|
| 1 | Earth work in excavation in trenches ( not exceeding 1.5 m in width as well as 10 sqm on plan ) including dressing of sides and ramming of bottoms lift up to 1.5 m in all kinds of soils |
| 2 | By Manual means |
| 3 | By Mechanical means |
| 4 | Earth work in bulk excavation over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including disposal of excavated earth lead up to 50m and lift up to 1.5 m as directed by engineer in charge. By manual means : All kinds of soil. |
| 5 | Earth work in bulk excavation by mechanical means (Hydraulic excavator ) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including disposal of excavated earth lead up to 50m and lift up to 1.5 m as directed by engineer in charge. : All kinds of soil. |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 7 | Cutting road and making good the same including supply of extra quantities of material i.e. crushed aggregate, moorum screening, red bajri |
| 8 | Bituminous portion |
| 9 | Water bound macadam. |
| 10 | Cutting of macadum ( Bitminuous portion) incl disposal and making good same with rich mix CC upto a depth of 0.30M |
| 11 | Upto 1Sqm |
| 12 | Upto 1.50Sqm |
| 13 | Upto 2.0 sqm |
| 14 | Upto 2.50 Sqm |
| 15 | Upto 3.0Sqm |
| 16 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. |
| 17 | For thickness of tiles 10 mm to 25 mm |
| 18 | For thickness of tiles above 25 mm and upto 40 mm. |
| 19 | Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge |
| 20 | 1:3:6 or richer mix (i/c equivalent design mix) |
| 21 | 1:4:8 or leaner mix (i/c equivalent design mix) |
| 22 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge |
| 23 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 24 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below |
| 25 | Of area beyond 3 sqm. |
| 26 | Dismantling wood work in frames, trusses, purlins and rafters upto 10meters span and 5 meters height including stacking the material within 50meters lead : |
| 27 | Of sectional area 40 sqcm. and above |
| 28 | Of sectional area below 40 sqcm. |
| 29 | Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in |
| 30 | R.S. Joists |
| 31 | Channels, angles, tees and flats |
| 32 | Dismantling steel work in built up sections in angles, tees, flats andchannels including all gusset plates, bolts, nuts, cutting rivets, welding etc.including dismembering and stacking within 50 meters lead. |
| 33 | Hand packing stone in wire crates incl. Cost of stones, wire crates all carriages of boulder from diferent pockets of Nalla for an average distamnce of 0.5 Km and crate from source |
| 34 | Constructing muthu bunds, comprising boulders and wood bushes in alternate layers; including working in water situations. |
| 35 | Supply of boulders incl pitching but excl. carrige |
| 36 | Supply of firewood i/c all carriages complete job |
| 37 | Suply of polyethene for checking of seepages incl all carriages etc |
| 38 | Hire Charges of water pumpset as directed by Engineer-in-Charge excl. cost of fuel , i/c operator charges i/c all types of carriages complete job |
| 39 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 40 | Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 41 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 42 | Foundations, footings, bases of columns etc. for mass concrete. |
| 43 | Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc. |
| 44 | Suspended floors, roofs, landings, balconies and access platforms. |
| 45 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars |
| 46 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 47 | 12mm Cement plaster finished with a floating coat of neat cement of mix::1 : 4 ( 1 cement : 4 fine sand) |
| 48 | Circular work not exceeding 6m in radius |
| 49 | Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers: |
