood of requisite make Anchor/Century/Green ply or equivalent make as per approved design & Drawing and finish with 4 mm thick Natural Vineer (IS-1326) of primum quality in approved design with BTC linning and 12mm Toughnned Glass Top over it, and finally finished with melamine polish. As directed by Engineer incharge.( For Measurment consider 0.90(L) x 0.60(W) meter)
27	Conferance Table Supply, fabrication and installation of conference table of size 5000mm (L) x 1500mm (W) x 750mm (H), table top in 19mm thick IS:710 BWP grade plywood of approved make (Greenply/Century/Anchor), edges built up to 38mm and central 38mm thick longitudinal support with three cantilever supports for stability; all exposed surfaces finished with 4mm thick natural veneer of matching approved make (Greenply/Century/Anchor) and melamine polish, inner/non-visible surfaces in white laminate, integrated footrest along length in plywood/softwood member with Venner finish, and provision for pop-up box for LAN and power cables, complete in all respects. As directed by Engineer incharge.( For Measurment consider 5.0(L) x 1.5(W) meter
28	Officer TableSupplying, fabricating, and fixing Officer Table of size 2.80 m (L) x 1.0 m (W) x 0.75 m (H) with pedestal of size 0.40 m (L) x 0.45 m (W) x 0.65 m (H) consist of one drawer and two selves with openable shutter, and side unit for table of size 0.9 m (L) x 0.60 m (W) x 0.75 m (H) consist of top portion two drawer and below portion with two compartment of two selves with openable shutter and comprising-Table top and sides made of 19 mm thick BWR plywood in 38 mm thick of approved manufacturer (Anchor / Century /Green Ply or equivalent) conforming to IS 710-1980, All edges are finished with liping or Laminate. Exterior finished with 1 mm thick Laminate & Interior finished with 0.9 mm thick laminate of approved make Greenlam / Century/ Merino or equivalent , Hardware should be used of Ozone / Hettich / Hafele or equivalent make, complete as directed by the Engineer in Charge.
29	Credenza Laminate FinishSupplying, fabricating, and fixing a credenza of size 2.40 m (L) x 0.45 m (W) x 0.75 m (H) made of 19 mm thick BWP (IS 710) plywood of approved make (Green Ply/ Century/ Anchor), consisting of Top portion with drawer unit(s), Lower portion with openable shelves fitted with shutters, Exterior finished with 1 mm thick Laminate & Interior surfaces finished with 0.9mm laminate of approved make Green/ Century/ Merino or equivalent,All edges duly lipped and polished,Complete with all necessary hardware, fittings, and accessories of approved hardware make Ozone / Hettich/ Hafele or equivalent ( handles,telescopic hinges and locks), as directed by the Engineer-in-Charge.( For Measurment consider 2.4(L) x 0.75(H) meter )
30	Work Station / Staff TableProviding and fixing staff / work station table of size 2400mm (L) x 600mm (W) x 750mm (H) made of 19mm thick BWP Grade Plywood conforming to IS:710 of approved make Anchor/Century/Greenply, with top edges built up to 38mm and vertical supports in 38mm thickness at 1200mm center to center, finished with 1.25mm thick laminate of premium quality of approved make Greenlam/Century/Merino on exposed surfaces and balancing laminate/inner finish on unexposed surfaces, including continuous footrest 150mm (H) x 38mm (T) x 2400mm (L) in matching plywood/softwood with laminate finish, complete as per approved drawings, as directed by Engineer-in-charge.
31	3 DRAWER PEDISTAL UNITProviding,Fabricating and Fixing of 3 Drawer Pedistal Unit of size 0.40 m (L) x 0.45 m (D) x 0.65 m (H) made up of 19mm BWP plywood (conforming to IS 710) of approved make such as Greenply, Century, Anchor, or equivalent and finished all external surfaces with 1 mm thick Laminated and all internal surfaces including drawers in 0.9mm inner laminate Fitted with necessary Hardware of approved make Ozone/Hettich/Hafele or equivalent. As per given drawing,as directed by the engineer in charge.
32	Reception Table Corion Finish-1Providing and fixing reception table of overall size 6000 mm (L) x 750 mm (D) x 750/1200 mm (H),including the following specifications:Table top and front panel made from 38 mm thick assembly using 19 mm BWP plywood (conforming to IS 710) of approved make such as Greenply, Century, Anchor, or equivalent, clad with 6 mm thick Corian solid surface of approved make such as DuPont, LG Hi-Macs, Rehau, or equivalent.All other exposed panels shall be made from 19 mm thick plywood, finished externally with 1 mm thick decorative laminate and internally with 0.9 mm thick inner laminate. All exposed/touching edges shall be finished with matching lipping or 2 mm thick PVC edge banding.The unit shall include: 1) 3 Nos. three-drawer pedestals, each of size 420 mm (L) x 400 mm (D) x 620 mm (H), constructed from 18 mm thick plywood with a laminated finish.2) 3 Nos. keyboard trays fitted with telescopic slide channels.2) 3 Nos. footrests.4) 1 No. credenza unit of size 1200 mm (L) x 450 mm (D) x 750 mm (H), made from 19 mm BWP plywood (IS 710) of approved make (Greenply, Century, Anchor, or equivalent) and clad with 6 mm thick Corian solid surface of approved brand (DuPont, LG Hi-Macs, Rehau, or equivalent), consisting of a top portion with three drawers and a lower portion with shelves and openable shutters.All drawers and components shall be finished with 0.9 mm thick inner laminate and fitted with high-quality hardware such as channels, handles, locks, and hinges of approved make (Ozone, Hettich, Hafele, or equivalent).Complete in all respects as per design intent, instructions, and approval of the Architect/Engineer.
33	Reception Table Corion Finish-2Providing and fixing reception table of overall size 5500 mm (L) x 750 mm (D) x 750/1200 mm (H),including the following specifications:Table top and front panel made from 38 mm thick assembly using 19 mm BWP plywood (conforming to IS 710) of approved make such as Greenply, Century,Anchor, or equivalent, clad table top and all external surface with 6 mm thick Corian solid surface of approved make such as DuPont, LG Hi-Macs, Rehau, or equivalent.All other exposed panels shall be made from 19 mm thick plywood, finished externally with 1 mm thick decorative laminate. All exposed/touching edges shall be finished with matching lipping or 2 mm thick PVC edge banding.The unit shall include:1) 2 Nos. three-drawer pedestals, each of size 420 mm (L) x 400 mm (D) x 620 mm (H), constructed from 18 mm thick plywood with a laminated finish.2) 2 Nos. keyboard trays fitted with telescopic slide channels.2) 2 Nos. footrests.All drawers and components shall be finished with 0.9 mm thick inner laminate and fitted with high-quality hardware such as channels, handles, locks, and hinges of approved make (Ozone, Hettich, Hafele, or equivalent).Complete in all respects as per design intent, instructions, and approval of the Architect/Engineer.
34	Reception Table Corion Finish- 3Providing and fixing reception table of overall size 4000 mm (L) x 750 mm (D) x 750/1200 mm (H),including the following specifications:Table top and front panel made from 38 mm thick assembly using 19 mm BWP plywood (conforming to IS 710) of approved make such as Greenply, Century, Anchor, or equivalent, clad table top and all external surface with 6 mm thick Corian solid surface of approved make such as DuPont, LG Hi-Macs, Rehau, or equivalent.All other exposed panels shall be made from 19 mm thick plywood, finished externally with 1 mm thick decorative laminate. All exposed / touching edges shall be finished with matching lipping or 2 mm thick PVC edge banding.The unit shall include: 1) 2 Nos. three-drawer pedestals, each of size 420 mm (L) x 400 mm (D) x 620 mm (H), constructed from 18 mm thick plywood with a laminated finish.2) 2 Nos. keyboard trays fitted with telescopic slide channels.2) 2 Nos. footrests.All drawers and components shall be finished with 0.9 mm thick inner laminate and fitted with high-quality hardware such as channels, handles, locks, and hinges of approved make (Ozone, Hettich, Hafele, or equivalent).Complete in all respects as per design intent, instructions, and approval of the Architect/Engineer.
35	PATIENT EXAMINATION TABLEProviding and fixing Examination table of overall size 1850 mm (L) x 600 mm (D) x 800 mm (H),including the following specifications:Table top and front panel made from 38 mm thick assembly using 19 mm BWP plywood (conforming to IS 710) of approved make such as Greenply, Century, Anchor, or equivalent, clad with All other exposed panels shall be made from 19 mm thick plywood, finished externally with 1 mm thick decorative laminate and internally with 0.9 mm thick inner laminate. All exposed/touching edges shall be finished with matching lipping or 2 mm thick PVC edge banding.The unit shall include:1) 1Nos.of drawer on both sides( Left and aright )of Size 500 mm (L) x 450 mm (D) x 150 mm (H) and 1 Shutter each of size 500 mm (L) x 450 mm (D) x 600 mm (H), and 2 Drawers in center including standing unit of size constructed from 650 mm (L) x 450 mm (D) x 150 mm (H) 18 mm thick plywood with a laminated finish..All drawers and components shall be finished with 0.9 mm thick inner laminate and fitted with high-quality hardware such as channels, handles, locks, and hinges of approved make (Ozone, Hettich, Hafele, or equivalent).Complete in all respects as per design intent, instructions, and approval of the Architect/Engineer.
36	Main Desk Corion FinishedProviding and Fixing Main Desk for stage of size 7500mm (L) x 750mm (W) x 750mm (H) in five parts, constructed from 19mm thick BWP grade plywood conforming to IS:710 of approved make Greenply / Century / Anchor or equivalent. Tabletop in 19mm thick plywood with additional 150mm wide member along the front edge to achieve 38mm built-up thickness for structural stability and enhanced appearance; vertical supports in 19mm plywood, built up to 38mm thickness as per drawing. All exposed top and front surfaces finished with 6mm thick solid surface of approved make (DuPont Corian / LG Himacs / Rehau or equivalent) in approved shade, with all visible plywood edges doubled and fully clad with solid surface or matching finish. Footrest in BWP plywood of required size as per architectural details, finished to match design intent, and all interior/non-visible surfaces finished with 0.9mm thick laminate. Work to include all necessary adhesives, fasteners, edge treatments, polishing and hardware, executed complete as per approved drawings and as directed by the Engineer‑in‑Charge.
37	LABORATORY BENCH CONSITS OF SIZE 2400LX1200WX900H Storage Cabinets of 6001S1S - 4 nos, Supply and Installation of Laboratory Workbenches /Storage units including granite worktops and other supporting structures/hardware’s based on the specified Make List. includes delivery to ABC, unloading the consignment and transporting it from the place of storage to the installation site. Supply & Installation of all utility service outlets and accessory fittings, electrical receptacles, plumbing and electrical switches & fittings identified on drawings as mounted on the laboratory furniture. Supply & Installation of all laboratory sinks, bottle traps, drain troughs etc. including service structures where specified and setting in place reagent shelves of the type shown in the drawings & removal of debris, dirt and rubbish accumulated as a result of installation/commissioning of the laboratory furniture and accessories and leaving the premises broom clean and orderly. ali Furniture shall meet the performance requirements and should follow SEFA 8 guidelines. a.Floor Based Cabinet with Metal Skirting •Welded cabinet body should be flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. •It should be relocated anywhere easily as it is an independent unit. •Cabinet should of square non-sharp edge construction. • Doors should be assembled with SS-304 hinge assembly. •Removable back panel should be provided to easily access the service lines running behind the cabinet benches. •Intermediate horizontal channels should be provided between door and drawer. •Toe-space of 90mm X 90mm is provided at front-bottom side of cabinet. •Levelers are provided for easy leveling of welded cabinet. •Shelf should be eight-bend panel with 20mm height. •Drawer tray should be of single piece construction. Drawer should be well supported on LH and RH ball slide suspension system. •Steel door and drawer front should be of double wall construction with sound dampenening material filled inside. •Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction •Dimensions: W=300/450/580/600/750/900 mm, D = 530mm, H = 875/725 mm •Configurations: 1 Shutter + 1 Drawer/4 Drawers/Leg Spaces/1 Shutter/2 Shutters/3 Drawers/2 Shutters + 1 Drawer/Sink Unit + 2 Shutters •MOC: MSCRCA: IS – 513 (1994)
38	WardrobeProviding and fixing an openable wardrobe measuring 900 mm width x 450 mm depth x 2100 mm height, constructed using waterproof grade plywood of 19 mm (IS -710) thickness for the approved brands Green Ply, Century, or Anchor. The entire body and shutters are fabricated from 19 mm thick waterproof plywood, finished with high-pressure laminate (HPL) sheets of 1 mm thickness from approved brands Green Ply, Century, or Merino, applied on both exposed surfaces with matching PVC edge banding of 2 mm thickness or bidding for all exposed edges to ensure durability and aesthetic finish. The cupboard includes four adjustable shelves made from 19 mm thick waterproof plywood, finished similarly with HPL on both sides, supported by metal pins or clips for height adjustability at 150 mm intervals; four shutters are mounted on heavy-duty concealed hinges (approved brands: Dorma, Hafele, or Hettich) with provision for locking using premium wave key locks, ensuring secure file storage for office or hospital environments.As directed by engineer in charge.
39	Providing & fixing Shutter & Shelf to Wall Cupboard having size of 2400mm(L) x 600mm(D) x 750mm(H) made up of BWP (ISI-710) 19 mm thick plywood of requisite manufacture i.e Anchor/Century/Green ply to frame work, shutter & shelf finished with externaly 1mm thick Laminate and internaly with 1mm thick inner white laminate, Door edges are finished with required size wooden bidding patti with matching shade melamine polish and including all neccessary hardwares and fittings etc. As directed by Engineer incharge.
40	Single BedProviding and fixing a single bed measuring 2000 mm in length x 1000 mm in width x 500 mm in overall height, with the outer frame constructed from 19 mm thick BWP (Boiling Water Proof) marine plywood conforming to IS 710 standards from approved brands Green Ply, Century, or Anchor; the frame features a 38 mm thickness and 200 mm height for the perimeter structure, including headboard and footboard panels. The internal frame includes vertical cross members of 200 mm height and 38 mm thickness, made from 19 mm thick BWP marine plywood spaced 300 mm center-to-center for support, topped with a horizontal 19 mm thick BWP marine plywood slat platform for mattress placement, all ensuring structural integrity and moisture resistance suitable for hospital environments. The bed is supported on four wooden legs of 100 mm x 100 mm cross-section, made from teak wood, providing the required 500 mm overall height; all wooden components are finished with 1 mm thick high-pressure laminate (HPL) sheets from approved brands Green Ply, Century, or Merino on exposed surfaces, applied using adhesive and finished with bidding of matching colour, including provision for standard mattress placement, all hardware such as brass screws and brackets for assembly, transportation, installation, and testing as per site conditions in hospital or office settings.
41	Raised Platform (Dais)Providing and fixing raised platform comprising MS framework in 38mm x 38mm x 3mm square hollow section in grid of 600mm x 1200mm center-to-center, welded, cleaned and finished with two coats of synthetic enamel over suitable primer. MS frame top fixed with 19mm thick BWP Grade plywood (IS:710) and vertical risers in 19mm thick BWP plywood, all fixed with self-tapping screws. All exposed vertical plywood surfaces finished with 1.0mm thick laminate of approved shade and make, top finished with 6mm thick wooden flooring as specified by Architect, and all exposed edges protected with aluminium edge guard of approved profile and finish, complete with all materials, accessories and labour as per approved drawings, technical specifications and directions of Engineer-in-Charge.
