Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:5:10(1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources ) |
| 2 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm |
| 3 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture |
| 4 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 5 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only |
| 6 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm |
| 7 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 8 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. |
| 9 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (Where ever required) extruded profiles having minimum wall thickness of 1.70mm for Series R1 and R2 profiles and 2.10mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD specification, uPVC extruded glazing beads, interlocks and inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-charge.Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for:(i) Sites with basic wind speed> 45 m/sec as per IS 875-Part 3. (ii) Sites with structure height more than 20m for all wind speeds. Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (65mm & above) x (40mm & above) & glazed sash (25mm & above) x (50mm & above) & fly screen sash (18mm & above) x (40mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 meter). |
| 10 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 10 x 80 mm |
| 11 | Providing and laying Vitrified titles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size. Size of Tile 600 x 1200mm. |
| 12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 13 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 14 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1cement: 4 coarse sand) |
| 15 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete |
| 16 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 17 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. |
| 18 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 19 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 20 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 21 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 22 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 23 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness |
| 24 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width |
| 25 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. |
| 26 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer -in -charge (Door handle, lock and stopper etc. to be paid separately). |
| 27 | GST @ 0.973 multiplying factor on DSR 2023 (On Rs. 9,98,072/-) |
| 28 | Providing and fixing in position wall paneling of Credence Wooden Esto Acoustic panels model no. GRV-P of width 128/144/192/288 mm, thickness of 16mm and length 2440 mm made up of moisture resistant high density fiber board with minimum density of 850 Kg/m3 substrate with a laminated facing as per the approved shade / species & finish with melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 2mm groove & 14mm pitch/4 mm groove & 28 mm pitch/3 mm groove & 21 mm pitch/2 mm groove & 16 mm pitch. The panels shall have fire resistance of Class I, BS 476 part 7. The edges of the panels shall be “tongued-and- grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece and backed with 50mm thick rock wool layer as directed by the Engineer-in-Charge. The panel shall be mounted on special channels using clips as approved by the Engineer - in-charge. Install G.I stud of section 48X34X36 mm or as approved by the Engineer -in- Charge on the solid wall vertically using screws and plugs at spacing of 600mm centre-to-centre. Screw the aluminium channel (keel) horizontally on G.I stud 600mm centre to centre. Install the first set of wooden panels by inserting the clips vertically. For border channel insert the groove of the panel in to the projecting flange of the aluminium clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channel into the next aluminium channel (keel) and simultaneously fill the gap between wall & panel by 50 mm thick rock wool having density of 48 kg/m3. Continue the process till the actual height is achieved. Use clips for border channel to finish off the installation, finish the edges using wood moulding of matching colour as approved by Engineer-in- Charge. The installed panels should give an NRC minimum of 0.9. |