| 50 | Supply of oxygen cylinders incl all carriages upto site of work ( For clearence of blockades ) |
| 51 | 20 Pound Cylinder |
| 52 | 120 Pound Cylinder |
| 53 | Dismantaling of G.I Pipes incl E/W and refilling complete job |
| 54 | Upto 40mm Nominal bore |
| 55 | Above 40mm nominal bore |
| 56 | Dismantling of D.I Pipes by manual/ mechanical means incl. removing of rubber gaskets, defrosting the pipes by placing the same on firewood incl. cost of firewood, kerosene,oil, salt incl. stacking at site complete as per site condition. |
| 57 | Includig excavation & refIlling trenches. |
| 58 | 100mm to 150 mm D.I Pipe |
| 59 | Above 150 mm dia upto 300 mm dia. |
| 60 | Excluding excavation and refilling trenches. |
| 61 | 100mm to 150 mm D.I Pipe |
| 62 | Above 150 mm dia upto 300 mm dia. |
| 63 | Dismantling of G.I Pipes by manual/ mechanical means , defrosting the pipes by placing the same on firewood incl. cost of firewood, kerosene,oil, salt incl. stacking at site complete as per site condition. |
| 64 | Includig executaion & refIlling trenches. |
| 65 | Upto 150 mm diameter. |
| 66 | Above 150 mm dia upto 300 mm dia. |
| 67 | Excluding excavation and refilling trenches. |
| 68 | 25 mm to 150 mm Pipe |
| 69 | Above 150 mm dia upto 300 mm dia. |
| 70 | Dismantling C I Pipes manually /by mechanical means breaking lead caulked joints,melting of lead and making into blocks including stacking of pipes ,E/W and refilling within 50 m lead as per directions of Engineer in Charge |
| 71 | Upto 150 mm diameter. |
| 72 | Above 150 mm diaupto 300 mm dia. |
| 73 | Above 300 mm diameter. |
| 74 | Providing push on joints to centrifugally cast (Spun) Ductile iron pipes incl testing of joints and cost of rubber gaskets |
| 75 | 100mm Dia Pipe |
| 76 | 150mm Dia Pipe |
| 77 | 200mm dia Pipe |
| 78 | 250mm dia Pipe |
| 79 | L/F Of Pipes excluding cost of Pipes and earth work but including all carraiages, leads & lifts complete job |
| 80 | 100mm Dia G.I Pipe |
| 81 | 80mm Dia G.I Pipe |
| 82 | 65mm Dia G.I Pipe |
| 83 | 50mm Dia G.I Pipe |
| 84 | 40mm Dia G.I Pipe |
| 85 | 25mm Dia G.I pipe |
| 86 | 20mm dia G.I Pipe |
| 87 | Providing fixing of MS Flanges 10mm Thick incl Cost of nuts, bolts washers and all carriages |
| 88 | 100mm Dia |
| 89 | 80mm Dia |
| 90 | 125mm Dia |
| 91 | 150mm Dia |
| 92 | Laying in position D.I Pipes excl cost of earthwork and refilling but including all carraiages, leads & lifts complete job |
| 93 | Supply of Spun Yarn complete |
| 94 | Silt Clearance of Canals/structures by Mechanical means incl disposal upto a lead of 50 m and lift 1.5 m. |
| 95 | Silt Clearance of Canals/structures by Manual means incl disposal upto a lead of 50 m and lift 1.5 m. |
| 96 | Providing lighting arrangements during night hours i/c genset, fuel all complete. |
| 97 | Supply of Kerosine oil i/c all carraiges complete job |
| 98 | Supply of Petrol oil i/c all carraiges complete job |
| 99 | Supply of Diesel i/c all carraiges complete job |
| 100 | Supply of Pipes to be dumped in Divisional store i/c all carraiges, leads and lifts complete job. |
| 101 | 20mm GI (Light) |
| 102 | 25mm GI (Light) |
| 103 | 40mm GI (Light) |
| 104 | 50mm Dia GI (Light) |
| 105 | 65mm Dia GI (Light) |
| 106 | 80mm Dia GI (Light) |
| 107 | 100mm Dia GI (Light) |
| 108 | 100mm Dia DI (K7) |
| 109 | 150mm Dia DI (K7) |
| 110 | 200mm Dia DI (K7) |
| 111 | 250mm Dia DI (K7) |
| 112 | 300mm Dia DI (K7) |
| 113 | Carriage of pipes, Bleaching Powder, Alum or any other material by Mini Trucks from Divisional store to various locations, i/c all loading, unloading, leads & lifts complete job. Carraige of pipes is not covered under this item. |
| 114 | Upto 5Kms |
| 115 | Upto 10Kms |
| 116 | Upto 15Kms |
| 117 | Upto 20Kms |
| 118 | Upto 25Kms |
| 119 | Above 25Kms |