42	MirrorProviding & Fixing 450 x 2100 mm Size Superior type 10 MM Thick Mirror of requisite manufacture i.e Modi Guard,Ashi Flot and Saint Gobain or equivalent make with the help of 3M adhesive tape and Areldite glass adhesive on 19 mm thick BWR (IS303)Grade plywood of requisite manufacture i.e Anchor/Century/Green ply with border frame of 50mm wide finished with Natural Vinner,edges with bidding and finally finishes with melamine polish etc.complete, as directed by Engineer in charge.
43	Providing and Fixing Mural on provided surface by an Artist as per approved by Engineer In Charge.
44	MEDICINE STORAGE RACK Providing and fabricating a medicine storage rack measuring 900 mm length x 1800 mm height x 400 mm depth, constructed from 0.8 mm thick CRCA (Cold Rolled Close Annealed) mild steel sheets conforming to IS 513 Grade J430 standards, with frame and body reinforced by 25 mm x 25 mm x 1.2 mm thick CRCA square tubes for structural stability and load-bearing capacity up to 100 kg per shelf; includes four adjustable shelves of 0.8 mm thick CRCA perforated sheets for ventilation and easy cleaning, shutter frames fabricated from 0.8 mm thick CRCA sheets with sliding doors on heavy-duty aluminum tracks (top and bottom mounted, 20 mm width x 2 mm thick channels with nylon rollers) for smooth operation, and panels fitted with 4 mm thick toughened glass (conforming to IS 2553) for visibility and protection of contents; equipped with a central locking arrangement using a premium cylindrical cam lock with two duplicate keys (brass or stainless steel) integrated into the sliding mechanism for security, all surfaces pre-treated with phosphating and finished with epoxy powder coating (60-80 microns thick) in neutral white or grey shade for corrosion resistance and hygiene in hospital pharmacy settings; including all hardware such as nylon bushings, screws, and wall-mounting brackets if required, transportation, installation, and testing as per site conditions.
45	Toughned Glass PartitionSupply, fabrication, and fixing of single glass partition system using extruded aluminium sections (e.g., 102x45x1.5 mm or 45x25 mm profiles in 6063-T6 alloy) from approved makes like Vedic (Mercury/Venus series), Dorma (UNIQUIN), Hafele (frameless glass profiles), Hettich (modular fittings), or equivalents such as Fenesta or TOSTEM, including vertical mullions, horizontal transoms, and head tracks as per approved drawings. Incorporate 10 mm clear toughened glass (or 12 mm laminated) fixed with rubber gaskets and glazing clips for flush, acoustic, and thermal performance; aluminium sections anodized (AC15 grade) or powder-coated (60 microns, e.g., silver, black, or graphite); include stainless steel hardware like locks, handles, and seals; ensure fire safety and structural integrity per relevant IS standards. All joints sealed with silicone, aligned for demountable relocation, and tested for load-bearing up to 3 meters height.
46	Toughned Glass DoorSupply, fabrication, and fixing of single glass door for aluminium extruded partition system (e.g., Vedic Venus 45 with pivot/frame glass door, Dorma UNIQUIN with hinges/patch fittings, Hafele frameless profiles, Hettich/GEZE heavy-duty hinges, or equivalents like Blum/TOSTEM), including 12 mm clear toughened glass with pencil-polished edges fixed in 102x45x1.5 mm or 45x25 mm anodized aluminium sections (silver or black finish, AC15 grade). Incorporate stainless steel hardware such as top/bottom patches, floor springs, SS brushed handles (45-60 cm long, 2.5 cm dia), mortise locks with nightlatch or bathroom function, and EPDM gaskets for sealing; door size typically 90x210 cm or 80x210 cm for swing/pivot operation. Ensure 180° opening where applicable, rebate depth 24-40 mm for glass, and alignment with partition frames per approved drawings, with silicone jointing for flush finish and fire safety per relevant IS standards.
47	Hospital Curtain For Beds & Examination TableSupply, installation, and fixing of superior quality hospital-grade curtain comprising fire-retardant stain-proof fabric with anti-microbial treatment, complete with nylon mesh top, heavy-duty nylon roller hooks, anodized aluminum ceiling-suspended track system with adjustable pipe suspension, wall brackets, stoppers, and all necessary accessories. All labor charges for fixing, alignment, and finishing included as per site conditions and specifications. As directed by Engineer in charge.
48	Hospital Grade Fabric Curtain For WindowsProviding and fixing hospital-grade fabric curtains (fire-retardant, antimicrobial, washable), complete with approved hospital curtain tracks (powder coated aluminum/ alloy), curtain runners, hooks and all necessary accessories, of required size, including cutting, hemming, stitching, hanging, and installation at all heights as per architectural drawings and instructions.
49	Windows Rollar BlindsProviding, supplying, and fixing fabric roller blinds with factory-finished aluminium cassette pelmet (box type) including ,High-quality polyester or blended fabric (0.3-0.4 mm thickness) with UV resistant and anti-fungal coating, approved color and design. Extruded aluminium roller tube (minimum 38 mm diameter), powder-coated or anodized. Aluminium pelmet with powder-coated/anodized finish, approx. 80–100 mm height, fully enclosing the roller mechanism with matching end caps. Aluminium extruded bottom rail, powder-coated finish. Operated by stainless steel / plastic bead control chain with spring / wrap clutch mechanism. Complete mounting brackets for wall or ceiling installation, fixing accessories, and fasteners. Site installation, testing, and commissioning as per manufacturer’s guidelines and Engineer-in-Charge instructions.
50	MEDICAL STOOL Supply, fabrication, and delivery of medical stool with round plate top seat (diameter 300 mm, SS 304 brushed finish, 1-2 mm thick), supported by central column with revolving screw mechanism for height adjustment (range 450-690 mm or 18-27 inches, manual crank or threaded screw for precise control), and round plate leg base (diameter 400-500 mm 4-5 tubular SS legs 25x25 mm or MS equivalent, fitted with PVC stumps or 50 mm swivel castors for mobility). Include optional SS foot ring for support, anti-microbial cushioned seat (if specified, 90 mm thick vinyl fire-resistant to BS-476), and powder-coated epoxy finish (60 microns) on non-SS parts for corrosion resistance; ensure 360-degree swivel rotation, load-bearing up to 150 kg, and foldable design where applicable, conforming to IS:8123 for hospital furniture stability and hygiene. Assembly includes machine screws for height lock, with overall dimensions approx. 46x46x50 cm folded or 300 mm top x 450-690 mm H. As directed by Engineer in charge
51	Providing and fixing double scaffolding system (cup lock type) on the interior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S.tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc.and maintaining it in a serviceable condition for execution of work of MEP services, False Ceilings, Cat-walk in MS,etc and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc,wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.
52	Providing and executing deep cleaning services including thorough cleaning of floors, walls, skirtings, doors, windows, fixtures, and furniture in occupied/finished areas. The work includes removal of stubborn stains, grease, and dirt using approved cleaning chemicals such as disinfectants, descalers, and degreasers; mechanical scrubbing and polishing where required; manual scrubbing of corners and edges; high-level dusting and cobweb removal; cleaning and disinfection of all frequently touched surfaces like switches, handles, and railings; shifting and repositioning of loose furniture/equipment as necessary; collection and safe disposal of debris and waste to designated locations. All cleaning shall be done with appropriate tools, tackles, machinery (single-disc scrubber, vacuum cleaner, etc.), consumables, and personal protective equipment for workers. Complete as per the directions of the Engineer-in-Charge.
53	SITC of Designer Acoustic Cladding1) The designer acoustic cladding shall be made up of Modular Rigid PVC metal Panelling, PET Panelling & Fabric Cladding.2) Metal Panelling:- Factory made removable type Modular Metal Panelling system. The front sheet shall be constructed from preformed textured hot-dip galvanized metal with a rigid polyvinyl-chloride (PVC) film on one side and a rust-resistant coating on the other side. The sheet thickness shall be no less than 0.6mm. The overall system thickness shall range between 80-90mm.The metal panelling/partition shall be Greenguard Gold Certified from (UL / Intertek). Valid certificate to be submitted along with the technical bid.2.1) Tiles Perforation on Metal Panelling – To achieve acoustics without deteriorating the aesthetical appeal of the room it is necessary that the wall panelling shall have micro-perforations (less than 1.6mm diameter each) atleast 25% of the panelling area with a density of 5000 holes per square feet. UL audit certified design feature on modular wall panelling tile having clean perforations and providing smooth finish on Locking arrangement enables easy replacement without using any tool within 120 seconds. The feature shall provide easy flexibility of locking all tiles in one column through gravity. Valid UL audit shall follow a bottom-to-top manner, with the bottom face of the panels resting on the skirting. The fabric panel shall be minimum 25mm thick, with overall system thickness of minimum 65 to 75 mm.4) PET panelling shall be computationally generated panelling form made up of polyethylene terephthalate, the material shall be resistant to moisture. The elements shall be arranged in a defined pattern with proper spacing. The panels shall be fixed on bison board/painted walls/steel structure with appropriate fixing/installation method. The proposed acoustic panels shall be Greenguard Gold certified/tested (from UL/Intertek). The panels should be available in 9mm & 12mm thickness. Material NRC should range between NRC: 0.8 - 0.85.5) The structural framework shall include vertical tubular galvanized iron (GI) pipes securely installed between top and bottom GI frames. certificate to be submitted along with the technical bid. front fascia of tiles. The tile shall have 5000 holes per square feet on front side of the tile. Valid UL audit certificate to be submitted along with the technical bid.2.2) The modular metal panelling does not contain hazardous substances and we give a healthy life to our coming generations it is necessary that the modular metal panelling system shall be RoHS certified (from UL / Intertek). Valid certificate/test report to be submitted along with the technical bid.2.3) The metal panelling shall sustain the seismic vibrations as per design spectrum IS 1893 for zone 4 or better vibrations. The test shall be carried out by authorized government agency. Test Report to be submitted along with the technical bid.2.4) The wall panelling shall be robust & strong enough to sustain the routine loads/minor impacts of typical room environment. The wall panelling/partition structure shall have UL audit certified feature of Load bearing capacity of 300 Kgs to hold any display unit on clamp having minimum length of 750mm. Valid UL audit certificate to be submitted along with the technical bid. 2.5) In an unlikely case of damage to the existing wall panelling tiles the same shall be replaceable within 120 seconds and thereby preventing loss of time of operators and ongoing operations. UL audit certified feature of modular wall panelling tile having secure locking arrangement for equidistant mounting. 3) Fabric Cladding Factory-made removable type modular fabric paneling system. The panel shall be constructed using aluminum extrusions frame, which are fastened on structure using fixing clamps with self-drilling screws. The fabric panels are designed to stretch the fabric in all directions tightly wrapped around the aluminum frame, and held securely using custom EPDM gaskets. Vertical tubular GI pipes shall be securely installed between the top and bottom GI frames and connected to the wall using wall clamps. Two adjacent vertical GI pipes shall be connected by horizontal reinforcements, if required. The panels shall include provisions for acoustic foam backing, and a minimum 100 mm skirting shall be provided to screw in alignment with the structure. The aluminum frame installation shall follow a bottom-to-top manner, with the bottom face of the panels resting on the skirting. The fabric panel shall be minimum 25mm thick, with overall system thickness of minimum 65 to 75 mm.4) PET panelling shall be computationally generated panelling form made up of polyethylene terephthalate, the material shall be resistant to moisture. The elements shall be arranged in a defined pattern with proper spacing. The panels shall be fixed on bison board/painted walls/steel structure with appropriate fixing/installation method. The proposed acoustic panels shall be Greenguard Gold certified/tested (from UL/Intertek). The panels should be available in 9mm & 12mm thickness. Material NRC should range between NRC: 0.8 - 0.85.5) The structural framework shall include vertical tubular galvanized iron (GI) pipes securely installed between top and bottom GI frames.
54	SITC of Designer Acoustic Partition1) The designer acoustic partition shall be made up of Modular Rigid PVC metal partition, PET Panelling & Fabric Cladding.2) Metal Parition:- Factory made removable type inter lockable panels. The frame shall consist of 25mm wide extruded aluminum top & bottom sections & die casted aluminum caps at extreme end, this frame shall hold front sheet. Front sheet shall be made up of preformed textured hot dip galvanized sheet with rigid polyvinylchloride (PVC) film on one side and on the other side a coating to avoid rust (sheet thickness 0.6mm). Overall system thickness for partition shall be 135mm to 145mm.3) Factory-made removable type modular fabric partition system. The panel shall be constructed using aluminum extrusions frame, which are fastened on cement fibre board using fixing clamps with self-drilling screws. Cement fibre boards shall be fastened on the structure using cement fibre board screws. The fabric panels are designed to stretch the fabric in all directions tightly wrapped around the aluminum frame, and held securely using custom EPDM gasket.Vertical tubular GI pipes shall be securely installed between the top and bottom GI frames and connected to the ceiling using partition bracing. Two adjacent vertical GI pipes shall be connected by horizontal reinforcements, if required. The panels shall include provisions for acoustic foam backing, and a minimum 100 mm skirting shall be provided to screw in alignment with the structure.The aluminum frame installation shall follow a bottom-to-top manner, with the bottom face of the panels resting on the skirting. The fabric panel shall be minimum 25mm thick. 4) PET panelling shall be computationally generated panelling form made up of polyethylene terephthalate, the material shall be resistant to moisture. The elements shall be arranged in a defined pattern with proper spacing. The panels shall be fixed on bison board/painted walls/steel structure with appropriate fixing/installation method. The proposed acoustic panels shall be Greenguard Gold certified/tested (from UL/Intertek). The panels should be available in 9mm & 12mm thickness. Material NRC should range between NRC: 0.8 - 0.85.5) The structural framework shall include vertical tubular galvanized iron (GI) pipes securely installed between top and bottom GI frames.
