|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (upto all width on plan), including dressing of sides and ramming of bottoms,upto all lifts including getting out the excavated soil and disposal of surplus excavated soil as directed, withi all leads and lifts. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering including carriage of material in all leads and lifts. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including carriage of material in all leads and lifts. All work up to plinth level |
| 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including carriage of material in all leads and lifts. |
| 4 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of material in all leads and lifts. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of formwork including carriage of material in all leads and lifts. Suspended floors, roofs, landings,balconies and access platform |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inpositionand binding all complete above plinth level/Above plinth level including carriage of material in all leads and lifts.Thermo-Mechanically Treated bars of gradeFe-500D or more. |
| 7 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge including carriage of material in all leads and lifts. All works upto plinth level/above plinth level. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth including carriage of material in all leads and lifts. in Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including carriage of material in all leads and lifts. In Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 10 | Providing and fixing Ist quality ceramic glazed Wall tiles/ Floor Tile conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material in all leads and lifts. |
| 11 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material in all leads and lifts. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 12 | Providing and laying vitrified floor /wall tiles in any sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all leads and lifts. |
| 13 | 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts. |
| 14 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) including carriage of material in all leads and lifts. |
| 15 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 16 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 17 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. Two or more coats applied @1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including carriage of material in all leads and lifts. |
| 18 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material in all leads and lifts. |
| 19 | Repairs to plaster of thickness 12mm to20mm in patches of area 2.5 sq.meters and under, including cuttingthepatchinpropershape, rakingout jointsand preparing and plastering the surface of the walls complete, includingdisposal of rubbish to thedumping ground, all complete as per direction of Engineer-in Charge including carriage of material in all leads and lifts. With cement mortar1:4(1cement: 4coarse sand) |
| 20 | Providing & fixing White vitreous china water closet squatting pan (Indian type) including PVC Cistern along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge including carriage of material in all leads and lifts. Orissa pattern W.C Pan of size 580x440 mm |
| 21 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge including carriage of material in all leads and lifts. In cement mortar |
| 22 | Providing and fixing G.I. welded wire mesh fabric fencing of required width including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge including carriage of material in all leads and lifts. Made of G.I. wire of dia 4 mm |
| 23 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including carriage of material in all leads and lifts. |
| 24 | Providing and fixing brass bib cock of approved quality including carriage of material in all leads and lifts. 15 mm nominal bore |
| 25 | Providing and fixing brass stop cock of approved quality including carriage of material in all leads and lifts 15mm nominal boe. |
| 26 | Providing and fixing uplasticised PVC connection pipe with brass unions including carriage of material in all leads and lifts. 45cm long |
| 27 | Providing and fixing high pressure PVC spigot and socket soil waste and ventilating pipes including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts. 110mm dia. Please Enable Macros to View BoQ information |