| 29 | Providing and fixing Credence soft fiber acoustical false ceiling square edged tiles astra at all heights of size 595X595X15 mm. The tiles should have Humidity Resistance (RH) of 90%, thermal insulation ≥ 0.5 (m² k / w) & moisture rate ≤ 1% (JC/T670 – 2005), light Reflectance of >85%, and fire retardant as per Class A in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.30 mm thickness (galvanized @120 gsm) comprising main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle ofsize24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre& 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 15 mm thick micro-look soft fiber white false ceiling tile (NRC 0.9 to 1) |
| 30 | Providing and fixing 12mm toughened glass glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) |
| 31 | Providing and fixing L Type Stainless Steel handle 300mm of approved quality & make with necessary screws etc all complete. |
| 32 | Providing, Supplying & Installation conference Table Regular Shape with modules each L675 x W600 x H750 and H+End modules 700x700x750mm and two corner duly edge banding with 2mm pvc edge banding fixed with hot melt glue . Top 36mm MDF board with prelaminated duly one side post formed and another side 2mm thick PVC Edge banding with hot melt glue. Under structure gable end 18mm pre laminated board duly edge banding and modesty panel 18mm pre laminated particle board duly edge banding grade II Type III IS12823.Dual seater 675x600x750 – 10Nos.Single seater 600x6000x750 – 2 Nos. with two cornerSize: 3375 x 1800 x 750 mm – 11seater |
| 33 | Providing and supplying high back Chairperson chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with adjustable lumbar support. The chair shall be supplied with injection moulded MS Chrome plated top upholstered with padded leathrite cover fixed arm completely joint with seat. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with class-3 gas-lift to suit them using the lever under the seat. The pedestal should have five legged injection moulded MS Chrome Plated having pitch circle Dia. 600 mm fitted with 5 nos. twin wheel castors. . The seat size shall be 465±10 mm(W) X 500±10 mm(D) and back size shall be 555±10 mm(H) from seat & overall height = 1150±10 mm. |
| 34 | Providing and supplying Mid back conference chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with adjustable lumbar support. The chair shall be supplied with injection moulded MS Chrome plated top upholstered with padded leathrite cover fixed arm completely joint with seat. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with class-3 gas-lift to suit them using the lever under the seat. The pedestal should have five legged injection moulded MS Chrome Plated having pitch circle Dia. 600 mm fitted with 5 nos. twin wheel castors. . The seat size shall be 465±10 mm(W) X 500±10 mm(D) and back size shall be 555±10 mm(H) from seat & overall height = 850±10 mm. |
| 35 | Providing and supplying & installation 60mm Customized work space should be partition thickness 60mm thick partition inner frame is 1.1mm thick aluminium. The partition having horizontal and vertical trims cover are made out of extruded aluminum duly powder coating 50 micron special fixtures in the partition. shelf have provision for pin up board with fabric /white marker/laminated of approved shade Partition frame work shall have adequate provision for the movement of electric data cable At desired 2 levels. One at skirting and one above the top and one below the table top. Top having made of 25mm pre laminated board duly edge banding having race way Workspace have one keyboard 18mm prelaminated particle board duly post forming and having 1 CPU trolley made of 18mm prelaminated particle board duly edge bending Workspace size 935x 600 x P height 1200mm |
| 36 | Providing & Supplying workstation chair made up of teakwood fully polished seat cushioned. |
| 37 | Providing and supplying 3 seater Sofa - The seat is made up of PU foam in density 28+/-2KG/cu meter with an additional top layer of super soft PU foamof density 32+/-2 kg/cu meter, upholstered with fabric or leaterette. The back is madeup of PU foam in density 28+/-2KG/cu meter with two additional top layer of super soft PU foam of density 32+/-2 kg/cu meter, upholstered leather. Under structure is made up of 1.2+/-cm thick hot presses plywood moisture resistant and termite proof as per IS : 303 and pinewood of cross sections devoid of major knots and surface defects.6Nos per seat and 3.8mm dia zig zag spring assembly is mounted over under structure for cushioning purpose. Leg assembly is a welded assembly made is stainless steel grade SS302 tube and plate with plastic end cap. Size :- 1900mmW X750mmDX735mm HT. |