55	SITC of Fire Rated Cum Acoustic Wooden Door - of 120 mins. (30-32db Approx.) (2400mm (H))1) ISO 9001:2015 certified Fully Insulated One Numbern Metallic Wooden Fire door at all Levels. 2) Fire doors satisfy the requirement of latest NBC 2016 Part 4 for Fire & Life Safety guidelines for 120 minutes Fire Rating with 20 minutes Insulation properties along with its Stability & Integrity for 120 minutes. 3) Wooden Fire door carries 120 minutes Insulation properties. 4) The Prototype fire door sample carry a prior test evidence as per IS 3614 part-2 / BS 476 Part 20 & 22 .The offered test certificate should either carries it's Validity or certificate must not be older than 5 years from CBRI / NABLAccredited Lab i.e Spectro or by any accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 fortesting and calibration scopes shall be eligible. 5) The door must carry the Batch sticker with scanning options for offered door details. The offered test report evidence must be FR/0378 or equivalent for 52mm thick Wooden fire doors.Door Frame 1) Door frame shall be Single rebate profile of section 140 x 90 mm made out of Hard Wood (Red Mirandi) with factory made groove of suitable size so as to accommodate Fire & smoke seal of size 20x4mm.Wooden Shutter 1) Wooden shutter must be of 77mm thickness finished with 6mm Thick Commercial Ply & 1mm Thick Laminate (Any Regular Plain Shade inSuede Finish) on both faces. 2) The composite thickness of the core insulation will be 45mm thick consists of calcium Silicate boards and treated wool Insulation material. 3) The shutter should be provided with heat activated intumescent fire seal strip of size 20mm x 4 mm mounted in the suitable grooves all three sides except bottom provided on Exposed wooden lipping
56	SITC of Designer Metal Ceiling1) Factory made acoustic modular metal false ceiling of powder coated panels. Make shall comprise of perforated and non-perforated metal panels made through CNC laser Cutting, bending & punching. Panel shall be of 0.6mm CRCA sheet of approved powder coating finish. The designer metal ceiling shall be greenguard gold tested/certified (from UL/Intertek). Valid certificate/test report to be submitted along with the technical bid. Metal modular false ceiling shall have One Numberise absorption coefficient (NRC) value 0.60 according to IS:8225-1987, ISO: 354-1985 and ASTM 423-90.2) It is well known that metal is resistant to fire as compared to wood & fabric. However, from fire and safety point of view, to ensure that the used material is not subjected to any kind of surface treatment which provokes fire. The proposed ceiling tiles shall be Class A certified as per ASTM e84 (from UL / Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. Valid certificate/test report to be submitted along with the technical bid. 3) To ensure restriction of hazardous substances; so that the final product does not contaminate the environment and we give a healthy life to our coming generations it is necessary that the modular metal ceiling system shall be RoHS certified (from UL / Intertek). Valid certificate/test report to be submitted along with the technical bid.4) Structure shall be made from heavy duty powder coated CRCA steel sheet (minimum sheet thickness 0.8 to 1.6mm).
57	SITC of Designer Baffle ceiling1) The baffles shall be made up of CRCA Powder Coated sheet. These baffle planks shall be bent through CNC to have dimensions as 80X50mm or as per the design approval or as per EIC approval. The designer baffle ceiling shall be Greenguard Gold Certified from (UL / Intertek). Valid certificate/test report to be submitted along with the technical bid.2) Centre to Centre distance shall be minimum 150mm.3) To ensure restriction of hazardous substances; so that the final product does not contaminate the environment and we give a healthy life to our coming generations it is necessary that the metal ceiling system shall be RoHS certified (from UL / Intertek). Valid certificate/test report to be submitted along with the technical bid.4) It is well known that metal is resistant to fire as compared to wood & fabric. However, from fire and safety point of view, to ensure that the used material is not subjected to any kind of surface treatment which provokes fire. The proposed ceiling tiles shall be class A certified as per ASTM e84 (from UL / Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. Valid certificate/test report to be submitted along with the technical bid.5) Specifications (Finish and component details)5.1) Ceiling Baffle tile: minimum 0.7mm thick CRCA Powder Coated sheet.5.2) Carrier made of 0.60 mm CRCA steel sheet, powder coated to matching baffle colour or black as directed by the Customer. Ceiling to have arrangement to fix, hang and lock the baffles of required sizes and at required intervals. the size of punched carrier would be 35x20x35mm bent channel with holes for suspension and fixing secondary channel.5.3) The baffles top edge will have a flange of 5mm to fix in the carrier profile.5.4) Mother C Channel: minimum 0.8mm thick CRCA steel Sheet with Laser cut profiles.5.5) Suspension: The carriers would be placed at every 1200mm (maximum) and suspended by means of a secondary angle, channel fixed to the carrier at every 900 to 1200 mm and this secondary member in turn would be suspended by 8mm rod fixed to the slab by means of 8mm diameter, dash fastener.5.6) Top Clamp: 1mm thick CRCA steel Sheet for holding the threaded rod.5.7 End Cap: minimum 0.75mm thick CRCA Powder Coated sheet. End cap similar to main ceiling baffle.5.8) Entire structure will be in powder coated CRCA sheet.5.9) Metal Strip where baffle planks will be hanged shall be sleek & sturdy.5.10) Color: As per approval.
58	SITC of Designer Gypsum Ceiling The false ceiling shall consist of approximately 12 mm thick gypsum boards, supported by a structure formed of GI perimeter channels. The boards shall be affixed to the wall using wood screws and metal expansion raw plugs. The gypsum boards are manufactured from an aerated gypsum core with water-repellent additives, firmly bonded to strong paper liners. The surface of the gypsum boards shall be finished with plastic emulsion paint of an approved make and shade. The gypsum boards shall comply to below standards:1.1) Surface Spread of Flame (BS-476 -Part-7): The boards shall be classified as Class 1, ensuring a high level of fire resistance.1.2) Water Absorption Class (EN-520): The boards shall meet the requirements of Class H1, indicating efficient resistance to water absorption.
59	SITC of M.S.Structure for suspending False ceiling for Auditorium Fabricated MS Structure required for false ceili
60	SITC of Wooden Flooring U. Polishing water based polyurethane lacquer. Game line marking to be carried out in required color before applying the finish coat.Teak wood flooring system for Auditorium Stage Flooring SURFACE BOARD: - 1ST Class Teak Wood Sports Flooring - Grade 1” LABO SPORTS Test Certify finished with 21 mm Thickness, 55 to 85mm wide and in random length in tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with air pass groove and treated with special anti-termite and water-resistant lacquer. THE UNDER FRAME: - Resilient SPF Pine Wood sleeper subfloor of 70 mm x 45 mm, treated with anti-termite solution and fixed on the bottom side with 19 mm thick EPDM rubber pads, stapled through the two wings at 350 mm x 350 mm. INSTALLATION: - IPS subfloor treated with a vapour barrier to be placed on the levelled IPS sub-floor before laying the under frame. The runners having air cushion pads to be placed on the vapour barrier in perfect level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. The expansion of 12-15 mm will be left open between the wooden flooring and the surrounding tiled area / walls. FINISHING: - After installation the floor will be machine sanded in uniform level and finished with P.
61	SITC of Granite Stone for Floor Highlighter/steps in required design and pattern, with 12mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) laid and joint with white cement slurry including pointing with white cement slurry admixed with pigment of matching shade as directed by the Engineer-in-Charge.
62	MAIN CURTAINProviding & Fixing of Main Curtain in Fire retardant Hitech Velvet Cloth with lining cloth 50% gatherings Satin Border at bottom of 6\\" and 4” in two pieces (Centre Parting) size 10.50 mt x 4 mt(Rate of Cloth Rs: 1250/LM )
63	MAIN CURTAIN FRILLProviding &. Fixing of Main Curtain Frill in same clothas Main Curtain 50% gatherings & Golden Fringe at Bottom of the Frill size 10.5 mt x 0.9 mt
64	WINGSProviding &. Fixing of wings in Alluminium Box pipe 70mm X 40mm with two intermediate supports. Rollers to slide the wings.Fixing of Cloth on both sides. Rollers at bottom Sixe (4 mt x 1.2 mt)
65	MID & BACK CURTAIN Providing & Fixing of Mid & Back Curtain in Fire Retardant Casement cloth stretched flat of size 9 mt x 4 mt. (Rate of cloth Rs. 575/- Per Mtrs.)
66	CYCLORAMAProviding & Fixing of cyclorama in Bombay Dyeing cloth of size 9 mt x 4 mt. stretched flat. Fixed to counter weight system. (Rate ofcloth Rs. 575/- Per Mtrs.)
67	FRILLSProviding & Fixing of Frills in Drill cloth with 50% gatherings fixed to Grid in 25mm G.I. Pipe suspended by wire rope Size ( 9 mt x 0.9 mt )
68	MIC BARSProviding & Fixing of Mic Cars in G.I. pipe 40mm dia 'B' class length 40\\"
69	LIGHT BARSProviding & Fixing of Light bars in 40 mm G.I. Pipe (Dual Barrel) 'B' Class with Brackets. M.S. Tray for Electric wire. (Size 100mm X 50mm )a) 30 Fts. 3
70	CENTRE PARTING MECHANISM sets, limit switches, electric wire 2.5 sq m.m 7 core as required, for Main Curtain1 One Numbers. 3,25,000 3,25,000.00 Providing & fixing of Centre Parting Mechanism fixed with 1 H.P. 3 Phase Motor Aluminum 'C Track, 3mm Steel wire rope, runners, M.S. Drum,Reduction Pulley Sets. Wooden Panel, M.S. Angle stand 500 x 50mm (Siemens) contactors, Push Button
71	ELECTRIC HOISTING MECHANISM A Providing & Fixing of hoisting Mechanism for with Following detailsa. 2 H.P. 3 Phase motor (Navjyot make)b. Gear Box 40:1 (ELECON)c. 100mm Pulley Set with Bearings on way two way, three way, four wayd. Guide Pulley setse. 6mm steel wire rope. Appox 400ftf. 75mm x 50mm M.S. Stand g. M.S. Drum 9\\" diah. Limit switches with Plate & Rodsi. Electric wire 2.5 sq.mm 8 corej. Panel Board with sicmens/L&T Contactorsk. Pedestal Bearing 2 One Numbers.l. G.I. Pipe 25mma Frills - 3 One Numbersb MID, Back Curtain, Cyclorama - 3 One Numbers c MIC Bars - 2 nosd Light Bars: ( Dual Barrel Pipe & Brake Motor ) - 3 nos
72	PIPE GRIDProviding & Fixing of Pipe Grid to be suspended form ceiling in M.S .Flat of 40mm x 5mm.The grid to be provided G.I. Pipe of 50mm 'B' Class.M.S. 'C' Channel of 75mm x 40mm on three sides. Painting etc complete. Size (10.5 mt x 7 mt)
73	Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
74	Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.
75	Providing and fixing 1.5 mm thick polyvenyl venyl chloride flooring including leveling the base with white cement including pasting with appropriate material cleaning the surface etc. complete. as per drawing. as per SSR. Page No. 217 , sr. no.-1026, Item No. / Ref. No.- 33.39 as per ssr. 2022-2023 pdf.
76	Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015). as per drawing. as per SSR. Page No. 48 , sr. no.-215, Item No. / Ref. No.- 6.12a as per ssr. 2022- 2023 pdf.
77	Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10- 97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro- eflectance of the reflecting panel, to the Engineer. as per drawing. as per SSR. Page No. 47 , sr. no.-212, Item No. / Ref. No.- 6.09 as per ssr. 2022-2023
78	Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens. as per drawing. as per SSR. Page No. 544 , sr. no.-15, as per ssr. 2022-2023 pdf.
79	Providing and Laying of Rumble strips with Plastirib 2K, or equivalent 2 component cold plastic profiled material to give total width of 500 mm and height of 10 mm. Ramp provided to give width of 145 mm, width of ribs to be 55mm laid at centre to centre distance of 35 mm, with reflective glass beads @ 350 gm / One Square Metre. The finished surface to be levelled, uniform and free from streaks and holes, to be applied on the edge lines, including surface cleaning and cost of all materials etc. complete. as per drawing. as per SSR. Page No. 386 , sr. no.-1962, Item No. / Ref. No.- 51.126a as per ssr. 2022-2023 pdf.
80	Electrical BOQ
81	Supplying and erecting 20mm dia. corrugated flexible polypropylene conduit
82	Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
83	Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
84	Supplying and laying HMS PVC conduit FRLS grade 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
85	Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.
86	Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
87	Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW
88	Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
89	Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking /inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
90	Supplying and erecting mains with 4x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/ inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
91	Supplying and erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/ inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
92	Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV
93	Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box.
94	Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
95	Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.
96	Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
97	Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
98	Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected.
99	Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected.
100	Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW
101	Supplying and installing cat-6 LSZH cable suitable for networking as per specification no. WG-COC/NC
102	Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.
103	Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO
104	Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
105	Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
106	Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
107	Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB
108	Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/ MCBDB1
109	Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1
110	Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
111	Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
112	Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB Note:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% inrate of 3 pole MCCB.
113	Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB
114	Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable for four pole incoming 250A, 4 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCBs) for stage craft panel.
115	Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.(for stage craft work)
116	Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(for stands and stage light bar accessories)
117	Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.
118	Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.
119	Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
120	Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
121	Supplying and erecting selector switch suitable for voltmeter/ammeter for 3 phase AC supply 500V, 50Hz,on provided box / panel and duly connecting with necessary PVC wire leads and lugs.
122	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
123	Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
124	Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories.
125	Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.
126	Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982
127	Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA
128	Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty.
129	Supplying and erecting white footlight with 4 modules concealed modular box and LED lights with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and mortar / POP as per required and duly connected.
130	SITC of Stretch Ceiling (Illuminated with LED luminaries) Supply of Translucent Stretch Ceiling System -supplies exclusively premium-gradeof European Standard PVC Thermo-StretchableMembrane, complying with BS1-D0 as per EN 13501-1 and Class A as per ASTM E84-2024fire safety standards. The membrane is precision-cut to the required shape and size, with perimeter edges high-frequency welded with harpoon inserts. Installation is carried out using a durable aluminium profile framing system, ensuring a seamless, secure, and aesthetic ceiling solution Thickness 0.18 mm Weight 250–300 gsm ± 2% Light Transmission Up to 75% (for translucent type) Width Up to 5 meters (seamless); larger areas joined with invisible seams Stretching Method Thermal installation at ~50–60°C using hot air gas blower Fire Rating BS1-D0, as per EN 13501-1, ASTM E84-2024 Class A Explanation: B = Very limited contribution to fire, s1 = Little or No Smoke Production, d0 = No flaming droplets or particles Moisture Resistance 100% Moisture-proof UV Resistance Yes – does not yellow or degrade indoors Environmental ROHS compliant, Phthalate-free, UL Certified - Tri-O-cresyl phosphate < 50mg per kg Certification Manufactured in ISO 9001:2015 certified factory Warranty 10 Years (under standard indoor conditions) Installation of Stretch Ceiling System -Installation of pre-supplied Stretch Ceiling System, including site preparation, profile fixing, membrane stretching, and finishing using specialized tools and skilled labour. The scope includes Fixing of aluminium/PVC perimeter profiles as per approved ceiling layout Heating and stretching of the pre-cut stretch ceiling membrane on-site Alignment, tensioning, and seamless fitting of membrane onto the installed profiles Integration of cut-outs for lighting, sprinklers, air conditioning vents, speakers, etc. Final finishing, cleaning, and handover of installed ceiling area Rate Includes: Skilled labor, installation tools, on-site execution, and necessary accessories for completing the installation of the stretch ceiling. Supply of Sanan 220V LED Module 4000K Neutral White Delivering ambient elegance Stretch Ceilings Built for performance and durability, this advanced lighting module is specifically engineered for stretch ceiling applications: LED Type: Sanan SMD2835 CRI: ?80 – Delivers natural, true-to-life color accuracy Mounting: High-performance aluminium rigid PCB – Ensures excellent thermal management and long lifespan Configuration: – Each block features 4 high-quality LEDs – Optimized light spacing for shadow-free illumination – Viewing Angle: PMMA lens Ultra-wide 160° beam spread Dimmable: No Power Consumption: – Only 6W per sq.ft – Energy-efficient yet high-lumen output Lighting Quality: – Uniform light diffusion across the stretch ceiling – Suitable for both translucent and printed membrane types Warranty: 5 Years or 30,000 Hours (whichever comes first) Installation of Lighting System Installation of pre-supplied LED lighting fixtures, associated drivers, and control systems, including all necessary mounting, wiring, terminations, and system integration by qualified technicians. , The scope includes: Installation of LEDs as per lighting layout Mounting and secure placement of LED drivers and control gear in accessible locations Electrical connections between LEDs, drivers, and controllers using appropriate cabling Testing of each circuit and commissioning of the full lighting setup , Rate Includes: Skilled labor, tools, basic fasteners, and all on-site installation efforts. Supply of Powder coated Boxing - 120MM Aluminium framing with translucent/printed stretch ceiling membranes, this system is perfect for custom lighting enclosures and dynamic lighting designs. It features a powder-coated finish with a 120mm body height profile, reinforced by a 1mm aluminium back sheet and a 50×25×2mm hollow tube. With flexible installation options and sealed joints, it ensures a dust- and insect-free environment
131	SITC of Round LED Ceiling Light Supply, installation, testing and commissioning of recessed adjustable COB LED down light, 40 W system wattage, 4000 K CCT, 24° beam angle, CRI ≥80, die-cast aluminium housing with high efficiency reflector optics, complete with DALI dimmable electronic driver suitable for operation on 230 V AC supply, including mounting accessories and connections. Typical Technical Specification General Type: Recessed adjustable COB LED downlight (Gimbal type) Mounting: False ceiling recessed Application: Retail, auditorium, gallery, office, hospitality lightingElectricalSystem Wattage: ≈40–41 WInput Voltage: 220–240 V AC, 50 HzDriver: DALI dimmable constant current driverPower Factor: ≥0.95Surge Protection: ≈2.5 kVOpticalBeam Angle: 24°CCT: 4000 K (Neutral White)CRI: ≥80Lumen Output: ≈4200 lumens (approx.)MechanicalHousing: Pressure die-cast aluminiumFinish: White powder coated Optics: High efficiency reflector with clear glassAdjustable Tilt: ≈30° gimbal adjustmentProtection & LifeIP Rating: IP20 (indoor)LED Life: ≥50,000 hoursThe luminaire uses high-power LEDs with aluminium heat-sink construction for thermal management and long service life.