| 120 | Rethreading of New Pipes or damaged ends of GI Pipes |
| 121 | 40mm Dia |
| 122 | 50mm Dia |
| 123 | 65mm Dia |
| 124 | 80mm Dia |
| 125 | 100mm Dia |
| 126 | Deployment of Tractor with Trolly and storage Tanks incl. all necessary fittings and fuel charges included provide drinking water facilities in case of non availability of piped water complete |
| 127 | up to 5 kms |
| 128 | up to 10 Kms |
| 129 | up to 20 Kms |
| 130 | Providing and fixing of PVC Water tanks i/c all carriage complete job |
| 131 | Providing and fixing of PVC pipes with specifications conforming to IS-4985 & IS-15801 and reputed make i/c all fittings all carriages complete job |
| 132 | Welding of damaged spots incl. hire charges of welding plant with CI welding Rods All cariages complete job1 By gas plant |
| 133 | By electric plant |
| 134 | Providing and fixing of different Pipe Specials of standard make as directed by Engineer-in-Charge i/c all carriages complete job |
| 135 | 250 mm Equal Tee |
| 136 | 200 mm D.I Bend |
| 137 | 150 mm D.I Bend |
| 138 | 150 mm Equal Tee |
| 139 | 125 mm Bend |
| 140 | 100 mm G.I Bend |
| 141 | 100 mm G.I Equal Tee |
| 142 | 100 mm G.I Union |
| 143 | 100-80 Reducer Socket |
| 144 | 100-65 Reducer Socket |
| 145 | 100 x 100 x 80 Tee |
| 146 | 100 x 100 x 65 Tee |
| 147 | 100 x 100 x 50 Tee |
| 148 | 100 x 100 x 40 mm Tee |
| 149 | 100 x 100 x 25 mm Tee |
| 150 | 100 x 100 x 20 mm Tee |
| 151 | 100 mm G.I Elbow |
| 152 | 80 mm G.I Union |
| 153 | 80-65 Reducer Socket |
| 154 | 80-50 mm Reducer Socket |
| 155 | 80 mm G.I Elbow |
| 156 | 80 x 80 x 50 mm Tee |
| 157 | 80 x 80 x 40 mm Tee |
| 158 | 80 x 80 x 25 mm Tee |
| 159 | 80 x 80 x 20 mm Tee |
| 160 | 65 mm G.I Union |
| 161 | 65 x 65 x 20 mm Tee |
| 162 | 65 x 65 x 25 mm Tee |
| 163 | 65 x 65 x 40 mm Tee |
| 164 | 65-50 Reducer Socket |
| 165 | 50 mm G.I Union |
| 166 | 50 mm G.I Elbow |
| 167 | 50 x 50 x 20 mm Tee |
| 168 | 50 x 50 x 25 mm Tee |
| 169 | 50 x 50 x 40 mm Tee |
| 170 | 50 mm Equal Tee |
| 171 | 50-40 Reducer Socket |
| 172 | 40 mm G.I Union |
| 173 | 40mm G.I Elbow |
| 174 | 40 x 40 x 20 mm Tee |
| 175 | 40 x 40 x 25 mm Tee |
| 176 | 40-25 Reducer Socket |
| 177 | 40-20 Reducer Socket |
| 178 | 25 mm G.I Union |
| 179 | 25 x 25 x 20 mm Tee |
| 180 | 25 mm Equal Tee |
| 181 | 20 mm Equal Tee |
| 182 | 20 x 20 x 15 mm Tee |
| 183 | 15 mm Push Cock |
| 184 | 20 mm G.I Elbow |
| 185 | 25 mm G.I elbow |
| 186 | 20 mm Nipple |
| 187 | 25 mm Nipple |
| 188 | Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc.. Confirming to IS:14846 read with latest amendments. |
| 189 | 80 mm dia. Class 1 |
| 190 | 100 mm dia. Class 1 |
| 191 | 125 mm dia. Class 1 |
| 192 | 150 mm dia. Class 1 |
| 193 | 200 mm dia. Class 1 |
| 194 | 250 mm dia. Class 1 |
| 195 | 300 mm dia. Class 1 |
| 196 | Providing and fixing D.I. sluice valves Class 1 (with cap) complete with rubber insertions, bolts, nuts, extention rod, joint connector, supporting pedestal with base plate, top plate and necessary anchoring bolts etc. Confirming to IS:14846 read with latest amendments.( reputed make VAG, Kirloskar) |
| 197 | 80 mm dia. |
| 198 | 100 mm dia. |
| 199 | 125 mm dia. |
| 200 | 150 mm dia. |
| 201 | 200 mm dia. |
| 202 | 250 mm dia. |
| 203 | 300 mm dia. |
| 204 | Providing and fixing of CI Sluice valves ( with cap) complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) . Class I |
| 205 | 100 mm dia. |
| 206 | 125 mm dia. |
| 207 | 150 mm dia. |
| 208 | 200 mm dia. |
| 209 | 250 mm dia. |
| 210 | 300 mm dia. |
| 211 | Providing and fixing Gun metel gate valve with C.I Wheel of approved quality with (screwed end). |
| 212 | 32mm Dia Gate Valve |
| 213 | 40mm Dia Gate Valve |
| 214 | 50mm Dia Gate Valve |
| 215 | 65mm Dia Gate Valve |
| 216 | 80mm Dia Gate Valve |
| 217 | 100mm Dia Gate Valve |