| 38 | Providing and supplying 2 seater Sofa - The seat is made up of PU foam in density 28+/-2KG/cu meter with an additional top layer of super soft PU foamof density 32+/-2 kg/cu meter, upholstered with fabric or leaterette. The back is madeup of PU foam in density 28+/-2KG/cu meter with two additional top layer of super soft PU foam of density 32+/-2 kg/cu meter, upholstered leather. Under structure is made up of 1.2+/-cm thick hot presses plywood moisture resistant and termite proof as per IS:303 and pinewood of cross sections devoid of major knots and surface defects. 6Nos per seat and 3.8mm dia zig zag spring assembly is mounted over under structure for cushioning purpose. Leg assembly is a welded assembly made is stainless steel grade SS302 tube and plate with plastic end cap. Size:-1400mmW X 750mmD X 735mm HT. |
| 39 | Providing and supplying CENTRE TABLE Size: 1200(W) x 600(D) x 425(H) Centre Table made with 22mm steel frame duly chromeplated with 8 mm glass top. |
| 40 | Providing & Supplying Metal shoe rack having 12 open type slot for shoes open type. Size: 1800 x 900 x 450 mm |
| 41 | Providing and supplying the lab table is of size 3850 × 750 × 750 mm. It is provided with three box unit consisting of 1 drawer and 2 shutters, fabricated from 1.0 mm thick CRCA sheet and duly powder-coated. In addition, three drawer units are also provided, made of 1.0 mm thick CRCA sheet with powder coating. The drawers are mounted on telescopic channels for smooth operation. The legs are constructed from 50 × 50 × 1.2 mm CRCA pipe, duly powder-coated. The lab table is supplied with a granite top. |
| 42 | Providing and supplying the lab table is of size 3200 × 750 × 750 mm. It is provided with three box unit consisting of 1 drawer and 2 shutters, fabricated from 1.0 mm thick CRCA sheet and duly powder-coated. In addition, three drawer units are also provided, made of 1.0 mm thick CRCA sheet with powder coating. The drawers are mounted on telescopic channels for smooth operation. The legs are constructed from 50 × 50 × 1.2 mm CRCA pipe, duly powder-coated. The lab table is supplied with a granite top. |
| 43 | Providing and supplying the lab table is of size 2950 × 750 × 750 mm. It is provided with three box unit consisting of 1 drawer and 2 shutters, fabricated from 1.0 mm thick CRCA sheet and duly powder-coated. In addition, three drawer units are also provided, made of 1.0 mm thick CRCA sheet with powder coating. The drawers are mounted on telescopic channels for smooth operation. The legs are constructed from 50 × 50 × 1.2 mm CRCA pipe, duly powder-coated. The lab table is supplied with a granite top. |
| 44 | Providing & Supplying Server Rack 42U 800*1000 Fan tray with 4 fan-1 PDU 12 socket 5/15 Amp-2 Shelf-1 Hardware packet – 2 |
| 45 | Providing & Fixing Roller Blinds made up from high-quality polyester fabric suitable for light control, with effective UV protection and smooth surface finish. The blind shall be operated through a side-mounted beaded chain mechanism with a heavy-duty clutch ensuring smooth and effortless operation. The fabric shall be neatly wound over an aluminium roller tube of adequate diameter to prevent sagging and ensure durability. The blind shall be provided with an aluminium bottom rail for proper tension and uniform appearance. All necessary brackets, accessories, fixing hardware, and supports required for wall or ceiling mounting shall be included. The colour and finish of the blind shall be as approved by the competent authority. Installation shall be complete in all respects. |
| 46 | Providing & Supplying Overhead Storage made of 18mm Pre laminated board side shelf top & Bottom duly PVC edge banding with hot glue with locking system.Size: 900 x 750 x 450 mm |
| 47 | Providing & Supplying Revolving Lab Stool with back support, Seat made up of PU Leather, while the frame and base are often chrome-plated steel. A circular footrest is included for comfort. It has castor wheels for mobility. |
| 48 | SH-I :- Internal EI Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C |
| 49 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 50 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 51 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 52 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 53 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 54 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm |
| 55 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 56 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 57 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) |
| 58 | Supplying and fixing RJ-45 Data socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 59 | Supplying and installing following size of GI floor raceway of thickness not less than 1.6 mm and height/depth not less than 38mm, necessary Fixing bracket, coupler, riser (90 degree angle)all necessary accessories i/c fixing on the wall/floor (recess) etc as reqd 225 mm |
| 60 | Supplying and installation of floor Junction/ Crossover box for tiles/ marble floor for receway upto 225 mm with all necessary accessories & following Size etc complete as reqd. 300 x 300 x 55-70 m |
| 61 | Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted 275 Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required. 1 Run of cable |
| 62 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4 + 36), Double door |
| 63 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door |
| 64 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 65 | Double pole |
| 66 | Triple pole |
| 67 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 125 A, 16 KA,TPMCCB |
| 68 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A |
| 69 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 70 | SITC of 400 mm cabin / wall fan with all accessories on the existing wall with the help of fastener i/c connection etc. complete as reqd. |
| 71 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos. of 3 pin 5/6 & 1 No. of 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch and 1 No. blanking plate connection etc. as required. (For computer point) |
| 72 | Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 73 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 74 | Supplying and Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power Al. Armoured cable of 1.1 KV grade of following size on wall surface as required. 3.5 x 70 sqmm |
| 75 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 70 sq. mm (38mm) |
| 76 | Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80,UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K/ 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) 36 watt |
| 77 | SH-II VRV/VRF System Supplying, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100% hermetically sealed inverter type twin Rotary/Scroll Compressor(s),minimum two compressors (with individual separate PCB) for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with suitable foundation etc. complete as required. To have better efficiency condensor fan shall be capable to operate at different speed with respect to load.The unit shall deliver the rated capacity and in confirmation as per IS 18728:2024 and CPWD Specifications and work even at 50°C ambient temperature without tripping. The system shall be able to deliver 100% of the rated capacity upto 39 °C. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant and ready for use as required. The condenser should be coated with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion, and reduce the risk of degradation, thereby improving overall performance and durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD specification, connections, inter connections etc. as required. (For capacity <40 kWr ISEER 6.4, Capacity > 40 and <70 ISEER 6.5, Capacity > 70 ISEER 6.6 for ECSBC+ Building) For Cooling or Heating or Both. 14 HP to 22 HP |
| 78 | Supplying, Installation, Testing and Commissioning of following minimum capacity 4 way Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement in auto mode. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor) 2.0 TR |
| 79 | 2.6 TR |
| 80 | Supplying, Installation, Testing and Commissioning of Y/T/Multi Joints. Joints shall be of same Original Equipment Manufacturer (OEM) make as of ODUs and IDUs Indoor Units |
| 81 | Supply installation testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRF/VRV system,complete with fittings,with suitable adjustable ring type hanger supports, jointng / brazing including accesories insulated with XLPE Class O tubular insulation/with Class O closed cell elastemeric nitrile rubber tubular sleeves sections of specified thickness as below for Suction and Liquid lines, all accessories as per specification etc as required: 9.5 mm dia (OD) (soft drawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 82 | 12.7 mm dia (OD) (soft drawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 83 | 15.86 mm dia (OD) (soft drawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 84 | 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 85 | 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 86 | 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 87 | Supply, installation testing & commissioning of rigid UPVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation. 32 mm dia (with 6 mm nitrile rubber Insulation) |