132	SITC of MASTER LED tube integrates Supply, installation, testing and commissioning of linear suspended LED luminaire, 30 W system wattage, 4000 K CCT, CRI ≥80, extruded aluminium housing with satin PMMA diffuser, complete with DALI dimmable electronic driver suitable for operation on 230 V AC supply, including suspension accessories, wiring and mounting arrangements.Typical Technical Specification GeneralType: Linear suspended / recessed LED luminaire Application: Office, conference room, institutional buildings Electrical System Wattage: ≈30 WInput Voltage: 220–240 V AC, 50 Hz Driver: DALI dimmable electronic LED driver Power Factor: ≥0.95OpticalColour Temperature: 4000 K (Neutral White)CRI: ≥80Luminous Output: ≈3000–3300 lumens Diffuser: Satin PMMA / HET diffuser for uniform light Mechanical Housing: Extruded aluminium body Finish: Black powder-coated Mounting: Suspended / recessed Length: Approx. 1200 mm (4 ft) Protection & Life IP Rating: IP20 (indoor) LED Life: ≥50,000 hours Surge Protection: ≈2 kV
133	SITC of Cove light It will be a continuous rail of LED light, high brightness, neutral, or warm white with wall washing applications. Its slim profile and simple daisy-chain system allows high design flexibility to form long.1) Light source: LED 2) Lumen output: 500 lm/m 3) Light color: 6500K 4) Power consumption: 3W / m to 5W / m 5) Operating Voltage Range (V) 100 – 300 6) Operating Frequency (Hz) 50 ± 3% 7) Colour: White 8) Lifetime: 15000 burning hrs. (At L70)
134	SITC of Dimming Lighting Dali Master Controller Supply, installation, testing and commissioning of DALI Master Controller complete with integrated DALI bus power supply, capable of controlling minimum 3 independent DALI loops with up to 64 DALI devices per loop (192 drivers total), DIN rail mounted, suitable for 100-277 VAC supply, with Ethernet and RS-485 communication interface, including addressing, programming, commissioning, interconnections, accessories and integration with lighting control system as required, complete in all respects. 1. General Type: DALI-2 Driver Controller / DALI Master Controller Model: DDBC320 - DALI Protocol: DALI-2 (IEC 62386 compliant) Application: Digital lighting control and monitoring system Mounting: DIN-rail mounted for electrical distribution board Construction: Polycarbonate enclosure2. DALI Network Features Number of DALI Channels: 3 independent DALI lines Maximum DALI Devices: 64 devices per DALI line (up to 192 drivers total)Integrated DALI Bus Power Supply Guaranteed Bus Current: 220 mA Maximum Bus Current: 250 mA Supports DALI-1 and DALI-2 control gear and input devices Supports sensors, push buttons, occupancy sensors and light sensors on DALI bus3. Electrical Specifications Supply Voltage: 100 – 277 VAC, Single phase Supply Current: 0.5 A Auxiliary Output: 12 VDC, 300 mAIEC Over-voltage Category: IIIOutput Ratings (Per Channel):Electronic Driver Load:16 A at 277 V AC (UL)20 A at 240 V AC (CE)Pilot Duty Rating:6 A @ 120 V3 A @ 240 VInrush Current: 500 A Maximum Group Load: 60 A total4. Communication & Interfaces Ethernet Port: RJ-45 for integration with building networkRS-485 Port: For DyNet / DMX communication DALI Bus Terminals: DA+ / DA- for each DALI line UL924 Input for emergency lighting integration On-board DALI line test and override switches for commissioning and maintenance 5. Control & Monitoring Features Automatic device enumeration and addressing Driver runtime monitoring and status reporting Lamp failure detection and diagnostics Automatic network self-repair when drivers are replaced Onboard test function for DALI lines Ability to switch all drivers ON/OFF for testing without software 6. Physical Specifications Dimensions: 216 × 95 × 64 mm (approx.) Weight: 0.6 kg Operating Temperature: -25°C to +50°COperating Humidity: ≤90% non-condensing Installation: Panel mounted on standard DIN rail7. Protection & Safety Electronic self-resettable fuse for DALI bus SELV/Class-2 rated communication connections Certifications: CE, FCC, cULus, UKCA8. Scope of Work The scope shall include: Supply of DALI Master Controller Installation in lighting control panelWiring with DALI network and power supply Addressing and commissioning of DALI drivers Integration with lighting control system Testing and handing over complete operational system
135	SITC of Touch Pad Supply, installation, testing and commissioning of wall mounted programmable touch pad/scene control panel for operation of lighting circuits connected to the DALI-2 lighting control system. The touch pad shall allow manual control of lighting scenes, dimming levels and switching functions through the DALI master controller.
136	Supplying and erecting mains with 4x25sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW in HMS PVC conduit FRLS grade 32mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
137	Supply, fixing XLR 2 core cable in pvc.rigid ,conduit approx.
138	Supply, fxing XLR connect socket male or female with m.s.box. 1 One Number on each box.
139	SITC of 8-Way DMX Splitter Supply, installation, testing and commissioning of 8-way DMX512 signal splitter / distributor for stage or architectural lighting control system. The splitter shall receive DMX512 control signal from lighting controller and distribute the signal into eight optically isolated DMX outputs while maintaining signal integrity and protection. Electrical & Control Protocol: DMX512 / DMX512-A with RDM support Number of DMX Channels: 512 channels per universe Input: 1 × DMX512 input (3-pin or 5-pin XLR) Through Port: 1 × DMX thru output for daisy chaining Outputs: 8 × DMX optically isolated outputs Isolation Voltage: minimum 1000 V optical isolation between ports Signal Type: RS-485 differential signal Amplification: Built-in DMX signal booster and distributor Data Indicators: LED indicators for power and DMX signal presence Optical isolation protects fixtures and controllers by electrically isolating the outputs while distributing DMX signals. Power Supply Input Voltage: 100–240 V AC, 50/60 Hz Power Consumption: 10–15 W approx. Power Connector: IEC / power CON type Protection: Short-circuit and overload protection Connectivity DMX Connectors:1 × DMX input1 × DMX thru output8 × DMX outputs Connector Type: 3-pin or 5-pin XLR Maximum Devices: Up to 32 devices per output line Mechanical Construction Enclosure: Metal / Aluminium rack-mount housing Mounting: 19-inch rack mount (1U) or truss mounting Finish: Powder-coated black Protection Class: IP20 indoor use Environmental Conditions Operating Temperature: –10°C to +45°C (approx.) Storage Temperature: –20°C to +70°C Relative Humidity: 5% – 95% non-condensing Compliance Standards: DMX512 / ANSI E1.11RDM ANSI E1.20CE / RoHS compliant
140	Supply, fixing stage light operating mini pearl consol Digital Lighting Console with 1024 DMX channels, 1024 Channels, 10 Programmable Executors, Master Fader, Keypad entry, LCD Display, Encoder Wheels, LTP slope Channels for each fixture 40 primary + 40 fine tune Switchable Page Scenes/Playbacks, 10 Scenes to run simultaneously, 600 Scene step, Shapes of Dimmer, Pan/Tilt, RGB, CMY, Colour, Gobo, Iris and Focus, Master slider- Global, playback, fixture USB Memory - FAT32 supported.
141	SITC of Electronic Dimming System (DMX Based) – 18 Channels Supply, installation, testing and commissioning of electronic dimming system based on DMX-512 protocol consisting of 18 channels (6 channels × 3 modules), each channel rated for 2.5 kW load, suitable for stage/architectural lighting control applications. The dimmer system shall operate on 230/415 V AC, 50 Hz supply and shall be compatible with standard DMX lighting controllers. Each channel shall be provided with two numbers of 16 A, 3-pin sockets, complete with individual circuit protection, electronic dimming control, and thermal management system. The dimmer pack shall incorporate over-voltage protection, surge protection and TDS (Thermal / Temperature Detection System) for protection against overheating and abnormal operating conditions. The unit shall include DMX512 input and through ports, digital display for addressing, status indicators, internal cooling fan, MCB protection, proper earthing arrangement and heavy-duty metal enclosure suitable for rack/console mounting. The system shall be complete with all accessories, interconnections, wiring, testing and commissioning as required.
142	Supply, fixing 4 One Numbers. 6 sq.mm + 1 One Number 4 sq.mm multi strand copper, ISI FR wires in PVC conduit approx.
143	Supply, fixing stand adjustable with cross bar (Shaft)at top (STD 4).
144	Stage light fittings with suspension hook, lock chain barn door. M.R. i. MAKE LIGHT FITTINGS a. 1000 watt Fresnel spot light fitting with lamp
145	Stage light fittings with suspension hook, lock chain barn door. M.R. i. MAKE LIGHT FITTINGS b. 1000 watt floodlight with lamp
146	Stage light fittings with suspension hook, lock chain barn door. M.R. i. MAKE LIGHT FITTINGS c. 1000 w. PARCAN 64 (If available)
147	Stage light fittings with suspension hook, lock chain barn door. M.R. i. MAKE LIGHT FITTINGS d. LED blinder 200 Watt
148	Stage light fittings with suspension hook, lock chain barn door. M.R. i. MAKE LIGHT FITTINGS e. LED PAR 54 x 3 RGBW DMX
149	SITC of patch panel 36 nos. dimming sockets and 36 nos. direct anchor sockets with SPMCB for each socket, patching leads with 3 core 2.5 flex. F.R. cable and 16A.3 pin plug. (Sockets anchor or back elite)
150	Providing and fixing IN & EXIT LED Display Light Signages with SMPS in auditorium of size 12\\"(L) x 6\\"(H) as per instruction engineer in charge
151	Supply, Installation, Testing and Commissioning (SITC) of IP55 Rated Professional Line Array Speaker System for Indoor and Outdoor Installations TECHNICAL SPECIFICATION: Design Configuration: Full-range articulated line array design with minimum eight (8) 4.5\\" full-range cone transducers or better per cabinet.Environmental Rating: IP55 rated for both indoor and outdoor installations, providing protection against dust ingress and water jets from any direction.Driver Configuration: Minimum eight (8) full-range cone transducers of 4.5\\" (114mm) diameter or better, arranged in articulated array configuration for optimal coverage and throw.Frequency Response: -10dB bandwidth of 52 Hz to 15 kHz or better, ensuring full-range reproduction with extended low-frequency response and clear high-frequency performance.Power Handling:- Continuous Power (AES): 300W @ 8 Ohms or better- Peak Power (AES): 1200W @ 8 Ohms or betterImpedance: 8 Ohms nominal or betterDispersion Pattern: Nominal dispersion of 120° Horizontal x 100° Vertical or better, providing wide and controlled coverage.Sensitivity: 91 dB SPL (1W/1m) or betterMaximum SPL: Peak SPL of 121 dB or better at 1 meterEnclosure Construction: Heavy-duty powder-coated steel grille with weather-resistant cabinet construction. Durable powder-coated finish suitable for outdoor installations.Mounting Hardware: Complete with appropriate rigging hardware, flying brackets, and suspension system for line array configuration. All hardware to be corrosion-resistant and suitable for permanent installation.Connectivity: Professional-grade input connectors (NL4 Speakon or equivalent) with parallel throughput capability for daisy-chaining multiple cabinets.Cabling: Supply and installation of appropriate gauge speaker cables with weatherproof connectors, properly terminated and labeled.Scope of Work includes:- Unloading and safe storage at site- Installation of mounting brackets and rigging hardware- Precise alignment and angling of array elements- Professional cable management and termination- System configuration and optimization- Complete testing and commissioning- Training of operation staff- As-built drawings and O&M manuals Warranty: Minimum 2 years comprehensive warranty from the date of final commissioning.Compliance: All equipment shall comply with relevant IS/IEC standards and local electrical safety regulations.Approved Makes: EAW (Eastern Acoustic Works) / Martin Audio / Bose Professional
152	SITC of OEM U-Bracket for IP55 Rated Line Array Speaker - Genuine OEM U-Bracket specifically designed for above specified Line Array Speaker (Minimum 8 x 4.5\\" full-range drivers) Heavy-duty construction suitable for indoor/outdoor installation Material: Powder coated mild steel or extruded aluminum (corrosion resistant) Load bearing capacity matching speaker weight and environmental loads (wind, vibration) Mounting: Adjustable pan/tilt mechanism with safety locking pins- Finish: Powder coated black or RAL 9005 (weatherproof) Hardware: Stainless steel bolts, nuts, washers (AISI 304 grade) IP rating: Minimum IP54 (compatible with speaker IP55) Complete with installation, alignment, safety wire/cable attachment, testing & commissioning Submit manufacturer's load rating certificate. Approved Make -EAW,Martin Audio,Bose
153	Supply, Installation, Testing & Commissioning (SITC)of IP55 Full-Range Array Loudspeaker indoor/outdoor, ≥4×4.5\\" cone drivers articulated array, Freq 73Hz-15kHz (-10dB), 150W cont/600W peak @8Ω, 120°H×60°V dispersion, ≥90dB sensitivity, ≥118dB max SPL peak, powder-coated steel grille, complete as specified.Key Technical Specs:Drivers: ≥4×4.5\\" full-range cones Power: 150W AES cont / 600W peak @8Ω Performance: 73Hz-15kHz (-10dB), ≥90dB 1W/1m, ≥118dB SPL peak Coverage: 120°H × 60°V (-6dB) Construction: IP55 enclosure, steel grille, UV-resistant cabinet Connectors: 2×speakON NL4 Mounting: U-bracket ready (OEM pattern)Approved make - EAW,Martin Audio,Bose
154	Supply, Installation, Testing & Commissioning (SITC) of OEM Surface-Mount Pan & Tilt Bracket for IP55 Array Loudspeaker (4×4.5\\"), 304 stainless steel, 360° pan/±60° tilt, 40kg load (8:1 safety), powder-coated, surface wall/ceiling mount, complete as specified. Key Technical Specs: Material: 304SS (2.5mm thick), corrosion-resistant coating Adjustment: 360°H pan, ±60°V tilt (preset lock positions) Load: 40kg working / 320kg ultimate Mounting: 4×M8 surface anchors + OEM speaker pattern Accessories: Bolts×6, safety tether, install template Finish: Black/white powder coat (RAL 9005/9010) Approved make - EAW, Martin Audio, Bose
155	SITC of 2-way ceiling mounted music and PA loudspeaker. The loudspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 75Hz to 20kHz; Power handling of 100Watt peak; Nominal dispersion of 155° Conical; Sensitivity of 83 dB SPL and Max SPL of 103 dB SPL peak; Nominal impedance of 8 Ohms with an Integral multi-tap Transformer with selectable tap settings of 6/12/25W@100V or better. The loudspeaker system shall be comprised of a powder-coated magnetic steel grill; 3.25-inch woofer enclosed in engineered-plastics with integrated steel back can and an In-built waveguide designed to provide uniform area coverage across the loudspeakers frequency range. UL-1480A rated and UL2043 rated for plenum-space installation. Shall be packed in pairs. Approved make -Martin Audio, Bose.