| 218 | Providing of different Tools and equipments of differenet sizes |
| 219 | Pipe Wrench 600mm |
| 220 | Pipe Wrench 900mm |
| 221 | Chain Tong 100mm |
| 222 | Chain Tong 80mm |
| 223 | Hexa Blades without frame |
| 224 | Hexa Blades with frame |
| 225 | Steel Jable |
| 226 | Pipe Cutter 80mm |
| 227 | Pipe Cutter 100mm |
| 228 | Pipe Cutter 150mm |
| 229 | Rain Coat |
| 230 | Rubber Snow boots |
| 231 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). |
| 232 | 50 mm dia. |
| 233 | 80 mm dia. |
| 234 | 100 mm dia. |
| 235 | Supplying of RBM, including extraction,royality etc complete dumping of RBM, levelling and dressing incl carriage by mechanical/manual means from source upto site of work incl loading ,unloading and stacking complete, cost of all T&P involved.complete job. |
| 236 | Supplying of Empty Cement Bags including filling of EC Bags with earth/sand including cost of earth/sand, sewing and placing in position, including carriages, all leads and lifts complete job. |
| 237 | Supply of labours |
| 238 | skilled |
| 239 | unskilled |
| 240 | Clearing snow (with frost) from Roads/ along pipe line/canal head works & intake channels, manually upto required snow dept as per site conditions using pick axes ,Blow Lumps and shovels incl cost of all T&P.Complete job. |
| 241 | Clearing Snow (without frost) from Roads, manually; |
| 242 | Snow depth over 150 mm but upto 250mm |
| 243 | Snow depth over 250 mm but upto 350mm |
| 244 | Snow depth over 350 mm but upto 450mm |
| 245 | Snow depth over 450 mm but upto 550mm |
| 246 | Snow depth over 550 mm but upto 650mm |
| 247 | Snow depth over 650 mm but upto 750mm |
| 248 | Snow depth over 750 mm but upto 850mm |
| 249 | Snow depth over 850 mm but upto 950mm |
| 250 | Snow depth over 950 mm but upto 1050mm |
| 251 | Snow depth over 1050 mm but upto 1150mm |
| 252 | Snow depth over 1150 mm but upto 1250mm |
| 253 | Providing/Fabricating, fixing of M.S fittings viz bends, Tees, double collars, tail pieces of suitable degrees to be fabricated from 6mm/8mm thick M.S plate as per the requirement of site. The item also includes cost of welding charges,cutting,threading ends etc. The work should be leak proof . The job is to be paid in fitted and finished form and is to be carried out as per the directions of site in charge.complete job. |
| 254 | Supply of Rubber insertions (Gaskets) to D.I pipes. |
| 255 | 200mm dia |
| 256 | 150mm dia |
| 257 | 100mm dia |
| 258 | Supply of Rubber washers to G.I pipes. |
| 259 | 150mm dia |
| 260 | 100mm dia |
| 261 | 80mm dia |
| 262 | 65mm dia |
| 263 | Slip Clearance In soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m. |
| 264 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 265 | Structural steel work in single sections, and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 266 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 267 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 268 | Providing and laying in poistion 1000mm dia 225 mm in depth precast cement concrete rings for sludge/waste water including earthwork , disposal carriage loading & unloading complete job. |
| 269 | Providing and laying in poistion 1000mm dia and 50 & 65 mm in depth precast cement concrete lid over trench incl. loading , unloading, carriage complete job. |
| 270 | Supply and filling of filter media from approved source - Gravel (Graded gravel - size ranging from 2.0mm to 40.00 mm) in filter beds. Including all carriages, complete job |
| 271 | Supply and filling of filter media from approved source - Sand (Coarse filter sand - in filter beds. Including all carriages, complete job |
| 272 | Providing and fixing of HDPE pipes; PE-100, PN-10 |
| 273 | 110 mm |
| 274 | 90 mm |
| 275 | 63 mm |
| 276 | 50 mm |
| 277 | 40 mm |
| 278 | 20mm Please Enable Macros to View BoQ information |