| 88 | 40 mm dia (with 6 mm nitrile rubber Insulation) |
| 89 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts &nuts, fastner etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness |
| 90 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 91 | Supply and installation of control cum transmission wiring of 2 core x 1.5 sqmm copper Unarmoured in suitable fittings between indoor and outdoor units on surface / conduit / pipe / cable tray / open duct etc. complete as required. |
| 92 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm |
| 93 | Supplying and Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power copper Armoured power cable of 1.1 KV grade of following size on cable tray complete etc as required. 4 x 10 sqmm |
| 94 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 x 10 sq. mm (25mm) |
| 95 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A |
| 96 | ITC of weather proof pole box made out of hot moulded SMC sheet with clamp /fastner neutral link strip, gland thimble and 1 No. 6 Amps SPMCB Complete with inter connection with copper wire, earthing (Box Size - 300mm x 200 mm x 105 mm) |
| 97 | Supplying, charging and Top up of Refrigerant gas R-410A gas in the exising VRV/VRF system i/c pressure testing, flushing the system complete etc as reqd. |
| 98 | SH-III:- AV SystemSITC of High performance Digital Wired Desktop Chairman Unit with High-directivity gooseneck condenser micro phone with red LED indicator ring, Microphone stem length 220mm, Low-voltage DC24V operation for enhanced safety, Signal to Noise ratio ≥65dB, Chairman-specific controls: Priority override, Delegate microphone mute, Speech request approval and management, 1.8-inch color TFT display screen showing real-time meeting data, Third-party system integration via RS-232, enabling camera tracking and remote microphone control, Optimal speaking distance: 10 - 40 cm; intelligent noise suppression effective up to 1 meter, etc complete as required. |
| 99 | SITC of High performance Digital Wired Desktop Delegate Unit with High-directivity gooseneck condenser micro phone with red LED indicator ring, Microphone stem length 220mm, Low-voltage DC24V operation for enhanced safety, Signal to Noise ratio ≥65dB, 1.8-inch color TFT display screen showing real-time meeting data, Third-party system integration via RS-232, enabling camera tracking and remote microphone control, Optimal speaking distance: 10 - 40 cm; intelligent noise suppression effective up to 1 meter, etc completed as required. |
| 100 | SITC of High performance digital wired conference controller unit Directly connects up to 60 units, expandable to 250 units with extension modules, Maximum power consumption 120W, RS-232 control support for third-party central control integration (camera tracking, microphone management, and meeting modes), 4-in/1-out seamless HDMI switcher, supporting 4 cameras at 1080p@60Hz with zero switching delay, PELCO-D, PELCO-P, VISCA via RS-485 interface, etc completed as required. |
| 101 | SITC of High quality compact two way coaxial ceiling speaker with 5.25” Polypropylene woofer with rubber surround for extended low frequency response, 0.75” Polycarbonate tweeter with swivel mount for high frequency directivity, Driver Power Handling 30W RMS / 60W Program / 120W Peak, Calculated Max SPL 104dB Continuous / 107dB Program / 110dB Peak, Frequency Response (-10db) 58Hz – 20KHz, High performance 100V LMT inbuilt – 15W and 10W selectable via switch, etc complete as required. |
| 102 | SITC of High performance 2-way Indoor / Outdoor full range speaker with 4” ( 1.5\\" ) VC , 1 x 0.8’’ dome tweeter High Frequency driver, Power Handling (AES Standard) 40W RMS / 80W Program / 160W Peak or above, Nominal Impedance 16ohm, Frequency Response 70Hz – 20KHz or better, Average Sensitivity 88dB/W/m or above , Calculated Max SPL 110dB Peak or better , Nominal Directivity - 90º x 60º conical better, ete as required. |
| 103 | SITC of Mixer amplifer with Total output all channels driven: 480W, 4-16 ohm, 70V/100V output, USB/Bluetooth Media player, 3 Aux and 2 microphone inputs, Signal-to-Noise Ratio >75dB, toroidal transformer, Master, Bass & Treble controls for tailored audio tuning Aux output available for daisy chaining amplifiers or to attach active subwoofers to expand your audio setupetc as reqd. |