156	SITC of 2-way ceiling mounted music loudspeaker. The loudspeaker shall meet the following criteria: Frequency range (-10dB) of 65Hz to 20kHz; Power handling of 200Watt peak; One Numberminal dispersion of 155° Conical; Sensitivity of 86 dB SPL and Max SPL of 109 dB SPL peak; One Numberminal impedance of 8 Ohms with an Integral multi-tap Transformer with selectable tap settings of 6/12/25/50W@100V or better. The loudspeaker system shall be comprised of a powder-coated magnetic steel grill; 5.25-inch woofer enclosed in engineered-plastics with integrated steel backcan and an In-built waveguide designed to provide uniform area coverage across the loudspeakers frequency range. UL-1480A rated and UL2043 rated for plenum-space installation. Shall be packed in pairs Approved make -TANNOY,MARTIN AUDIO,BOSE
157	Supply, Installation, Testing & Commissioning of 18\\" Single Driver Subwoofer with Baltic birch plywood enclosure (15mm/18mm multi-ply), Freq Range 29Hz-300Hz (-10dB), ground stack sensitivity ≥98dB (1W/1m), max calculated SPL peak ≥133dB, nominal impedance 4Ω, continuous power handling ≥750W AES, integrated cardioid array rigging hardware + ground stack positioning system, complete as specified.DETAILED TECHNICAL SPECIFICATIONS Acoustic Performance: Frequency Range: 29 Hz - 300 Hz (-10 dB measured) Sensitivity: ≥98 dB (1W/1m, ground stack position, half-space) Maximum SPL: ≥133 dB peak (calculated, 4Ω direct) Nominal Impedance: 4Ω (±15%) Power Handling: ≥750W continuous AES / ≥3000W peak (10ms) Driver Configuration: LF Driver: 1 × 18\\" high-excursion woofer, 4\\" (100mm) voice coil Voice Coil: Outside-wound copper/aluminum, Kapton former Magnet: Ferrite or neodymium (FEA optimized) Suspension: Double spider, progressive surround Enclosure Design: Construction: Baltic birch plywood (15mm/18mm), internally braced Finish: extured polyurethane black (tour-grade, UV/water resistant) Venting: Ported bass-reflex, flared ports (low turbulence) Grille: Perforated steel, powder-coated, acoustically transparent foam backing Dimensions: ≤1200mm(H) × 550mm(W) × 700mm(D) Weight: ≤55-65 kg (enclosure + driver) Rigging System: Cardioid Array: Integrated rigging pins (quick-release), 0°/6°/12° splay angles Ground Stack: Stack-locators + interlocking rubber feet (stable pyramid) Load Rating: 10:1 safety factor (certified) Attachment Points: 12×M10 forged eyebolts (load-rated)Electrical & Connectors: Input Connectors: 2×Neutrik NL4 speakON (parallel wired ±1/±2) Wiring: 13 AWG internal cabling, star-quad configuration Polarity: Pin1+ = positive, Pin1- = negative Mechanical Specifications: Handles: 2× ergonomic side handles (reinforced injection molded) Feet: 4 x stack feet + 4 x interlock recesses Castors: Optional heavy-duty (reinforced 100mm, lockable) Cooling: Passive convection (no fans) Environmental: Operating Temperature: -10°C to +50°C Humidity: 90% RH non-condensing IP Rating: IP24 minimum (splash/dust resistant) Safety & Compliance: Standards: IEC 60098-5 (measurement), RoHS, CE Suspension: EN 1993-1-1 (Eurocode 3) compliant rigging Approved make - L Acoustic , D&B Audio Technik, Bose
158	Supply, Installation, Testing & Commissioning of OEM Ground Stack / Rigging Bracket for 18\\" Subwoofer, 304 stainless steel construction, 100kg load capacity (10:1 safety factor), cardioid array pins + M20 pole mount adapter, powder-coated black finish, complete as specified. Key Technical Specs: Material: 304SS (4mm structural), corrosion-resistant Load Rating: 100kg working / 1000kg ultimate Rigging: Cardioid array pins (0°/6°/12° splay), M20 pole socket Mounting: 8×M10 forged eyebolts, ground stack locators Adjustment: Stack alignment guides, interlock system Finish: Textured polyurethane (tour-grade) Approved Makes: L-Acoustics, d&b audio technika, Bose Professional
159	SITC of Two-way Small Format high SPL IP55 rated (as per IEC 60529) all weather surface mount loudspeaker. The loudspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 90 Hz - 18 kHz or better; One Number minal Dispersion : 100°H x 100°V; Power handling of 400W peak or more; Sensitivity : 90 dB and the Max SPL : 118dB Peak or better; One Number minal impedance of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 10/20/40/80W@70V & 100V. The loudspeaker system shall be comprised of a Powder-coated finish stainless steel grille with Two-part spray polyurea coating Enclosure; Single 5.25-inch woofer; Single 2-inch voice coil high-frequency compression driver; U bracket shall be included. Approved make - Martin Audio,Eaw,Bose
160	Supply of powered two-way portable full range sound reinforcement loudspeaker . The loudspeaker shall meet the following criteria: built-in amplifier with a system power of 1000W or better; Frequency Range (-10 dB) of 43 Hz - 20 kHz; Horizontal dispersion pattern of 100º and Vertical dispersion shall be 40°; The loudspeaker shall have a Max SPL : 132 dB Peak. The loudspeaker system shall be comprised of a powder-coated perforated steel grille; Single 12-inch Low Frequency driver and 8 x 2.25” mid-high drivers with a 2 channel input mixer; One channel for Mic/Line input and the second channel for line level input. The loudspeaker shall offer selectable EQ for operation with or without subwoofer and have a built-in protection for signal overload. Approved make - Martin Audio,Qsc,Bose
161	SITC of Full range IP55 rated indoor/outdoor surface mounted music loudspeaker. The loudspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 70Hz to 19kHz; Power handling of 160 Watt peak; One Number minal dispersion of 100°(H) × 100°(V); Sensitivity of 87 dB SPL and Max SPL of 109 dB SPL peak; One Number minal impedance of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 5/10/20/40W@70V & 100V. The loudspeaker system shall be comprised of a 4.5-inch woofer; enclosed in engineered-plastics and a powder-coated tamper-resistant steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applicatons. Shall be packed in pairs. Approved make - MARTIN AUDIO,EAW,BOSE
162	E- podium Providing and fixing of All in one e-Podium Include All in ONE DSP (Digital Signal Processor ) with Power Amplifier + Interactive Writing Tablet + 1 Wireless Handhold + 1 Lapel Microphone + 1 Gooseneck Microphone Shall have Body : Metallic Top : Metallic Top Sliding Mechanism : Yes Provision for Monitor : Yes (up to 22 inches) Electronic Monitor Lift : Yes Document Camera Tray : Yes (Sliding Type) Screen Size : 21.5” wide LED Resolution : 1920 x 1080 PC Connection : USB Port Luminosity : 250 cd/m2Input : HDMI Number of Colours : 16.7MResponse time : 5ms Contrast ratio : 1000/1 Operating System : Windows, Linux, Mac. Frequency Range : 30Hz -15000 Hz Automatic Echo Cancellation : Yes Automatic Gain Control : Yes Dynamic Noise Reduction : Yes Full Duplex : Yes Line Input : 1x Line Input Line Output : 1 x Line Output USB Audio Port : 1 x USB Port (Multi Channel Digital Signal) (Central Controller) Ethernet : 1x RJ-45 RS-232 Port : Total 1 dedicated RS-232 Port Relay Switch Port : Screen Up/Screen Down ( 2 Nos)
163	SITC of Class D configurable amplifier with a digital signal processing architecture running at 48 kHz / 24 bit .The amplifier shall deliver 4 x 300 W each Load-independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V) loads without bridging ; Frequency Response : 20Hz - 20kHz for LZ mode ; THD <0.04% at rated output complete with standard accessories as required.The amplifier shall have Dedicated input for 600-ohm telephone or mic paging, independent 600-ohm music-on-hold and line-level aux outputs, and a NO/NC mute connection. Phoenix Input and output terminals, shall support remote source selection and Volume controllers (wired) for individual channels. Built in DSP for Matrix routing, Speaker EQs, PEQ ,limiter etc. Approved Make -Lab Gruppen, Ashly Audio,Bose
164	SITC of Integrated Low Impedance Class D Amplifier - Output power: 2 x 50W @ 4Ω / 2 x 25W @ 8Ω Frequency response: 40 Hz - 18 kHz (+0/-3 dB @ 1W, 1 kHz reference) Class D amplification with high efficiency (>85%) Inputs: 2x line (RCA), 1x mic/line (XLR/TRS combo), 1x page mic (Euroblock), 1x aux (3.5mm) Input sensitivity: 0 dBV line / -40 dBV mic THD+N: ≤0.3% @ rated power SNR: >95 dB (A-weighted) Controls: Master volume, channel trims (±20dB), treble/bass EQ (±6dB @ 7kHz/100Hz) Outputs: 2x barrier strip (speaker), auxiliary RCA Protections: Clip limiting, thermal, short circuit, DC Rack mountable (1U), 100-240V AC, fan cooled Complete SITC: Wiring to speakers/projector, gain matching, noise floor testing, integration with AV control. Approved Make - Lab Gruppen, Ashly Audio, Bose
165	SITC of conferencing processor shall have 4 mic/line inputs and 4 balanced output channels for analog audio signals, each independently controllable . The DSP shall contain 8 channels of acoustic echo cancellation (AEC), with multiple references, routable to analog and/or Dante® inputs. The DSP shall have 16 input and 16 output Dante digital audio channels, and an Ethernet connection for control and programming, integrated VoIP connection for 1 line, PTSN, USB audio and 4 digital channels on an RJ-45 jack. The audio DSP shall be configurable signal processing, including : signal routing and mixing,equalization, filtering, dynamics, delay, conference room router, conference room combining, as well as control, monitoring, and diagnostic tools. The audio DSP shall control and proxy all expansion devices and other Dante endpoints. .It shall have following specs : Frequency Response-18 Hz to 20 kHz (+0.8 dB/-0.2 dB ref 1 kHz) THD+N < 0.003% @ +4 dBu (A-weighted/20 Hz to 18 kHz)Channel Separation (Crosstalk) < -105 dB at +4 dBu 1 kHz input signal Dynamic Range > 115 dB, A-weighted 20 Hz – 20 kHz, analog input to analog output Approved make -Lab Gruppen,Ashly Audio,Bose
166	SITC of class D amplifier with 2 x 600 W Load-independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V) loads without bridging .Amplifier shall have frequency response of 20 Hz to 20 kHz (+/- 1 dB) for LZ mode,with THD+N at rated power less than 0.04%.The amplifier shall meet or exceed the following performance specifications: channel separation (crosstalk) greater than 80 dB below rated power at 1 kHz. . The amplifier shall have 2 line-level inputs with selectable input sensitivity settings ( -10 dBV, 4 dBu and 14 dBu) for balanced line-level inputs (6-pin Euroblock connector) and possiblity of 4 or more no .of digital Audio channels . The amplifier shall offer a master mute connection for use with external dry contacts, normally open or normally closed, to mute all outputs of the amplifier. Approved make -Lab Gruppen,Ashly Audio,Bose
167	SITC of conferencing digital audio DSP with 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600 MHz processor or better with following features and specifications are required. The DSP shall have 12 balanced inputs and 8 balanced output channels for microphone or line-level analog audio signals, each independently controllable . The DSP shall contain 12 channels of acoustic echo cancellation (AEC), with multiple references, routable to analog and/or Dante® inputs. The DSP shall have Dante digital audio networking up to 64 x64 channels, an Ethernet connection for control and programming on an RJ-45 jack and VoIP connection for 2 lines, GPIO – 5x5 expandable general-purpose contro, PSTN and USB audio and 8 digital channels on an RJ-45 jack.It shall have IT web configuration page, USB Port – Micro-B USB for PC soft codecs with stereo input and output, ultra-low latency digital audio, Serial Port – 3-wire RS-232C (DTE) serial interface connection.It shall Supports remote zone controllers , PSTN (RJ-11) – Supports worldwide analog telephone connection, Dynamic Range > 115 dB, A-weighted 20 Hz – 20 kHz; THD : < 0.002 % or better ,Maximum Input Level +24 dBu; Phantom Power +48 VDC, 10 mA, selectable per input. The audio DSP shall include configurable signal processing, signal routing and mixing,equalization, filtering,dynamics, delay, conference room router, conference room combining, as well as control,monitoring, and diagnostic tools. The audio DSP shall control and proxy all expansion devices and other Dante endpoints. Approved make -Biamp, Symetrix, Bose
168	Supply, Installation, Testing & Commissioning (SITC) of Class-D Dual Zone Amplifier, 2×160W RMS @ 70/100V (high-Z), 20Hz-20kHz (±3dB), THD<0.05%, SNR>90dB, Energy Star certified, with independent zone controls (vol/bass/treble/mute), DSP (HPF 80Hz, limiter), remote interfaces (GPI/RS232), protection circuits (DC/short/thermal), 1U rack-mount, 100-240VAC, complete as per detailed specs.Key Technical Specs: Power: 2×160W @70V/100V; alt: 120W@4Ω Inputs: XLR/TRS×2, Euroblock, aux per zone Outputs: Phoenix terminals (+/-/COM), tamper-proof Controls: Per-zone gain/EQ/mute, DIP impedance select Protections: DC/short/thermal/over-current Physical: 1U (483×44×350mm), 4-5kg, fanless/convection Compliance: IEC60268-3, CE, RoHS, Energy Star Approved make - Lab Gruppen, Ashly Audio,Bose
169	Supply, Installation, Testing & Commissioning (SITC) of 4-Channel Dante Digital Amplifier, max output 4×1200W @4-8Ω / 2×3000W bridged @4Ω / 70V/100V capable, Freq 20Hz-20kHz, SNR>110dB(A), THD+N<0.1%, 24-bit/44.1-192kHz Dante (4ch in), PEQ/bandpass/speaker EQ/limiter/delay DSP, max input 20dBu, Euroblock/8-pin analog outputs, metering LEDs + attenuation controls, software/hardware control, complete as specified.Key Technical Specifications:Power Output: Low-Z: 4×1200W @4Ω / 4×600W @8Ω Bridged: 2×3000W @4Ω High-Z: 70V/100V selectable per channel Total Burst: 4800W (Rational Power Management) Audio Performance: Frequency Response: 20Hz-20kHz (±0.5dB) SNR: >110dB (A-weighted, 20Hz-20kHz) THD+N: <0.1% (20Hz-20kHz, 1dB below clip) Crosstalk: >80dB (1kHz) Max Input Level: +20dBu Digital Audio: Dante Channels: 4 in / 4 out (dual redundant) Sample Rate: 24-bit, 44.1/48/96/192kHz Latency: <1ms (Dante network) AES67 Compatible DSP Processing (Per Channel): PEQ: 8-band parametric (±15dB, Q 0.5-10) Bandpass: Butterworth/Linkwitz-Riley (24/48dB/oct) Speaker EQ: Factory presets + FIR filters Limiter: Peak/RMS (brickwall) Delay: 0-1000ms (0.021mm steps) Metering: Multi-channel LED + software GUI Connectivity: Inputs: 4×Dante + 4×analog Euroblock (balanced) Outputs: 8×Phoenix Euroblock (2 per channel) Control: Ethernet (Lake Controller/Dante Controller), GPI/O, USB Physical: Form Factor: 2U 19\\" rack-mount Cooling: Front-to-rear fans (temp controlled) Power: 100-240VAC, PFC (>0.95), <1W standby Weight: 12-15kg Compliance: CE, UL, RoHS, Energy Star Approved make -Lab Gruppen , Ashly Audio, Bose
170	Supply, install, test, and commission analog volume control for audio line level adjustment in public address or background music system. Unit shall be wall-mounted gang box type with rotary knob, suitable for 70V/100V line systems or low-impedance (8-16 ohm) speakers.
171	Supply of Integrated Digital Sound Processor with following functionalities and specifications; Signal Processor shall be CPU-32-bit fixed/floating-point DSP + ARM, 456 MHz.The DSP shall have 8 Mic/Line inputs & 8 analog outputs, 8 Additonal digital Outputs; 24 Bit A-D and D-A Convertors; Sampling Rate : 48 kHz; THD : < 0.002 % ; Channel Separation (Crosstalk) : < 105 dB ; Frequency Response 20 Hz - 20 kHz ; Dynamic Range : > 115 dB; 5 Control Inputs and Outputs; RS-232 and Ethernet Port for third party Control and Monitoring; inbuilt DSP features like automatic mic mixing, multiband graphic and parametric EQs, signal generators, routers, mixers, AGCs, duckers,gates, compressors, source selectors, and delays. etc. Shall Support at least 15 remote Zone controllers.Approved make - Bose,extron,crestron
172	SITC of Full HD Laser Projector, OEM Wireless WiFi Dongle & Mounting Bracket. Projector:- Resolution: Full HD 1920x1080 (16:9 native)- Brightness: 5000 ANSI lumens (color/white)- Laser light source: Up to 20,000 hours virtually maintenance-free operation (no lamps)- Design: Ultra short-throw (throw ratio 0.25-0.6:1 typical)- Max image size: 130\\" diagonal (16:9)- Contrast ratio: Minimum 2,500,000:1 dynamic- Connectivity: HDMI 2.0 (x2), HDBaseT, USB, RJ45, RS232- Lens: Motorized focus/zoom/shift, edge blending/keystone correction- Noise level: <35 dB (eco mode)Wireless WiFi Dongle: OEM wireless module for screen mirroring (Miracast/AirPlay), 5GHz WiFi, plug-and-playMounting Bracket: OEM heavy-duty ceiling/wall mount, adjustable pan/tilt/roll (±15°), load capacity >25kg, powder-coated steel/aluminum- Complete SITC: Supply, wall / ceiling mounting, cable management (HDMI/CAT6 up to 100m), signal testing, image calibration, user training- Warranty: 3 years comprehensive (laser source 20,000 hrs) Submit OEM datasheets, calibration report. Approved Make -Sony, Epson, Panasonic
173	SITC of Motorized Projection Screen 120\\" Diagonal (16:9) Diagonal size: 120\\" (106\\" H x 188\\" W approx., 16:9 aspect ratio) Screen surface: Matte white (gain 1.0-1.3, viewing angle 160°+), fire retardant, M1/B1 rated Case: Extruded aluminum, white powder coated, ceiling/wall mount Motor: Silent synchronous, 220V AC 50Hz, IR/RF remote + wall switch control Drop/Rise: 10cm top drop standard, low voltage controller Tensioning: Tab-tensioned for flatness (<1% distortion) Speed: 25-30cm/sec, anti-jam safety sensor Complete SITC: Supply, installation on MS powder coated frame if required, electrical connections, testing with projector alignment. Approved Make - Da-Lite,Milan, Liberty
174	Supply, Installation, Testing & Commissioning (SITC) of 4K HDMI Wall Plate Extender Set over CAT6/UTP, 70m max distance, 10.2Gbps bandwidth, HDMI 2.0 compliant, supports 4K@60Hz 4:4:4 (with EDID management), HDCP 2.2, audio de-embedding (stereo/downmix), RS232 bidirectional control, PoE powered TX (optional), wall-mount TX plate (US/EU gang), RX via RJ45 termination, complete as specified.Key Technical Specs: Video: HDMI 2.0, 10.2Gbps, 4K60 4:4:4, HDR10, 3D, CEC Audio: LPCM 7.1, Dolby TrueHD, DTS-HD MA pass-through + analog stereo out Distance: 70m @4K30 / 100m @1080p over CAT6a Control: RS232 (115200 baud), IR pass-through, bi-directional RS232 data Power: TX: PoE/5VDC (wall wart), RX: 5VDC local Connectors: TX: HDMI in, RJ45 out, RS232, IR; RX: RJ45 in, HDMI out, audio 3.5mm, RS232 Physical: TX wall plate (1-gang), RX 1U shelf/half-rack, metal housing Compliance: CE, FCC, RoHS, HDMI-ATC certified.Approved Makes: Extron, Crestron.Liberty AV
175	SITC of 4K60 18G PRESENTATION SWITCHER/EXTENDER SCOPE: Supply, Installation, Testing & Commissioning of 1RU rack-mount 4K60 18G switcher/extender with: VIDEO PERFORMANCE: 4096×2160@60Hz 4:4:4, 18Gbps, HDCP 2.3, DR10/Dolby Vision INPUTS (4x): 2×HDMI 2.0, 1×DP 1.2, 1×USB-C (DP Alt), +HDBT RX OUTPUTS (2x): HDMI 2.0 + HDBT TX (70m@1080p/40m@4K) USB HUB: 4×USB3.0 + 2×USB2.0, USB-C 65W PD, 100m KVM over HDBT CONTROL: CEC/RS232/IR display control, 1×relay, TCP/IP web GUI HDBT: PoC (48V), bi-directional RS232/IR AUDIO: 8ch embed/de-embed, stereo analog + SPDIF POWER: 100-240VAC, 50W max, <1W standby PHYSICAL: 1RU, ≤3.5kg, 0-50°C operation, 100K hrs MTBF INCLUDES: Rack ears, 3m HDMI cable, IR emitter, RS232 cable, firmware update, EDID programming, 3yr warranty, Pune/Thane service center.TESTING: 4K60 loop test, USB3 transfer, PoC validation, CEC/RS232 functional test. Approved Makes: Crestron HD-PS402, Extron IN1808, Liberty AV, Digitalinx
176	Supply, Installation, Testing & Commissioning (SITC) of compact HDBaseT receiver for SoftCodec switchers with:VIDEO PERFORMANCE: 4K60 4:2:0 (40m) / 1080p60 4:4:4 (70m), HDMI 2.0 output, HDCP 2.2/2.3, HDR pass-through INPUTS: HDBaseT RX (CAT6/6a, 70m max), 1×HDMI 2.0 local input (loop-through/switching) OUTPUTS: 1×HDMI 2.0 (4K60), Audio de-embed (stereo analog 3.5mm + S/PDIF) CONTROL EXTENSION: RS232 bi-directional (TX/RX), IR carrier (38-56kHz), 2×relay contact closures (SPDT) POWER: PoC powered from TX (48V IEEE 802.3at) or local 12VDC adapter, <15W consumption PHYSICAL: Compact desktop/wall-mount, ≤1kg, 0-40°C operation, diagnostic LEDs COMPATIBILITY: Compatible with Crestron DM/Extron DTP/Liberty Digitalinx switchers INCLUDES: Mounting bracket, 12VDC adapter (backup), IR emitter cable (1.5m), terminal block (RS232/relay), user manual, 3yr warranty, Pune/Thane service center. TESTING: 70m CAT6 link test, 4K signal verification, audio de-embed check, RS232/IR/relay functional test, PoC validation. CERTIFICATIONS: CE, FCC Class A, HDCP certified, RoHS compliant, BIS approved.Approved make - Creston, Extron, Liberty AV
177	Supply, Installation, Testing & Commissioning (SITC) of 4K UHD PTZ conference camera with:VIDEO PERFORMANCE: 4K Ultra HD 3840×2160@30fps, 1080p@60fps output, Sony 1/2.8\\" CMOS sensor 8.3MP, H.264/H.265/MJPEG compression OPTICS: 12X optical zoom, 72.5° horizontal FOV (wide), F1.6-2.8 aperture, auto/manual focus, 2D/3D noise reduction, backlight compensation PTZ CONTROL: Pan ±175°, Tilt -90° to +90°, Pan speed 0.1-80°/sec, Tilt speed 0.1-60°/sec, 255 presets (10 via IR remote) VIDEO OUTPUTS: HDMI 2.0, USB 3.0 Type-C UVC 1.1), simultaneous dual stream output CONTROL INTERFACES: RS232 (input), RS485, RJ45 (IP control), IR remote (included), VISCA/Pelco-D/Pelco-P protocols NETWORK: 10/100M Ethernet, PoE IEEE 802.3af, RTSP/RTMP/ONVIF/DHCP, VISCA over IP AUDIO: Built-in dual microphone array, 2D/3D digital noise reduction, audio embedded in USB/IP stream AI FEATURES: Auto-framing, presenter tracking, face detection optimization (Crestron/Extron models) COMPATIBILITY: Windows 7/8/10/11, Mac OS 10.10+, Linux, Android, UVC compliant for Zoom/Teams/Meet/ Webex POWER: PoE (802.3af) or DC 12V/2A adapter (included), 13W max consumption MOUNTING: Desktop, wall-mount, ceiling-mount, tripod compatible (reverse mountable), mounting bracket included PHYSICAL: 171.6×192.6×171.6mm, 1.35kg, 0-40°C operation, SNR >50dB INCLUDES: IR remote control, USB 3.0 cable (3m), power adapter, wall-mount bracket, RS232/RS485 cable, user manual (English/Hindi), 3yr comprehensive warranty, Pune/Thane service center. TESTING: 4K video quality verification, PTZ preset programming (10 positions), USB3.0/HDMI output test, PoE power validation, control protocol (RS232/VISCA) test, video conferencing platform compatibility (Zoom/Teams). CERTIFICATIONS: CE, FCC Class A, RoHS compliant, UVC 1.1 certified, BIS approved.Approved make - Creston, Extron, Liberty AV
178	SITC of 85\\" 4K LED display for indoor digital signage application. Detailed Specifications:- Screen Size: 85 inches (diagonal).Display Technology: Edge LED BLU, VA panel type. Resolution: UHD 4K (3840 x 2160 pixels).Pixel Pitch: 0.4875 x 0.4875 mm.Brightness: 350 nits (typical).Contrast Ratio: 4000:1 (typical).Viewing Angle: 178° horizontal / 178° vertical.Response Time: 8 ms (typical).Color Gamut: 92% DCI-P3 (CIE 1976).Display Colors: 16.7M (true) / 1.07B (dithered 10-bit).Operation Hours: 16/7 (up to 16 hours per day, 7 days a week). Connectivity: HDMI 2.0 x 2 (HDCP 2.2), DVI-D, USB 2.0 x 2, RS232C (in/out), RJ45, Stereo mini jack audio out, IR sensor.Audio: Built-in 10W x 2 channel speakers.Power Consumption: Typical 143W, Max 198W, Rated 180W.Dimensions (W x H x D): 1897.8 x 1080.8 x 56.7 mm (set), VESA mount 600 x 400 mm.Weight: 48.4 kg (set).Bezel Width: 10.9 mm (top/left/right), 12.9 mm (bottom).Software/OS: Tizen 4.0, Built-in MagicInfo S6, SSSP 6.0, Auto Source Switching, LFD Home UI.Processor: Cortex A72 1.7GHz Quad-Core CPU. Additional Features: IP5x dust protection, Wi-Fi, Temperature sensor, Pivot display (landscape/portrait), Clock battery (168 hrs), Haze 2%, Dynamic C/R MEGA.Certifications: ENERGY STAR 8.0, EPEAT, Safety 60950-1, EMC Class A, Security 802.1x. with wall/ceiling mounting bracket Approved make -Samsung, LG, Sony or equivalent
179	SITC of 4x2 collaboration matrix switcher TX-RX Kit .The kit shall support 3 USB host and 8 USB peripheral. The Transmitter shall have 2 USB HOST- 1 USB-C ( with 60w charging) and 1 on USB-B 3.0. and 1 USB - B 3.0 host shall be on the reciver. There shall be 1 HDMI input on transmitter and 2 HDMI in on the receiver. There shall be 1 HDMI loop out on the transmitter and 2 HDMI out on the receiver. The communication between the transmitter and receiver shall be on HDBT 3.0. There shall be audio out on both transmitter and receiver. there shall be push buttons on transmitter and receiver for controlling. The system shall be controllable over the LAN(webpage) and RS-232 port for 3rd party control system. The system shall support resolution upto 4K60 and USB 2.0 High speed with Isochronous support for max camera compatibility. The system shall also support USB3.0 Hub and switching auto switches for BYOM environments. Approved make -Creston, Extron,Liberty AV
180	Supply, Installation, Testing & Commissioning of 7000 Lumens WUXGA Laser Projector (1920×1200), 4K input support (HDMI 2.0/HDBaseT), integrated Wi-Fi + screen mirroring (AirPlay/Miracast), dynamic contrast >2,500,000:1, motorized lens shift/zoom/focus, complete with wireless Wi-Fi card + ceiling mount bracket (100kg capacity). DETAILED TECHNICAL SPECIFICATIONS Light Engine & Performance: Brightness: 7000 ANSI lumens (color/white) Resolution: WUXGA (1920×1200 native, 16:10) 4K Support: 4K@30Hz input (HDMI 2.0, HDBaseT 3G) Contrast Ratio: >2,500,000:1 dynamic (laser dimming) Light Source: Dual blue laser diode (20,000+ hrs @50% brightness) Color Space: Rec.709 / BT.2020 capable Optics & Installation: Lens: Motorized 1.6x zoom (throw ratio 1.71-2.74:1) Lens Shift: V:±50%, H:±15% (motorized memory) Keystone: ±40° V/H (auto + corner correction) Projection: 360° portrait/ landscape rotation Geometry: Edge blending, curvature correction Approved make - Sony ,Epson,Panasonic