| 104 | SITC of High Performance UHF Digital Wireless Dual Handheld & Lavalier COMBO Microphone System, 200 selectable frequencies, RF Carrier Frequency Range - CH1: 612.000 - 651.600 MHz (100 Selectable Frequencies) CH2: 652.000 - 691.600 MHz (100 Selectable Frequencies), Audio Frequency Range - 30Hz ~ 20 kHz, Signal-to-noise (A-weighted) - 120dB(A) , RF output - 50 mW max, Oscillation Mode -Inside the chip VCO oscillation True Diversity dual reciever, Dual channel 19” one U rack mount receiver with four antennas, One wireless handheld transmitter and one wireless bodypack transmitter with one lavalier & head worn microphone set, etc complete as required. |
| 105 | SITC of 75'' Interactive Touch Display with Panel Technology - IPS/ Direct - LED, Aspect Ratio -16:9, Resolution - 3840 x 2160 - 4k UHD, Brightness* - 350 cd/m2, Inbuilt Memory 4 GB RAM & 32 GB memory, Android: v11.0, CPU : Quad Core, Estimated Life Time: 50000 Hrs (Typical), Viewing Angle (HxV) - 178x178, Touch Technology: Infrared, Touch Point: 20, Response Time: 8ms, Surface Protection: 4mm Thick Touchened Glass, Touch Tools: Finger, Stylus, Glove, Opaque objects, Inputs: 1 x mini AV / 1 x HDMI 2.0, Output: 1 x Coax, 1 x Mini AV, 1 x Earphone Out / 1 x USB-B, 1 x USB-A 2.0, 1x USB-A3.0, 3x USB-A 3.0, 1x USB-B 3.0, 1xUSB-C, 1x RJP45 Input, 1x RJP output, 1 x RS232C, 3+1 (WiFi + Bluetooth), Expansion: Windows OPS: Intel Statandard 80 Pin OPS - Optionals, etc complete as required. |
| 106 | SITC of 12X PTZ Camera with Video Interfaces 1x USB 3.0, 1x LAN Ix RS232 1x DVI/HDMI, Video Compression Format H.264. H.265, Dual stream Output Control Protocol VISCA/Pelco-D/Pelco-P, Baud Rate 115200/9600/4800/2400bps Resolution Full HD, Audio compression Format AAC/MP3 Audio, LAN Port 100M IP port (100BASE-TX), Support, VISCA protocol control through IP port, Network Protocol RTSP, RTMP, ONVIF,GB/T28181, Power Interface HEC3800 outlet (DC12V) |
| 107 | SITC of 2 x 4 HDMI 4K60 Matrix switcher with AV Interface: HDMI, Interface Standard: HDMI 1.4a, Supports Bandwidth: 10.2 Gbps, Maximum Resolution: 4096x2160@30Hz 4:4:4 8bit, HDCP Support: 1.4, Supported Audio: Audio Pass-through, IR Support : 30- 60kHz, Control: IR, Push Button, RS-232, Special Features: EDID Management, etc complete as required. |
| 108 | Supply,Installation, Testing & Commissioning of HDMI Extender Kit. Must extend over ethernet cable HD singal minimum upto 60 mtrs & 4K UHD signal minimum upto 40 mtrs. Must require no adjustment or Tunning. HDMI 1.4 Compliant, HDBaseT, HDCP compliant, Must Support Embedded HDMI Audio, Including Dolby® TrueHD and DTS-HD Master Audio. Bandwidth: 3.4 Gbps or better, should Supports HD 3D formats & PC resolutions up to WUXGA, HDCP Repeater and CEC bypass, Bi-directional infrared remote control extensions. Operating temperature: 0 to 40°C or better & Storage temperature: -20 to 60°C or better etc as reqd. |
| 109 | Supply,Installation, Testing &Commissioning of Pop-up Cable Cubby having 1 no. HDMI, 1 RJ45 and 1 no. power socket etc. as required. |
| 110 | Supply,Installation, Testing & Commissioning of HDMI to HDMI cable 1.5 Mtr etc. as reqd. |
| 111 | Supply,Installation, Testing & Commissioning of 18U pre-wired Audio Equipment’s Rack front lockable glass door, fan tray for cooling, caster wheels base, main panel with spike buster, individual fuse power supply unit, including all internal wiring, etc as required. |
| 112 | SITC of shieled CAT 6, STP cable along with compatible connectors in the existing surface / recessed steel / PVC as required. 2 Mtrs |
| 113 | SITC of shieled CAT 6, STP cable along with compatible connectors in the existing surface / recessed steel / PVC as required. 15 Mtrs complete etc as required. |
| 114 | Supply Laying & Fixing of of Microphone lines high grade, professional low-noise, 2 crore high conductivity PVC insulated in PVC jacket, shielded copper cable with Di- electric insulator both end with XLR m/f connector as required. |
| 115 | Supply Laying & Fixing of speaker b lines: 2 core, 1.5 sq mm high defintion speaker cable, PVC insulated in PVC jacket laid in existing conduits as reqd. |
| 116 | SH-IV:- Credit of Dismantled materialLess Credit cost for following old dismantled materials Ceiling fan |
| 117 | LED Panel light 2x2 ft. |
| 118 | 1.5 to 2.0 TR Air conditioner Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