181	Supply, Installation, Testing & Commissioning of 200\\" Diagonal Motorized Projection Screen (16:10 aspect, ~174\\"W × 98\\"H view area), matte white 1.1 gain fabric, synchronized tubular motor (quiet <45dB), RF/IR wireless remote + wall switch, black drop-top mask (4\\"), ceiling/wall mount bracket (200kg capacity), complete as per manufacturer's specification. DETAILED TECHNICAL SPECIFICATIONS Screen Dimensions: Diagonal: 200\\" (508cm) Aspect Ratio: 16:10 (Cinema Scope) View Area: 443cm(W) × 249cm(H) Black Masking: 10cm all sides + 10cm top drop Total Case: 460cm(L) × 15cm(H) × 15cm(D) Screen Surface: Material: Matte white PVC / fiber glass laminate Gain: 1.1 (uniform brightness) Viewing Angle: 170° half-gain Compatibility: 4K UHD / 3D / 8K / HDR Backing: Black PVC light-proof Fire Rating: Class B1 / NFPA 701 Motor & Control: Type: Synchronous tubular (110-240VAC 50/60Hz) Speed: 25cm/sec (full drop <30 sec) Noise: <45dB (whisper quiet) Controls: RF wireless remote (50m range, 433MHz) IR remote (10m direct line) Wired wall switch (3-position rocker) 12V trigger input (projector sync) RS-232 / dry contact (AV control) Mechanical: Case: Extruded aluminium (white/black finish) End Caps: Steel with safety interlock Bottom Roller: 7.5cm diameter (perfect lay-flat) Mounting: Ceiling/wall bracket (360° swivel optional) Load Capacity: 150kg screen weight + 50kg wind load Electrical: Power: 100W peak / 20W idle Fuse: 5A slow-blow (internal) Cable: 3-core 2m flex (localized plug) Approved Makes: Da-Lite, Milan, Liberty
182	SITC of 65\\" consumer-grade 4K UHD LED TV suitable for residential/institutional viewing (non-24/7 operation). Supply includes standard accessories. DISPLAY PANEL SPECIFICATIONS Screen Specifications Screen Size (Diagonal): 65 inches (165.1 cm) Panel Type: LED (Direct Lit) with VA/Edge Lit Active Display Area: Approx. 1429 mm (H) × 804 mm (V) Resolution: 3840 × 2160 pixels (4K UHD) Aspect Ratio: 16:9 Pixel Pitch: Approx. 0.372 mm (H) × 0.372 mm (V) Display Performance Brightness (Typical): 300-500 nits Contrast Ratio (Typical): 5000:1 or Mega Contrast Dynamic Contrast: Adaptive Contrast Enhancer Viewing Angle (H/V): 178°/178° Color Technology: Pur Color / Dynamic Crystal Color (90% DCI-P3 typical) Color Depth: 10-bit (1.07 billion colors) HDR Support: HDR10+, HLG Video Processing Processor: Crystal Processor 4K Up scaling: 4K AI Up scaling Refresh Rate: 50/60 Hz (Motion accelerator for smooth motion)Response Time: 8.3 ms (typical) INPUT/OUTPUT SPECIFICATIONS Signal Input HDMI: 3 ports (HDMI 2.0/2.1 with HDCP 2.2, ALLM support on select ports) USB: 1-2 ports (USB 2.0) LAN: RJ45 Ethernet (10/100 Mbps) Wireless: Wi-Fi 5 (802.11ac), Bluetooth 5.2 Audio Built-in Speakers: 20W RMS (2CH, Dolby Digital Plus) Audio Output: Optical Digital Audio Out, eARC on HDMI Control IR Receiver: Front-facing Smart Remote: Solar Cell or standard with voice control TECHNICAL PARAMETERS Frequency and Timing Horizontal Frequency: 30-68 kHz Vertical Frequency: 48-75 Hz Supported Formats: MPEG1/2/4, H.264, H.265 (HEVC), VP9 Orientation and Mounting Orientation: Landscape primary (portrait via software) VESA Mount: 400 × 300 mm or 400 × 400 mm SMART FEATURES & SOFTWARE Operating System OS: Tizen OS (latest version, e.g., 8.0) RAM/Storage: 2 GB RAM, 8 GB storage Apps & Services Pre-installed: Netflix, Prime Video, YouTube, Disney+ Hotstar, Samsung TV Plus Voice Assistants: Bixby, Alexa, Google Assistant built-in Features: Universal Guide, Smart Hub, Multi-View Power Specifications Power Requirements Input Voltage: AC 100-240V, 50/60 Hz Power Consumption (On Mode): 120-150W typical Standby: ≤0.5W Operation Hours: 12-16 hours daily (not 24/7 rated) PHYSICAL SPECIFICATIONS Dimensions and Weight Without Stand (W×H×D): Approx. 1452 × 836 × 59 mm With Stand: Approx. 1452 × 905 × 281 mm Weight: 20-22 kg (without stand) Environmental Operating Temp/Humidity: 10°C-40°C / 0-80% RH (non-condensing) Anti-Glare: Yes (low reflection coating) ACCESSORIES & INCLUSIONS Remote control with batteries Power cable (2m) User manual Table-top stand Wall-mount screws (optional) WARRANTY AND SUPPORT Standard Warranty: 1 year comprehensive Service: Carry-in or on-site (region-dependent) CERTIFICATIONS BIS certified for India CE, RoHS compliant Energy efficiency rating (1-5 star)Approved make - Samsung, LG,Sony
183	Cables, Connectors & Junction Box Supply, Installation testing & commissioning of 12 AWG 2 Core Speaker Cable for commercial audio systems, suitable for in-wall, direct burial, and low capacitance signal transmission. [wire and cable yourway] (https://www.wire and cable yourway.com / belden -1311a -12 -awg-2 -conductor -direct -burial -speaker -cable) Detailed Specifications Conductor Size:12 AWG (stranded bare copper, high conductivity, typically 65x30 or 7x24x34 stranding). Number of Conductors: 2 Core (paired for speaker applications). Conductor Material: Bare Copper (BC) or Tinned Copper (TC), high conductivity. Insulation: Polyolefin or Polypropylene (low capacitance design). Jacket Material: PVC (Polyvinyl Chloride), CL3/CM rated for in-wall use. Jacket Color: White or Black (standard options). Outside Diameter: 0.352 inches (approx. 8.94 mm). Weight: Approx. 0.122 lbs/ft (58 g/m). Temperature Rating: 75°C. Voltage Rating: 300V AC. Ratings: CL3 (in-wall), Direct Burial rated, suitable for outdoor use.Features: Sequential footage marking every 2 feet, high strand count for flexibility, oxygen-free copper for signal purity.Applications:Intercom/PA systems, sound/audio systems, low capacitance for high-fidelity audio.Certifications: RoHS compliant (typical for Belden). Approved Make - Krystal,Belden,Liberty AV
184	Supply, Installation testing & commissioning of 14 AWG 2-conductor twisted pair high-conductivity copper speaker cable, complete with standard accessories (connectors, termination kits, cable ties, labels), suitable for professional audio installations in commercial environments. Detailed Specifications Conductor Gauge: 14 AWG (42x30 stranded tinned copper for flexibility and conductivity).Configuration: 1 twisted pair (2 conductors).Insulation and Jacket Insulation: PVC (Polyvinyl Chloride).Jacket: PVC outer jacket, Chrome color standard.Nominal Outer Diameter: Approximately 0.323 inches (8.2 mm).Bulk Cable Weight: 58 lbs/1000 ft (86 kg/km).Electrical Characteristics Voltage Rating: 300V RMS. Temperature Rating: -20°C to +90°C.DC Resistance: Low due to high-conductivity copper (specific ohms not listed in extracts).Standards: NEC CL3, UL Style 2587 (600V 90°C), EU LVD compliant.Mechanical and Environmental Min. Bend Radius (Install): 3.5 inches (88.9-91 mm).Max. Pull Tension: 94-106.6 lbs (418-48.35 kg). Features: Twisted jacketed construction for reduced crosstalk, RoHS compliant where applicable.Packaging: Reels (500 ft or 1000 ft standard).Applications and Standards Use: Speaker level audio, line level audio, voice communications, panel wiring up to 600V.Certifications: UL, NEC CL3, EN 50575 (Construction Products Regulation). Approved Make - Krystal, Belden, Liberty AV
185	Supply, Installation testing & commissioning of 24 AWG 2-Pair Shielded Microphone Cable for professional audio connections in commercial AV systems (e.g., compatible with Samsung QB85R-B display audio setup). Cable shall feature overall foil + braid shielding for noise rejection, low capacitance, and CM/CL2-rated PVC jacket suitable for in-wall/studio use. Detailed Technical Specifications: Conductor: 24 AWG stranded tinned copper (TC) or bare copper alloy (e.g., 7x32, 19x36, or 45x40 stranding), 4 conductors (2 twisted pairs).Insulation: High-density polyethylene (HDPE/PE), nom. thickness 0.008 in.Shielding: Overall Beldfoil® (100% aluminum foil-polyester tape) + tinned copper braid (65-90% coverage) + drain wire (24 AWG TC).Jacket: PVC, nom. OD 0.135-0.340 in (~3.4-8.6 mm); color: black/grey.Electrical: Nom. capacitance 12-30 pF/ft C-C, 55-58 pF/ft C-SC; impedance 55-120 Ohm; voltage 200-300V RMS; max current 2.1-2.2A per cond. Mechanical: Temp rating -40°C to +75/90°C; bulk wt. 12-25 lbs/1000ft; min. bend radius 2 in; max pull tension 48-67 lbs. Features: Noise-reducing tape (Belden 9452), sequential marking, RoHS compliant, for permanent install or portable mic runs. Length/Quantity: [Specify e.g., 100 meters] Nos. Warranty: Minimum 1 year comprehensive from date of installation. Standards: As per BIS/IEC/UL AWM 2919, approved by Engineer-in-Charge. Approved make -Krystal,Beldon,Liberty AV
186	Supply, installation & testing of Liberty AV HALO-HC10M Active High-Speed HDMI Cable, 10m length (32.8 ft), Male HDMI Type A connectors both ends with L-Grip high-retention gold-plated contacts, directional (Source to Display marked), 28 AWG solid core oxygen-free copper conductors (5PSH + 4C), dual shielding (100% foil + 65% braid), PVC jacket (NEC CL2 rated, CMG FT4), overall dia. 7.3mm, supports HDMI 2.0b up to 4K@60Hz 4:4:4 (18Gbps), HDCP 2.3, HDR, all embedded audio formats, CEC yes, no HEC/eARC, active equalization at Display end powered by HDMI bus (pin 18) or optional Micro USB 5V/0.5A, operating temp 0-75°C, incl. Orbit ID rings (9 colors), as per manufacturer's specs, complete in all respects.approved by Engineer-in-Charge. Approved make -Krystal, Beldon, Liberty AV
187	Supply, installation & testing of Active High-Speed HDMI Cable, 20m length (65.6 ft), directional Male HDMI Type A connectors both ends with L-Grip high-retention gold-plated contacts (Source: 35x20.5x11mm, Display: 38x20.6x11.5mm w/strain relief), 24 AWG solid core oxygen-free copper conductors (5PSH + 4C), dual shielding (100% foil + 65% AL-MG braid), PVC jacket (NEC CL2, CMG FT4), overall dia. 9.0mm, supports HDMI 2.0b 4K@60Hz 4:4:4 (18Gbps), HDCP 2.3, HDR, all embedded audio, CEC yes, no HEC/eARC, active equalization at Display end powered by HDMI pin 18 or Micro USB 5V/0.5A, bend radius unloaded 90mm/loaded 180mm, tensile 20kg, operating temp 0-75°C, incl. Orbit ID rings (9 colors), as per manufacturer's specs, complete in all respects.approved by Engineer-in-Charge.Approved make -Krystal,Beldon,Liberty AV
188	Architectural connectivity patch box 3 x XLR SITC of Architectural Connectivity Patch Box with 3 x XLR Female Connectors, stainless steel flush mount plate, Neutrik NC3FD-LX or equivalent make connectors (gold plated contacts, IEC 61076 compliant), single gang steel flush box (35mm depth), solder cup termination at rear, engraved labelling (MIC 1, MIC 2, MIC 3), complete with SS mounting screws, cable strain relief bushings, test certificates and site testing. Approved makes: Neutrik/RCI Custom/FSR/Legrand or equivalent meeting specification
189	Architectural connectivity Control panel. SITC Architectural Connectivity Control Panel, double gang SS304 plate (146x115mm), 3 x XLR Female (Neutrik NC3FD-LX), 1 x HDMI 2.0, 1 x USB-C (10Gbps+60W), 1 x USB-A 3.0, 1 x RJ45 Cat6, 6 nos. illuminated push buttons (AV1-AV2-Mic-USB-HDMI-Mute), rotary volume control, RS232/IR control interface, 5V DC powered, complete with 50mm flush mount box, Phoenix connectors, 3m RS232 cable, programming, engraved labelling, testing & 24-month warranty. Standards: IEC 60950, CE, RoHS. Approved makes: Extron AAP700/Kramer K-Panel/Crestron Zūm / Legrand or equivalent
190	Supply, installation, testing, and commissioning of all types of patch cords required for intra-rack AV interconnections - audio (conference system controller to DSP/AEC channels, amplifier to DSP), video/control (HD BaseT matrix TX/RX USB extensions, LED display control), complete with velocity-rated PVC jacket, snag less boots, and strain relief.(Excluding all types of inter connection cable) Complete as directed by engineer in charge.
191	Supply, Installation testing & commissioning (SITC) of UL Listed Connector complete with all standard accessories. Supply, Installation, Testing & Commissioning of UL Listed Pressure Wire Connector complete with standard accessories for 600V building wire applications, rated 20-50A, 14-4 AWG copper/aluminium conductors, flame-retardant UL94 V-0 housing, suitable for line-side/service entrance, torque-marked 20-35 in-lbs, with shear-off wings/spring inserts, complete as specified. Key Technical Specs: UL Standard: UL 486A/B/C (wire connectors), CSA certified Rating: 600V max, 105°C temp rise, 600V building wire/1000V fine wire Wire Range: 14-4 AWG solid/stranded Cu/Al (1.5-25mm²) Current: 50A continuous @ 75°C Construction: Spring pressure + shear bolt, nylon/polyamide housing Terminals: Tin-plated copper alloy, anti-oxidation compound Accessories: Torque wrench adapter, wire stripping guide, ID labels Marking: UL file number, wire range, torque specs printed (All types of connector required )
192	Supplying and fixing 12Uwallmountrack (Dimension-DxWxH–500x600x635 mm) as per specification No. WG-NAS/RAK
193	Supplying and fixing 24 U floor mount rack (Dimension- DxWxH –800x600x1265 mm) as per specification No. WG-NAS/RAK
194	SITC of Chairman unit with priority button, Microphone length of 450 - 500 mm; Flexible Stem, LED indication for Microphone On/Request to Speak; Built-in stereo headphone socket with Volume control, Immunity to mobile phone interference; changeable microphone buttons and slide switch at bottom for configuration as a participant; Plug-and-play functionality; white indicates possible to speak, green indicates request to speak and flash green indicates next in line to speak; Frequency response: 100 Hz to 19 kHz; S/N ratio : >90 dBA or better; Headphones load impedance > 32 ohms < 1k ohm; Loudspeaker nominal output : 72 dB SPL, complete with standard accessories as required. Approved Make -Bayerdynamic, Bosch,Shure
195	SITC of Delegate unit with Microphone length of 450 - 500 mm, Felxible Stem, LED indication for Microphone On/Request to Speak; Built-in stereo headphone socket with Volume control; Immunity to mobile phone interference; changeable microphone buttons and slide switch at bottom for configuration as a participant; Plug-and-play functionality; white indicates possible to speak, green indicates request to speak and flash green indicates next in line to speak; Frequency response : 100 Hz to 19 kHz; S/N ratio : >90 dBA or better; Headphones load impedance > 32 ohms < 1k ohm; Loudspeaker nominal output : 72 dB SPL, complete with standard accessories. Approved Make -Bayerdynamic,Bosch
196	SITC of Digital Controller with Built‑in MP3 recorder with internal memory and USB recording; Plug- and-play functionality; Built‑in Digital Acoustic Feedback Suppression (DAFS) for ensuring superior speech intelligibility; Up to 80 Discussion Devices can be connected to a single Control Unit; the system can be expanded to a maximum of 245 Discussion Devices; Sample rate 44.1 kHz; Frequency response: 30 Hz to 20 kHz; Ethernet speed: 1 Gb/s; S/N: > 93 dBA; THD <0.1%; Recording/ Playback (bit rate): 64, 96, 128, 256 Kbit/sec; loudspeaker nominal output: 72 dB SPL; Discussion modes: Open mode, Override mode, Voice activation mode, Push to talk (PTT) mode, Camera control, complete with standard accessories as required. Approved Make - Bayerdynamic, Bosch,
197	SITC of Conference Multi core Extension Cable 10mtr, complete with standard accessories. Technical Requirements 1. Cable Specifications: CAT5e/CAT6, 8-core shielded twisted pair, pure copper conductors (AWG 24) LSZH jacket, overall foil/braided shield, 100 MHz bandwidth RJ45 gold-plated connectors (50μ\\" plating), pre-terminated both ends Length: 10m ±0.1m 2. Electrical Performance: Impedance: 100Ω ±15Ω Max capacitance: 56pF/m, DC resistance: 9.38Ω/100m Voltage rating: 48V DC, supports power + data transmission 3. Mechanical Properties: Operating temp: -20°C to +60°C Min bend radius: 4x cable OD (6-8.5mm) Tensile strength: 110N minimum Standards Compliance IEC 61156-5, ISO/IEC 11801, TIA/EIA-568-B, EN 50173 RoHS & REACH compliant, fire rated (IEC 60332-1) approved make - Bayerdynamic, Bosch, Shure
198	Supply, Installation, Testing & Commissioning of Gooseneck Microphone with On/Off Pushbutton Switch, Pre-polarized condenser, Cardioid pattern, Frequency response 50Hz-20kHz (±3dB), Nominal impedance <100Ω, Max SPL 130dB (1% THD), Phantom power +12V to +48V, complete as per manufacturer's specification. Key Technical Specifications: Acoustic Performance: Frequency Response: 50 Hz - 20 kHz Polar Pattern: Cardioid (100° acceptance angle @1kHz) Sensitivity: 18 mV/Pa (at 1kHz, 0dB=1V/Pa) Max SPL: 130 dB SPL (1% THD, 0dB=1V/Pa) Equivalent Noise Level: 26 dB(A) (A-weighted) Signal-to-Noise Ratio: 68 dB (1kHz, 1Pa) Nominal Impedance: 50-100Ω balanced Electrical Characteristics: Phantom Powering: P12 - P48 VDC (IEC 61938 compliant) Current Consumption: 2-3 mA Connector: 3-pin XLR-M (locking, balanced) Cable: Permanently attached 1.5m mini-XLR to XLR (shielded) Mechanical Design: Microphone Type: Pre-polarized condenser (back-electret) Gooseneck Length: 400-450 mm (dual flexible sections) Diameter: 19mm capsule / 8mm gooseneck Construction: Matte black metal gooseneck, stainless steel capsule grille Switch: Momentary push-on/push-off (LED illuminated, latching) Mounting: 5/8\\"-27 threaded flange base (table/wall mount) Weight: 200-250g (complete assembly) Environmental: Operating Temperature: 0°C to +50°C Humidity: 0-95% RH (non-condensing) RF Immunity: Shielded against mobile/wireless interference Compliance: CE, RoHS, FCC Part 15, EN 55103-1/2 (EMI/EMC). Approved make -Sennheiser, Bayerdyamic, .
199	Supply, Installation, Testing & Commissioning of Wireless Handheld Microphone System, Dynamic microphone capsule, Frequency response 40Hz-16kHz (±3dB), exceptional feedback rejection (>20dB gain before feedback), superior isolation from handling/plosive noise, UHF operation (470-865MHz), complete as per manufacturer's specification.DETAILED TECHNICAL SPECIFICATIONS Transmitter (Handheld): Microphone Type: Dynamic (cardioid pattern, 120° pickup) Frequency Response: 40Hz - 16kHz (±3dB) Sensitivity: -54dB re 1V/Pa (1kHz) Max SPL: 149dB (1% THD) Feedback Rejection: >20dB gain-before-feedback Self-Noise Rejection: >25dB (handling/plosives) RF Output: 10/30mW selectable (country compliant) Battery Life: 10-14 hours (2×AA alkaline) Dimensions: 265mm(L) × 50mm(⌀) Weight: 245g (without batteries) Receiver: Type: True diversity half-rack / tabletop Frequency Range: UHF 470-865MHz (license-free bands) Channels: 12 simultaneous (interference-free) Squelch: Adjustable (-100dBm to -30dBm) Outputs: XLR balanced + 1/4\\" unbalanced Display: OLED/LCD (battery, AF/RF meter, frequency) System Performance: Range: 100m line-of-sight (60m typical indoor) Latency: <3.5ms (analog UHF) Dynamic Range: >110dB (A-weighted) THD: <0.5% (1kHz, ±30kHz deviation) S/N Ratio: >105dB Approved make - Sennheiser, Bayerdyamic, Audiotechnica.
200	Supply, Installation, Testing & Commissioning of Boundary Layer Microphone for desktop sound reinforcement, low-profile design (<1\\" height), seamless integration with conference tables, cardioid/hemispherical pattern, phantom-powered condenser, complete as per manufacturer's specification. DETAILED TECHNICAL SPECIFICATIONS Acoustic Performance: Pickup Pattern: Cardioid or half-cardioid (120° coverage) Frequency Response: 40Hz - 20kHz (±3dB) Sensitivity: 10-16 mV/Pa (1kHz) Max SPL: 130-140 dB (1% THD) Self-Noise: 25-30 dB(A) S/N Ratio: >65 dB (1kHz, 1Pa) Electrical: Power: Phantom 12-48V DC (3mA consumption) Output Impedance: <200Ω balanced Connector: TA4F/TB3M mini-XLR or 3-pin XLR Cable: Permanently attached 7.5m (thin shielded) Physical Design: Dimensions: 85×85×25mm (W×D×H above surface) Housing: Black non-reflective polymer/metal base Mounting: Permanent adhesive or screw-down (removable) Weight: 80-120g Finish: Matte black (fingerprint resistant) Approved make -Sennheiser, Bayerdyamic, Audiotechnica.
201	Supply, Installation, Testing & Commissioning of Shotgun Electret Condenser Microphone for overhead sound reinforcement, hyper/supercardioid pattern, integrated wire aiming hanger (2-3m adjustable drop), phantom-powered, low-profile design for choir/ensemble coverage, complete as per manufacturer's specification.DETAILED TECHNICAL SPECIFICATIONS Acoustic Performance: Type: Electret condenser (back-electret capsule) Polar Pattern: Supercardioid/hypercardioid (90° acceptance @1kHz) Frequency Response: 40Hz - 20kHz (±3dB) Sensitivity: 12-20 mV/Pa (1kHz, 0dB=1V/Pa) Max SPL: 130-140 dB (1% THD, 0dB=1V/Pa) Self-Noise: 22-28 dB(A) S/N Ratio: >66 dB (1kHz, 1Pa) Electrical: Phantom Power: P12-P48 VDC (4-8mA consumption) Output Impedance: <150Ω balanced Connector: 3-pin XLR-M (locking) Cable: 3m steel-braided mini-XLR to XLR (hanging rated) Physical Design: Length: 250-400mm interference tube Diameter: 19-25mm barrel / 12mm capsule Weight: 150-250g (mic only) Hanger: Integrated wire suspension (2-3m drop, 360° swivel) Finish: Non-reflective matte black. Approved make -Sennheiser, Bayerdyamic, Audiotechnica.
202	Supply, Installation, Testing & Commissioning of Wireless Lapel Microphone System, Permanent polarized condenser lavalier (omni), Frequency response 25Hz-18kHz (±3dB), Max SPL 130dB, Bandwidth 42MHz (UHF), THD <0.9%, S/N >110dB, 8+ hours battery operation, complete as per manufacturer's specification.DETAILED TECHNICAL SPECIFICATIONS Lavalier Microphone (Transmitter): Type: Permanent polarized electret condenser Polar Pattern: Omnidirectional (360° coverage) Frequency Response: 25Hz - 18kHz (±3dB) Max SPL: 130 dB (1% THD @1kHz) Sensitivity: -40 to -46 dB re 1V/Pa (1kHz) S/N Ratio: >110 dB (A-weighted, 94dB SPL) THD: <0.9% (50Hz-20kHz, rated power) Bodypack Transmitter: RF Power: 10/30mW selectable (country compliant) Bandwidth: 42MHz operating range (960+ frequencies) Modulation: Wideband FM (±45kHz deviation) Battery Life: 8 hours minimum (2×AA alkaline) Display: OLED/LCD (battery/RF/audio metering) Input: TA4F/3.5mm locking lavalier connector True Diversity Receiver: Type: Half-rack/tabletop (rack ears included) Antenna: Removable 1/4-wave (front/rear mount) Outputs: Balanced XLR + unbalanced 1/4\\" TRS Squelch: Dual-squelch (tone code + noise) Scanning: Auto frequency scan + IR sync System Performance: Range: 100m LOS / 60m indoor typical Latency: <3ms (analog UHF) Dynamic Range: >115 dB Freq Stability: ±0.005%Approved make - Sennheiser, Bayerdyamic, Audiotechnica.
203	Supply, Installation, Testing & Commissioning of Wired Handheld Dynamic Microphone, Frequency response 40Hz-16kHz (±3dB), Dynamic capsule, exceptional feedback rejection (>25dB gain before feedback), superior isolation from handling/breath noise, XLR connector with 5m cable, complete as per manufacturer's specification.DETAILED TECHNICAL SPECIFICATIONS Acoustic Performance: Type: Moving coil dynamic Polar Pattern: Supercardioid (100° acceptance angle) Frequency Response: 40Hz - 16kHz (±3dB) Sensitivity: 2.0-2.6 mV/Pa (1kHz) Max SPL: >150 dB (for 1% THD) Feedback Rejection: >25dB gain-before-feedback Proximity Effect: Controlled (bass boost <6dB @10cm) Mechanical Design: Capsule Shock Mount: Internal suspension system Grille: 3-layer pop filter (steel mesh + foam) Housing: Die-cast zinc alloy (black enamel finish) Length: 185-200mm Diameter: 47-51mm Weight: 300-350g Electrical: Output Impedance: 350Ω balanced (600Ω nominal) Load Impedance: ≥1000Ω recommended Connector: 3-pin XLR-M (locking/recessed) Cable: 5m SOMMER Cable (high-flex, shielded)Approved make - Sennheiser, Bayerdyamic, Audiotechnica.
204	Audio Mixer Supply, Installation, Testing & Commissioning of 32-Channel Analog Mixer with 24 mic/line inputs, D-PRE mic preamps, 14 aux/group buses, 4-band EQ (mid-sweep), phantom power per channel, dual SPX effects, meter bridge, complete as per manufacturer's specification.DETAILED TECHNICAL SPECIFICATIONS Input Channels: Mic Inputs: 24× mono (XLR balanced, D-PRE Class-A) Line Inputs: 32 total (24 mono + 4 stereo TRS/XLR combo) Phantom Power: +48V individually switchable (mic channels) Gain Range: 60dB (mic), 44dB (line) Max Input Level: +24dBu (mic/line) EQ & Dynamics (Per Channel): EQ Type: 3-band (mono) / 2-band (stereo) with mid-sweep High S helving: ±15dB @10kHz Mid Peaking: ±15dB @250Hz-5kHz (sweepable) Low Shelving: ±15dB @100Hz HPF: 80Hz 12dB/oct (switchable) Buses & Outputs: Aux Sends: 6× mono aux (pre/post fader) FX Sends: 2× stereo FX (to SPX processors) Group Buses: 4× stereo groups (XLR main out) Matrix: None (standard analog) Main Outputs: Stereo XLR + 1/4\\" TRS (balanced) Monitor Outputs: 2× control room, 2-track return Effects: Processors: Dual SPX digital effects Types: Reverb (16), Delay (13), Modulation (16), Distortion (2) Parameters: Editable (decay, depth, speed) Metering & Controls: Meters: 31-segment LED (pre/post fader) Faders: 60mm dust-proof ALPS taper Talkback: Dedicated mic input + aux send Cue System: PFL/AFL solo (LED indication) Physical: Frame Size: 32-channel inline (8U rack height) Dimensions: 1,045mm(W) × 202mm(H) × 755mm(D) Weight: 21kg Power: 100-240VAC universal (internal PSU) Audio Performance: THD+N: <0.1% (20Hz-20kHz, 14dBu @600Ω) Frequency Response: 0/-1.0/-3.0dB 20Hz-20kHz Crosstalk: -64dB @1kHz (adjacent channels) Noise Floor: -128dBu EIN (mic preamp).Approved make - Yamaha, Dynacord, Allen & Heath Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Maharashtra Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction 900 Beded District Civil And Superspeciality Hospital, Nurses Training Center & Hostel Buildings At Civil Hospital Complex Thane, Tal.& Dist. Thane. (Providing, Fixing & Supplying Furniture), Thane-Maharashtra

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction 900 Beded District Civil And Superspeciality Hospital, Nurses Training Center & Hostel Buildings At Civil Hospital Complex Thane, Tal.& Dist. Thane. (Providing, Fixing & Supplying Furniture), Thane-Maharashtra

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us